Core-Double-Shell TiO2@Fe3O4@C Microspheres with Enhanced Cycling Performance as Anode Materials for Lithium-Ion Batteries.

Due to the volume expansion effect during charge and discharge processes, the application of transition metal oxide anode materials in lithium-ion batteries is limited. Composite materials and carbon coating are often considered feasible improvement methods. In this study, three types of TiO2@Fe3O4@C microspheres with a core-double-shell structure, namely TFCS (TiO2@Fe3O4@C with 0.0119 g PVP), TFCM (TiO2@Fe3O4@C with 0.0238 g PVP), and TFCL (TiO2@Fe3O4@C with 0.0476 g PVP), were prepared using PVP (polyvinylpyrrolidone) as the carbon source through homogeneous precipitation and high-temperature carbonization methods. After 500 cycles at a current density of 2 C, the specific capacities of these three microspheres are all higher than that of TiO2@Fe2O3 with significantly improved cycling stability. Among them, TFCM exhibits the highest specific capacity of 328.3 mAh·g-1, which was attributed to the amorphous carbon layer effectively mitigating the capacity decay caused by the volume expansion of iron oxide during charge and discharge processes. Additionally, the carbon coating layer enhances the electrical conductivity of the TiO2@Fe3O4@C materials, thereby improving their rate performance. Within the range of 100 to 1600 mA·g-1, the capacity retention rates for TiO2@Fe2O3, TFCS, TFCM, and TFCL are 27.2%, 35.2%, 35.9%, and 36.9%, respectively. This study provides insights into the development of new lithium-ion battery anode materials based on Ti and Fe oxides with the abundance and environmental friendliness of iron, titanium, and carbon resources in TiO2@Fe3O4@C microsphere anode materials, making this strategy potentially applicable.

Formation mechanisms and environmental influences on the crystal growth of wulfenite.

In this study, we introduce a novel approach using correlative analysis techniques to unravel detailed insights into the environmental influences on crystal growth. Tabular and bipyramidal wulfenite samples from the Mezica mine in north-eastern Slovenia were analysed to combine the morphological aspects of crystal growth with the atomic-resolution reconstruction of the positions of lead (Pb) and molybdenum (Mo) atoms in the parent crystal lattice. These combined data also allow us to present the formation mechanism that enables the development of bipyramidal or tabular morphologies in wulfenite. The bipyramidal and tabular crystals are chemically pure wulfenite (PbMoO4), as confirmed by various advanced diffraction and spectroscopy techniques. However, each habit includes multiple inclusions, mostly consisting of carbonates, Pb-Fe oxides, Pb oxides and, more rarely, Pb vanadate (descloizite). The differences in the morphologies can be attributed to compositional changes during precipitation from a meteoric solution and thus, we propose a growth mechanism consisting of three different phases of growth. This innovative approach emphasises the importance of understanding the origin of crystal habits, as can help to decipher how external influences can affect the crystal structure and its surface, leading to the dissolution of preferred surfaces and the selective release of Pb and Mo.

Synthesis and Characterisation of Hemihydrate Gypsum-Polyacrylamide Composite: A Novel Inorganic/Organic Cementitious Material.

This study combined inorganic α-hemihydrate gypsum (α-HHG) with organic polyacrylamide (PAM) hydrogel to create a novel α-HHG/PAM composite material. Through this facile composite strategy, this fabricated material exhibited a significantly longer initial setting time and higher mechanical strength compared to α-HHG. The effects of the addition amount and the concentration of PAM precursor solution on the flowability of the α-HHG/PAM composite material slurry, initial setting time, and mechanical properties of the hardened specimens were investigated. The structural characteristics of the composite material were examined using XRD, FE-SEM, and TGA. The results showed that the initial setting time of the α-HHG/PAM composite material was 25.7 min, which is an extension of 127.43% compared to that of α-HHG. The flexural strength and compressive strength of the oven-dried specimens were 23.4 MPa and 58.6 MPa, respectively, representing increases of 34.73% and 84.86% over values for α-HHG. The XRD, FE-SEM, and TGA results all indicated that the hydration of α-HHG in the composite material was incomplete. The incompleteness is caused by the competition between the hydration process of inorganic α-HHG and the gelation process of the acrylamide molecules for water, which hinders some α-HHG from entirely reacting with water. The enhanced mechanical strength of the α-HHG/PAM composite material results from the tight interweaving and integrating of organic and inorganic networks. This study provides a concise and efficient approach to the modification research of hemihydrate gypsum.

Integration of epitaxial LiNbO3thin films with silicon technology.

Development of bulk acoustic wave filters with ultra-wide pass bands and operating at high frequencies for 5thand 6thgeneration telecommunication applications and micro-scale actuators, energy harvesters and sensors requires lead-free piezoelectric thin films with high electromechanical coupling and compatible with Si technology. In this paper, the epitaxial growth of 36°Y-X and 30°X-Y LiNbO3films by direct liquid injection chemical vapour deposition on Si substrates by using epitaxial SrTiO3layers, grown by molecular beam epitaxy, has been demonstrated. The stability of the interfaces and chemical interactions between SrTiO3, LiNbO3and Si were studied experimentally and by thermodynamical calculations. The experimental conditions for pure 36°Y-X orientation growth have been optimized. The piezoelectricity of epitaxial 36°Y-X LiNbO3/SrTiO3/Si films was confirmed by means of piezoelectric force microscopy measurements and the ferroelectric domain inversion was attained at 85 kV.cm-1as expected for the nearly stoichiometric LiNbO3. According to the theoretical calculations, 36°Y-X LiNbO3films on Si could offer an electromechanical coupling of 24.4% for thickness extension excitation of bulk acoustic waves and a comparable figure of merit of actuators and vibrational energy harvesters to that of standard PbZr1-xTixO3films.

Kinetics vs. thermodynamics: walking on the line for a five-fold increase in MnSi Curie temperature.

Green and digital transitions will induce tremendous demand for metals and semiconductors. This raises concerns about the availability of materials in the rather near future. Addressing this challenge requires an unprecedented effort to discover new materials that are more sustainable and also to expand their functionalities beyond conventional material limits. From this point of view, complex systems combining semiconductor and magnetic properties in a single material lay the foundations for future nanoelectronics devices. Through a combination of out-of-stable equilibrium processes, we achieved fine control over the crystallisation of non-stoichiometric MnSix (x = 0.92). The Curie temperature shows non-monotonous evolution with crystallisation. At the earliest and final stages, the Curie temperature is comparable with stoichiometric MnSi (TC = 30 K). At the intermediate stage, while the material is crystalline and remains non-stoichiometric, a remarkable fivefold increase in Curie temperature (TC = 150 K) is observed. This finding highlights the potential for controlling the metastability of materials as a promising and relatively unexplored pathway to enhance material properties, without relying on critical materials such as rare earth elements.

Photodegradation of disposable polypropylene face masks: Physicochemical properties of debris and implications for the toxicity of mask-carried river biofilms.

COVID-19 outbreak led to a massive dissemination of protective polypropylene (PP) face masks in the environment, posing a new environmental risk amplified by mask photodegradation and fragmentation. Masks are made up of a several kilometres long-network of fibres with diameter from a few microns to around 20 µm. After photodegradation, these fibres disintegrate, producing water dispersible debris. Electrokinetics and particle stability observations support that photodegradation increases/decreases the charge/hydrophobicity of released colloidal fragments. This change in hydrophobicity is related to the production of UV-induced carbonyl and hydroxyl reactive groups detectable after a few days of exposure. Helical content, surface roughness and specific surface area of mask fibres are not significantly impacted by photodegradation. Fragmentation of fibres makes apparent, at the newly formed surfaces, otherwise-buried additives like TiO2 nanoparticles and various organic components. Mortality of gammarids is found to increase significantly over time when fed with 3 days-UV aged masks that carry biofilms grown in river, which is due to a decreased abundance of microphytes therein. In contrast, bacteria abundance and microbial community composition remain unchanged regardless of mask degradation. Overall, this work reports physicochemical properties of pristine and photodegraded masks, and ecosystemic functions and ecotoxicity of freshwater biofilms they can carry.

Electronic and Transport Properties of Strained and Unstrained Ge2Sb2Te5: A DFT Investigation.

In recent years, layered chalcogenides have attracted interest for their appealing thermoelectric properties. We investigated the Ge2Sb2Te5 compound in two different stacking sequences, named stacking 1 (S1) and stacking 2 (S2), wherein the Ge and Sb atomic positions can be interchanged in the structure. The compound unit cell, comprising nine atoms, is made of two layers separated by a gap. We show, using the quantum theory of atoms in molecules, that the bonding across the layers has characteristics of transit region bonding, though with a close resemblance to closed-shell bonding. Both S1 and S2 are shown to bear a similar small gap. The full determination of their thermoelectric properties, including the Seebeck coefficient, electrical conductivity and electronic and lattice thermal conductivities, was carried out by solving the Boltzmann transport equation. We show that stacking 1 exhibits a larger Seebeck coefficient and smaller electrical conductivity than stacking 2, which is related to their small electronic gap difference, and that S1 is more suitable for thermoelectric application than S2. Moreover, under certain conditions of temperature and doping level, it could be possible to use S1-Ge2Sb2Te5 as both a p and n leg in a thermoelectric converter. Under biaxial, tensile and compressive strains, we observe that the thermoelectric properties are improved for both S1 and S2. Furthermore, the increase in the power factor of S1 in the cross-plane direction, namely perpendicular to the gap between the layers, shows that strains can counteract the electronic transport hindrance due to the gap.

Crystal Structure and Ferromagnetism of the CeFe9Si4 Intermetallic Compound.

We have determined the crystal structure and the magnetic state of the CeFe9Si4 intermetallic compound. Our revised structural model (fully ordered tetragonal unit cell, I4/mcm) agrees with the previous literature report, except for some minor quantitative differences. Magnetically, the CeFe9Si4 undergoes a ferromagnetic transition at the temperature TC ≈ 94 K. Ferromagnetism in the combined Ce-Fe spin system is a result of interplay between the localized magnetism of the Ce sublattice and the Fe band (itinerant) magnetism. Ferromagnetic ordering obeys the rather general rule that the exchange spin coupling between atoms possessing more than half-full d shells with atoms possessing less than half-full d shells is antiferromagnetic (where the Ce atoms are considered as light d elements). Since in rare-earth metals from the light half of the lanthanide series, the magnetic moment is directed opposite to the spin, this results in ferromagnetism. The magnetoresistance and the magnetic specific heat show an additional temperature-dependent feature (a shoulder) deep inside the ferromagnetic phase that is considered to originate from the influence of the magnetization on the electronic band structure via the magnetoelastic coupling, which alters the Fe band magnetism below TC. The ferromagnetic phase of CeFe9Si4 is magnetically soft.

Lychee-like TiO2@Fe2O3 Core-Shell Nanostructures with Improved Lithium Storage Properties as Anode Materials for Lithium-Ion Batteries.

In this study, lychee-like TiO2@Fe2O3 microspheres with a core-shell structure have been prepared by coating Fe2O3 on the surface of TiO2 mesoporous microspheres using the homogeneous precipitation method. The structural and micromorphological characterization of TiO2@Fe2O3 microspheres has been carried out using XRD, FE-SEM, and Raman, and the results show that hematite Fe2O3 particles (7.05% of the total mass) are uniformly coated on the surface of anatase TiO2 microspheres, and the specific surface area of this material is 14.72 m2 g-1. The electrochemical performance test results show that after 200 cycles at 0.2 C current density, the specific capacity of TiO2@Fe2O3 anode material increases by 219.3% compared with anatase TiO2, reaching 591.5 mAh g-1; after 500 cycles at 2 C current density, the discharge specific capacity of TiO2@Fe2O3 reaches 273.1 mAh g-1, and its discharge specific capacity, cycle stability, and multiplicity performance are superior to those of commercial graphite. In comparison with anatase TiO2 and hematite Fe2O3, TiO2@Fe2O3 has higher conductivity and lithium-ion diffusion rate, thereby enhancing its rate performance. The electron density of states (DOS) of TiO2@Fe2O3 shows its metallic nature by DFT calculations, revealing the essential reason for the high electronic conductivity of TiO2@Fe2O3. This study presents a novel strategy for identifying suitable anode materials for commercial lithium-ion batteries.

Intercalation of p-Aminopyridine and p-Ethylenediamine Molecules into Orthorhombic In1.2Ga0.8S3 Single Crystals.

A single crystalline layered semiconductor In1.2Ga0.8S3 phase was grown, and by intercalating p-aminopyridine (NH2-C5H4N or p-AP) molecules into this crystal, a new intercalation compound, In1.2Ga0.8S3·0.5(NH2-C5H4N), was synthesized. Further, by substituting p-AP molecules with p-ethylenediamine (NH2-CH2-CH2-NH2 or p-EDA) in this intercalation compound, another new intercalated compound-In1.2Ga0.8S3·0.5(NH2-CH2-CH2-NH2) was synthesized. It was found that the single crystallinity of the initial In1.2Ga0.8S3 samples was retained after their intercalation despite a strong deterioration in quality. The thermal peculiarities of both the intercalation and deintercalation of the title crystal were determined. Furthermore, the unit cell parameters of the intercalation compounds were determined from X-ray diffraction data (XRD). It was found that increasing the c parameter corresponded to the dimension of the intercalated molecule. In addition to the intercalation phases' experimental characterization, the lattice dynamical properties and the electronic and bonding features of the stoichiometric GaInS3 were calculated using the Density Functional Theory within the Generalized Gradient Approximations (DFT-GGA). Nine Raman-active modes were observed and identified for this compound. The electronic gap was found to be an indirect one and the topological analysis of the electron density revealed that the interlayer bonding is rather weak, thus enabling the intercalation of organic molecules.

Probing spin fluctuations of the quantum phase transition in Ce3Al by muon spin rotation.

We report on the dynamics of a magnetic-field-driven antiferromagnetic-to-paramagnetic quantum phase transition in monocrystalline Ce3Al via transverse-field muon spin rotation (TF-µSR) experiments down to low temperature of [Formula: see text] 80 mK. The quantum phase transition is of a spin-flip type and takes place on the Ce-Al magnetic chains as a result of competition between the indirect exchange and the Zeeman interaction of the Ce moments with the external field, applied along the chain direction (also the direction of the antiferromagnetic axis). The Ce moments are not static at [Formula: see text] 0, but fluctuate in their direction due to the Heisenberg uncertainty principle. Upon applying the magnetic field sweep, the fluctuations exhibit the largest amplitude at the quantum critical point, manifested in a maximum of the muon transverse relaxation rate at the critical field. The quantum nature of fluctuations observed in the TF-µSR experiments is reflected in the temperature independence of the average local magnetic field component along the external magnetic field at the muon stopping site(s) and the muon transverse relaxation rate within the investigated temperature range 1.5 K-80 mK. Quantum fluctuations are fast on the muon Larmor frequency scale, [Formula: see text] 10-10 s.

Insights into Solid-To-Solid Transformation of MOF Amorphous Phases.

Metal-organic frameworks (MOFs) have been recently explored as crystalline solids for conversion into amorphous phases demonstrating non-specific mechanical, catalytic, and optical properties. The real-time control of such structural transformations and their outcomes still remain a challenge. Here, we use in situ high-resolution transmission electron microscopy with 0.01 s time resolution to explore non-thermal (electron induced) amorphization of a MOF single crystal, followed by transformation into an amorphous nanomaterial. By comparing a series of M-BTC (M: Fe3+, Co3+, Co2+, Ni2+, and Cu2+; BTC: 1,3,5-benzentricarboxylic acid), we demonstrate that the topology of a metal cluster of the parent MOFs determines the rate of formation and the chemistry of the resulting phases containing an intact ligand and metal or metal oxide nanoparticles. Confocal Raman and photoluminescence spectroscopies further confirm the integrity of the BTC ligand and coordination bond breaking, while high-resolution imaging with chemical and structural analysis over time allows for tracking the dynamics of solid-to-solid transformations. The revealed relationship between the initial and resulting structures and the stability of the obtained phase and its photoluminescence over time contribute to the design of new amorphous MOF-based optical nanomaterials.

Al4Ir: An Al-Ir Binary-Phase Superstructure of the Ni2Al3 Type.

A binary phase with Al4Ir composition has been discovered in the Al-Ir binary system. Single-crystal X-ray diffraction analysis reveals that it crystallizes in the trigonal space group P3c1 with the unit cell parameters a = 12.8802(2) Å and c = 9.8130(2) Å. This structure is derived from the Ni2Al3 structure type. The supercell is due to the ordering of the aluminum atoms, which replace the nickel atoms in the prototype structure. The crystal structure was directly imaged by atomic-scale scanning transmission electron microscopy, and the misalignment of the Al site responsible for the supercell has been clearly evidenced. Its metastable nature has been confirmed by differential thermal analysis measurements. The atomic and electronic structures of Al4Ir have also been investigated by density functional theory. The structural optimization leads to lattice parameters and atomic positions in good agreement with the experimental ones. The compound is metallic, with a minimum in the density of states located more than 1 eV above the Fermi energy. This suggests a metastable system, in agreement with the electron count found much above 18 electrons per Ir atom, deviating from the Hume-Rothery rule and with the presence of occupied antibonding states revealed by the crystal orbital Hamiltonian population analysis. The relative stability of the compound is ensured by the hybridization between sp-Al and d-Ir states within Ir-centered clusters, while covalent-like interactions in-between the clusters are indicated by the analysis of the electron localizability function.

Preparation and Chromaticity Control of CoTiO3/NiTiO3 Co-Coated TiO2 Composite Pigments.

In this study, home-made amorphous TiO2 microspheres with good mono-dispersity and large numbers of mesopores on the surface were used as substrates. The intermediate microspheres were obtained by adding Co/Ni sources with different Co/Ni molar ratios in a water bath and making them react by water bath heating. By calcining the intermediate microspheres deposited on the TiO2 ones, a core-shell structured spherical CoTiO3/NiTiO3 inorganic composite pigment was prepared. The synthesized pigments were characterized by X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), laser particle size (LPS) analysis and colorimetry. The results show that when the calcination temperature is 800 °C and the Co/Ni molar ratio is 0.5:0.5, the pigments consist of a TiO2 core and outer ilmenite CoTiO3/NiTiO3 shell. Moreover, the surface of the product microspheres is smooth, and the particles are of regular sphericity with a uniform particle size of about 1.8 µm. The colorimetric analysis from the samples calcined at 800 °C shows color changes from yellow-green to dark green as the Co/Ni molar ratio increases (0.1:0.9 to 0.9:0.1). A Co/Ni molar ratio that is too high or too low results in the formation of by-products such as Co3O4 or NiO, respectively, which adhere to the product surface and affect the chromaticity of the product. This work has enabled the chromatic modulation of yellow-green inorganic pigments, providing a solution for the preparation of spherical inorganic pigments that are more suitable for industrial inkjet printing.

Investigation of PbSnTeSe High-Entropy Thermoelectric Alloy: A DFT Approach.

Thermoelectric materials have attracted extensive attention because they can directly convert waste heat into electric energy. As a brand-new method of alloying, high-entropy alloys (HEAs) have attracted much attention in the fields of materials science and engineering. Recent researches have found that HEAs could be potentially good thermoelectric (TE) materials. In this study, special quasi-random structures (SQS) of PbSnTeSe high-entropy alloys consisting of 64 atoms have been generated. The thermoelectric transport properties of the highest-entropy PbSnTeSe-optimized structure were investigated by combining calculations from first-principles density-functional theory and on-the-fly machine learning with the semiclassical Boltzmann transport theory and Green-Kubo theory. The results demonstrate that PbSnTeSe HEA has a very low lattice thermal conductivity. The electrical conductivity, thermal electronic conductivity and Seebeck coefficient have been evaluated for both n-type and p-type doping. N-type PbSnTeSe exhibits better power factor (PF = S2σ) than p-type PbSnTeSe because of larger electrical conductivity for n-type doping. Despite high electrical thermal conductivities, the calculated ZT are satisfactory. The maximum ZT (about 1.1) is found at 500 K for n-type doping. These results confirm that PbSnTeSe HEA is a promising thermoelectric material.

Structural and Electrochemical Properties of Li2O-V2O5-B2O3-Bi2O3 Glass and Glass-Ceramic Cathodes for Lithium-Ion Batteries.

In this study, 20Li2O-60V2O5-(20 - x)B2O3-xBi2O3 (x = 5, 7.5, 10 mol%) glass materials have been prepared by the melt-quenching method, and the structure and morphology of the glass materials have been characterized by XRD, FTIR, Raman, and FE-SEM. The results show that the disordered network of the glass is mainly composed of structural motifs, such as VO4, BO3, BiO3, and BiO6. The electrochemical properties of the glass cathode material have been investigated by the galvanostatic charge-discharge method and cyclic voltammetry, and the results show that with the increases of Bi2O3 molar content, the amount of the VO4 group increases, and the network structure of the glass becomes more stable. To further enhance the electrochemical properties, glass-ceramic materials have been obtained by heat treatment, and the effect of the heat treatment temperature on the structure and electrochemical properties of the glass has been studied. The results show that the initial discharge capacity of the glass-ceramic cathode obtained by heat treatment at 280 °C at a current density of 50 mA·g-1 is 333.4 mAh·g-1. In addition, after several cycles of charging and discharging at a high current density of 1000 mA·g-1 and then 10 cycles at 50 mA·g-1, its discharge capacity remains at approximately 300 mAh·g-1 with a capacity retention rate of approximately 90.0%. The results indicate that a proper heat treatment temperature is crucial to improving the electrochemical properties of glass materials. This study provides an approach for the development of new glass cathode materials for lithium-ion batteries.

First-Principle Investigations on the Electronic and Transport Properties of PbBi2Te2X2 (X = S/Se/Te) Monolayers.

This paper reports first-principles calculations on PbBi2Te2S2, PbBi2Te2Se2 and PbBi2Te4 monolayers. The strain effects on their electronic and thermoelectric properties as well as on their stability have been investigated. Without strain, the PbBi2Te4 monolayer exhibits highest Seebeck coefficient with a maximum value of 671 µV/K. Under tensile strain the highest power factor are 12.38×1011 Wm-1K-2s-1, 10.74×1011 Wm-1K-2s-1 and 6.51×1011 Wm-1K-2s-1 for PbBi2Te2S2, PbBi2Te2Se2 and PbBi2Te4 at 3%, 2% and 1% tensile strains, respectively. These values are 85.9%, 55.0% and 3.3% larger than those of the unstrained structures.

Structure-Property Relationships in Transition Metal Dichalcogenide Bilayers under Biaxial Strains.

This paper reports a Density Functional Theory (DFT) investigation of the electron density and optoelectronic properties of two-dimensional (2D) MX2 (M = Mo, W and X = S, Se, Te) subjected to biaxial strains. Upon strains ranging from -4% (compressive strain) to +4% (tensile strain), MX2 bilayers keep the same bandgap type but undergo a non-symmetrical evolution of bandgap energies and corresponding effective masses of charge carriers (m*). Despite a consistency regarding the electronic properties of Mo- and WX2 for a given X, the strain-induced bandgap shrinkage and m* lowering are strong enough to alter the strain-free sequence MTe2, MSe2, MS2, thus tailoring the photovoltaic properties, which are found to be direction dependent. Based on the quantum theory of atoms in molecules, the bond degree (BD) at the bond critical points was determined. Under strain, the X-X BD decreases linearly as X atomic number increases. However, the kinetic energy per electron G/ρ at the bond critical point is independent of strains with the lowest values for X = Te, which can be related to the highest polarizability evidenced from the dielectric properties. A cubic relationship between the absolute BD summation of M-X and X-X bonds and the static relative permittivity was observed. The dominant position of X-X bond participating in this cubic relationship in the absence of strain was substantially reinforced in the presence of strain, yielding the leading role of the X-X bond instead of the M-X one in the photovoltaic response of 2D MX2 material.

Strain Effects on the Electronic and Thermoelectric Properties of n(PbTe)-m(Bi2Te3) System Compounds.

Owing to their low lattice thermal conductivity, many compounds of the n(PbTe)-m(Bi2Te3) homologous series have been reported in the literature with thermoelectric (TE) properties that still need improvement. For this purpose, in this work, we have implemented the band engineering approach by applying biaxial tensile and compressive strains using the density functional theory (DFT) on various compounds of this series, namely Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5. All the fully relaxed Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5 compounds are narrow band-gap semiconductors. When applying strains, a semiconductor-to-metal transition occurs for all the compounds. Within the range of open-gap, the electrical conductivity decreases as the compressive strain increases. We also found that compressive strains cause larger Seebeck coefficients than tensile ones, with the maximum Seebeck coefficient being located at -2%, -6%, -3% and 0% strain for p-type Bi2Te3, PbBi2Te4, PbBi4Te7 and Pb2Bi2Te5, respectively. The use of the quantum theory of atoms in molecules (QTAIM) as a complementary tool has shown that the van der Waals interactions located between the structure slabs evolve with strains as well as the topological properties of Bi2Te3 and PbBi2Te4. This study shows that the TE performance of the n(PbTe)-m(Bi2Te3) compounds is modified under strains.