Anterior vertebral tethering: imaging of tether rupture.

Anterior vertebral tethering, also known as vertebral body tethering, is an evolving, minimally invasive surgical technique to correct spinal curvature in skeletally immature patients. The procedure involves placement of vertebral screws that are connected by an anterolateral tether. This procedure may be complicated by rupture of the non-radiopaque tether. The radiologist should be aware of imaging findings that suggest this complication on follow-up spine radiographs.

A Thoracoscopic Technique Used in Anterior Vertebral Tethering for Adolescent Idiopathic Scoliosis.

Anterior vertebral tethering (AVT) is a relatively recent alternative to posterior spinal fusion for progressive curves in growing patients with idiopathic scoliosis. AVT uses a thoracoscopic approach to minimize trauma to the thoracic wall and chest cavity. There are limited technical descriptions of this method. Patients benefit from proficiency and reproducibility to allow for appropriate spinal curve correction over time. This Technical Note outlines the steps of the thoracoscopic approach to AVT and reviews the current indications for AVT over posterior spinal fusion, as well as the most recently published clinical outcomes of this procedure.

Characterizing Anesthetic Management and Perioperative Outcomes Associated with a Novel, Fusionless Scoliosis Surgery in Adolescents.

Anterior vertebral tethering (AVT) is a novel "fusionless" surgical approach to correct scoliosis. This study aims to characterize the anesthetic management and perioperative outcomes of AVT and traditional posterior spinal fusion (PSF) after establishing the technique at our institution. Scoliosis correction procedures performed in patients aged 10 to 21 years between January 2014 and August 2017 were identified in the electronic medical record. Patient characteristics and perioperative data about anesthetic use and pain management were extracted. Descriptive statistics were generated. Thirty-five patients undergoing AVT and 40 patients undergoing PSF met inclusion criteria. Preoperative fluoroscopy-guided epidural placement was used only in the AVT group (86%). The worst pain score on postoperative day (POD) 1 after AVT was a mean (SD) of 5.6 (2.3), with average pain scores on subsequent days ranging from 2.9 (1.2) to 3.6 (1.7). Total in-hospital opioid consumption in morphine milligram equivalents was 70 (76.6) for AVT and 193.4 (137.2) for PSF (P < .01). Discharge occurred on POD 4.4 (1.4) for AVT and POD 6.2 (1.9) for PSF (P < .01). The worst pain score on POD 1 for PSF was 6.6 (2.1), and average pain scores ranged from 3.7 (1.8) to 4.2 (1.8). These results help inform about the expected recovery profile and narcotic requirement after AVT and PSF.

Primary paraganglioma of the parathyroid: a case report and clinicopathologic review.

Paragangliomas are relatively uncommon neoplasms that arise in adrenal and extra-adrenal paraganglia of the autonomic nervous system. Parasympathetic paraganglioma develop predominantly in the head and neck. It is exceedingly uncommon to develop a primary intraparathyroid paraganglioma. There is only a single case report in the English literature. The information from the single previous case report (Medline 1960-2009) was combined with this case report. Our patient was a 69 year old woman who presented with a thyroid gland mass, with extension into the substernal space. The patient had a history of renal cell carcinoma removed 18 months before. At surgery, a thyroid lobectomy and a parathyroidectomy were performed. The parathyroid tissue showed a very well defined zellballen arrangement of paraganglion cells within the parenchyma of the parathyroid gland. The cells had ample basophilic, granular cytoplasm. The nuclei were generally round to oval with 'salt-and-pepper' nuclear chromatin distribution. There was a richly vascularized stroma. Mitotic figures, necrosis, invasive growth, and profound nuclear pleomorphism were absent. The neoplastic cells were strongly and diffusely immunoreactive with chromogranin, synaptophysin, CD56, and focally with cyclin-D1. The paraganglioma showed a delicate S-100 protein positive supporting sustentacular framework. Keratin, CD10, PTH, calcitonin and RCC markers were negative. The patient showed no stigmata of Multiple Endocrine Neoplasia (MEN) and has no paraganglioma in any other anatomic site. She is alive without any additional findings 12 months after surgery. Isolated paraganglioma within the parathyroid is rare, and should be separated from parathyroid adenoma, hyperplasia or metastatic disease to assure appropriate management.

The effect of two clinically relevant fusionless scoliosis implant strategies on the health of the intervertebral disc: analysis in an immature goat model.

STUDY DESIGN: Immature goat spines were instrumented at 5 levels with 2 different fusionless scoliosis implants. Instrumented and subadjacent spinal segments were analyzed to determine the effect on the disc and endplate. OBJECTIVE: Analyze the regional biochemistry and histology of spinal motion segments in healthy goat spines treated with 2 clinically relevant, fusionless scoliosis implants. SUMMARY OF BACKGROUND DATA: Fusionless scoliosis surgery is thought to be more physiologic than fusion as it preserves the growth, motion, and function of the spine. There are presently little data supporting this belief. METHODS: Scoliosis was created in twelve 8-week-old female goats (n = 6 per group) using 1 of 2 fusionless scoliosis implant strategies: 2 SMA staples per level or a bone anchor/ligament tether. A third group served as controls (n = 6). Goats were analyzed after 6 months. Qualitative and quantitative analyses were performed on spinal motion segments using H&E, TUNEL, and caspase-3 staining. RESULTS: Neither implant strategy produced degenerative changes in the disc. However, discs at instrumented levels in both groups demonstrated decreased cell density (P < 0.01) and increased cellular apoptosis (P < 0.001) compared to controls. Subadjacent discs demonstrated preservation of viable cells and endplate vascularity compared to instrumented discs. CONCLUSION: Fusionless scoliosis implants result in alterations in viable cell density within the disc and reduced vascularity in the vertebral endplates of instrumented but not subadjacent discs. Though obvious disc degeneration was not observed, the implications of the cellular and histologic changes are not known. Additional study will be necessary to better understand various fusionless scoliosis surgery strategies and their effect on surrounding tissues.

Static versus dynamic loading in the mechanical modulation of vertebral growth.

STUDY DESIGN: Measures of absolute and relative growth modulation were used to determine the effects of static and dynamic asymmetric loading of vertebrae in the rat tail. OBJECTIVES: To quantify the differences between static and dynamic asymmetric loading in vertebral bone growth modulation. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities have been previously described in a rat-tail model using static loading. The effects of dynamic loading on growth modulation in the spine have not been characterized. METHODS: A total of 36 immature Sprague-Dawley rats were divided among four different groups: static loading (n = 12, 0.0 Hz), dynamic loading (n = 12, 1.0 Hz), sham operated (n = 6), and growth controls (n = 6). An external fixator was placed across the sixth and eighth caudal vertebrae as the unviolated seventh caudal vertebra was evaluated for growth modulation. Static or dynamic asymmetric loads were applied at a loading magnitude of 55% body weight. After 3 weeks of loading, growth modulation was assessed using radiographic measurements of vertebral wedge angles and vertebral body heights. RESULTS: The dynamically loaded rats had a final average wedge deformity of 15.2+/- 6.4 degrees, which was significantly greater than the statically loaded rats whose final deformity averaged 10.3 degrees +/- 3.7 degrees (P < 0.03). The deformity in both groups was statistically greater than the sham-operated (1.1+/- 2.0 degrees) and growth control rats (0.0+/- 1.0 degrees) (P < 0.001). The longitudinal growth was significantly lower on the concavity compared with the convexity in both the dynamically (0.34 +/- 0.23 mm vs. 0.86 +/- 0.23 mm) and statically (0.46 +/- 0.19 mm vs. 0.83 +/- 0.32 mm) loaded rats (P < 0.001). These growth rates were significantly less than the sham operated and growth control rats (P < 0.001). CONCLUSIONS: A variety of fusionless scoliosis implant strategies have been proposed that use both rigid and flexible implants to modulate vertebral bone growth. The results from this study demonstrate that dynamic loading of the vertebrae provides the greatest growth modulation potential.

Relative versus absolute modulation of growth in the fusionless treatment of experimental scoliosis.

STUDY DESIGN: Absolute and relative growth modulation of apical spinal segments were measured during creation and correction of an experimental scoliosis in a goat model. OBJECTIVE: To differentiate relative and absolute changes in growth on the concavity and convexity of an experimental scoliosis treated with anterior vertebral stapling. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities have been previously described in a rat tail model using external fixation as well as in a goat model using anterior vertebral body stapling. METHODS: Progressive, structural, scoliotic curves convex to the right in the thoracic spine were created in 14 Spanish Cross-X female goats using a posterior asymmetric tether. After 7-13 weeks, all tethers were removed, and goats were randomized into stapled (n = 8) and untreated (n = 6) groups. Stapled goats underwent anterior vertebral stapling with 4 shape memory alloy staples (Medtronic Sofamor Danek, Memphis, TN) along the convexity of the maximal curvature. All goats were observed for an additional 7-13 weeks. There were 12 additional goats matched for age, sex, and weight used as growth controls throughout the study. Serial radiographs were used to document progression or correction of the maximal scoliotic deformity, and changes in relative and absolute growth at the apical spinal segment T9-10 (2 adjacent vertebrae and the intervening disc). RESULTS: All tethered goats had progressive, structural, scoliotic curves of significant magnitude during the tethering period (average 61.4 degrees, range 49 degrees to 73 degrees) (P = 0.001). There was 1 goat from each group eliminated from the study because its apical spinal segment did not match the T9-10 level used to establish normal growth in controls. During the treatment period, stapled goats had a correction of -6.9 degrees (P = 0.03), whereas untreated goats had little change (-1.4 degrees). Apical spinal segment wedging progressed in all tethered goats, from 11.1 degrees to 22.4 degrees, during the tethering period (P = 0.001). During the treatment period, wedging corrected -2.2 degrees (range 22.5 degrees to 20.3 degrees) in the stapled goats but progressed +3.5 degrees (range 22.3 degrees to 25.8 degrees) in the untreated goats (P < 0.05). Apical spinal segment growth in all tethered goats was decreased on the concavity by 78% and increased on the convexity by 33% when compared to growth controls (P < 0.001). During the treatment period, growth on the concavity of the apical spinal segment of the stapled goats was decreased by 10% but increased in the untreated goats by 37% when compared to growth controls. On the convexity, apical spinal segment growth at T9-10 was decreased in the stapled goats by 18% and increased in the untreated goats by 29% when compared to growth controls (P < 0.04). CONCLUSIONS: Data in this study show the ability to modulate relative and absolute growth, according to the Hueter-Volkmann law, at the apical spinal segment of a progressive experimental scoliosis. However, anterior vertebral stapling, although able to control progressive wedging and scoliosis at the apical spinal segment, was not able to reverse fully the Hueter-Volkmann effect.

Anterior cervical fixation: analysis of load-sharing and stability with use of static and dynamic plates.

BACKGROUND: Anterior plates provide stability following decompression and fusion of the cervical spine. Various plate designs have emerged, and they include static plates with fixed-angle screws, rotationally dynamic plates that allow the screws to toggle in the plate, and translationally dynamic plates that allow the screws to both toggle and translate vertically. The goal of this study was to document the effects of plate design following a single-level corpectomy and placement of a full-length strut graft and the effects following 10% subsidence of the graft. METHODS: A total of twenty-one cadaveric cervical spines (C2-T1) were randomized into three treatment groups and were tested for initial range of motion. A C5 corpectomy was performed, reconstruction was done with a full-length interbody spacer containing a load-cell, and an anterior cervical plate was applied. Load-sharing data were recorded with incremental axial loads. The range of motion was measured with +/- 2.5 Nm of torque in flexion-extension, lateral bending, and axial rotation. Then, the total length of the interbody spacer was reduced by 10% to simulate subsidence, and load-sharing and the range of motion were retested. RESULTS: With the full-length interbody spacer, there were no significant differences in the abilities of the constructs to share load or limit motion. Following shortening of the interbody spacer, the static plate construct lost nearly 70% of its load-sharing capability, while neither of the dynamic plate constructs lost load-sharing capabilities. Also, the static plate construct allowed significantly more motion in flexion-extension following simulated subsidence than did either of the dynamic plate constructs (p < 0.05). CONCLUSIONS: Although all of the tested anterior cervical plating systems provide similar load-sharing and stiffness following initial placement of the interbody spacer, the static plate system lost its ability to share load and limit motion following simulated subsidence of the interbody spacer. Both dynamic plate systems maintained load-sharing and stiffness despite simulated subsidence. CLINICAL RELEVANCE: This study provides an improved understanding of the immediate performance of anterior cervical fusion surgery with plate fixation.

Creation of an experimental idiopathic-type scoliosis in an immature goat model using a flexible posterior asymmetric tether.

STUDY DESIGN: Longitudinal follow-up of animals after a surgically initiated scoliosis. OBJECTIVE: To create a progressive, structural, idiopathic-type, lordoscoliotic curve convex to the right in the thoracic spine of the immature goat using a flexible posterior asymmetric tether with minimal disruption of the spinal elements along the curve. SUMMARY OF BACKGROUND DATA: Our previous work created an experimental scoliosis model using a rigid posterior asymmetric tether to study the safety and efficacy of fusionless scoliosis treatments. Posterior asymmetric tethers, whether rigid or flexible, represent the most reliable method of creating an experimental deformity that approximates idiopathic scoliosis. Although our initial rigid model was unique in creating progressive structural scolioses without violation of the essential spinal elements along the curve, there were a number of shortcomings associated with the model. These included substantially stiff curves and unpredictability of curve progression. METHODS: Scoliosis was created in 24 Spanish Cross X female goats (age, 6-8 weeks; weight, 8-12 kg) using a braided synthetic ligament as a left posterior asymmetric tether from T5 to L1. Convex rib resection and concave rib tethering from ribs 8 to 13 were performed without disruption of the spinal elements before tensioning of the posterior tether. All goats were followed over an 8-week period with serial radiographs to document progression of the deformity. At the end of 8 weeks, the 20 goats with progressive curves were randomized into treatment groups for a separate study. However, 6 of these 20 remained untreated in the subsequent study and, therefore, were followed for an additional 12 to 16 weeks. RESULTS: There were two deaths in the early postoperative period due to pulmonary complications. Of the remaining 22 goats, 20 (91%) developed progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine. Initial scoliosis after tethering measured 55.4 degrees on average (range, 37 degrees-75 degrees) and progressed to 74.4 degrees on average (range, 42 degrees-93 degrees) over 8 weeks. The average progression of 19.0 degrees (range, 5 degrees-33 degrees) was statistically significant (P < 0.001). The average initial lordosis after tethering measured -18.9 degrees (range, -13 degrees to -27 degrees) and progressed to -40.7 degrees on average (range, -28 degrees to -56 degrees) over 8 weeks. The average progression in lordosis of -21.8 degrees (range, -5 degrees to -43 degrees) was significant (P < 0.001). CONCLUSIONS: This study demonstrated the effectiveness of a flexible posterior asymmetric tether in creating idiopathic-type deformities in a shorter tethering period than previously described. With substantial remaining spinal growth after the 8-week tethering period and preservation of the essential spinal elements in an undisturbed state, this model is suitable for the study of scoliosis progression and various fusionless scoliosis treatment methods.

Mechanical modulation of vertebral growth in the fusionless treatment of progressive scoliosis in an experimental model.

STUDY DESIGN: Wedging of apical spinal segments was measured during creation and correction of an experimental scoliosis in a goat model. OBJECTIVES: To create and correct apical vertebral wedge deformities in a progressive experimental scoliosis model by purely mechanical means. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities has been previously described in a rat tail model using external fixation. METHODS: Experimental scoliosis was created in 14 goats using a posterior asymmetric tether with convex rib resection and concave rib tethering. After a period of up to 13 weeks, all tethers were removed and goats were randomized into treated (n = 8) and untreated (n = 6) groups. Treated goats underwent anterior thoracic stapling with four shape memory alloy staples along the convexity of the maximal curvature. Goats were followed for an additional 7 to 13 weeks during treatment. Serial radiographs were used to document progression or correction of the maximal scoliotic deformity as well as to measure the wedging of the apical spinal segment (two adjacent vertebrae and the intervening disc). RESULTS: During the tethering period, all goats achieved a progressive, structural, lordoscoliotic curve of significant magnitude (mean: 61 degrees, range: 49 to 73 degrees). Wedging of the apical spinal segment measured 11.1 degrees at the beginning and 22.4 degrees at the end of the tethering period. The increase in apical spinal segment wedging of +11.3 degrees (10.7 degrees vertebral/0.6-degree disc) was significant (P = 0.001). During the treatment period, the scoliosis in the stapled goats measured 56.8 degrees at the beginning and 43.4 degrees at the end for an average correction of -13.4 degrees (range: 0 to-22 degrees) (P = 0.001), whereas the untreated goats measured 67.0 degrees at the beginning and 59.8 degrees at the end for an average correction of -7.2 degrees (range: +7 to -21 degrees) (P = 0.19). Additionally, wedging of the apical spinal segment in the stapled goats measured 22.5 degrees at the beginning and 20.3 degrees at the end for an average correction of -2.2 degrees (-0.6 degrees vertebral/-1.6-degree disc); wedging of the apical vertebral segment in the untreated goats measured 22.3 degrees at the beginning and 25.8 degrees at the end of the treatment period for an average progression of +3.5 degrees (3.5 degrees vertebral/0.0-degree disc). The difference in apical spinal segment correction versus progression in the stapled (-2.2 degrees) versus control (+3.5 degrees) goats was significant (P < 0.05). CONCLUSIONS: This study demonstrates the ability to create wedge deformities at the apex of an experimental scoliosis in a large animal model and to control the progression of these deformities using anterior thoracic staples.

Three-dimensional analysis of 2 fusionless scoliosis treatments: a flexible ligament tether versus a rigid-shape memory alloy staple.

STUDY DESIGN: Experimental scoliosis was created and subsequently corrected in goats. The 3-dimensional (3-D) effects of the treatments were analyzed. OBJECTIVE: To analyze the 3-D effect of 2 different fusionless scoliosis treatment techniques on an experimental idiopathic-type scoliosis using plain radiographs and computerized tomography. SUMMARY OF BACKGROUND DATA: Scoliosis is a complex 3-D spinal deformity with limited treatment options. By preserving growth, motion, and function of the spine, fusionless scoliosis surgery provides theoretical advantages over current forms of treatment. METHODS: Scoliosis was created in 24 Spanish cross-X female goats using a flexible, left posterior asymmetric tether from the T5 to L1 laminae, with convex rib resection and concave rib tethering from T8 to T13. After 8 weeks of posterior tethering, goats were randomized into 3 treatment groups: group 1, no treatment; group 2, anterior-shape memory alloy staple; and group 3, anterior ligament tether with bone anchor. The 6 levels of maximal curvature were instrumented in groups 2 and 3. All goats were observed for an additional 12-16 weeks. Serial radiographs and computerized tomography were used to document progression/correction of coronal, sagittal, and transverse plane deformities throughout the study. RESULTS: There were 20 goats that had progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine over the 8-week tethering period. An overall deformity score equaling the sum of the scoliosis, lordosis, and axial rotation measurements was calculated for each goat at 3 times. CONCLUSION: The data in this study show the ability of a ligament tether attached to a bone anchor to correct scoliosis modestly in the coronal plane, but not in the sagittal or transverse plane. In addition, although a significant decrease in the deformity score was shown initially in this group (P < 0.001), the effect was lost over time. The final deformity in the bone anchor/ligament tether group wassignificantly less than either the stapled or untreated groups (P < 0.03). Further study is warranted to provide a better understanding of the 3-D effects of fusionless scoliosis treatments.

Less invasive posterior fixation method following transforaminal lumbar interbody fusion: a biomechanical analysis.

BACKGROUND CONTEXT: Current surgical trends increasingly emphasize the minimization of surgical exposure and tissue morbidity. Previous research questioned the ability of unilateral pedicle screw instrumentation to adequately stabilize posterior fusion constructs. No study to date has addressed the effects of reduced posterior instrumentation mass on interbody construct techniques. Unilateral surgical exposure for transforaminal lumbar interbody fusion (TLIF) allows ipsilateral pedicle screw placement. Theoretically, percutanous contralateral facet screw placement could provide supplemental construct support without additional surgical exposure. PURPOSE: Identify the biomechanical effects of reduced spinal fusion instrumentation mass on interbody construct stability. STUDY DESIGN: An in vitro biomechanical study using human lumbar spines comparing stability of TLIF constructs augmented by: (1) bilateral pedicle screw fixation, (2) unilateral pedicle screw fixation, or (3) a novel unilateral pedicle screw fixation supplemented with contralateral facet screw construct. METHODS: Seven fresh frozen human cadaveric specimens were tested in random construct order in flexion/extension, lateral bending, and axial rotation using +/-5.0 Nm torques and 50 N axial compressive loads. Analysis of torque rotation curves determined construct stability. Using paired statistical methods, comparison of construct stiffness and total range of motion within each specimen were performed using the Wilcoxon signed ranks test with a Holm-Sidák multiple comparison procedure (alpha=0.05). RESULTS: In flexion/extension, lateral bending, and axial rotation, there were no measurable differences in either stiffness or range of motion between the standard bilateral pedicle screw and the novel construct after TLIF. After TLIF, the unilateral pedicle screw construct provided only half of the improvement in stiffness compared with bilateral or novel constructs and allows for significant off-axis rotational motions, which could be detrimental to stability and the promotion for fusion. CONCLUSIONS: All tested TLIF constructs with posterior instrumentation decreased segmental range of motion and increased segmental stiffness. While placing unilateral posterior instrumentation decreases overall implant bulk and dissection, it allows for significantly increased segmental range of motion, less stiffness, and produces off-axis movement. The technique of contralateral facet screw placement provides the surgical advantages of unilateral pedicle screw placement with stability comparable to TLIF with bilateral pedicle screws.

The efficacy and integrity of shape memory alloy staples and bone anchors with ligament tethers in the fusionless treatment of experimental scoliosis.

BACKGROUND: Scoliosis is a complex three-dimensional deformity with limited treatment options. Current treatments present potential problems that may be addressed with use of fusionless techniques for the correction of scoliosis. However, there are few data comparing the efficacy of different fusionless implant strategies in controlling scoliosis or on the integrity of rigid compared with flexible devices in an in vivo setting over time. The objective of this study was to compare the efficacy and integrity of rigid and flexible anterior thoracic tethers used to treat experimental scoliosis. METHODS: Experimental scoliosis was created in twenty-four Spanish Cross-X female goats and was subsequently treated with either anterior shape memory alloy staples or anterior ligament tethers attached to bone anchors. Serial radiographs were analyzed to determine the efficacy of the implants in controlling scoliosis progression as well as the integrity of the implants at study completion. After the goats were killed, the implants were analyzed with use of three quantitative indices of implant integrity and implant pullout testing. RESULTS: Over the treatment period, scoliosis progressed from 77.3 degrees to 94.3 degrees in the goats treated with staples and was corrected from 73.4 degrees to 69.9 degrees in the goats treated with bone anchors, with loosening of eighteen of forty-two staples (two of the eighteen dislodged) and evidence of drift in two of forty-nine anchors. Histologic sections revealed a consistent halo of fibrous tissue around the staple tines but well-fixed bone anchors at all sites. Pullout testing demonstrated that bone anchors had greater strength than staples initially and at the study completion, with an increase in bone anchor fixation over the course of the study. CONCLUSIONS: In this scoliosis model, the flexible ligament tethers attached to bone anchors demonstrated greater efficacy and integrity than the more rigid shape memory alloy staples.

The use of animal models in fusionless scoliosis investigations.

STUDY DESIGN: Review article of current knowledge of animal models used in the investigations of fusionless scoliosis surgery. OBJECTIVE: To provide a summary of available data on animal studies in the area of fusionless scoliosis surgery. SUMMARY OF BACKGROUND DATA: Fusionless scoliosis surgery is an emerging treatment for patients with idiopathic scoliosis as it offers theoretical advantages over current forms of treatment. These advantages include correction of spinal deformity while preserving growth, motion, and function of the spine. METHODS: Literature review of animal models used in the investigation of fusionless scoliosis surgery. RESULTS: At present, the theoretical advantages of fusionless scoliosis surgery in the treatment of idiopathic scoliosis are unproven clinically. However, investigations using animal models have demonstrated promise for this new form of treatment. These studies have demonstrated the safety and efficacy of a variety of fusionless scoliosis implants in treating experimental scoliosis and in modulating spinal growth. CONCLUSION: Fusionless scoliosis surgery offers theoretical advantages over brace treatment and surgery. Like bracing, fusionless treatments preserve growth, motion, and function of the spine. Like surgery, these treatments offer substantial correction of deformity. However, minimally invasive fusionless scoliosis surgery is less extensive than fusion surgery and may avoid adjacent segment degeneration and other complications related to fusion. Additional investigations are required to identify optimal implant strategies, to evaluate the effects of these implants of the spine and surrounding structures, and to define the appropriate patient population for these interventions.

Prediction of curve progression in a goat scoliosis model.

OBJECTIVES: Currently, prediction of progression in scoliosis is accomplished by analysis of several factors, which provide only a broad percentage chance, rather than an accurate risk assessment, of deformity progression. A model for prediction of scoliosis progression was investigated using an experimental scoliosis: A goat model was used to predict curve progression based on the percentage of vertebral body wedging in the region of maximal deformity. METHODS: Structural, lordoscoliotic curves of significant magnitude (> or = 30 degrees) convex to the right in the thoracic spine were created in 15 immature goats using a rigid posterior asymmetric tether in combination with convex rib resection and concave rib tethering. At 12 weeks, all posterior tethers were removed, and the goats were observed for an additional 4-week period. Serial radiographs were used to document progression (defined as > or = 5 degrees) and vertebral body wedging within the maximal scoliotic deformity. RESULTS: During the additional 4-week observation period following removal of the tether, seven goats developed progressive curves (mean progression: +10.1 degrees, range: +6 degrees to +17 degrees) and eight goats developed nonprogressive curves (mean: -1.6 degrees, range: -8 degrees to +4 degrees). At the beginning of the observation period, the percentage of vertebral body wedging was 60.4% versus 50.2% in the progressive versus nonprogressive groups (P = 0.002). Thus, at 55.3% vertebral body wedging, prediction of curve progression was possible for 85% of progressors and 88% of nonprogressors. CONCLUSIONS: Prediction of curve progression is often difficult when based on skeletal maturity and curve magnitude alone. In an immature goat scoliosis model, however, in which these two factors are relatively well controlled, curve progression can be predicted based on the percentage of vertebral body wedging in the region of maximal deformity.

Fusionless scoliosis correction using a shape memory alloy staple in the anterior thoracic spine of the immature goat.

STUDY DESIGN: Experimental scoliosis was created in goats and then treated using anterior thoracic stapling. OBJECTIVE: To correct, without fusion, a progressive idiopathic-type scoliotic deformity in an immature goat model using a shape memory alloy staple. SUMMARY OF BACKGROUND DATA: Fusionless scoliosis treatment techniques, using minimally invasive approaches to the anterior thoracic spine, provide theoretical advantages over currently available forms of treatment. METHODS: Experimental scoliosis was created in 40 goats using a posterior asymmetric tether with convex rib resection and concave rib tethering for a period of up to 15 weeks. Twenty-seven goats with progressive deformities were used for subsequent study and randomized into 4 treatment groups: group I, anterior thoracic stapling with removal of the posterior tether; group II, removal of the posterior tether only; group III, anterior thoracic stapling with persistent posterior tethering; and group IV, persistent posterior tethering with no treatment. The treatment period lasted an additional 6 to 14 weeks. Staple backout was graded radiographically. After killing the goats, histology and disc biochemistry analyses were conducted. RESULTS: The goats in group I corrected from an initial 57 degrees of curvature to 43 degrees over the duration of the treatment period. Group II goats, which served as a control for group I, corrected from 67 degrees to 60 degrees during the treatment period. Group III goats demonstrated a modest correction from 65 degrees to 63 degrees with the stapling procedure, whereas group IV goats (controls for group III) progressed from 55 degrees to 67 degrees with a persistent posterior tether during the treatment period. The difference between the correction in group III and progression in group IV was statistically significant (P = 0.002). Complications were limited to partial staple backout in 27% of 56 staples. CONCLUSIONS: The results of this study support the efficacy of an anterior thoracic staple in correcting moderately severe scoliosis and halting the progression of more malignant scoliosis without fusion in a goat model.

Experimental scoliosis in an immature goat model: a method that creates idiopathic-type deformity with minimal violation of the spinal elements along the curve.

STUDY DESIGN: Experimental scoliosis was created in an immature goat model. OBJECTIVES: To create a progressive, structural, idiopathic-type, lordoscoliotic curve convex to the right in the thoracic spine of the immature goat while maintaining the anterior and posterior elements of the spine along the maximal curve in a pristine state. SUMMARY OF BACKGROUND DATA: Progressive scoliotic curves in a small animal model have been created using a posterior asymmetric tether. However, attempts in larger animal models have had less success and typically required violation of the spinal elements. METHODS: Scoliosis was created in 40 Spanish Cross X female goats (age 1-2 months, weight 8-12 kg) using a left posterior asymmetric tether from T5 to L1. Convex rib resection and concave rib tethering from T8 to T13 were performed before compression across the rigid construct. Goats were followed over a 6- to 15-week period with serial radiographs to document progression of the deformity. RESULTS: Of the 40 goats that underwent posterior assymetric tethering with rib procedures, 7 (18%) encountered substantial complications (five deaths and two neurologic injuries). Of the 33 available for analysis, 27 goats (82%) developed progressive, structural, idiopathic-type, lordoscoliotic curves in convex to the right in the thoracic spine. All curves demonstrated characteristic radiographic features of idiopathic scoliosis including significant displacement of the apical vertebra from the midline, wedging of both the vertebral bodies and discs, rotation, and decreased flexibility. Initial scoliosis after posterior asymmetric tethering measured 42 degrees on average (range 33-50 degrees ) and progressed to 60 degrees on average (range 44-73 degrees ) over 6 to 15 weeks. The average progression of +18 degrees (range 6-37 degrees ) was statistically significant (P < 0.001). CONCLUSIONS: This study establishes an experimental model for scoliosis that creates progressive, structural, idiopathic-type, lordoscoliotic curves convex to the right in the thoracic spine of the immature goat with high statistical significance (P < 0.001). In addition, this method of experimental scoliosis creation avoids violation of the spinal elements throughout the maximal portion of the curve providing an ideal opportunity subsequent study of the deformity.