ABSTRACT
Nuclear resonance time domain interferometry (NR-TDI) is used to study the slow dynamics of liquids (that do not require Mössbauer isotopes) at atomic and molecular length scales. Here the TDI method of using a stationary two-line magnetized 57Fe foil as a source and a stationary single-line stainless steel foil analyzer is employed. The new technique of adding an annular slit in front of a single silicon avalanche photodiode detector enables a wide range of momentum transfers (1 to 100â nm-1 by varying the distance between the annular slits and sample) with a high count rate of up to 160â Hz with a Δq resolution of ±1.7â nm-1 at q = 14â nm-1. The sensitivity of this method in determining relaxation times is quantified and discussed. The Kohlrausch-Williams-Watts (KWW) model was used to extract relaxation times for glycerol. These relaxation times give insight into the dynamics of the electron density fluctuations of glycerol as a function of temperature and momentum transfers.
ABSTRACT
Electrochemical hydrogenation of N2 under ambient conditions is attractive for sustainable and distributable NH3 production but is limited by the lack of selective electrocatalysts. Herein, we describe active site motifs based on the Chevrel phase chalcogenide Fe2Mo6S8 that exhibit intrinsic activities for converting N2 to NH3 in aqueous electrolytes. Despite having a very low specific surface area of â¼2 m2/g, this catalyst exhibited a Faradaic efficiency of 12.5% and an average rate of 70 µg h-1 mgcat-1 for NH3 production at -0.20 V vs RHE. Such activities were attributed to the unique composition and structure of Fe2Mo6S8 that provide synergistic multisites for activating and associating key reaction intermediates. Specifically, Fe/Mo sites assist adsorption and activation of N2, whereas S sites stabilize hydrogen intermediate Had* for N2 hydrogenation. Fe in Fe2Mo6S8 enhances binding of S with Had* and thus inhibits the competing hydrogen evolution reaction. The spatial geometry of Fe, Mo, and S sites in Fe2Mo6S8 promotes conversion of N2-Had* association intermediates, reaching a turnover frequency of â¼0.23 s-1 for NH3 production.
ABSTRACT
The practical deployment of advanced Li-S batteries is severely constrained by the uncontrollable lithium polysulfide conversion under realistic conditions. Although a plethora of advanced sulfur hosts and electrocatalysts have been examined, the fundamental mechanisms are still elusive and predictive design approaches have not yet been established. Here, we examined a series of well-defined Fe-N-C sulfur hosts with systematically varied and strongly coupled Fe3C and Fe electrocatalysts, prepared by one-step pyrolysis of a novel Fex[Fe(CN)6]y/polypyrrole composite at different temperatures. We revealed the key roles of Fe3C and metallic Fe on modulating polysulfide conversion, in that the polar Fe3C strongly adsorbs polysulfide whereas the Fe particles catalyze fast polysulfide conversion. We then highlight the superior performance of the rational host with strongly coupled Fe3C and Fe on mesoporous Fe-N-C host on promoting nearly complete polysulfide conversion, especially for the challenging short-chain Li2S4 conversion to Li2S. The electrodeposited Li2S on this host was extremely reactive and can be readily charged back to S with minimal activation overpotential. Overall, Li-S batteries equipped with the novel sulfur host delivered a high specific capacity of 1350 mAh g-1 at 0.1C with a capacity retention of 96% after 200 cycles. This work provides new insights on the functional mechanism of advanced sulfur hosts, which could eventually translate into new design principles for practical Li-S batteries.
ABSTRACT
The crystal structures and phase relationships of Tb1-x Dy x Co2 alloys with 0 ⩽ x ⩽ 1 were investigated by synchrotron-based high-resolution x-ray powder diffraction. Three different crystal structures are observed in the system: all the compositions show cubic structure with space group [Formula: see text] at temperatures above the Curie temperature T C; the Tb-rich side sample shows a rhombohedral structure with space group [Formula: see text] and the Dy-rich side sample has a tetragonal [Formula: see text] space group. In situ measurements on the intermediate compound Tb0.3Dy0.7Co2 show a rhombohedral to tetragonal structural transition, and the two phases coexist from 99 K to 111 K, where the so-called magnetic morphotropic phase boundary (MPB) is found. The coexisting phases are believed to induce the anomalous magnetostrictive effect in the MPB regime.
ABSTRACT
Time-domain synchrotron Mössbauer spectroscopy (SMS) based on the Mössbauer effect of 161 Dy has been used to investigate the magnetic properties of a DyIII -based single-molecule magnet (SMM). The magnetic hyperfine field of [Dy(Cy3 PO)2 (H2 O)5 ]Br3 â 2 (Cy3 PO)â 2 H2 Oâ 2 EtOH is with B0 =582.3(5)â T significantly larger than that of the free-ion DyIII with a 6 H15/2 ground state. This difference is attributed to the influence of the coordinating ligands on the Fermi contact interaction between the s and 4f electrons of the DyIII ion. This study demonstrates that 161 Dy SMS is an effective local probe of the influence of the coordinating ligands on the magnetic structure of Dy-containing compounds.
ABSTRACT
Responding to the rapidly increasing demand for efficient energy usage and increased speed and functionality of electronic and spintronic devices, multiferroic oxides have recently emerged as key materials capable of tackling this multifaceted challenge. In this paper, we describe the development of single-site manganese-based multiferroic perovskite materials with modest amounts of nonmagnetic Ti substituted at the magnetic Mn site in Sr1- x Ba x Mn1- y Ti y O3 (SBMTO). Significantly enhanced properties were achieved with ferroelectric-type structural transition temperatures boosted to â¼430K. Ferroelectric distortions with large spontaneous polarization values of â¼30µC/cm2, derived from a point charge model, are similar in magnitude to those of the prototypical nonmagnetic BaTiO3. Temperature dependence of the system's properties was investigated by synchrotron x-ray powder diffraction and neutron powder diffraction at ambient and high pressures. Various relationships were determined between the structural and magnetic properties, Ba and Ti contents, and T N and T C. Most importantly, our results demonstrate the large coupling between the magnetic and ferroelectric order parameters and the wide tunability of this coupling by slight variations of the material's stoichiometry.
ABSTRACT
The structure of the mineral schafarzikite, FeSb2O4, has one-dimensional channels with walls comprising Sb3+ cations; the channels are separated by edge-linked FeO6 octahedra that form infinite chains parallel to the channels. Although this structure provides interest with respect to the magnetic and electrical properties associated with the chains and the possibility of chemistry that could occur within the channels, materials in this structural class have received very little attention. Here we show, for the first time, that heating selected phases in oxygen-rich atmospheres can result in relatively large oxygen uptakes (up to â¼2% by mass) at low temperatures (ca. 350 °C) while retaining the parent structure. Using a variety of structural and spectroscopic techniques, it is shown that oxygen is inserted into the channels to provide a structure with the potential to show high one-dimensional oxide ion conductivity. This is the first report of oxygen-excess phases derived from this structure. The oxygen insertion is accompanied not only by oxidation of Fe2+ to Fe3+ within the octahedral chains but also Sb3+ to Sb5+ in the channel walls. The formation of a defect cluster comprising one 5-coordinate Sb5+ ion (which is very rare in an oxide environment), two interstitial O2- ions, and two 4-coordinate Sb3+ ions is suggested and is consistent with all experimental observations. To the best of our knowledge, this is the first example of an oxidation process where the local energetics of the product dictate that simultaneous oxidation of two different cations must occur. This reaction, together with a wide range of cation substitutions that are possible on the transition metal sites, presents opportunities to explore the schafarzikite structure more extensively for a range of catalytic and electrocatalytic applications.
ABSTRACT
Individual metallic nanowires can sustain ultralarge elastic strains of 4-7%. However, achieving and retaining elastic strains of such magnitude in kilogram-scale nanowires are challenging. Here, we find that under active load, â¼ 5.6% elastic strain can be achieved in Nb nanowires embedded in a metallic matrix deforming by detwinning. Moreover, large tensile (2.8%) and compressive (-2.4%) elastic strains can be retained in kilogram-scale Nb nanowires when the external load was fully removed, and adjustable in magnitude by processing control. It is then demonstrated that the retained tensile elastic strains of Nb nanowires can increase their superconducting transition temperature and critical magnetic field, in comparison with the unstrained original material. This study opens new avenues for retaining large and tunable elastic strains in great quantities of nanowires and elastic-strain-engineering at industrial scale.
ABSTRACT
Elastic strain in bulk metallic materials is usually limited to only a fraction of 1%. Developing bulk metallic materials showing large linear elasticity and high strength has proven to be difficult. Here, based on the synergistic effect between nanowires and orientated martensite NiTi shape memory alloy, we developed an in-situ Nb nanowires -orientated martensitic NiTi matrix composite showing an ultra-large linear elastic strain of 4% and an ultrahigh yield strength of 1.8â GPa. This material also has a high mechanical energy storage efficiency of 96% and a high energy storage density of 36â J/cm(3) that is almost one order of larger than that of spring steel. It is demonstrated that the synergistic effect allows the exceptional mechanical properties of nanowires to be harvested at macro scale and the mechanical properties of matrix to be greatly improved, resulting in these superior properties. This study provides new avenues for developing advanced composites with superior properties by using effective synergistic effect between components.
ABSTRACT
Creating multifunctional materials is an eternal goal of mankind. As the properties of monolithic materials are necessary limited, one route to extending them is to create a composite by combining contrasting materials. The potential of this approach is neatly illustrated by the formation of nature materials where contrasting components are combined in sophisticated hierarchical designs. In this study, inspired by the hierarchical structure of the tendon, we fabricated a novel composite by subtly combining two contrasting components: NiTi shape-memory alloy and Ag. The composite exhibits simultaneously exceptional mechanical properties of high strength, good superelasticity and high mechanical damping, and remarkable functional properties of high electric conductivity, high visibility under fluoroscopy and excellent thermal-driven ability. All of these result from the effective-synergy between the NiTi and Ag components, and place the composite in a unique position in the properties chart of all known structural-functional materials providing new opportunities for innovative electrical, mechanical and biomedical applications. Furthermore, this work may open new avenues for designing and fabricating advanced multifunctional materials by subtly combining contrasting multi-components.
ABSTRACT
Freestanding nanowires have ultrahigh elastic strain limits (4 to 7%) and yield strengths, but exploiting their intrinsic mechanical properties in bulk composites has proven to be difficult. We exploited the intrinsic mechanical properties of nanowires in a phase-transforming matrix based on the concept of elastic and transformation strain matching. By engineering the microstructure and residual stress to couple the true elasticity of Nb nanowires with the pseudoelasticity of a NiTi shape-memory alloy, we developed an in situ composite that possesses a large quasi-linear elastic strain of over 6%, a low Young's modulus of ~28 gigapascals, and a high yield strength of ~1.65 gigapascals. Our elastic strain-matching approach allows the exceptional mechanical properties of nanowires to be exploited in bulk materials.
ABSTRACT
The antimony-121 Mössbauer spectra of the Yb14MnSb11 and Eu14MnSb11 Zintl compounds have been measured between 2 or 5 and 300 K. The resulting three-dimensional arrays of the spectral counts, velocity, and temperature have been simultaneously fit with a minimum number of free parameters. These fits yield a 0 Kelvin transferred hyperfine field of 2.9(2) T, a Curie temperature of 57(3) K, and a Mössbauer temperature of 182(2) K for Yb14MnSb11; in this case the transferred field arises solely from the ordering of Mn2+. Because Eu14MnSb11 has both Eu2+ and Mn2+ ions that are magnetically ordered, its antimony-121 Mössbauer spectra are more complex and reveal two magnetic transitions, the first at 92(1) K resulting from the ordering of the Mn2+ ions and the second at 9.5(1.0) K resulting from the ordering of the Eu2+ ions; the corresponding 0 Kelvin transferred hyperfine fields are 1.3(1) and 3.7(1) T. The antimony-121 isomer shifts yield electronic configurations of 5s1.745p4.28 and 5s1.745p4.19 for the average antimony anion in Yb14MnSb11 and Eu14MnSb11, respectively.
ABSTRACT
The Mössbauer spectra of alpha-Zn4Sb3, a compound that is best formulated as alpha-Zn13Sb10 or (Zn2+)13(Sb3-)6(Sb24-)2, have been measured between 5 and 120 K. The resulting six spectra have been simultaneously fit with two components in the ratio of 3:2 corresponding to the Sb3- and Sb2- ions identified in this valence semiconductor. The fits yield temperature independent isomer shifts of -8.17(2) and -9.73(2) mm/s and quadrupole interactions of -4.9(2) and 0 mm/s for the Sb3- and Sb2- ions, respectively; the corresponding Mössbauer temperatures are 197(5) and 207(5) K, temperatures that are lower than the Debye temperature of beta-Zn4Sb3. The isomer shifts correspond to electronic configurations between 5s25p6 and 5s1.755p4.01 for the Sb3- ions and between 5s25p5 and 5s1.805p3.38 for the Sb2- ions, configurations that are in good agreement with the expected configurations for this valence semiconductor and with the results of band structure calculations.
ABSTRACT
The constructive interference of surface plasmon polaritons (SPP) launched by nanometric holes allows us to focus SPP into a spot of high near-field intensity having subwavelength width. Near-field scanning optical microscopy is used to map the local SPP intensity. The resulting SPP patterns and their polarization dependence are accurately described in model calculations based on a dipolar model for the SPP emission at each hole. Furthermore, we show that the high SPP intensity in the focal spot can be launched and propagated on a Ag strip guide with a 250 x 50 nm2 cross section, thus overcoming the diffraction limit of conventional optics. The combination of focusing arrays and nano-waveguides may serve as a basic element in planar nano-photonic circuits.
Subject(s)
Nanostructures/chemistry , Nanotechnology/instrumentation , Optics and Photonics/instrumentation , Refractometry/instrumentation , Surface Plasmon Resonance/instrumentation , Equipment Design , Equipment Failure Analysis , Nanostructures/analysis , Nanotechnology/methods , Refractometry/methods , Surface Plasmon Resonance/methodsABSTRACT
The antimony-121 Mössbauer spectra of Eu10Mn6Sb13 have been measured between 2 and 295 K. Although the Zintl formalism indicates that the nine crystallographically distinct antimony sites in Eu10Mn6Sb13 should have formal valence states of -2, -1, 0, and +1, the Mössbauer spectral isomer shifts reveal that the valence states of the different sites are all quite similar and correspond to an average electronic configuration for antimony of 5s(1.7)5p(4.0). This configuration corresponds to an excess of negative charge on the antimony of 0.7 or an average valence of -0.7, a valence which is rather consistent with the average antimony valence of -0.61 obtained from the Zintl formalism for the nine antimony sites in Eu10Mn6Sb13. The spectra obtained between 90 and 295 K are more consistent with the absence rather than the presence of any transferred magnetic hyperfine field at the antimony. In contrast, the spectra obtained at 2 and 5 K reveal the presence of an average transferred magnetic hyperfine field of ca. 8 T, a field that arises from the ferromagnetic ordering of the near-neighbor manganese(II) ions.