Biodegradable nanoparticles induce cGAS/STING-dependent reprogramming of myeloid cells to promote tumor immunotherapy.

Cancer treatment utilizing infusion therapies to enhance the patient's own immune response against the tumor have shown significant functionality in a small subpopulation of patients. Additionally, advances have been made in the utilization of nanotechnology for the treatment of disease. We have previously reported the potent effects of 3-4 daily intravenous infusions of immune modifying poly(lactic-co-glycolic acid) (PLGA) nanoparticles (IMPs; named ONP-302) for the amelioration of acute inflammatory diseases by targeting myeloid cells. The present studies describe a novel use for ONP-302, employing an altered dosing scheme to reprogram myeloid cells resulting in significant enhancement of tumor immunity. ONP-302 infusion decreased tumor growth via the activation of the cGAS/STING pathway within myeloid cells, and subsequently increased NK cell activation via an IL-15-dependent mechanism. Additionally, ONP-302 treatment increased PD-1/PD-L1 expression in the tumor microenvironment, thereby allowing for functionality of anti-PD-1 for treatment in the B16.F10 melanoma tumor model which is normally unresponsive to monotherapy with anti-PD-1. These findings indicate that ONP-302 allows for tumor control via reprogramming myeloid cells via activation of the STING/IL-15/NK cell mechanism, as well as increasing anti-PD-1 response rates.

Tolerogenic Immune-Modifying Nanoparticles Encapsulating Multiple Recombinant Pancreatic ß Cell Proteins Prevent Onset and Progression of Type 1 Diabetes in Nonobese Diabetic Mice.

Type 1 diabetes (T1D) is an autoimmune disease characterized by T and B cell responses to proteins expressed by insulin-producing pancreatic ß cells, inflammatory lesions within islets (insulitis), and ß cell loss. We previously showed that Ag-specific tolerance targeting single ß cell protein epitopes is effective in preventing T1D induced by transfer of monospecific diabetogenic CD4 and CD8 transgenic T cells to NOD.scid mice. However, tolerance induction to individual diabetogenic proteins, for example, GAD65 (glutamic acid decarboxylase 65) or insulin, has failed to ameliorate T1D both in wild-type NOD mice and in the clinic. Initiation and progression of T1D is likely due to activation of T cells specific for multiple diabetogenic epitopes. To test this hypothesis, recombinant insulin, GAD65, and chromogranin A proteins were encapsulated within poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles (COUR CNPs) to assess regulatory T cell induction, inhibition of Ag-specific T cell responses, and blockade of T1D induction/progression in NOD mice. Whereas treatment of NOD mice with CNPs containing a single protein inhibited the corresponding Ag-specific T cell response, inhibition of overt T1D development only occurred when all three diabetogenic proteins were included within the CNPs (CNP-T1D). Blockade of T1D following CNP-T1D tolerization was characterized by regulatory T cell induction and a significant decrease in both peri-insulitis and immune cell infiltration into pancreatic islets. As we have recently published that CNP treatment is both safe and induced Ag-specific tolerance in a phase 1/2a celiac disease clinical trial, Ag-specific tolerance induced by nanoparticles encapsulating multiple diabetogenic proteins is a promising approach to T1D treatment.

Nanoparticles reduce monocytes within the lungs to improve outcomes after influenza virus infection in aged mice.

Older people exhibit dysregulated innate immunity to respiratory viral infections, including influenza and SARS-CoV-2, and show an increase in morbidity and mortality. Nanoparticles are a potential practical therapeutic that could reduce exaggerated innate immune responses within the lungs during viral infection. However, such therapeutics have not been examined for effectiveness during respiratory viral infection, particular in aged hosts. Here, we employed a lethal model of influenza viral infection in vulnerable aged mice to examine the ability of biodegradable, cargo-free nanoparticles, designated ONP-302, to resolve innate immune dysfunction and improve outcomes during infection. We administered ONP-302 via i.v. injection to aged mice at day 3 after infection, when the hyperinflammatory innate immune response was already established. During infection, we found that ONP-302 treatment reduced the numbers of inflammatory monocytes within the lungs and increased their number in both the liver and spleen, without impacting viral clearance. Importantly, cargo-free nanoparticles reduced lung damage, reduced histological lung inflammation, and improved gas exchange and, ultimately, the clinical outcomes in influenza-infected aged mice. In conclusion, ONP-302 improves outcomes in influenza-infected aged mice. Thus, our study provides information concerning a practical therapeutic, which, if translated clinically, could improve disease outcomes for vulnerable older patients suffering from respiratory viral infections.

ONP-302 Nanoparticles Inhibit Tumor Growth By Altering Tumor-Associated Macrophages And Cancer-Associated Fibroblasts.

In this study, we evaluated the ability of negatively charged bio-degradable nanoparticles, ONP- 302, to inhibit tumor growth. Therapeutic treatment with ONP-302 in vivo resulted in a marked delay in tumor growth in three different syngeneic tumor models in immunocompetent mice. ONP- 302 efficacy persisted with depletion of CD8+ T cells in immunocompetent mice and also was effective in immune deficient mice. Examination of ONP-302 effects on components of the tumor microenvironment (TME) were explored. ONP-302 treatment caused a gene expression shift in TAMs toward the pro-inflammatory M1 type and substantially inhibited the expression of genes associated with the pro-tumorigenic function of CAFs. ONP-302 also induced apoptosis in CAFs in the TME. Together, these data support further development of ONP-302 as a novel first-in- class anti-cancer therapeutic that can be used as a single-agent as well as in combination therapies for the treatment of solid tumors due to its ability to modulate the TME.

Exploring the linkage between cell culture process parameters and downstream processing utilizing a plackett-burman design for a model monoclonal antibody.

Linkage of upstream cell culture with downstream processing and purification is an aspect of Quality by Design crucial for efficient and consistent production of high quality biopharmaceutical proteins. In a previous Plackett-Burman screening study of parallel bioreactor cultures we evaluated main effects of 11 process variables, such as agitation, sparge rate, feeding regimens, dissolved oxygen set point, inoculation density, supplement addition, temperature, and pH shifts. In this follow-up study, we observed linkages between cell culture process parameters and downstream capture chromatography performance and subsequent antibody attributes. In depth analysis of the capture chromatography purification of harvested cell culture fluid yielded significant effects of upstream process parameters on host cell protein abundance and behavior. A variety of methods were used to characterize the antibody both after purification and buffer formulation. This analysis provided insight in to the significant impacts of upstream process parameters on aggregate formation, impurities, and protein structure. This report highlights the utility of linkage studies in identifying how changes in upstream parameters can impact downstream critical quality attributes. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:163-170, 2017.

Improved Stability of a Model IgG3 by DoE-Based Evaluation of Buffer Formulations.

Formulating appropriate storage conditions for biopharmaceutical proteins is essential for ensuring their stability and thereby their purity, potency, and safety over their shelf-life. Using a model murine IgG3 produced in a bioreactor system, multiple formulation compositions were systematically explored in a DoE design to optimize the stability of a challenging antibody formulation worst case. The stability of the antibody in each buffer formulation was assessed by UV/VIS absorbance at 280 nm and 410 nm and size exclusion high performance liquid chromatography (SEC) to determine overall solubility, opalescence, and aggregate formation, respectively. Upon preliminary testing, acetate was eliminated as a potential storage buffer due to significant visible precipitate formation. An additional 2(4) full factorial DoE was performed that combined the stabilizing effect of arginine with the buffering capacity of histidine. From this final DoE, an optimized formulation of 200 mM arginine, 50 mM histidine, and 100 mM NaCl at a pH of 6.5 was identified to substantially improve stability under long-term storage conditions and after multiple freeze/thaw cycles. Thus, our data highlights the power of DoE based formulation screening approaches even for challenging monoclonal antibody molecules.

The Effect of Oseltamivir on the Disease Progression of Lethal Influenza A Virus Infection: Plasma Cytokine and miRNA Responses in a Mouse Model.

Lethal influenza A virus infection leads to acute lung injury and possibly lethal complications. There has been a continuous effort to identify the possible predictors of disease severity. Unlike earlier studies, where biomarkers were analyzed on certain time points or days after infection, in this study biomarkers were evaluated over the entire course of infection. Circulating proinflammatory cytokines and/or miRNAs that track with the onset and progression of lethal A/Puerto Rico/8/34 (PR8) influenza A virus infection and their response to oseltamivir treatment were investigated up to 10 days after infection. Changes in plasma cytokines (IL-1ß, IL-10, IL-12p70, IL-6, KC, TNF-α, and IFN-γ) and several candidate miRNAs were profiled. Among the cytokines analyzed, IL-6 and KC/GRO cytokines appeared to correlate with peak viral titer. Over the selected 48 miRNAs profiled, certain miRNAs were up- or downregulated in a manner that was dependent on the oseltamivir treatment and disease severity. Our findings suggest that IL-6 and KC/GRO cytokines can be a potential disease severity biomarker and/or marker for the progression/remission of infection. Further studies to explore other cytokines, miRNAs, and lung injury proteins in serum with different subtypes of influenza A viruses with varying disease severity may provide new insight into other unique biomarkers.

Modern analytics for synthetically derived complex drug substances: NMR, AFFF-MALS, and MS tests for glatiramer acetate.

Glatiramer acetate (GA) is a mixture of synthetic copolymers consisting of four amino acids (glutamic acid, lysine, alanine, and tyrosine) with a labeled molecular weight range of 5000 to 9000 Da. GA is marketed as Copaxone™ by Teva for the treatment of multiple sclerosis. Here, the agency has evaluated the structure and composition of GA and a commercially available comparator, Copolymer-1. Modern analytical technologies which can characterize these complex mixtures are desirable for analysis of their comparability and structural "sameness." In the studies herein, a molecular fingerprinting approach is taken using mass-accurate mass spectrometry (MS) analysis, nuclear magnetic resonance (NMR) (1D-(1)H-NMR, 1D-(13)C-NMR, and 2D NMR), and asymmetric field flow fractionation (AFFF) coupled with multi-angle light scattering (MALS) for an in-depth characterization of three lots of the marketplace drug and a formulated sample of the comparator. Statistical analyses were applied to the MS and AFFF-MALS data to assess these methods' ability to detect analytical differences in the mixtures. The combination of multiple orthogonal measurements by liquid chromatography coupled with MS (LC-MS), AFFF-MALS, and NMR on the same sample set was found to be fit for the intended purpose of distinguishing analytical differences between these complex mixtures of peptide chains.

Marketplace Analysis of Conjugated Estrogens: Determining the Consistently Present Steroidal Content with LC-MS.

Conjugated estrogens purified from pregnant mares urine has been used as estrogen hormone replacement therapy since 1942. Previously, methods were proposed to identify and quantify the components of this complex mixture but ultimately were withdrawn due to incomplete characterization of the product and difficulties in transferring the method between laboratories. The aim of the current study is to develop a LC method that can reliably detect multiple steroidal components in conjugated estrogen tablets and measure their relative amount. The method developed was optimized for UHPLC columns, and the elution profile was analyzed using high-resolution mass spectrometry. A total of 60 steroidal components were identified using their exact m/z, product ion spectra of known, and predicted conjugated estrogen structures. These components were consistently present in 23 lots of Premarin tablets spanning two production years. The ten conjugated estrogens identified in the USP monograph and other additional estrogens reported elsewhere are among the 60 steroidal components reported here. The LC-MS method was tested in different laboratories using multiple samples, and the obtained results were reproducible among laboratories.

Performance metrics for evaluating system suitability in liquid chromatography--Mass spectrometry peptide mass mapping of protein therapeutics and monoclonal antibodies.

The use of liquid chromatography--mass spectrometry (LC-MS) for the characterization of proteins can provide a plethora of information related to their structure, including amino acid sequence determination and analysis of posttranslational modifications. The variety of LC-MS based applications has led to the use of LC-MS characterization of therapeutic proteins and monoclonal antibodies as an integral part of the regulatory approval process. However, the improper use of an LC-MS system, related to intrinsic instrument limitations, improper tuning parameters, or poorly optimized methods may result in the production of low quality data. Improper system performance may arise from subtle changes in operating conditions that limit the ability to detect low abundance species. To address this issue, we systematically evaluated LC-MS/MS operating parameters to identify a set of metrics that can be used in a workflow to determine if a system is suitable for its intended purpose. Development of this workflow utilized a bovine serum albumin (BSA) digest standard spiked with synthetic peptides present at 0.1% to 100% of the BSA digest peptide concentration to simulate the detection of low abundance species using a traditional bottom-up workflow and data-dependent MS(2) acquisition. BSA sequence coverage, a commonly used indicator for instrument performance did not effectively identify settings that led to limited dynamic range or poorer absolute mass accuracy on 2 separate LC-MS systems. Additional metrics focusing on the detection limit and sensitivity for peptide identification were determined to be necessary to establish system suitability for protein therapeutic characterization by LC-MS.

Primary Sequence Confirmation of a Protein Therapeutic Using Top Down MS/MS and MS(3).

Mass spectrometry has gained widespread acceptance for the characterization of protein therapeutics as a part of the regulatory approval process. Improvements in mass spectrometer sensitivity, resolution, and mass accuracy have enabled more detailed and confident analysis of larger biomolecules for confirming amino acid sequences, assessing sequence variants, and characterizing post translational modifications. This work demonstrates the suitability of a combined approach using intact MS and multistage top down MS/MS analyses for the characterization of a protein therapeutic drug. The protein therapeutic granulocyte-colony stimulating factor was analyzed using a Thermo Fusion Tribrid mass spectrometer using a multistage top down MS approach. Intact mass analysis identified the presence of two disulfide bonds based on exact mass shifts while a combined collision induced dissociation (CID), higher-energy collisional dissociation (HCD), and electron transfer dissociation (ETD) MS/MS approach obtained 80% protein sequence coverage. Isolating MS/MS fragments for MS(3) analysis using HCD or CID increased the sequence coverage to 89%. 95% sequence coverage was obtained by reducing human granulocyte-colony stimulating factor (G-CSF) prior to MS/MS and MS(3) analysis to specifically target the residues between the disulfide bonds. The use of this combined intact MS and multistage top down MS approach allows for rapid and accurate determination of the primary sequence of a protein therapeutic drug product.

Comparison of Traditional 2-AB Fluorescence LC-MS/MS and Automated LC-MS for the Comparative Glycan Analysis of Monoclonal Antibodies.

Monoclonal antibody therapeutics are a heterogeneous mixture of glycoforms. Multiple methods exist for defining the glycan composition and relative abundance of species present. In the current report, two MS-based methods were compared for their ability to both identify glycans and monitor differences in the glycoprofile. Gross changes in the glycoprofile can be identified either by visual inspection of fluorescence profiles and correlated to glycan identities when coupled with online MS/MS (LC-F-MS/MS) or through extracted ion chromatograms using LC-MS. In the present study, both an LC-F-MS/MS method and an automated LC-MS label free approach were able to identify minor differences in low abundance glycoforms, and data indicate a disparity in glycosylation between the analyzed batches of US and foreign-sourced mAb X. Thus, either method may be useful in characterizing monoclonal antibody therapeutics products and could serve as a potential screening test for understanding process, comparability, similarity, and possibly detecting counterfeit agents.

Bioreactor process parameter screening utilizing a Plackett-Burman design for a model monoclonal antibody.

Consistent high-quality antibody yield is a key goal for cell culture bioprocessing. This endpoint is typically achieved in commercial settings through product and process engineering of bioreactor parameters during development. When the process is complex and not optimized, small changes in composition and control may yield a finished product of less desirable quality. Therefore, changes proposed to currently validated processes usually require justification and are reported to the US FDA for approval. Recently, design-of-experiments-based approaches have been explored to rapidly and efficiently achieve this goal of optimized yield with a better understanding of product and process variables that affect a product's critical quality attributes. Here, we present a laboratory-scale model culture where we apply a Plackett-Burman screening design to parallel cultures to study the main effects of 11 process variables. This exercise allowed us to determine the relative importance of these variables and identify the most important factors to be further optimized in order to control both desirable and undesirable glycan profiles. We found engineering changes relating to culture temperature and nonessential amino acid supplementation significantly impacted glycan profiles associated with fucosylation, ß-galactosylation, and sialylation. All of these are important for monoclonal antibody product quality.

Liquid Chromatography-High Resolution Mass Spectrometry for Peptide Drug Quality Control.

A liquid chromatography-high resolution mass spectrometry (LC-HRMS) method was developed using three peptide drugs: salmon calcitonin, bivalirudin, and exenatide as model systems to assess the suitability of this approach for monitoring peptide drug product quality. Calcitonin and its related impurities displayed linear responses over the range from 0.1 to 10 µM (R (2) values for calcitonin salmon, Glu(14)-calcitonin, and acetyl-calcitonin were 0.995, 0.996, and 0.993, respectively). Intra-assay precision in terms of relative standard deviation (%RSD) was less than 10% at all tested concentrations. The accuracy of the method was greater than 85% as measured by spiking 0.1, 0.3, and 1% of Glu(14)-calcitonin and acetyl-calcitonin into a stock calcitonin solution. Limits of detection for calcitonin, Glu(14)-calcitonin, and acetyl-calcitonin were 0.02, 0.03, and 0.04 µM, respectively, indicating that an impurity present at less than 0.1% (0.1 µM) of the drug product API concentration (107 µM) could be detected. Method validation studies analyzing bivalirudin and exenatide drug products exhibited similar results to calcitonin salmon in regard to high selectivity, sensitivity, precision, and linearity. Added benefits of using LC-HRMS-based methods are the ability to also determine amino acid composition, confirm peptide sequence, and quantify impurities, even when they are co-eluting, within a single experiment. LC-HRMS represents a promising approach for the quality control of peptides including the measurement of any peptide-related impurities. While the development work performed here is focus on peptide drug products, the principles could be adapted to peptide drug substance.

Modern analytics for naturally derived complex drug substances: NMR and MS tests for protamine sulfate from chum salmon.

This work describes orthogonal NMR and MS tests for the structure and composition of the drug protamine sulfate derived from chum salmon. The spectral response pattern obtained by 1D-(1)H-NMR and MS methods from salmon protamine, a mixture of four predominant peptide chains, is dependent on the amino acid sequence and abundance of each peptide. Thus, an assay was developed based on the ratios of alanine, glycine and arginine amino acid residue NMR peaks (relative to the arginine CδH proton signal) in this mixture that are unique to the salmon source. In addition, MS analysis provided sensitive sequence determination and impurity analysis based on shifts from exact masses. Spectra from protamine sulfate active pharmaceutical ingredient (API) suppliers and from a formulated drug product purchased from the US market were examined. Based on these marketplace survey data, NMR acceptance criteria for chum salmon derived protamine sulfate could be based on the absence of aromatic amino acid signals and on ratios of Ala ßH/Arg δH, Gly αH/Arg δH and Arg αH/Arg δH integrated areas of 2.4 ± 1%, 9.4 ± 3% and 50 ± 5%, respectively. For MS, acceptance criteria based on the presence of specific mass to charge (m/z) ratio peaks (m/z = +8 of 530.455, 540.841, 532.208 and 508.950) could be used for the four major peptides present in the mixture with relative abundances of 17 ± 1%, 31 ± 2%, 27 ± 1% and 25 ± 3%, respectively. The specificity of the combined NMR and MS assay was tested by comparison to data obtained from herring protamine which contains a different mixture of peptides with related amino acid sequences. Both assays were able to clearly distinguish protamine derived from these different natural sources.

Post-translational structural modifications of immunoglobulin G and their effect on biological activity.

The size, heterogeneity, and biological production process of protein therapeutics like monoclonal antibodies create unique challenges for their analysis and regulation compared with small molecules. Complete structural characterization of a molecule 1000-fold heavier than aspirin is no small feat. Biological post-translational modifications such as glycosylation further complicate their characterization and regulation. Even approved protein therapeutics are known to contain multiple structural variants in differing amounts. Structural modification occurs during production and storage as well as within patients after administration. Thus, the goals of manufacturers and regulators are to control and characterize this heterogeneity, not take on the impossible task of eliminating it. The aim of this review is to describe the structural heterogeneities known to occur with immunoglobulin G (IgG), note current detection and analytical strategies, establish their causes, and define their potential effects on the ultimate safety, purity, and potency of antibody therapeutics when known.

Pharmacodynamic evaluation of the activities of six parenteral vancomycin products available in the United States.

A recent report found that generic parenteral vancomycin products may not have in vivo efficacies equivalent to those of the innovator in a neutropenic murine thigh infection model despite having similar in vitro microbiological activities and murine serum pharmacokinetics. We compared the in vitro and in vivo activities of six of the parenteral vancomycin products available in the United States. The in vitro assessments for the potencies of the vancomycin products included MIC/minimal bactericidal concentration (MBC) determinations, quantifying the impact of human and murine serum on the MIC values, and time-kill studies. Also, the potencies of the vancomycin products were quantified with a biological assay, and the human and mouse serum protein binding rates for the vancomycin products were measured. The in vivo studies included dose-ranging experiments with the 6 vancomycin products for three isolates of Staphylococcus aureus in a neutropenic mouse thigh infection model. The pharmacokinetics of the vancomycin products were assessed in infected mice by population pharmacokinetic modeling. No differences were seen across the vancomycin products with regard to any in vitro evaluation. Inhibitory sigmoid maximal bacterial kill (Emax) modeling of the relationship between vancomycin dosage and the killing of the bacteria in mice in vivo yielded similar Emax and EC50 (drug exposure driving one-half Emax) values for bacterial killing. Further, there were no differences in the pharmacokinetic clearances of the 6 vancomycin products from infected mice. There were no important pharmacodynamic differences in the in vitro or in vivo activities among the six vancomycin products evaluated.

Development and validation of a liquid-chromatography tandem mass spectrometry method to determine in vitro and in vivo histamine release.

Histamine is an important biogenic amine involved in regulating numerous physiological and pathophysiological processes in humans and animals. To date, there have been very few studies focused on developing and validating sensitive liquid-chromatography-tandem mass spectrometric (LC-MS/MS) assays capable of quantitative trace level histamine analysis in biological matrices. In the present study, a rapid and sensitive LC-MS/MS assay, amenable to high throughput analysis was developed and validated to characterize in vitro and in vivo histamine release. The LC-MS/MS procedure incorporating deuterium labeled internal standards provides rapid resolution of histamine with excellent sensitivity, precision, and accuracy. Histamine eluted at 1.5 min and was well separated from endogenous plasma peaks. The total run time of the assay was 8.0 min. A linear (r(2) ≥ 0.99) instrument response over the entire concentration range of 1.0-1000 ng/mL was observed. Excellent accuracy (error ± 3.4%) and precision (CV ± 10%) of the assay was demonstrated, with the lower limit of quantitation (LLOQ) at 15.6 ng/mL. The validated LC-MS/MS assay was applied to determine histamine release in both in vitro and in vivo models. Peritoneal mast cells treated with prototypical degranulating agents (Compound 48/80 and Teicoplanin) showed that the two chemicals caused approximately 40% histamine release. In rats, using this assay, basal histamine plasma levels were typically under 100 ng/mL. Treatment with an agent suspected of causing anaphylactic type reactions resulted in plasma histamine levels to increase above 3000 ng/mL. The LC-MS/MS assay presented in this study can be applied to further characterize the physiological and pathophysiological role of histamine release in complex in vitro and in vivo models. Importantly, the LC-MS/MS assay may be useful in assessing active pharmaceutical ingredient-mediated degranulation and anaphylaxis as part of either a pre-market or a post-market assessment of drug products.

Direct site-specific glycoform identification and quantitative comparison of glycoprotein therapeutics: imiglucerase and velaglucerase alfa.

Gaucher disease, the most common lysosomal metabolic disorder, can be treated with enzyme replacement therapy (ERT). Recombinant human glucocerebrosidase imiglucerase (Cerezyme(®)), produced in Chinese hamster ovary cells, has been used for ERT of Gaucher disease for 20 years. Another recombinant glucocerebrosidase velaglucerase alfa (VPRIV), expressed in a human fibroblast cell line, was approved by the US Food and Drug Administration in 2010. The amino acid sequence difference at residue 495 of these two products is well documented. The overall N-linked qualitative glycan composition of these two products has also been reported previously. Herein, employing our recently developed approach utilizing isobaric tandem mass tag (TMT) labeling and an LTQ Orbitrap XL electron transfer dissociation (ETD) hybrid mass spectrometer, the site-specific glycoforms of these products were identified with ETD and collision-induced dissociation (CID) spectra. The quantitative comparison of site-specific glycans was achieved utilizing higher-energy collisional dissociation (HCD) spectra with a NanoMate used as both a fraction collector and a sample introduction device. From the trypsin-digested mixture of these two products, over 90 glycopeptides were identified by accurate mass matching. In addition to those previously reported, additional glycopeptides were detected with moderate abundance. The relative amount of each glycoform at a specific glycosylation site was determined based on reporter signal intensities of the TMT labeling reagents. This is the first report of site-specific simultaneous qualitative and quantitative comparison of glycoforms for Cerezyme(®) and VPRIV. The results demonstrate that this method could be utilized for biosimilarity determination and counterfeit identification of glycoproteins.

Identification of site-specific heterogeneity in peptide drugs using intact mass spectrometry with electron transfer dissociation.

RATIONALE: Protamine sulfate is a peptide drug product consisting of multiple basic peptides. As traditional high-performance liquid chromatography (HPLC) separation methods may not resolve these peptides, as well as any possible peptide-related impurities, a method utilizing top-down mass spectrometry was developed for the characterization of complex peptide drug products, including any low-level impurities, which is described in this study. METHODS: Herring protamine sulfate was used as a model system to demonstrate the applicability of the method. Direct infusion mass spectrometry and tandem mass spectrometry (MS/MS) on a high-resolution, mass accurate instrument with electron transfer dissociation (ETD) were used to identify all the species present in the herring protamine sulfate sample. Identifications were made based on mass accuracy analysis as well as MS/MS fragmentation patterns. RESULTS: Complete sequence coverage of the three abundant herring protamine peptides was obtained using the top-down ETD-MS/MS method, which also identified a discrepancy with the published herring protamine peptide sequences. Additionally, three low-abundance related peptide species were also identified and fully characterized. These three peptides had not previously been reported as herring protamine peptides, but could be related to the published sequences through amino acid additions and/or substitutions. CONCLUSIONS: A method for the characterization of protamine, a complex peptide drug product, was developed that can be extended to other complex peptide or protein drug products. The selectivity and sensitivity of this method improves a regulator's ability to identify peptide impurities not previously observed using the established methods and presents an opportunity to better understand the composition of complex peptide drug products.