ABSTRACT
Lytic polysaccharide monooxygenases (LPMOs) are oxidative enzymes that help break down lignocellulose, making them highly attractive for improving biomass utilization in industrial biotechnology. The catalytically essential N-terminal histidine (His1) of LPMOs is post-translationally modified by methylation in filamentous fungi to protect them from auto-oxidative inactivation, however, the responsible methyltransferase enzyme is unknown. Using mass-spectrometry-based quantitative proteomics in combination with systematic CRISPR/Cas9 knockout screening in Aspergillus nidulans, we identify the N-terminal histidine methyltransferase (NHMT) encoded by the gene AN4663. Targeted proteomics confirm that NHMT was solely responsible for His1 methylation of LPMOs. NHMT is predicted to encode a unique seven-transmembrane segment anchoring a soluble methyltransferase domain. Co-localization studies show endoplasmic reticulum residence of NHMT and co-expression in the industrial production yeast Komagataella phaffii with LPMOs results in His1 methylation of the LPMOs. This demonstrates the biotechnological potential of recombinant production of proteins and peptides harbouring this specific post-translational modification.
Subject(s)
Histidine , Mixed Function Oxygenases , Mixed Function Oxygenases/metabolism , Histidine/genetics , Histidine/metabolism , Methylation , Methyltransferases/genetics , Methyltransferases/metabolism , Polysaccharides/metabolism , Protein Processing, Post-TranslationalABSTRACT
Lytic polysaccharide monooxygenases (LPMOs) are industrially relevant enzymes that utilize a copper co-factor and an oxygen species to break down recalcitrant polysaccharides. These enzymes are secreted by microorganisms and are used in lignocellulosic refineries. As such, they are interesting from both the ecological/biological and industrial perspectives. Here we describe the development of a new fluorescence-based kinetic LPMO activity assay. The assay is based on the enzymatic production of fluorescein from its reduced counterpart. The assay can detect as little as 1 nM LPMO with optimized assay conditions. Furthermore, the reduced fluorescein substrate can also be used to identify peroxidase activity as seen by the formation of fluorescein by horseradish peroxidase. The assay was shown to work well at relatively low H2O2 and dehydroascorbate concentrations. The applicability of the assay was demonstrated.
ABSTRACT
Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes of industrial and biological importance. In particular, LPMOs play important roles in fungal lifestyle. No inhibitors of LPMOs have yet been reported. In this study, a diverse library of 100 plant extracts was screened for LPMO activity-modulating effects. By employing protein crystallography and LC-MS, we successfully identified a natural LPMO inhibitor. Extract screening revealed a significant LPMO inhibition by methanolic extract of Cinnamomum cassia (cinnamon), which inhibited LsAA9A LPMO from Lentinus similis in a concentration-dependent manner. With a notable exception, other microbial LPMOs from families AA9 and AA10 were also inhibited by this cinnamon extract. The polyphenol cinnamtannin B1 was identified as the inhibitory component by crystallography. Cinnamtannin B1 was bound to the surface of LsAA9A at two distinct binding sites: one close to the active site and another at a pocket on the opposite side of the protein. Independent characterization of cinnamon extract by LC-MS and subsequent activity measurements confirmed that the compound inhibiting LsAA9A was cinnamtannin B1. The results of this study show that specific natural LPMO inhibitors of plant origin exist in nature, providing the opportunity for future exploitation of such compounds within various biotechnological contexts.
Subject(s)
Mixed Function Oxygenases , Plant Extracts , Fungal Proteins , Lentinula , Plant Extracts/pharmacology , PolysaccharidesABSTRACT
The histidine brace (His-brace) is a copper-binding motif that is associated with both oxidative enzymes and proteinaceous copper chaperones. Here, we used biochemical and structural methods to characterize mutants of a His-brace-containing copper chaperone from Pseudomonas fluorescens (PfCopC). A total of 15 amino acid variants in primary and second-sphere residues were produced and characterized in terms of their copper binding and redox properties. PfCopC has a very high affinity for Cu(II) and also binds Cu(I). A high reorganization barrier likely prevents redox cycling and, thus, catalysis. In contrast, mutations in the conserved second-sphere Glu27 enable slow oxidation of ascorbate. The crystal structure of the variant E27A confirmed copper binding at the His-brace. Unexpectedly, Asp83 at the equatorial position was shown to be indispensable for Cu(II) binding in the His-brace of PfCopC. A PfCopC mutant that was designed to mimic the His-brace from lytic polysaccharide monooxygenase-like family X325 did not bind Cu(II), but was still able to bind Cu(I). These results highlight the importance of the proteinaceous environment around the copper His-brace for reactivity and, thus, the difference between enzyme and chaperone.
Subject(s)
Amino Acid Substitution , Bacterial Proteins/chemistry , Copper/chemistry , Molecular Chaperones/chemistry , Mutation, Missense , Pseudomonas fluorescens/chemistry , Amino Acid Motifs , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Copper/metabolism , Histidine/chemistry , Histidine/genetics , Histidine/metabolism , Molecular Chaperones/genetics , Molecular Chaperones/metabolism , Pseudomonas fluorescens/genetics , Pseudomonas fluorescens/metabolismABSTRACT
Environmentally friendly sources of energy and chemicals are essential constituents of a sustainable society. An important step toward this goal is the utilization of biomass to supply building blocks for future biorefineries. Lytic polysaccharide monooxygenases (LPMOs) are enzymes that play a critical role in breaking the chemical bonds in the most abundant polymers found in recalcitrant biomass, such as cellulose and chitin. To use them in industrial processes they need to be produced in high titers in cell factories. Predicting optimal strategies for producing LPMOs is often nontrivial, and methods allowing for screening several strategies simultaneously are therefore needed. Here, we present a standardized platform for cloning LPMOs. The platform allows users to combine gene fragments with 14 different expression vectors in a simple 15 min reaction, thus enabling rapid exploration of several gene contexts, hosts, and expression strategies in parallel. The open-source LyGo platform is accompanied by easy-to-follow online protocols for both cloning and expression. As a demonstration of its utility, we explore different strategies for expressing several different LPMOs in Escherichia coli, Bacillus subtilis, and Komagataella phaffii.
Subject(s)
Mixed Function Oxygenases/metabolism , Polysaccharides/metabolism , Bacillus subtilis/metabolism , Escherichia coli/metabolism , Saccharomycetales/metabolismABSTRACT
BACKGROUND: Lytic polysaccharide monooxygenases (LPMOs) are important industrial enzymes known for their catalytic degradation of recalcitrant polymers such as cellulose or chitin. Their activity can be measured by lengthy HPLC methods, while high-throughput methods are less specific. A fast and specific LPMO assay would simplify screening for new or engineered LPMOs and accelerate biochemical characterization. RESULTS: A novel LPMO activity assay was developed based on the production of the dye phenolphthalein (PHP) from its reduced counterpart (rPHP). The colour response of rPHP oxidisation catalysed by the cellulose-specific LPMO from Thermoascus aurantiacus (TaAA9A), was found to increase tenfold by adding dehydroascorbate (DHA) as a co-substrate. The assay using a combination of rPHP and DHA was tested on 12 different metallo-enzymes, but only the LPMOs catalysed this reaction. The assay was optimized for characterization of TaAA9A and showed a sensitivity of 15 nM after 30 min incubation. It followed apparent Michaelis-Menten kinetics with kcat = 0.09 s-1 and KM = 244 µM, and the assay was used to confirm stoichiometric copper-enzyme binding and enzyme unfolding at a temperature of approximately 60 °C. DHA, glutathione and fructose were found to enhance LPMO oxidation of rPHP and in the optimized assay conditions these co-substrates also enabled cellulose degradation. CONCLUSIONS: This novel and specific LPMO assay can be carried out in a convenient microtiter plate format ready for high-throughput screening and enzyme characterization. DHA was the best co-substrate tested for oxidation of rPHP and this preference appears to be LPMO-specific. The identified co-substrates DHA and fructose are not normally considered as LPMO co-substrates but here they are shown to facilitate both oxidation of rPHP and degradation of cellulose. This is a rare example of a finding from a high-throughput assay that directly translate into enzyme activity on an insoluble substrate. The rPHP-based assay thus expands our understanding of LPMO catalysed reactions and has the potential to characterize LPMO activity in industrial settings, where usual co-substrates such as ascorbate and oxygen are depleted.
ABSTRACT
Lytic polysaccharide monooxygenases (LPMOs) are mononuclear copper enzymes that catalyse the oxidative cleavage of glycosidic bonds. They are characterised by two histidine residues that coordinate copper in a configuration termed the Cu-histidine brace. Although first identified in bacteria and fungi, LPMOs have since been found in all biological kingdoms. LPMOs are now included in commercial enzyme cocktails used in industrial biorefineries. This has led to increased process yield due to the synergistic action of LPMOs with glycoside hydrolases. However, the introduction of LPMOs makes control of the enzymatic step in industrial stirred-tank reactors more challenging, and the operational stability of the enzymes is reduced. It is clear that much is still to be learned about the interaction between LPMOs and their complex natural and industrial environments, and fundamental scientific studies are required towards this end. Several atomic-resolution structures have been solved providing detailed information on the Cu-coordination sphere and the interaction with the polysaccharide substrate. However, the molecular mechanisms of LPMOs are still the subject of intense investigation; the key question being how the proteinaceous environment controls the copper cofactor towards the activation of the O-O bond in O2 and cleavage of the glycosidic bonds in polysaccharides. The need for biochemical characterisation of each putative LPMO is discussed based on recent reports showing that not all proteins with a Cu-histidine brace are enzymes.
Subject(s)
Enzymes/physiology , Histidine/analogs & derivatives , Mixed Function Oxygenases/physiology , Organometallic Compounds/chemistry , Animals , Biotechnology/methods , Biotechnology/trends , Copper/chemistry , Enzymes/chemistry , Enzymes/metabolism , Glycoside Hydrolases/chemistry , Glycoside Hydrolases/physiology , Histidine/chemistry , Humans , Mixed Function Oxygenases/chemistry , Mixed Function Oxygenases/metabolism , Oxygen/metabolism , Polysaccharides/metabolism , Protein Conformation , Reactive Oxygen Species/metabolism , Substrate SpecificityABSTRACT
Lytic polysaccharide monooxygenase (LPMO) and copper binding protein CopC share a similar mononuclear copper site. This site is defined by an N-terminal histidine and a second internal histidine side chain in a configuration called the histidine brace. To understand better the determinants of reactivity, the biochemical and structural properties of a well-described cellulose-specific LPMO from Thermoascus aurantiacus (TaAA9A) is compared with that of CopC from Pseudomonas fluorescens (PfCopC) and with the LPMO-like protein Bim1 from Cryptococcus neoformans. PfCopC is not reduced by ascorbate but is a very strong Cu(II) chelator due to residues that interacts with the N-terminus. This first biochemical characterization of Bim1 shows that it is not redox active, but very sensitive to H2O2, which accelerates the release of Cu ions from the protein. TaAA9A oxidizes ascorbate at a rate similar to free copper but through a mechanism that produce fewer reactive oxygen species. These three biologically relevant examples emphasize the diversity in how the proteinaceous environment control reactivity of Cu with O2.
Subject(s)
Copper/metabolism , Histidine/metabolism , Models, Molecular , Oxygenases/metabolism , Escherichia coli , Hydrogen Peroxide/metabolism , Magnetic Resonance Spectroscopy/methods , Oxidation-ReductionABSTRACT
Infection by the fungal pathogen Cryptococcus neoformans causes lethal meningitis, primarily in immune-compromised individuals. Colonization of the brain by C. neoformans is dependent on copper (Cu) acquisition from the host, which drives critical virulence mechanisms. While C. neoformans Cu+ import and virulence are dependent on the Ctr1 and Ctr4 proteins, little is known concerning extracellular Cu ligands that participate in this process. We identified a C. neoformans gene, BIM1, that is strongly induced during Cu limitation and which encodes a protein related to lytic polysaccharide monooxygenases (LPMOs). Surprisingly, bim1 mutants are Cu deficient, and Bim1 function in Cu accumulation depends on Cu2+ coordination and cell-surface association via a glycophosphatidyl inositol anchor. Bim1 participates in Cu uptake in concert with Ctr1 and expression of this pathway drives brain colonization in mouse infection models. These studies demonstrate a role for LPMO-like proteins as a critical factor for Cu acquisition in fungal meningitis.
Subject(s)
Copper/metabolism , Cryptococcus neoformans/metabolism , Mixed Function Oxygenases/metabolism , Animals , Cryptococcosis/metabolism , Cryptococcus neoformans/pathogenicity , Disease Models, Animal , Female , Fungal Proteins/genetics , Fungal Proteins/metabolism , Meningitis/metabolism , Meningitis/physiopathology , Mice , Mice, Inbred A , Polysaccharides/metabolism , VirulenceABSTRACT
The limitations of fungal laccases at higher pH and salt concentrations have intensified the search for new extremophilic bacterial laccases. We report the cloning, expression, and characterization of the bacterial cotA from Bacillus clausii, a supposed alkalophilic ortholog of cotA from B. subtilis. Both laccases were expressed in E. coli strain BL21(DE3) and characterized fully in parallel for strict benchmarking. We report activity on ABTS, SGZ, DMP, caffeic acid, promazine, phenyl hydrazine, tannic acid, and bilirubin at variable pH. Whereas ABTS, promazine, and phenyl hydrazine activities vs. pH were similar, the activity of B. clausii cotA was shifted upwards by ~0.5-2 pH units for the simple phenolic substrates DMP, SGZ, and caffeic acid. This shift is not due to substrate affinity (K(M)) but to pH dependence of catalytic turnover: The k(cat) of B. clausii cotA was 1 s⻹ at pH 6 and 5 s⻹ at pH 8 in contrast to 6 s⻹ at pH 6 and 2 s⻹ at pH 8 for of B. subtilis cotA. Overall, k(cat)/K(M) was 10-fold higher for B. subtilis cotA at pH(opt). While both proteins were heat activated, activation increased with pH and was larger in cotA from B. clausii. NaCl inhibited activity at acidic pH, but not up to 500-700 mM NaCl in alkaline pH, a further advantage of the alkali regime in laccase applications. The B. clausii cotA had ~20 minutes half-life at 80°C, less than the ~50 minutes at 80°C for cotA from B. subtilis. While cotA from B. subtilis had optimal stability at pH~8, the cotA from B. clausii displayed higher combined salt- and alkali-resistance. This resistance is possibly caused by two substitutions (S427Q and V110E) that could repel anions to reduce anion-copper interactions at the expense of catalytic proficiency, a trade-off of potential relevance to laccase optimization.
Subject(s)
Alkalies/pharmacology , Bacillus/enzymology , Bacterial Proteins/metabolism , Escherichia coli/metabolism , Halogens/pharmacology , Laccase/metabolism , Bacillus/genetics , Enzyme Activation/drug effects , Enzyme Inhibitors/pharmacology , Enzyme Stability/drug effects , Escherichia coli/drug effects , Genes, Bacterial , Hydrogen-Ion Concentration , Kinetics , Laccase/antagonists & inhibitors , Models, Molecular , Pyrogallol/analogs & derivatives , Pyrogallol/metabolism , Sequence Homology, Amino Acid , Sodium Chloride/pharmacology , Temperature , Time FactorsABSTRACT
The unfolded state of globular proteins is not well described by a simple statistical coil due to residual structural features, such as secondary structure or transiently formed long-range contacts. The principle of minimal frustration predicts that the unfolded ensemble is biased toward productive regions in the conformational space determined by the native structure. Transient long-range contacts, both native-like and non-native-like, have previously been shown to be present in the unfolded state of the four-helix-bundle protein acyl co-enzyme binding protein (ACBP) as seen from both perturbations in nuclear magnetic resonance (NMR) chemical shifts and structural ensembles generated from NMR paramagnetic relaxation data. To study the nature of the contacts in detail, we used paramagnetic NMR relaxation enhancements, in combination with single-point mutations, to obtain distance constraints for the acid-unfolded ensemble of ACBP. We show that, even in the acid-unfolded state, long-range contacts are specific in nature and single-point mutations affect the free-energy landscape of the unfolded protein. Using this approach, we were able to map out concerted, interconnected, and productive long-range contacts. The correlation between the native-state stability and compactness of the denatured state provides further evidence for native-like contact formation in the denatured state. Overall, these results imply that, even in the earliest stages of folding, ACBP dynamics are governed by native-like contacts on a minimally frustrated energy landscape.
Subject(s)
Diazepam Binding Inhibitor/chemistry , Protein Folding , Animals , Cattle , Diazepam Binding Inhibitor/genetics , Diazepam Binding Inhibitor/metabolism , Models, Molecular , Nuclear Magnetic Resonance, Biomolecular , Point Mutation/genetics , Protein Conformation , Protein DenaturationABSTRACT
Secondary chemical shift analysis is the main NMR method for detection of transiently formed secondary structure in intrinsically disordered proteins. The quality of the secondary chemical shifts is dependent on an appropriate choice of random coil chemical shifts. We report random coil chemical shifts and sequence correction factors determined for a GGXGG peptide series following the approach of Schwarzinger et al. (J Am Chem Soc 123(13):2970-2978, 2001). The chemical shifts are determined at neutral pH in order to match the conditions of most studies of intrinsically disordered proteins. Temperature has a non-negligible effect on the (13)C random coil chemical shifts, so temperature coefficients are reported for the random coil chemical shifts to allow extrapolation to other temperatures. The pH dependence of the histidine random coil chemical shifts is investigated in a titration series, which allows the accurate random coil chemical shifts to be obtained at any pH. By correcting the random coil chemical shifts for the effects of temperature and pH, systematic biases of the secondary chemical shifts are minimized, which will improve the reliability of detection of transient secondary structure in disordered proteins.