Cannabidiol and tetrahydrocannabinol concentrations in commercially available CBD E-liquids in Switzerland.

Cannabidiol (CBD) rich hemp and hemp products low in Δ9-tetrahydrocannabinol (THC) (less than 1%) are legally available in Switzerland. Besides herbs for smoking and oils, liquids (e-liquids) for smoking in electronic cigarettes (e-cigs) have recently appeared on the market. These e-liquids are available with different CBD concentrations and can be flavoured. The aim of the current study was to investigate 20 e-liquids legally available in Switzerland for their contents using Fourier-transform infrared spectroscopy (FTIR) as a preliminary step followed by gas-chromatography coupled to mass spectrometry to identify potential cannabinoids, natural plant compounds and flavours. Quantification of CBD, cannabidiol carboxylic acid (CBD-acid), cannabinol (CBN), Δ9-tetrahydrocannabinol (THC), and Δ9-tetrahydrocannabinol carboxylic acid A (THC-acid) was performed by a validated method with ultra-high-pressure-liquid chromatography coupled to a diode array detector (UHPLC-DAD). FTIR analysis could confirm that for all investigated samples the e-liquid matrix consisted of 1,2-propanediol and glycerol. The qualitative GC-MS could identify ten phytocannabinoids including the quantified analytes, six natural plant compounds and five flavours. All analysed samples had a total THC content below 0.1059% (by weight), hence meeting the legal requirements of both Switzerland (<1%) and the European Union (<0.2%). The total CBD content ranged from 0.182 to 3.346% and differed in ten out of 20 samples from the CBD content presented by the manufacturer by more than 10% relative CBD. Furthermore, two of the analysed samples contained only 0.348% and 0.182% total CBD despite being labelled as "CBD rich". Seven of the 20 samples contained the correct CBD content (in the range of the labelled CBD content ± 10%). In conclusion, a deviation in the determined total CBD content from the labelled CBD content could be observed for half of the analysed samples, meaning that consumers cannot rely on the manufacturers' information. It is remarkable, that currently no official regulations for providing correct information of CBD content or any external product control is available in Switzerland and in most other countries.

Analysis of volatiles in fire debris by combination of activated charcoal strips (ACS) and automated thermal desorption-gas chromatography-mass spectrometry (ATD/GC-MS).

Adsorption of volatiles in gaseous phase to activated charcoal strip (ACS) is one possibility for the extraction and concentration of ignitable liquid residues (ILRs) from fire debris in arson investigations. Besides liquid extraction using carbon dioxide or hexane, automated thermo-desorption can be used to transfer adsorbed residues to direct analysis by gas chromatography-mass spectrometry (GC-MS). We present a fire debris analysis work-flow with headspace adsorption of volatiles onto ACS and subsequent automated thermo-desorption (ATD) GC-MS analysis. Only a small portion of the ACS is inserted in the ATD tube for thermal desorption coupled to GC-MS, allowing for subsequent confirmation analysis with another portion of the same ACS. This approach is a promising alternative to the routinely used ACS method with solvent extraction of retained volatiles, and the application to fire debris analysis is demonstrated.

Simultaneous quantification of delta-9-THC, THC-acid A, CBN and CBD in seized drugs using HPLC-DAD.

An HPLC-DAD method for the quantitative analysis of Δ(9)-tetrahydrocannabinol (THC), Δ(9)-tetrahydrocannabinolic acid-A (THCA-A), cannabidiol (CBD), and cannabinol (CBN) in confiscated cannabis products has been developed, fully validated and applied to analyse seized cannabis products. For determination of the THC content of plant material, this method combines quantitation of THCA-A, which is the inactive precursor of THC, and free THC. Plant material was dried, homogenized and extracted with methanol by ultrasonication. Chromatographic separation was achieved with a Waters Alliance 2695 HPLC equipped with a Merck LiChrospher 60 RP-Select B (5µm) precolumn and a Merck LiChroCart 125-4 LiChrospher 60 RP-Select B (5µm) analytical column. Analytes were detected and quantified using a Waters 2996 photo diode array detector. This method has been accepted by the public authorities of Switzerland (Bundesamt für Gesundheit, Federal Office of Public Health), and has been used to analyse 9092 samples since 2000. Since no thermal decarboxylation of THCA-A occurs, the method is highly reproducible for different cannabis materials. Two calibration ranges are used, a lower one for THC, CBN and CBD, and a higher one for THCA-A, due to its dominant presence in fresh plant material. As provider of the Swiss proficiency test, the robustness of this method has been tested over several years, and homogeneity tests even in the low calibration range (1%) show high precision (RSD≤4.3%, except CBD) and accuracy (bias≤4.1%, except CBN).