Drug-Induced Dynamics of Bile Colloids.

Bile colloids containing taurocholate and lecithin are essential for the solubilization of hydrophobic molecules including poorly water-soluble drugs such as Perphenazine. We detail the impact of Perphenazine concentrations on taurocholate/lecithin colloids using analytical ultracentrifugation, dynamic light scattering, small-angle neutron scattering, nuclear magnetic resonance spectroscopy, coarse-grained molecular dynamics simulations, and isothermal titration calorimetry. Perphenazine impacted colloidal molecular arrangement, structure, and binding thermodynamics in a concentration-dependent manner. At low concentration, Perphenazine was integrated into stable and large taurocholate/lecithin colloids and close to lecithin. Integration of Perphenazine into these colloids was exothermic. At higher Perphenazine concentration, the taurocholate/lecithin colloids had an approximately 5-fold reduction in apparent hydrodynamic size, heat release was less exothermic upon drug integration into the colloids, and Perphenazine interacted with both lecithin and taurocholate. In addition, Perphenazine induced a morphological transition from vesicles to wormlike micelles as indicated by neutron scattering. Despite these surprising colloidal dynamics, these natural colloids successfully ensured stable relative amounts of free Perphenazine throughout the entire drug concentration range tested here. Future studies are required to further detail these findings both on a molecular structural basis and in terms of in vivo relevance.

Suitability of Different Natural and Synthetic Biomaterials for Dental Pulp Tissue Engineering.

Dental pulp tissue engineering is possible after insertion of pulpal stem cells combined with a scaffold into empty root canals. Commonly used biomaterials are collagen or poly(lactic) acid, which are either difficult to modify or to insert into such a narrow space. New hydrogel scaffolds with bioactive, specifically tailored functions could optimize the conditions for this approach. Different synthetic and natural hydrogels were tested for their suitability to engineer dental pulp. Two functionalized modifications of polyethylene glycol were developed in this study and compared to a self-assembling peptide, as well as to collagen and fibrin. Cell viability of dental pulp stem cells in test materials was assessed over two weeks. Cells in selected test materials laden with dentin-derived growth factors were inserted into human tooth roots and implanted subcutaneously into immunocompromised mice. In vitro cell culture exhibited distinct differences between scaffold types, where viability was significantly higher in natural compared to synthetic materials. In vivo experiments showed considerable differences regarding scaffold degradation, soft tissue formation, vascularization, and odontoblast-like cell differentiation. Fibrin appeared most suitable to enable generation of a pulp-like tissue and differentiation of cells into odontoblasts at the cell-dentin interface. In conclusion, natural materials, especially fibrin, proved to be superior compared to synthetic scaffolds regarding cell viability and dental pulp-like tissue formation.

Alkaline poly(ethylene glycol)-based hydrogels for a potential use as bioactive wound dressings.

The number of patients with chronic wounds is increasing constantly in today's aging society. However, little work is done so far tackling the associated disadvantageous shift of the wound pH. In our study, we developed two different approaches on pH-modulating wound dressing materials, namely, bioactive interpenetrating polymer network hydrogels based on poly(ethylene glycol) diacrylate/N-vinylimidazole/alginate (named VIx ) and poly(ethylene glycol) diacrylate/2-dimethylaminoethyl methacrylate/N-carboxyethylchitosan (named DMAEMAx ). Both formulations showed a good cytocompatibility and wound healing capacity in vitro. The developed dressing materials significantly increased the cell ingrowth in wounded human skin constructs; by 364% and 313% for the VIx and the DMAEMAx hydrogel formulation, respectively. Additionally, VIx hydrogels were found to be suitable scaffolds for superficial cell attachment. Our research on the material properties suggests that ionic interactions and hydrogen bonds are the driving forces for the mechanical and swelling properties of the examined hydrogels. High amounts of positively charged amino groups in DMAEMAx hydrogels caused increased liquid uptake (around 190%), whereas VIx hydrogels showed a 10-fold higher maximum compressive stress in comparison to hydrogels without ionizable functional groups. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3360-3368, 2017.

Controlled Antibody Release from Degradable Thermoresponsive Hydrogels Cross-Linked by Diels-Alder Chemistry.

Amine-modified four- and eight-armed poloxamines were prepared and subsequently functionalized with maleimide or furyl groups. Aqueous solutions of these polymers exhibited an immediate gelation at a temperature above 37 °C. Concomitantly, Diels-Alder reactions gradually cross-linked and cured the gels. Different ratios between four- and eight-armed macromonomers were used to tune hydrogel stability and mechanical properties. In this way, hydrogel stability could be precisely controlled in the range of 14 to 329 days. Controlled release of the model antibody bevacizumab was achieved over a period of 7, 21, and 115 days. Release profiles were triphasic with a low burst; approximately 87% of the released antibody was intact and displayed functional binding. The hydrogels presented in this study are degradable, nontoxic, rapidly gelling, stable, and provide controlled antibody release. They can be tailored to match the demands of various applications and present an attractive platform for antibody delivery.

pH-Modulating Poly(ethylene glycol)/Alginate Hydrogel Dressings for the Treatment of Chronic Wounds.

The development of chronic wounds has been frequently associated with alkaline pH values. The application of pH-modulating wound dressings can, therefore, be a promising treatment option to promote normal wound healing. This study reports on the development and characterization of acidic hydrogel dressings based on interpenetrating poly(ethylene glycol) diacrylate/acrylic acid/alginate networks. The incorporation of ionizable carboxylic acid groups results in high liquid uptake up to 500%. The combination of two separate polymer networks significantly improves the tensile and compressive stability. In a 2D cell migration assay, the application of hydrogels (0% to 1.5% acrylic acid) results in complete "wound" closure; hydrogels with 0.25% acrylic acid significantly increase the cell migration velocity to 19.8 ± 1.9 µm h-1 . The most promising formulation (hydrogels with 0.25% acrylic acid) is tested on 3D human skin constructs, increasing keratinocyte ingrowth into the wound by 164%.

Polyanions effectively prevent protein conjugation and activity loss during hydrogel cross-linking.

In situ encapsulation is a frequently used method to prepare hydrogels loaded with high quantities of therapeutic proteins. However, many cross-linking reactions, such as Michael-type addition or Diels-Alder (DA) reaction are not tolerant toward nucleophiles; therefore, side-reactions with proteins can occur during cross-linking. This may lead to undesired protein conjugation, activity loss and incomplete protein release. In this study, a number of polyanions, namely alginate, dextran sulfate, hyaluronic acid, heparin, and poly(acrylic acid), were screened for their capability to protect proteins during covalent cross-linking. To this end, lysozyme was incubated with furyl- and maleimide-substituted methoxy poly(ethylene glycol); different pH values were tested. The degree of PEGylation and the residual activity of lysozyme were investigated. Without polyanions, 61.1% of the total lysozyme amount was PEGylated at pH7.4; the residual activity was 20.3% of the initial activity. With the most effective polyanion (dextran sulfate), PEGylation could be completely suppressed; the residual activity was 98.4%. The protective effect of polyanions was attributed to electrostatic interactions with proteins; the "shielding" could be reversed by adding high salt concentrations. Furthermore, the protective effect was dependent on the concentration and molecular mass of the polyanion, but almost independent of the protein concentration. As a proof of concept, hydrogels were loaded with lysozyme and bevacizumab during cross-linking via DA reaction. Without polyanions, a large fraction of the protein was covalently bound to the polymer network resulting in degradation-controlled release; the residual activity of lysozyme was 50.0%. With polyanions, the protein molecules were mobile and their release was diffusion-controlled. The residual activity of lysozyme was 88.9%; the released bevacizumab was structurally intact. Polyanions can, therefore, be used as protective additive to prevent chemical protein modification during hydrogel cross-linking.

Design of hydrogels for delayed antibody release utilizing hydrophobic association and Diels-Alder chemistry in tandem.

Biodegradable hydrogels were prepared from furan- and maleimide-functionalized eight-armed poly(ethylene glycol) with an average molecular mass of 40 000 Da (8armPEG40k-furan and 8armPEG40k-maleimide) using the Diels-Alder (DA) reaction as a cross-linking mechanism. Hydrophobic 6-aminohexanoic acid (C6) and 12-aminododecanoic acid (C12) spacers were introduced between the polymer backbone and the functional end-groups; the influence on the gel properties was studied. Modification with C6 and C12 spacers induced hydrophobic interactions between the macromonomers leading to association and increased viscosity of the polymer solutions; both effects were influenced by the spacer length. In combination with DA cross-linking, hydrophobic derivatives of 8armPEG40k-furan and 8armPEG40k-maleimide led to hydrogels with improved properties. Upon introduction of C12 spacers, gelation of 8armPEG40k hydrogels occurred twice as fast. Interestingly, no effect was observed when only one of the two components had been modified. Our experiments suggest that the association of macromonomers by hydrophobic interactions facilitates chemical cross-linking via DA chemistry. This hypothesis is supported by calculations of the network mesh size and the Young's modulus of compression, which showed an increased cross-linking density of hydrophobically modified hydrogels. As a consequence of the increased cross-linking density, the degradation stability of C12-modified hydrogels increased by a factor of 4. Moreover, hydrophobic modification improved the hydrolytic resistance of maleimides; this also contributes to gel stability. The in vitro release of bevacizumab, which served as a model antibody, could be delayed for almost 60 days using modification with C12. Similar trends were observed for C6-modified 8armPEG40k hydrogels; however, the effects were considerably weaker. In summary, utilizing hydrophobic association and chemical cross-linking in tandem is a promising approach to create biodegradable hydrogels for delayed antibody release.

The Diels-Alder reaction: A powerful tool for the design of drug delivery systems and biomaterials.

Click reactions have the potential to greatly facilitate the development of drug delivery systems and biomaterials. These reactions proceed under mild conditions, give high yields, and form only inoffensive by-products. The Diels-Alder cycloaddition is one of the click reactions that do not require any metal catalyst; it is one of the most useful reactions in synthetic organic chemistry and material design. Herein, we highlight possible applications of the Diels-Alder reaction in pharmaceutics and biomedical engineering. Particular focus is placed on the synthesis of polymers and dendrimers for drug delivery, the preparation of functionalized surfaces, bioconjugation techniques, and applications of the Diels-Alder reaction in nanotechnology. Moreover, applications of the reaction for the preparation of hydrogels for drug delivery and tissue engineering are reviewed. A general introduction to the Diels-Alder reaction is presented, along with a discussion of potential pitfalls and challenges. At the end of the article, we provide a set of tools that may facilitate the application of the Diels-Alder reaction to solve important pharmaceutical or biomedical problems.

Diels-Alder Hydrogels for Controlled Antibody Release: Correlation between Mesh Size and Release Rate.

Eight-armed PEG, molecular mass 10 kDa, was functionalized with furyl and maleimide groups, respectively; the obtained macromonomers were cross-linked via Diels-Alder chemistry. The mesh size (ξ) of the prepared hydrogels was determined by swelling studies, rheology, and low field NMR spectroscopy. The in vitro release of fluorescein isothiocyanate labeled dextrans (FDs) and bevacizumab was investigated. The average mesh size (ξavg) increased from 5.8 ± 0.1 nm to 56 ± 13 nm during degradation, as determined by swelling studies. The result of the rheological measurements (8.0 nm) matched the initial value of ξavg. Low field NMR spectroscopy enabled the determination of the mesh size distribution; the most abundant mesh size was found to be 9.2 nm. In combination with the hydrodynamic radius of the molecule (Rh), the time-dependent increase of ξavg was used to predict the release profiles of incorporated FDs applying an obstruction-scaling model. The predicted release profiles matched the experimentally determined release profiles when Rh < ξavg. However, significant deviations from the theoretical predictions were observed when Rh ≥ ξavg, most likely due to the statistical distribution of ξ in real polymer networks. The release profile of bevacizumab differed from those of equivalently sized FDs. The delayed release of bevacizumab was most likely a result of the globular structure and rigidity of the protein. The observed correlation between ξ and the release rate could facilitate the design of controlled release systems for antibodies.

Diels-Alder hydrogels with enhanced stability: First step toward controlled release of bevacizumab.

Eight-armed PEG was functionalized with furyl and maleimide groups (8armPEG20k-Fur and 8armPEG20k-Mal); degradable hydrogels were obtained by cross-linking via Diels-Alder chemistry. To increase the stability to degradation, the macromonomers were modified by introducing a hydrophobic 6-aminohexanoic acid spacer between PEG and the reactive end-groups (8armPEG20k-Ahx-Fur and 8armPEG20k-Ahx-Mal). In an alternative approach, the number of reactive groups per macromonomer was increased by branching the terminal ends of eight-armed PEG with lysine (Lys) and Ahx residues (8armPEG20k-Lys-Ahx-Fur2 and 8armPEG20k-Lys-Ahx-Mal2). The hydrolytic resistance of the synthesized macromonomers was determined by UV spectroscopy; the obtained hydrogels were characterized by rheology and degradation studies. The degradation time of 5% (w/v) 8armPEG20k-Ahx hydrogels (28days) was twice as long as the degradation time of 5% (w/v) 8armPEG20k hydrogels (14days); this is explained by increased hydrolytic resistance of the maleimide group. Using dendritic 8armPEG20k-Lys-Ahx macromonomers substantially increased the stability of the resulting hydrogels; degradation of 5% (w/v) 8armPEG20k-Lys-Ahx hydrogels occurred after 34 weeks. 8armPEG20k hydrogels had the largest mesh size of all tested hydrogels, while hydrogels made from dendritic 8armPEG20k-Lys-Ahx macromonomers showed the smallest value. To evaluate their potential for the controlled release of therapeutic antibodies, the hydrogels were loaded with bevacizumab. The incorporated bevacizumab was released over 10 days (8armPEG20k) and 42days (8armPEG20k-Ahx), respectively; release from 8armPEG20k-Lys-Ahx hydrogels was not completed after 105 days. In summary, we believe that 8armPEG20k-Ahx or 8armPEG20k-Lys-Ahx hydrogels could serve as controlled release system for therapeutic antibodies such as bevacizumab.

Hydrogels in ophthalmic applications.

More and more people worldwide are affected by severe eye diseases eventually leading to visual impairment or blindness. In most cases, the treatment involves the application of ophthalmic dosage forms such as eye drops, suspensions or ointments. Unfortunately, some of the therapeutic approaches have major shortcomings, especially in the treatment of the posterior segment of the eye, where many vision-threatening diseases originate. Therefore, research focuses on the development of new materials (e.g., for vitreous substitution) and more advanced drug delivery systems. Hydrogels are an extremely versatile class of materials with many potential applications in ophthalmology. They found widespread application as soft contact lenses, foldable intraocular lenses, in situ gelling formulations for ophthalmic drug delivery and ocular adhesives for wound repair; their use as vitreous substitutes and intravitreal drug delivery systems is currently under investigation. In this article, we review the different applications of hydrogels in ophthalmology with special emphasis placed on the used polymers and their suitability as ocular drug delivery systems.

Protein compatibility of selected cross-linking reactions for hydrogels.

The compatibility of selected cross-linking reactions with lysozyme is investigated. Michael-type additions of nucleophilic amino acids to maleimide, vinyl sulfone and acrylamide groups are detected by gel electrophoresis. The degree of modification depends on the polymer and the pH. Complete modification with more than five PEG chains is observed after incubation with mPEG5k-vinyl sulfone at pH 9, whereas 96% of the protein remains unmodified after incubation with mPEG5k-acrylamide at pH 4. Incubation with mPEG5k-thiol results in thiol-disulfide exchange reactions. Hydrogel preparation is simulated by using polymer mixtures. Protein modifications are detected, which may affect the protein structure, decrease activity and bioavailability, and increase the risk for immune responses.

New insights into the cross-linking and degradation mechanism of Diels-Alder hydrogels.

Eight-armed poly(ethylene glycol) was functionalized with furyl and maleimide groups. The two macromonomers were cross-linked by Diels-Alder (DA) reactions and the degradation behavior of the formed hydrogels was investigated. UV spectroscopy showed that maleimide groups were subject to ring-opening hydrolysis above pH 5.5, with the reaction rate depending on the pH and temperature. As a result of this, the gelation kinetics and stiffness of DA hydrogels were dependent on the temperature and the pH of the cross-linking medium, as demonstrated by rheological experiments. The gel time varied between 87.8 min (pH 3.0, 37 °C) and 374.7 min (pH 7.4, 20 °C). Values between 420 Pa (pH 9.0, 37 °C) and 3327 Pa (pH 3.0, 37 °C) were measured for the absolute value of the complex shear modulus. Hydrogel swelling and degradation were influenced by the same parameters. With increasing pH and temperature the degradation time was reduced from 98 days (pH 7.4, 20 °C) to 2 days (pH 7.4, 50 °C); no degradation was observed at pH 3.0 and 5.5. Molecular modeling studies of the DA and retro-Diels-Alder (rDA) moieties revealed that hydrogel degradation occurred by rDA reaction followed by OH--catalyzed ring-opening hydrolysis of maleimide groups to unreactive maleamic acid derivatives.

Cleavable carbamate linkers for controlled protein delivery from hydrogels.

The reversible attachment of proteins to polymers is one potential strategy to control protein release from hydrogels. In this study, we report the reversible attachment of lysozyme to poly(ethylene glycol) (PEG) by degradable carbamate linkers. Phenyl groups with different substituents were used to control the rate of carbamate hydrolysis and the resulting protein release. Sodium dodecyl sulfate polyacrylamide gel electrophoresis showed modification with 1-3 PEG chains per lysozyme molecule. Protein PEGylation and PEG chain elimination occurred without changes in secondary protein structure, as demonstrated by circular dichroism spectroscopy. The lytic activity of lysozyme was restored to 73.4±1.7%-92.5±1.2% during PEG chain elimination. Attached PEG chains were eliminated within 24h to 28days, depending on the used linker molecule. When formulated into hydrogels, a maximum of about 60% of the initial dose was released within 7days to 21days. Linker elimination occurs 'traceless', so that the protein is released in its native, unmodified form. Altogether, we believe that tethering proteins by degradable carbamate linkers is a promising strategy to control their release from hydrogels.

Investigation of the Diels-Alder reaction as a cross-linking mechanism for degradable poly(ethylene glycol) based hydrogels.

The Diels-Alder (DA) reaction was investigated as a cross-linking mechanism for poly(ethylene glycol) (PEG) based hydrogels. Two complementary macromonomers were synthesized by functionalizing star-shaped PEG with furyl and maleimide groups. Gel formation occurred in water at 37 °C; the gelation time ranged between 171 ± 25 min and 14 ± 1 min depending on the used hydrogel formulation. The complex shear modulus was dependent on the concentration, branching factor and molecular weight of the macromonomers; values between 2821 ± 1479 Pa and 37097 ± 6698 Pa were observed. Hydrogel swelling and degradation were influenced by the same parameters; the degradation time varied between a few days and several weeks. Gel dissolution was found to occur by retro-DA reaction and subsequent hydrolysis of maleimide groups. Calculations of the network mesh size revealed that the prepared hydrogels would be suitable for the controlled release of therapeutic proteins.

Enzymatically degradable poly(ethylene glycol) based hydrogels for adipose tissue engineering.

Adipose tissue engineering requires biomaterials that promote the differentiation of seeded adipocytes. Here, we report on the development and characterization of in situ forming, poly(ethylene glycol) (PEG) based hydrogels for soft tissue augmentation. Branched PEG-amines were modified with collagenase-sensitive peptides and cross-linked with branched PEG-succinimidyl propionates without the use of free-radical initiators (enzymatically degradable hydrogels). Alanine-modified PEG-amines were used for the preparation of non-degradable gels. Depending on the used polymer concentration, the strength of degradable gels after swelling ranged from 1708 to 7412 Pa; the strength of non-degradable hydrogels varied between 1496 and 7686 Pa. Enzyme mediated gel degradation occurred within 10, 16, and 19 days (5%, 10%, and 15% initial polymer content). To evaluate their suitability as scaffold materials for adipose tissue engineering, the hydrogels were functionalized with the laminin-derived adhesion peptide YIGSR, and seeded with 3T3-L1 preadipocytes. Compared to a standard two-dimensional cell culture model, the developed hydrogels significantly enhanced the intracellular triglyceride accumulation of encapsulated adipocytes. Functionalization with YIGSR further enhanced lipid synthesis within differentiating adipocytes. Long-term studies suggested that enzymatically degradable hydrogels furthermore promote the formation of coherent adipose tissue-like structures featuring many mature unilocular fat cells.