ABSTRACT
The spatial magnetization texture of a cylindrical nanowire has been determined by Transmission X-ray Microscopy (TXM) and X-ray magnetic circular dichroism (XMCD). For this purpose, nanowires with designed geometry, consisting of CoNi/Ni periodic segments, have been grown by designed electrodeposition into alumina templates. Experimental data allow one to conclude the presence of mono- and trivortex magnetic domains in CoNi segments but, unusually, these states are characterized by an asymmetric XMCD contrast across the nanowire's section. Micromagnetic modelling shows non-trivial three-dimensional structures with ellipsoidal vortex cores and non-axially symmetric magnetization along the nanowire direction. The modelled TXM contrast of micromagnetic structures allows to correlate the experimental asymmetric XMCD contrast to the easy axis direction of the uniaxial magnetocrystalline anisotropy.
ABSTRACT
Cylindrical magnetic nanowires are promising materials that have the potential to be used in a wide range of applications. The versatility of these nanostructures is based on the tunability of their magnetic properties, which is achieved by appropriately selecting their composition and morphology. In addition, stochastic behavior has attracted attention in the development of neuromorphic devices relying on probabilistic magnetization switching. Here, we present a study of the magnetization reversal process in multisegmented CoNi/Cu nanowires. Nonstandard 2D magnetic maps, recorded under an in-plane magnetic field, produce datasets that correlate with magnetoresistance measurements and micromagnetic simulations. From this process, the contribution of the individual segments to the demagnetization process can be distinguished. The results show that the magnetization reversal in these nanowires does not occur through a single Barkhausen jump, but rather by multistep switching, as individual CoNi segments in the NW undergo a magnetization reversal. The existence of vortex states is confirmed by their footprint in the magnetoresistance and 2D MFM maps. In addition, the stochasticity of the magnetization reversal is analysed. On the one hand, we observe different switching fields among the segments due to a slight variation in geometrical parameters or magnetic anisotropy. On the other hand, the stochasticity is observed in a series of repetitions of the magnetization reversal processes for the same NW under the same conditions.
ABSTRACT
The expanding of planar magnetic structures into three dimensions (3D) creates the possibility of tuning the conventional magnetic textures or producing novel effects and functionalities by tailoring their curvature [...].
ABSTRACT
Magnetic nanomaterials are of great interest due to their potential use in data storage, biotechnology, or spintronic based devices, among others. The control of magnetism at such scale entails complexing the nanostructures by tuning their composition, shape, sizes, or even several of these properties at the same time, in order to search for new phenomena or optimize their performance. An interesting pathway to affect the dynamics of the magnetization reversal in ferromagnetic nanostructures is to introduce geometrical modulations to act as nucleation or pinning centers for the magnetic domain walls. Considering the case of 3D magnetic nanowires, the modulation of the diameter across their length can produce such effect as long as the segment diameter transition is sharp enough. In this work, diameter modulated Fe67Co33 ferromagnetic nanowires have been grown into the prepatterned diameter modulated nanopores of anodized Al2O3 membranes. Their morphological and compositional characterization was carried out by electron-based microscopy, while their magnetic behavior has been measured on both the nanowire array as well as for individual bisegmented nanowires after being released from the alumina template. The magnetic hysteresis loops, together with the evaluation of First Order Reversal Curve diagrams, point out that the magnetization reversal of the bisegmented FeCo nanowires is carried out in two steps. These two stages are interpreted by micromagnetic modeling, where a shell of the wide segment reverses its magnetization first, followed by the reversal of its core together with the narrow segment of the nanowire at once.
ABSTRACT
Advances in cylindrical nanowires for 3D information technologies profit from intrinsic curvature that introduces significant differences with regards to planar systems. A model is proposed to control the stochastic and deterministic coding of remanent 3D complex vortex configurations in designed multilayered (magnetic/non-magnetic) cylindrical nanowires. This concept, introduced by micromagnetic simulations, is experimentally confirmed by magnetic imaging in FeCo/Cu multilayered nanowires. The control over the random/deterministic vortex states configurations is achieved by a suitable geometrical interface tilting of almost non-interacting FeCo segments with respect to the nanowire axis, together with the relative orientation of the perpendicular magnetic field. The proper design of the segments' geometry (e.g. tilting) in cylindrical nanowires opens multiple opportunities for advanced nanotechnologies in 3D magnetic networks.
ABSTRACT
Cylindrical magnetic nanowires show great potential for 3D applications such as magnetic recording, shift registers, and logic gates, as well as in sensing architectures or biomedicine. Their cylindrical geometry leads to interesting properties of the local domain structure, leading to multifunctional responses to magnetic fields and electric currents, mechanical stresses, or thermal gradients. This review article is summarizing the work carried out in our group on the fabrication and magnetic characterization of cylindrical magnetic nanowires with modulated geometry and anisotropy. The nanowires are prepared by electrochemical methods allowing the fabrication of magnetic nanowires with precise control over geometry, morphology, and composition. Different routes to control the magnetization configuration and its dynamics through the geometry and magnetocrystalline anisotropy are presented. The diameter modulations change the typical single domain state present in cubic nanowires, providing the possibility to confine or pin circular domains or domain walls in each segment. The control and stabilization of domains and domain walls in cylindrical wires have been achieved in multisegmented structures by alternating magnetic segments of different magnetic properties (producing alternative anisotropy) or with non-magnetic layers. The results point out the relevance of the geometry and magnetocrystalline anisotropy to promote the occurrence of stable magnetochiral structures and provide further information for the design of cylindrical nanowires for multiple applications.
ABSTRACT
CoNi/Ni multisegmented cylindrical nanowires were synthesized via an electrochemical route. The wires are 140 nm in diameter, with 1000 nm long Ni segments and CoNi segments between 600 and 1400 nm in length. The magnetic configuration was imaged by XMCD-PEEM in the demagnetized state and at remanence after magnetizing axially and perpendicularly. Ni segments, with cubic crystal symmetry, show an axial magnetic configuration with a small curling component at the surface. In turn, CoNi segments, with hexagonal crystal symmetry and a strong magnetocrystalline anisotropy perpendicular to the nanowires, show a single vortex state in the shorter segments and multivortex or multitransverse magnetic configurations in medium and long segments, respectively. A detailed study by micromagnetic simulations reveals that the magnetic configuration is determined mainly by the coupling between soft Ni and harder CoNi segments. For short CoNi segments, Ni segments are magnetostatically coupled and the chirality of the single vortex formed in CoNi remains the same as that of the curling in neighboring Ni segments. For longer CoNi segments, the remanent state is either the multivortex or multitransverse state depending on whether the previously applied field was parallel or perpendicular to the magnetocrystalline axis. The results point out the relevance of the cylindrical geometry to promote the occurrence of complex magneto-chiral effects and provide key information for the design of cylindrical magnetic nanowires for multiple applications.
ABSTRACT
The magnetic configurations of cylindrical Co-rich CoNi nanowires have been quantitatively analyzed at the nanoscale by electron holography and correlated to local structural and chemical properties. The nanowires display grains of both face-centered cubic (fcc) and hexagonal close packed (hcp) crystal structures, with grain boundaries parallel to the nanowire axis direction. Electron holography evidences the existence of a complex exotic magnetic configuration characterized by two distinctly different types of magnetic configurations within a single nanowire: an array of periodical vortices separating small transverse domains in hcp-rich regions with perpendicular easy axis orientation and a mostly axial configuration parallel to the nanowire axis in regions with fcc grains. These vastly different domains are found to be caused by local variations in the chemical composition modifying the crystalline orientation and/or structure, which give rise to change in magnetic anisotropies. Micromagnetic simulations, including the structural properties that have been experimentally determined, allow for a deeper understanding of the complex magnetic states observed by electron holography.
ABSTRACT
"Domain wall traps" have been engineered and well-exploited in nanostrips by creating a geometrical trapping site, e.g. a single notch along a stripe, compared to diameter-modulated (DM) cylindrical magnetic nanowires (NWs) where multi-segmented DM-NWs have been generally studied. Here, we report our systematic study on the magnetization behavior, domain wall structure and its nucleation/propagation in tri-segmented diameter-modulated Ni nanowires, a simple system to investigate the magnetization reversal as function of segment geometry and lay-out order. We find out that the magnetization behavior of single Ni DM-NWs exhibits the significance of positional ordering of thick and thin segments, distinguished by two distinct geometries including: dumbbell-type (type I) and rolling pin-type (type II). Based on experimental and theoretical simulations, it was evidenced that the wide-narrow junctions create trap sites for domain walls where the narrow segment restricts their motion. This type of geometrically engineered nanowires exhibit potential efficiency for future novel spintronic devices in particular when assembled in arrays of DM-NWs as a practical three-dimensional memory device.
ABSTRACT
A comparative study of the magnetic properties of the arrays of Co nanowires and nanotubes with large external diameters (180 nm) has been carried out. The nanowires/nanotubes were grown by electrodeposition into the self-assembled pores of anodic alumina membranes. The experimental study of their magnetic behavior was focused on the angular dependence of hysteresis loops and their parameters. In both nanowire and nanotube arrays, from the analysis of experimental data, effective longitudinal magnetic anisotropy is concluded, which is stronger in the case of the nanotube array. In addition, the extremely small remanence observed for all loops indicates the important role played by magnetostatic interactions. Micromagnetic simulations were first performed considering intrinsic shape and magnetocrystalline anisotropy terms, together with an effective easy-plane anisotropy to account for those magnetostatic interactions. A qualitative agreement between experiments and simulations is found despite the complexity introduced by the intrinsic and extrinsic array properties (i.e., large diameters, grain structure, and array configuration). In addition, simulations were also carried out for individual nanowire/nanotube with a particular emphasis to understand their differences at the remanence, due to pure geometry contribution.
ABSTRACT
The unidirectional motion of information carriers such as domain walls in magnetic nanostrips is a key feature for many future spintronic applications based on shift registers. This magnetic ratchet effect has so far been achieved in a limited number of complex nanomagnetic structures, for example, by lithographically engineered pinning sites. Here we report on a simple remagnetization ratchet originated in the asymmetric potential from the designed increasing lengths of magnetostatically coupled ferromagnetic segments in FeCo/Cu cylindrical nanowires. The magnetization reversal in neighboring segments propagates sequentially in steps starting from the shorter segments, irrespective of the applied field direction. This natural and efficient ratchet offers alternatives for the design of three-dimensional advanced storage and logic devices.
ABSTRACT
Diameter-modulated nanowires offer an important paradigm to design the magnetization response of 3D magnetic nanostructures by engineering the domain wall pinning. With the aim to understand its nature and to control the process, we analyze the magnetization response in FeCo periodically modulated polycrystalline nanowires varying the minor segment diameter. Our modelling indicates a very complex behavior with a strong dependence on the disorder distribution and an important role of topologically non-trivial magnetization structures. We demonstrate that modulated nanowires with a small diameter difference are characterized by an increased coercive field in comparison to the straight ones, which is explained by a formation of topologically protected walls formed by two 3D skyrmions with opposite chiralities. For a large diameter difference we report the occurrence of a novel pinning type called here the "corkscrew": the magnetization of the large diameter segment forms a skyrmion tube with a core position in a helical modulation along the nanowire. This structure is pinned at the constriction and in order to penetrate the narrow segments the vortex/skyrmion core size should be reduced.
ABSTRACT
A colloidally stable dispersion of anisotropic Ni nanowires in water has been achieved showing good performance as a T2-contrast agent in magnetic resonance imaging (MRI). A wet chemistry approach has been developed that renders water dispersible Ni nanowires of controlled size. Firstly, an array of Ni/Au multilayer nanowires of tailored dimensions was synthesized by pulsed electrodeposition within a porous alumina template in a three-electrode cell at room-temperature. Then, Ni/Au multilayer nanowires were released from the template followed by the isolation of the Ni segments through a two-step acidic etching, ending up with a colloidally stable dispersion of poly-acrylic acid (PAA)-coated Ni nanowires in water solution. The PAA-coated Ni nanowires have been morphologically and structurally characterized by scanning and transmission electron microscopy (SEM, TEM, respectively), whereas their ferromagnetic properties were studied using a SQUID-magnetometer. Importantly, relaxivity properties (transversal relaxivity, r2) indicated good performance of PAA-coated Ni nanowires as a T2-contrast agent at 1.41 T and body temperature, with values as large as those of commercial contrast agents based on iron oxide nanoparticles. MRI phantom imaging at clinical fields of 3 T confirmed the dark contrast effect of PAA-coated Ni nanowires, as compared to a water control, which opens a new window of opportunities for anisotropic metal nanostructures as contrast agents in MRI applications.
ABSTRACT
The comprehension of the magnetic configuration in FeCoCu nanowires with a diameter-modulated cylindrical geometry will allow controlling the domain wall motion in this low-dimensional system under the application of magnetic fields and/or the injection of current pulses. Here we perform a quantitative magnetic characterization of isolated diameter-modulated FeCoCu nanowires by combining nanoscale magnetic characterization techniques such as electron holography, magnetic force microscopy, and micromagnetic simulations. Local reconstructions of the magnetic distribution show the diameter-modulated geometry of the wires induces the formation of vortex-like structures and magnetic charges in the regions where the diameter is varied. Vortex-like structures modify the axial alignment of the magnetization in large-diameter segments. Moreover, the magnetic charges control the demagnetizing field distribution, promoting a flux-closure stray field configuration around large-diameter segments and keeping the demagnetizing field parallel to the NW's magnetization around small diameter segments. The detailed description of the remanent state in diameter-modulated cylindrical FeCoCu nanowires allows us to provide a clear explanation of the origin of bright and dark contrast observed in magnetic force microscopy images, which have the same feature of magnetic domain walls. This work establishes the primary knowledge required for future magnetization reversal studies with the aim of searching efficient modulated geometries that allow an optimum and controlled domain wall propagation.
ABSTRACT
Series of high hexagonally ordered compositionally modulated nanowire arrays, with different Cu layer and FeCoCu segment thicknesses and a constant diameter of 35 nm, were fabricated by electroplating from a single electrolytic bath into anodic aluminum oxide membranes. The objective of the study was to determine the influence of ferromagnetic (FM) segment and non-ferromagnetic (NFM) layer thickness on the magnetic properties, particularly coercivity and magnetic interactions. First-order reversal curve (FORC) measurements and simulations were performed to quantify the effect of the inter-/intra-nanowire magnetostatic interactions on the coercivity and interaction field distributions. The FORC coercivity increases for a thick NFM layer and long FM segments due to decoupling of the the FM segments and the increased shape anisotropy, respectively. On the other hand, the interaction field presents a parallel strong reduction for a thick NFM layer and thin FM segments, which is ascribed to a similar NFM/FM thickness ratio and degree of FM segment decoupling along the nanowire.
ABSTRACT
The use of 3d transition metal-based magnetic nanowires (NWs) for permanent magnet applications requires large magnetocrystalline anisotropy energy (MAE), which in combination with the NWs' magnetic shape anisotropy yields magnetic hardening and an enhancement of the magnetic energy product. Here, we report on the significant increase in MAE by 125 kJ m(-3) in Fe30Co70 NWs with diameters of 20-150 nm embedded in anodic aluminum oxide templates by adding 5 at.% Cu and subsequent annealing at 900 K. Ferromagnetic resonance (FMR) reveals that this enhancement of MAE is twice as large as the enhancement of MAE in annealed, but undoped NWs. X-ray diffraction (XRD) analysis suggests that upon annealing the immiscible Cu in FeCo NWs causes a crystal reorientation with respect to the NW axis with a considerable distortion of the bcc FeCo lattice. This strain is most likely the origin of the strongly enhanced MAE.
ABSTRACT
The three dimensional nature of cylindrical magnetic nanowires has opened a new way to control the domain configuration as well as the magnetization reversal process. The pinning effect of the periodic diameter modulations on the domain wall propagation in FeCoCu individual nanowires is determined by Magnetic Force Microscopy, MFM. A main bistable magnetic configuration is firstly concluded from MFM images characterized by the spin reversal between two nearly single domain states with opposite axial magnetization. Complementary micromagnetic simulations confirm a vortex mediated magnetization reversal process. A non-standard variable field MFM imaging procedure allows us to observe metastable magnetic states where the propagating domain wall is pinned at certain positions with enlarged diameter. Moreover, it is demonstrated that it is possible to control the position of the pinned domain walls by an external magnetic field.
ABSTRACT
Control over the magnetization reversal process of nanowires is essential to current advances in modern spintronic media and magnetic data storage. Much effort has been devoted to permalloy nanostrips with rectangular cross section and vanishing crystalline anisotropy. Our aim was to unveil and control the reversal process in FeCoCu nanowires with significant anisotropy and circular cross section with tailored periodical modulations in diameter. Magneto-optical Kerr effect measurements and their angular dependence performed on individual nanowires together with their analysis allow us to conclude that the demagnetization process takes place due to the propagation of a single vortex domain wall which is eventually pinned at given modulations with slightly higher energy barrier. In addition these results create new expectations for further controlling of the propagation of single and multiple domain walls.
ABSTRACT
Cylindrical Fe28Co67Cu5 nanowires modulated in diameter between 22 and 35 nm are synthesized by electroplating into the nanopores of alumina membranes. High-sensitivity MFM imaging (with a detection noise of 1 µN m(-1)) reveals the presence of single-domain structures in remanence with strong contrast at the ends of the nanowires, as well as at the transition regions where the diameter is modulated. Micromagnetic simulations suggest that curling of the magnetization takes place at these transition sites, extending over 10-20 nm and giving rise to stray fields measurable with our MFM. An additional weaker contrast is imaged, which is interpreted to arise from inhomogeneities in the nanowire diameter.
ABSTRACT
3d transition metal-based magnetic nanowires (NWs) are currently considered as potential candidates for alternative rare-earth-free alloys as novel permanent magnets. Here, we report on the magnetic hardening of Fe30Co70 nanowires in anodic aluminium oxide templates with diameters of 20 nm and 40 nm (length 6 µm and 7.5 µm, respectively) by means of magnetic pinning at the tips of the NWs. We observe that a 3-4 nm naturally formed ferrimagnetic FeCo oxide layer covering the tip of the FeCo NW increases the coercive field by 20%, indicating that domain wall nucleation starts at the tip of the magnetic NW. Ferromagnetic resonance (FMR) measurements were used to quantify the magnetic uniaxial anisotropy energy of the samples. Micromagnetic simulations support our experimental findings, showing that the increase of the coercive field can be achieved by controlling domain wall nucleation using magnetic materials with antiferromagnetic exchange coupling, i.e. antiferromagnets or ferrimagnets, as a capping layer at the nanowire tips.
