The influence of frequency and gravity on the orientation of active metallo-dielectric Janus particles translating under a uniform applied alternating-current electric field.

Theoretical and numerical models of active Janus particles commonly assume that the metallo-dielectric interface is parallel to the driving applied electric field. However, our experimental observations indicate that the equilibrium angle of orientation of electrokinetically driven Janus particles varies as a function of the frequency and voltage of the applied electric field. Here, we quantify the variation of the orientation with respect to the electric field and demonstrate that the equilibrium position represents the interplay between gravitational, electrostatic and electrohydrodynamic torques. The latter two categories are functions of the applied field (frequency, voltage) as well as the height of the particle above the substrate. Maximum departure from the alignment with the electric field occurs at low frequencies characteristic of induced-charge electrophoresis and at low voltages where gravity dominates the electrostatic and electrohydrodynamic torques. The departure of the interface from alignment with the electric field is shown to decrease particle mobility through comparison of freely suspended Janus particles subject only to electrical forcing and magnetized Janus particles in which magnetic torque is used to align the interface with the electric field. Consideration of the role of gravitational torque and particle-wall interactions could account for some discrepancies between theory, numerics and experiment in active matter systems.

Active microfluidic reactor-assisted controlled synthesis of nanoparticles and related potential biomedical applications.

Fabricating high-performance nanoparticles (NPs) is currently a focus of researchers due to their manipulative size-dependent unique properties required to develop next-generation advanced systems. To harness the unique properties of NPs, maintaining identical characteristics throughout the processing and application process system is crucial to producing uniform-sized, or monodisperse, NPs. In this direction, mono-dispersity can be achieved by exerting extreme control over the reaction conditions during the NP synthesis process. Microfluidic technology offers a unique approach to control fluid conditions at the microscale and is thus well-positioned as an alternative strategy to synthesize NPs in reactors demonstrating micrometric dimensions and advanced size-controlled nanomaterial production. These microfluidic reactors can be broadly classified as active or passive based on their dependence on external energy sources. Passive microfluidic reactors, despite their lack of reliance on external energy, are frequently constrained in terms of their mixing efficacy when compared to active systems. However, despite several fundamental and technological advantages, this area of research as well as its application to the biological sciences is not well-discussed. To fill this gap, this review for the first time discusses various strategies for synthesizing NPs using active microfluidic reactors including acoustic, pressure, temperature, and magnetic assisted microfluidic reactors. Various established ways for achieving size control on NP synthesis in microfluidic reactors representing the applicability of micro-reaction technology in developing novel nanomaterials suitable for potential biomedical applications are presented in this review along with a comprehensive discussion about the challenges and prospects.

The impact of selected abiotic factors on Artemia hatching process through real-time observation of oxygen changes in a microfluidic platform.

Current studies on abiotic impacts on Artemia, a crustacean which is widely used in aquaculture, and ecotoxicology, often focus on endpoint analysis (e.g., hatching rates, survival). Here, we demonstrate that a mechanistic understanding can be obtained through measurement of oxygen consumption in real-time over an extended time period in a microfluidic platform. The platform enables high level control of the microenvironment and direct observation of morphological changes. As a demonstration, temperature and salinity are chosen to represent critical abiotic parameters that are also threatened by climate change. The hatching process of Artemia consists of four different stages: hydration, differentiation, emergence, and hatching. Different temperatures (20, 35, and 30 °C) and salinities (0, 25, 50, and 75 ppt) are shown to significantly alter the duration of hatching stages, metabolic rates, and hatchability. Specifically, the metabolic resumption of dormant Artemia cysts was significantly enhanced at higher temperatures and moderate salinity, however, the time needed for this resumption was only dependent on higher temperatures. Hatchability was inversely related to the duration of the differentiation stage of hatching, which persisted longer at lower temperatures and salinities. The current approach of investigation of metabolism and corresponding physical changes can be employed to study hatching processes of other aquatic species, even those with low metabolic rate.

Analysis of Cargo Loading Modes and Capacity of an Electrically-Powered Active Carrier.

The use of active colloids for cargo transport offers unique potential for applications ranging from targeted drug delivery to lab-on-a-chip systems. Previously, Janus particles (JPs), acting as mobile microelectrodes, have been shown to transport cargo which is trapped at the JP surface by a dielectrophoretic mechanism. Herein, we aim to characterize the cargo loading properties of mobile Janus carriers, across a broad range of frequencies and voltages. In expanding the frequency range of the carrier, we are able to compare the influences of different modes of carrier transport on the loading capacity as well as highlight the differences between cargo trapped by positive and negative dielectrophoresis. Specifically, it is shown that cargo trapping results in a reduction in carrier velocities with this effect more pronounced at low frequencies where cargo is trapped close to the substrate. Interestingly, we observe the existence of a maximum cargo loading capacity which decreases at large voltages suggesting a strong interplay between trapping and hydrodynamic shear. Finally, we demonstrate that the control of the frequency can enable different assemblies of binary colloidal solutions on the JP. The resultant findings enable the optimization of electrokinetic cargo transport and its selective application to a broad range of targets.

Active colloids as mobile microelectrodes for unified label-free selective cargo transport.

Utilization of active colloids to transport both biological and inorganic cargo has been widely examined in the context of applications ranging from targeted drug delivery to sample analysis. In general, carriers are customized to load one specific target via a mechanism distinct from that driving the transport. Here we unify these tasks and extend loading capabilities to include on-demand selection of multiple nano/micro-sized targets without the need for pre-labelling or surface functionalization. An externally applied electric field is singularly used to drive the active cargo carrier and transform it into a mobile floating electrode that can attract (trap) or repel specific targets from its surface by dielectrophoresis, enabling dynamic control of target selection, loading and rate of transport via the electric field parameters. In the future, dynamic selectivity could be combined with directed motion to develop building blocks for bottom-up fabrication in applications such as additive manufacturing and soft robotics.

Propulsion of Active Colloids by Self-Induced Field Gradients.

Previously, metallodielectric Janus particles have been shown to travel with their dielectric hemisphere forward under low frequency applied electric fields as a result of asymmetric induced-charge electroosmotic flow. Here, it is demonstrated that at high frequencies, well beyond the charge relaxation time of the electric double layer induced around the particle, rather than the velocity decaying to zero, the Janus particles reverse direction, traveling with their metallic hemisphere forward. It is proposed that such motion is the result of a surface force, arising from localized nonuniform electric field gradients, induced by the dual symmetry-breaking of an asymmetric particle adjacent to a wall, which act on the induced dipole of the particle to drive net motion even in a uniform AC field. Although the field is external, since the driving gradient is induced on the particle level, it may be considered an active colloid. We have thus termed this propulsion mechanism "self-dielectrophoresis", to distinguish from traditional dielectrophoresis where the driving nonuniform field is externally fixed and the particle direction is restricted. It is demonstrated theoretically and experimentally that the critical frequency at which the particle reverses direction can be characterized by a nondimensional parameter which is a function of electrolyte concentration and particle size.

Observing Electrokinetic Janus Particle-Channel Wall Interaction Using Microparticle Image Velocimetry.

Three-dimensional/two-component microparticle image velocimetry is used to examine the hydrodynamic flow patterns around metallodielectric Janus particles 15 µm in diameter adjacent to insulating and conducting walls. Far from the walls, the observed flow patterns are in good qualitative agreement with previous experimental and analytical models. However, close to the conducting wall, strong electrohydrodynamic flows are observed at low frequencies, which result in fluid being injected toward the particle. The proximity of the metallic hemisphere to the conducting wall is also shown to produce a localized field gradient, which results in dielectrophoretic trapping of 300 nm polystyrene particles across a broad range of frequencies.

The influence of flow intensity and field frequency on continuous-flow dielectrophoretic trapping.

We examine the combined influence of the intensity of pressure driven background flow and the frequency of the applied field on the continuous-flow dielectrophoretic trapping behavior of micro-particles within a micro-channel. Using an embedded interdigitated electrode array, we find that the measured trapping percentage over a continuous frequency range exhibits several curious effects which are strongly dependent on the flow intensity, including an apparent shift of the cross-over frequency and low-frequency dispersion. A numerical and theoretical model accounting for the combined effects of pressure-driven flow, dielectrophoresis and alternating-current electro-osmosis on the equation of motion for the particle is used to qualitatively describe the main experimental results.

Spinning Janus doublets driven in uniform ac electric fields.

We provide an experimental proof of concept for a robust, continuously rotating microstructure-consisting of two metallodielectric (gold-polystyrene) Janus particles rigidly attached to each other-which is driven in uniform ac fields by asymmetric induced-charge electro-osmosis. The pairs (doublets) are stabilized on the substrate surface which is parallel to the plane of view and normal to the direction of the applied electric field. We find that the radius of orbit and angular velocity of the pair are predominantly dependent on the relative orientations of the interfaces between the metallic and dielectric hemispheres and that the electrohydrodynamic particle-particle interactions are small. Additionally, we verify that both the angular and linear velocities of the pair are proportional to the square of the applied field which is consistent with the theory for nonlinear electrokinetics. A simple kinematic rigid body model is used to predict the paths and doublet velocities (angular and linear) based on their relative orientations with good agreement.

Induced-charge electrophoresis of uncharged dielectric spherical Janus particles.

We derive the equations governing the dipolophoretic motion of an electrically inhomogeneous Janus particle composed of two hemispheres with differing permittivities. The general formulation is valid for any electric forcing, including alternating current (AC) and makes no assumptions regarding the size of the electric double layer (EDL). The solution is thus valid even for nanoparticles where the particle radius can be of the same order as the EDL thickness. Semi-analytic and numerical solutions for the linear phoretic velocity and angular rotation of a single Janus particle suspended in an infinite medium are given in the limit of uniform direct current (DC) electric forcing. It is determined that particle mobility is a function of the permittivity in each hemisphere and the contrast between them as well as the EDL length. For a particle in which both hemispheres are characterized by a finite permittivity, we discover that maximum mobility and rotation is not obtained in the Helmholtz-Smoluchowski thin EDL limit but is rather a function of the permittivity and EDL properties.