ABSTRACT
The cycle time of a standard liquid chromatography (LC) system is the sum of the time for the chromatographic run and the autosampler injection sequence. Although LC separation times in the 1-10 s range have been demonstrated, injection sequences are commonly >15 s, limiting throughput possible with LC separations. Further, such separations are performed on relatively large bore columns requiring flow rates of ≥5 mL/min, thus generating large volumes of mobile phase waste when used for large scale screening and increasing the difficulty in interfacing to mass spectrometry. Here, a droplet injector system was established that replaces the autosampler with a four-port, two-position valve equipped with a 20 nL internal loop interfaced to a syringe pump and a three-axis positioner to withdraw sample droplets from a well plate. In the system, sample and immiscible fluid are pulled alternately from a well plate into a capillary and then through the injection valve. The valve is actuated when sample fills the loop to allow sequential injection of samples at high throughput. Capillary LC columns with 300 µm inner diameter were used to reduce the consumption of mobile phase and sample. The system achieved 96 separations of 20 nL droplet samples containing 3 components in as little as 8.1 min with 5-s cycle time. This system was coupled to a mass spectrometer through an electrospray ionization source for high-throughput chemical reaction screening.
ABSTRACT
An experimental approach is described for late-stage lead diversification of frontrunner drug candidates using nanomole-scale amounts of lead compounds for structure-activity relationship development. The process utilizes C-H bond activation methods to explore chemical space by transforming candidates into newly functionalized leads. A key to success is the utilization of microcryoprobe nuclear magnetic resonance (NMR) spectroscopy, which permits the use of low amounts of lead compounds (1-5 µmol). The approach delivers multiple analogues from a single lead at nanomole-scale amounts as DMSO-d6 stock solutions with a known structure and concentration for in vitro pharmacology and absorption, distribution, metabolism, and excretion testing. To demonstrate the feasibility of this approach, we have used the antihistamine agent loratadine (1). Twenty-six analogues of loratadine were isolated and fully characterized by NMR. Informative SAR analogues were identified, which display potent affinity for the human histamine H1 receptor and improved metabolic stability.
Subject(s)
Loratadine/analogs & derivatives , Loratadine/pharmacokinetics , Structure-Activity Relationship , Animals , Chromatography, High Pressure Liquid , Cytochrome P-450 Enzyme System/genetics , Cytochrome P-450 Enzyme System/metabolism , Dimethyl Sulfoxide/chemistry , Dogs , Drug Discovery/methods , Histamine H1 Antagonists, Non-Sedating/chemistry , Histamine H1 Antagonists, Non-Sedating/pharmacology , Humans , Hydrogen Bonding , Inactivation, Metabolic , Loratadine/chemistry , Magnetic Resonance Spectroscopy , Metalloporphyrins/chemistry , Metalloporphyrins/metabolism , Microsomes, Liver/drug effects , Microsomes, Liver/metabolism , Rabbits , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , Tandem Mass Spectrometry , Tissue DistributionABSTRACT
A diastereoselective, Pd-catalyzed Suzuki-Miyaura coupling reaction of geminal bis(boryl)cyclopropanes has been developed. The reaction offers a highly modular approach to the synthesis of tertiary cyclopropylboronic esters. The resulting boronic esters may be further functionalized to afford a range of gem-disubstituted cyclopropanes, which represent an important structural motif in the pharmaceutical industry. Sequential Suzuki-Miyaura cross-coupling reactions of gem-bis(boryl)cyclopropanes are also reported. The coupling protocols are compatible with a broad range of functionalized aryl and heteroaryl bromides.
ABSTRACT
Driven by the ever-increasing pace of drug discovery and the need to push the boundaries of unexplored chemical space, medicinal chemists are routinely turning to unusual strained bioisosteres such as bicyclo[1.1.1]pentane, azetidine, and cyclobutane to modify their lead compounds. Too often, however, the difficulty of installing these fragments surpasses the challenges posed even by the construction of the parent drug scaffold. This full account describes the development and application of a general strategy where spring-loaded, strained C-C and C-N bonds react with amines to allow for the "any-stage" installation of small, strained ring systems. In addition to the functionalization of small building blocks and late-stage intermediates, the methodology has been applied to bioconjugation and peptide labeling. For the first time, the stereospecific strain-release "cyclopentylation" of amines, alcohols, thiols, carboxylic acids, and other heteroatoms is introduced. This report describes the development, synthesis, scope of reaction, bioconjugation, and synthetic comparisons of four new chiral "cyclopentylation" reagents.
Subject(s)
Alcohols/chemistry , Amines/chemistry , Carboxylic Acids/chemistry , Sulfhydryl Compounds/chemistry , Alcohols/chemical synthesis , Amines/chemical synthesis , Carboxylic Acids/chemical synthesis , Molecular Structure , Stereoisomerism , Sulfhydryl Compounds/chemical synthesisABSTRACT
A fully automated countercurrent chromatography system has been constructed to rapidly screen the commonly used heptane/ethyl acetate/methanol/water solvent system series and translate the results to preparative scale separations. The system utilizes "on-demand" preparation of the heptane/ethyl acetate/methanol/water solvent system upper and lower phases. Elution-extrusion countercurrent chromatography was combined with non-dynamic equilibrium injection reducing the screening time for each heptane/ethyl acetate/methanol/water system to 17 min. The result enabled solvent system development to be reduced to under 2 h. The countercurrent chromatography system was interfaced with a mass spectrometer to allow selective detection of target components in crude medicinal chemistry reaction mixtures. Mass-directed preparative countercurrent chromatography purification was demonstrated for the first time using a synthetic tetrazole epoxide derived from a routine medicinal chemistry support workflow.
Subject(s)
Chromatography, High Pressure Liquid , Drug Discovery/methods , Mass Spectrometry , Automation , Countercurrent Distribution , Limit of Detection , Molecular Structure , Solvents/chemistryABSTRACT
A general method for constraining peptide conformations via linkage of aromatic sidechains has been developed. Macrocyclization of suitably functionalized tri-, tetra- and pentapeptides via Suzuki-Miyaura cross-coupling has been used to generate side chain to side chain, biaryl-bridged 14- to 21-membered macrocyclic peptides. Biaryl bridges possessing three different configurations, meta-meta, meta-ortho, and ortho-meta, were systematically explored through regiochemical variation of the aryl halide and aryl boronate coupling partners, allowing fine-tuning of the resultant macrocycle conformation. Suzuki-Miyaura macrocyclizations were successfully achieved both in solution and on solid phase for all three sizes of peptide. This approach constitutes a means of constraining peptide conformation via direct carbogenic fusion of side chains of naturally occurring amino acids such as phenylalanine and tyrosine, and so is complementary to strategies involving non-natural, for example, hydrocarbon, bridges.