ABSTRACT
Wurtzite-type ferroelectrics have drawn increasing attention due to the promise of better performance and integration than traditional oxide ferroelectrics with semiconductors such as Si, SiC, and III-V compounds. However, wurtzite-type ferroelectrics generally require enormous electric fields, approaching breakdown, to reverse their polarization. The underlying switching mechanism(s), especially for multinary compounds and alloys, remains elusive. Here, we examine the switching behaviors in Al1-xScxN alloys and wurtzite-type multinary candidate compounds we recently computationally identified. We find that switching in these tetrahedrally coordinated materials proceeds via a variety of nonpolar intermediate structures and that switching barriers are dominated by the more-electronegative cations. For Al1-xScxN alloys, we find that the switching pathway changes from a collective mechanism to a lower-barrier mechanism enabled by inversion of individual tetrahedra with increased Sc composition. Our findings provide insights for future engineering and realization of wurtzite-type materials and open a door to understanding domain motion.
ABSTRACT
Correction for 'Anomalously abrupt switching of wurtzite-structured ferroelectrics: simultaneous non-linear nucleation and growth model' by Keisuke Yazawa et al., Mater. Horiz., 2023, https://doi.org/10.1039/D3MH00365E.
ABSTRACT
Ferroelectric polarization switching is one common example of a process that occurs via nucleation and growth, and understanding switching kinetics is crucial for applications such as ferroelectric memory. Here we describe and interpret anomalous switching dynamics in the wurtzite-structured nitride thin film ferroelectrics Al0.7Sc0.3N and Al0.94B0.06N using a general model that can be directly applied to other abrupt transitions that proceed via nucleation and growth. When substantial growth and impingement occur while nucleation rate is increasing, such as in these wurtzite-structured ferroelectrics under high electric fields, abrupt polarization reversal leads to very large Avrami coefficients (e.g., n = 11), inspiring an extension of the KAI (Kolmogorov-Avrami-Ishibashi) model. We apply this extended model to two related but distinct scenarios that crossover between (typical) behavior described by sequential nucleation and growth and a more abrupt transition arising from significant growth prior to peak nucleation rate. This work therefore provides a more complete description of general nucleation and growth kinetics applicable to any system while specifically addressing the anomalously abrupt polarization reversal behavior in new wurtzite-structured ferroelectrics.
ABSTRACT
A high-speed and high-power current measurement instrument is described for measuring rapid switching of ferroelectric samples with large spontaneous polarization and coercive field. Instrument capabilities (±200 V, 200 mA, and 200 ns order response) are validated with a LiTaO3 single crystal whose switching kinetics are well known. The new instrument described here enables measurements that are not possible using existing commercial measurement systems, including the observation of ferroelectric switching in large coercive field and large spontaneous polarization Al0.7Sc0.3N thin films.
ABSTRACT
Nitride perovskites have only been experimentally realized in very few cases despite the widespread existence and commercial importance of perovskite materials. From oxide perovskites used in ultrasonics to halide perovskites that have revolutionized the photovoltaics industry, the discovery of new perovskite materials has historically impacted a wide number of fields. Here, we add two new perovskites, CeWN3 and CeMoN3, to the list of experimentally realized perovskite nitrides using high-throughput computational screening and subsequent high-throughput thin film growth techniques. Candidate compositions are first down-selected using a tolerance factor and then thermochemical stability. A novel competing fluorite-family phase is identified for both material systems, which we hypothesize is a transient intermediate phase that crystallizes during the evolution from an amorphous material to a stable perovskite. Different processing routes to overcome the competing fluorite phase and obtain phase-pure nitride perovskites are demonstrated for the CeMoN3-x and CeWN3-x material systems, which provide a starting point for the development of future nitride perovskites. Additionally, we find that these new perovskite phases have interesting low-temperature magnetic behavior: CeMoN3-x orders antiferromagnetically below T N ≈ 8 K with indications of strong magnetic frustration, while CeWN3-x exhibits no long-range order down to T = 2 K but has strong antiferromagnetic correlations. This work demonstrates the importance and effectiveness of using high-throughput techniques, both computational and experimental: they are integral to optimize the process of realizing two entirely novel nitride perovskites.
ABSTRACT
Oxide materials with the perovskite structure have been used in sensors and actuators for half a century, and halide perovskites transformed photovoltaics research in the past decade. Nitride perovskites have been computationally predicted to be stable, but few have been synthesized, and their properties remain largely unknown. We synthesized and characterized a nitride perovskite lanthanum tungsten nitride (LaWN3) in the form of oxygen-free sputtered thin films, according to spectroscopy, scattering, and microscopy techniques. We report a large piezoelectric response measured with scanning probe microscopy that together with synchrotron diffraction confirm polar symmetry of the perovskite LaWN3. Our LaWN3 synthesis should inspire growth of other predicted nitride perovskites, and measurements of their properties could lead to functional integration with nitride semiconductors for microelectromechanical devices.
ABSTRACT
MXenes are emerging two-dimensional (2D) materials for energy-storage applications and supercapacitors. Their surface chemistry, which determines critical properties, varies due to different synthesis conditions. In this work, we synthesized TiVC solid-solution MXenes by two different synthesis methods and investigated their surface functional groups. We performed etching of the TiVAlC MAX phase using two different solutions, a highly concentrated HF (50 wt % ≈ 29 M) and a mixture of LiF and HCl (1.9 M LiF/12 M HCl). Large-scale delamination of TiVCTx to produce single-flake suspension was achieved by further intercalation of the resultant MXene from LiF/HCl with tetrabutylammonium hydroxide (TBAOH). X-ray diffraction indicates a large interlayer spacing of 2.18 nm for TiVCTx MXene flakes. To investigate the structural stability and adsorption energy of different functional groups on TiVC MXenes, density functional theory (DFT) calculations were performed and supported with X-ray photoelectron spectroscopy (XPS) measurements. A higher concentration of âO and a lower concentration of -F were achieved on the TiVC synthesized by LiF/HCl, both of which provide a more favorable surface chemistry for energy-storage applications. Our results provide the first systematic study on the effect of synthesis conditions on the surface chemistry of solid-solution TiVC MXenes.
ABSTRACT
Dielectric breakdown of oxides is a main limiting factor for improvement of the performance of electronic devices. Present understanding suggests that defects produced by intense voltage accumulate in the oxide to form a percolation path connecting the two electrodes and trigger the dielectric breakdown. However, reports on directly visualizing the process at nanoscale are very limited. Here, we apply in situ transmission electron microscopy to characterize the structural and compositional changes of amorphous TiO2 under extreme electric field (â¼100 kV/mm) in a Si/TiO2/W system. Upon applying voltage pulses, the amorphous TiO2 gradually transformed into crystalline substoichiometric rutile TiO2-x and the Magnéli phase Ti3O5. The transitions started from the anode/oxide interface under both field polarities. Preferred growth orientation of rutile TiO2-x with respect to the Si substrate was observed when Si was the anode, while oxidation and melting of the W probe occurred when W was the anode. We associate the TiO2 crystallization process with the electrochemical reduction of TiO2, polarity-dependent oxygen migration, and Joule heating. The experimental results are supported by our phase-field modeling. These findings provide direct details of the defect formation process during dielectric breakdown in amorphous oxides and will help the design of electronic devices with higher efficiency and reliability.
Subject(s)
Membranes, Artificial , Titanium/chemistry , Crystallization , Microscopy, Electron, TransmissionABSTRACT
Combinatorial experiments involve synthesis of sample libraries with lateral composition gradients requiring spatially resolved characterization of structure and properties. Because of the maturation of combinatorial methods and their successful application in many fields, the modern combinatorial laboratory produces diverse and complex data sets requiring advanced analysis and visualization techniques. In order to utilize these large data sets to uncover new knowledge, the combinatorial scientist must engage in data science. For data science tasks, most laboratories adopt common-purpose data management and visualization software. However, processing and cross-correlating data from various measurement tools is no small task for such generic programs. Here we describe COMBIgor, a purpose-built open-source software package written in the commercial Igor Pro environment and designed to offer a systematic approach to loading, storing, processing, and visualizing combinatorial data. It includes (1) methods for loading and storing data sets from combinatorial libraries, (2) routines for streamlined data processing, and (3) data-analysis and -visualization features to construct figures. Most importantly, COMBIgor is designed to be easily customized by a laboratory, group, or individual in order to integrate additional instruments and data-processing algorithms. Utilizing the capabilities of COMBIgor can significantly reduce the burden of data management on the combinatorial scientist.
Subject(s)
Combinatorial Chemistry Techniques , Data Analysis , Software , HumansABSTRACT
Knowledge of accurate values of elastic modulus of (Al1-xScx)N is required for design of piezoelectric resonators and related devices. Thin films of (Al1-xScx)N across the entire composition space are deposited and characterized. Accuracy of modulus measurements is improved and quantified by removing the influence of substrate effects and by direct comparison of experimental results with density functional theory calculations. The 5%-30% Sc compositional range is of particular interest for piezoelectric applications and is covered at higher compositional resolution here than in previous work. The reduced elastic modulus is found to decrease by as much as 40% with increasing Sc concentration in the wurtzite phase according to both experimental and computational techniques, whereas Sc-rich rocksalt-structured films exhibit little variation in modulus with composition.