Organ-on-a-Chip for Drug Screening: A Bright Future for Sustainability? A Critical Review.

Globalization has raised concerns about spreading diseases and emphasized the need for quick and efficient methods for drug screening. Established drug efficacy and toxicity approaches have proven obsolete, with a high failure rate in clinical trials. Organ-on-a-chip has emerged as an essential alternative to outdated techniques, precisely simulating important characteristics of organs and predicting drug pharmacokinetics more ethically and efficiently. Although promising, most organ-on-a-chip devices are still manufactured using principles and materials from the micromachining industry. The abusive use of plastic for traditional drug screening methods and device production should be considered when substituting technologies so that the compensation for the generation of plastic waste can be projected. This critical review outlines recent advances for organ-on-a-chip in the industry and estimates the possibility of scaling up its production. Moreover, it analyzes trends in organ-on-a-chip publications and provides suggestions for a more sustainable future for organ-on-a-chip research and production.

Electrochemical Biosensor for SARS-CoV-2 cDNA Detection Using AuPs-Modified 3D-Printed Graphene Electrodes.

A low-cost and disposable graphene polylactic (G-PLA) 3D-printed electrode modified with gold particles (AuPs) was explored to detect the cDNA of SARS-CoV-2 and creatinine, a potential biomarker for COVID-19. For that, a simple, non-enzymatic electrochemical sensor, based on a Au-modified G-PLA platform was applied. The AuPs deposited on the electrode were involved in a complexation reaction with creatinine, resulting in a decrease in the analytical response, and thus providing a fast and simple electroanalytical device. Physicochemical characterizations were performed by SEM, EIS, FTIR, and cyclic voltammetry. Square wave voltammetry was employed for the creatinine detection, and the sensor presented a linear response with a detection limit of 0.016 mmol L-1. Finally, a biosensor for the detection of SARS-CoV-2 was developed based on the immobilization of a capture sequence of the viral cDNA upon the Au-modified 3D-printed electrode. The concentration, immobilization time, and hybridization time were evaluated in presence of the DNA target, resulting in a biosensor with rapid and low-cost analysis, capable of sensing the cDNA of the virus with a good limit of detection (0.30 µmol L-1), and high sensitivity (0.583 µA µmol-1 L). Reproducible results were obtained (RSD = 1.14%, n = 3), attesting to the potentiality of 3D-printed platforms for the production of biosensors.

Colorimetric Paper-Based Immunosensor for Simultaneous Determination of Fetuin B and Clusterin toward Early Alzheimer's Diagnosis.

Alzheimer's disease is a devastating condition characterized by a progressive and slow brain decay in elders. Here, we developed a paper-based lateral flow immunoassay for simultaneous and fast determination of Alzheimer's blood biomarkers, fetuin B and clusterin. Selective antibodies to targeted biomarkers were immobilized on gold nanoparticles (AuNPs) and deposited on paper pads. After adding the sample on the paper-based device, the biofluid laterally flows toward the selective antibody, permitting AuNP-Ab accumulation on the test zone, which causes a color change from white to pink. Image analysis was performed using a customized algorithm for the automatic recognition of the area of analysis and color clustering. Colorimetric detection was compared to electrochemical methods for the precise quantification of biomarkers. The best performance was found for the color parameter "L*". Good linearity (R2 = 0.988 and 0.998) and reproducibility (%RSD = 2.79% and 1.82%, N = 3) were demonstrated for the quantification of fetuin B and clusterin, respectively. Furthermore, the specificity of the immunosensor was tested on mixtures of proteins, showing negligible cross-reactivity and good performance in complex environments. We believe that our biosensor has a potential for early-stage diagnosis of Alzheimer's disease and toward a better understanding of Alzheimer's developing mechanisms.

An antibody-based platform for melatonin quantification.

Melatonin, the 'chemical signal of darkness', is responsible to regulate biological rhythms and different physiological processes. It is mainly produced by the pineal gland as a hormone in a rhythmic daily basis, but it may also be synthesized by other tissues, such as immune cells, under inflammatory conditions. Its abnormal circulating levels have been related to several diseases such as type 2 diabetes, Alzheimer's disease and some types of cancer. Currently, melatonin is exclusively quantified by ELISA or radioimmunoassays, which although are very sensitive techniques and present low detection limits, usually require specialized personal and equipment, restricting the tests to a limited number of patients. To overcome such limitations, we developed a novel easy-to-use electrochemical immunosensor for rapid melatonin quantification. Anti-melatonin antibodies were immobilized into Indium tin oxide (ITO) platforms using (3-Aminopropyl)triethoxysilane (APTES), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS) crosslinkers. The platforms were assayed with synthetic and biologically-present melatonin containing samples. The developed device displayed a linear response in the concentration range from 0.75 to 7.5 µmol/L and a limit of detection of 0.175 µmol/L using Electrochemical Impedance Spectroscopy (EIS) (R2 = 0.989) and 0.513 µmol/L using Cyclic Voltammetry (CV) (R²â€¯= 0.953) for synthetic melatonin. Furthermore, the sensors exhibited a good stability and reproducibility (3.45% and 2.87% for EIS and CV, respectively, n = 3), maintaining adequate response even after 30 days of assembly. On biologically-present melatonin-containing samples the device displayed a similar performance when compared to ELISA technique (deviation of 13.31%). We expect that the developed device contributes significantly to the medical area allowing precise and complete diagnosis of the diseases related to abnormal levels of melatonin.

Immobilization of lutetium bisphthalocyanine in nanostructured biomimetic sensors using the LbL technique for phenol detection.

This study describes the development of amperometric sensors based on poly(allylamine hydrochloride) (PAH) and lutetium bisphthalocyanine (LuPc(2)) films assembled using the Layer-by-Layer (LbL) technique. The films have been used as modified electrodes for catechol quantification. Electrochemical measurements have been employed to investigate the catalytic properties of the LuPc(2) immobilized in the LbL films. By chronoamperometry, the sensors present excellent sensitivity (20 nA µM(-1)) in a wide linear range (R(2)=0.994) up to 900 µM and limit of detection (s/n=3) of 37.5 × 10(-8)M for catechol. The sensors have good reproducibility and can be used at least for ten times. The work potential is +0.3 V vs. saturated calomel electrode (SCE). In voltammetry measurements, the calibration curve shows a good linearity (R(2)=0.992) in the range of catechol up to 500 µM with a sensitivity of 90 nA µM(-1) and LD of 8 µM.