ABSTRACT
Innovations and new technologies allow companies to function, work, and develop in an ever-changing environment. The article discusses the importance of innovative strategies and presents the results of research carried out on the role of each employee group (CEO, R+D department, other workers) in implementing innovations, depending on the size of the enterprise: micro company, mini company, medium company, and large company. A look not only through the prism of the size of the organization, but also by the groups of people (knowledge group) responsible for innovation is a novelty of the research and fills the gap in research on innovation of enterprises. Moreover, as an exemplification of theory which is used in practice, the article also presents innovations related to bamboo use in many enterprises from different sectors of the economy (energy, automobile, and textile). Bamboo, thanks to its mechanical and chemical properties, can become an innovative material widely used by various companies. Innovations based on the use of bamboo become eco-innovations that support eco-efficiency and the circular economy. The cognitive and utilitarian value of completed research lies in the possibility of a broad look at the innovation strategy (including bamboo as an innovative material) and in the possibility of its implementation and application in various enterprises operating on the market.
ABSTRACT
Iron/silica core-shell microparticles (IMPs) were functionalized by different functional groups including amine, glycidoxy, phenyl, and thiocyanate. Many of the IMPs modifications are reported for the first time. The resulting surface chemistry turned out to affect the properties of magnetic alginate hydrogels fabricated from sodium alginate and dispersed IMPs. Differences in magnetorheological properties of the obtained magnetic hydrogels can be at least partially attributed to the interactions between alginate and surface functionalities of IMPs. Density Functional Theory (DFT) calculations were carried out to get detailed insight into those interactions in order to link them with the observed macroscopic properties of the obtained hydrogels. For example, amine groups on the IMPs surface resulted in well-formed hydrogels while the presence of thiocyanate or phenyl groups - in poorly formed ones. This observation can be used for tuning the properties of various carbohydrate-based hydrogels.
ABSTRACT
ß-Hydroxyalkylphosphine sulfides undergo [1,3]- or [1,4]-sulfur atom phosphorus-to-carbon migration in the presence of Lewis or Brønsted acids. The direction of sulfur atom migration depends on the type of acid used for the reaction. In the presence of a Brønsted acid, mainly [1,3]-rearrangement is observed, whereas a Lewis acid catalyzes the [1,4]-sulfur migration. To gain insight into the mechanism of these transformations, the stereochemistry of these rearrangements have been tested, along with the conduction of some control experiments and DFT calculations.
ABSTRACT
Diabetes mellitus is a non-communicable disease entity currently constituting one of the most significant health problems. The development of effective therapeutic strategies for the prevention and/or treatment of diabetes mellitus based on the selection of methods to restore and maintain blood glucose homeostasis is still in progress. Among the different courses of action, inhibition of dipeptidyl peptidase IV (DPP-IV) can improve blood glucose control in diabetic patients. Pharmacological therapy offering synthetic drugs is commonly used. In addition to medication, dietary intervention may be effective in combating metabolic disturbances caused by diabetes mellitus. Food proteins as a source of biologically active sequences are a potential source of anti-diabetic peptides (DPP-IV inhibitors and glucose uptake stimulating peptides). This study showed that in silico pork meat proteins digested with gastrointestinal enzymes are a potential source of bioactive peptides with a high potential to control blood glucose levels in patients with type 2 diabetes mellitus. Analysis revealed that the sequences released during in silico digestion were small dipeptides (with an average weight of 270.07 g mol-1), and most were poorly soluble in water. The selected electron properties of the peptides with the highest bioactivity index (i.e., GF, MW, MF, PF, PW) were described using the DFT method. The contribution of hydrophobic amino acids, in particular Phe and Trp, in forming the anti-diabetic properties of peptides released from pork meat was emphasized.
Subject(s)
Computer Simulation , Diabetes Mellitus, Type 2/drug therapy , Dipeptidyl-Peptidase IV Inhibitors/pharmacology , Glucose/metabolism , Hypoglycemic Agents , Meat Proteins/pharmacology , Animals , Blood Glucose/analysis , Blood Glucose/drug effects , Chemical Phenomena , Chymotrypsin/metabolism , Diabetes Mellitus, Type 2/blood , Dipeptides/chemistry , Dipeptides/pharmacology , Dipeptidyl-Peptidase IV Inhibitors/chemistry , Humans , Meat Proteins/chemistry , Meat Proteins/metabolism , Pepsin A/metabolism , Sus scrofa , Trypsin/metabolismABSTRACT
The simple procedure of calculating the infrared spectra of polymers is presented. It is based on selecting the relevant, medium-size representative fragments of a polymer, for which the vibrational frequencies are computed within the harmonic approximation, in conjunction with the multiparameter scaling techniques. Scaling is necessary to predict the reliable fundamentals, which, along with the calculated intensities and properly chosen band widths, reproduce the observed band shapes with high accuracy. Applications to the three polymers: poly(methyl methacrylate), poly(vinyl acetate), and poly(isopropenyl acetate) are presented. The simulated spectra are in good agreement with the experiment. The assignment of bands is reported. The obtained results indicate strong delocalization of the vibrational modes within polymers, which is in accord with the most recent experimental finding [Macromolecules2008, 41, 2494-2501]. Good agreement between the observed and the calculated spectra of deuterated PMMA confirms the correctness of our approach. The preliminary results obtained for the highly irregular macromolecular compound (vinyl-functionalized silica) are also shown.
ABSTRACT
An extended database of scaling factors for calculating fundamental frequencies within multiparameter scaled quantum mechanical (SQM) force field, and effective scaling frequency factor (ESFF) methods, based on various DFT force fields is reported. Twenty-six density functionals have been examined in conjunction with various Pople's and Dunning's basis sets of VDZ and VTZ quality. The calculations were based on a standard training set of 30 molecules proposed by Baker et al., for which 660 vibrational modes were assigned. Six functionals turned out to be particularly well-suited to the calculations oriented toward determination of scaled frequencies. They are B3LYP, B3PW91, B97, B97-1, B97-2, and O3LYP; they are all capable of providing reasonable scaled frequencies even for the small, 6-31G* basis set (rms <15 cm(-1)). Correlations between the quality of the scaled frequencies and the basis set quality as well as the accuracy of the predicted molecular geometry were investigated. The 6-311+G** basis set turned out to be preferable. In addition, correlation between the rms values in the scaled frequencies and the errors in the predicted geometric parameters was found. Both 11- and 9-parameter scaling frames are compared. It is shown that 9-parameter scaling is preferable in the middle range of the vibrational spectrum (500-2500 cm(-1)), provided it was based on high-quality force fields. Finally, statistical uncertainties of the calculated scaling factors are reported.
ABSTRACT
Quantum chemistry SCF/GIAO calculations were carried out on a set of compounds containing diastereotopic protons. Five molecules, including recently synthesized 1,3-di(2,3-epoxypropoxy)benzene, containing the chiral or pro-chiral center and the neighboring methylene group, were chosen. The rotational averages (i.e. normalized averages with respect to the rotation about the torsional angle τ with the exponential energy weight at temperature T) calculated individually for each of the methylene protons in 1,3-di(2,3-epoxypropoxy)benzene differ by ca. 0.6 ppm, which is significantly less than the value calculated for the lowest energy conformer. This value turned out to be low enough to guarantee the proper ordering of theoretical chemical shifts, supporting the interpretation of the (1)H NMR spectrum of this important compound. The rotational averages of chemical shifts for methylene protons for a given type of conformer are shown to be essentially equal to the Boltzmann averages (here, the population-weighted averages for the individual conformers representing minima on the E(τ) cross-section). The calculated Boltzmann averages in the representative conformational space may exhibit completely different ordering as compared to the chemical shifts calculated for the lowest-energy conformer. This is especially true in the case of molecules, for which no significant steric effects are present. In this case, only Boltzmann averages account for the experimental pattern of proton signals. In addition, better overall agreement with experiment (lower value of the root-mean-square deviation between calculated and measured chemical shifts) is typically obtained when Boltzmann averages are used.
Subject(s)
Magnetic Resonance Spectroscopy/methods , Methane/chemistry , Models, Chemical , Models, Molecular , Computer Simulation , Protein Conformation , Protons , StereoisomerismABSTRACT
Multi-parameter scaling techniques, such as Scaled Quantum Mechanical (SQM) force field [J. Am. Chem. Soc. 105 (1983) 7037-7047; J. Phys. Chem. A 102 (1998) 1412-1424] or Effective Scaling Frequency Factor (ESFF) [Chem. Phys. Lett. 446 (2007) 191-198; J. Mol. Spectrosc. 264 (2010) 66-74] techniques, are very powerful in the theoretical prediction of the vibrational spectra of complex molecules. In the present work sets of transferable SQM and ESFF scaling factors (within the valence coordinates based schemes) that can be applied to silicon- and sulfur(II)-containing compounds have been determined. A number of VDZ- and VTZ-quality basis sets were used in conjunction with the B3LYP density functional. Eight molecules typically used in the synthesis of silica-based materials were chosen, and theoretical modes were assigned to bands detected on their IR or Raman spectra. This set was augmented with a set of 10 auxiliary, sulfur(II)-containing molecules, for which only "pure" vibrations involving S-containing motifs were assigned. This led to the set of more than 600 individual vibrations. Five factors attributed to these motifs were optimized. Scaling factors attributed to the characteristic types of internal coordinates including the second-row atoms and chlorine, which are applicable to the present molecules were preset. Their values, optimized for Baker's training set of molecules [J. Phys. Chem. A 102 (1998) 1412-1424] for all basis sets considered in this work, were also found, extending thus the applicability of the multi-parameter scaling methods. New scaling factors exhibit low statistical uncertainties. Reasonable agreement between experimental and SQM- or ESFF-scaled frequencies was obtained even for the 6-31G* basis set (RMS<12cm(-1)); extension of the basis set by adding polarization function on hydrogen atoms and/or diffuse functions provides significant improvement of the results, for which the RMS values are often (well) below 10 cm(-1). In addition, SQM scaling factors were found to occasionally exhibit large deviations from unity, which is to be contrasted with ESFF scaling factors.
Subject(s)
Quantum Theory , Silicon Compounds/chemistry , Sulfur Compounds/chemistry , Vibration , Computer Simulation , Hydrogen Bonding , Spectroscopy, Fourier Transform Infrared , Spectrum Analysis, Raman , Sulfhydryl Compounds/chemistryABSTRACT
The DFT calculations at the B3LYP level with 6-311G** basis set were carried out in order to reveal whether tautomerization or decarboxylation is responsible for the instability of 2,2-di(pyridin-2-yl)acetic (DPA) and 1,8-diazafluorene-9-carboxylic (DAF) acids. The carboxyl protons in both compounds are involved in the intramolecular hydrogen bonds (the pyridine nitrogen atoms are the hydrogen bond acceptors). Although formation of two intramolecular OH · · · N hydrogen bonds in the enols of both carboxylic acids enables effective electron delocalization within the quasi rings (· · · HO - C = C - C = N), only ene-1,1-diol of DAF has somewhat lower energy than DAF itself (ΔE is ca. 7 kcal mol(-1)). DPA and its enediol have comparable energies. Migration of the methine proton toward the carbonyl oxygen atom (to form enediols) requires overstepping the energy barriers of 55-57 kcal mol(-1) for both DPA and DAF. The enaminone tautomers of the acids, formed by migration of this proton toward the pyridine nitrogen atom, are thermodynamically somewhat more stable than the respective enediols. The energy barriers of these processes are equal to ca. 44 and 62 kcal mol(-1) for DPA and DAF, respectively. Thus, such tautomerization of the acids is not likely to proceed. On the other hand, the distinct energetic effects (ca. 15 kcal mol(-1)) favor decarboxylation. This process involves formation of (E)-2-(pyridin-2(1H)-ylidenemethyl)pyridine and its cyclic analogue followed by their tautomerization to (dipyridin-2-yl)methane and 1,8-diazafluorene, respectively. Although the later compound was found to be somewhat thermodynamically more stable, kinetic control of tautomerization of the former is more distinct.
Subject(s)
Acetates/chemistry , Acetates/metabolism , Chemical Phenomena , Computer Simulation , Decarboxylation , Models, ChemicalABSTRACT
Scaling of harmonic frequencies of a molecule is one of the methods of improving the agreement between the calculated from a quadratic force field and experimental vibrational spectrum. An application of the recently proposed effective scaling frequency factor (ESFF) method to the complicated 1,2,4-triazole derivatives is presented. The calculations are based on the DFT/B3LYP/6-311G** quadratic force fields. It is shown that the ESFF method is capable of providing the high-quality spectra with regard to the scaled frequencies, comparable to these obtained with the well-established scaled quantum mechanical (SQM) force field method. Using the recommended scaling factors for the 11-parameter calculations, the RMS value obtained for a set of 293 vibrational modes of four compounds is only 8.7 and 8.5cm(-1), for SQM and ESFF, respectively, provided the hydrogen bonded C=O bond was excluded from the general non-hydrogen XX stretch group, and the scaling factor attributed to this bond was optimized. The new, 9-parameter set of scaling factors provides SQM- and ESFF-scaled frequencies that are of comparable quality to those of the 11-parameter calculations. In addition, it provides (on average) more reliable band splittings in the middle region of the spectrum, and the order of the scaled frequencies corresponds to that of the experimental bands. The straightforward application of the ESFF method to estimate the value of the scaled frequency is also presented.
Subject(s)
Models, Chemical , Triazoles/chemistry , VibrationABSTRACT
Using quantum chemistry methods we have evaluated the solvent effects on the (14)N NMR chemical shifts in five oxa- and oxadiazoles dissolved in twelve solvents. These solvents differ in their polarity with the dielectric constants varying from 2 to 80. Moreover, three of them have a hydrogen-bond donor character. All possible hydrogen-bonding in the water solution with the oxygen and nitrogen (hydrogen-acceptor) centers in oxazoles (2) and oxadiazoles (3) have been considered in our studies. It has been shown that both the pure solvent and hydrogen-bonding effects are significant and result in (14)N magnetic shielding increase. In water solutions the pure solvent effect is larger than the hydrogen-bonding effect. In addition, the solvent effect has been analyzed in terms of its direct and indirect contributions. It should be emphasized that our theoretical results for (14)N chemical shifts in oxa- and oxadiazoles remain in a very good agreement with the accurate experimental data.