Chemical-analytical characterization and leaching of heavy metals associated with nanoparticles and microplastics from commercial face masks and the abundance of personal protective equipment (PPE) waste in three metropolitan cities of South America.

In this study, we surveyed the presence of personal protective equipment (PPE) waste on the streets of Bogotá-Colombia, Lima-Perú, and Mar del Plata-Argentina. Furthermore, this work is also focused on the release capacity of Ag, Cu, and Zn metals associated with nanoparticles, and microplastics (MPs) from textile face masks (TFMs) and disposable face masks. According to our results, an association between low-income areas and PPE waste was found, which may be related to the periodicity of waste collection and economic activity. Polymers, like polypropylene, cotton-polyester, and additives, such as CaCO3, MgO, and Ag/Cu as nanoparticles, were identified. TFMs released high levels of Cu (35,900-60,200 µg·L-1), Zn (2340-2380 µg·L-1), and MPs (4528-10,640 particles/piece). Metals associated with nanoparticles leached by face masks did not present any antimicrobial activity against P. aeruginosa. Our study suggests that TFMs may leach large amounts of polluting nano/micromaterials in aquatic environments with potential toxicological effects on organisms.

Effect of quorum sensing molecules and natamycin on biofilms of Candida tropicalis and other yeasts isolated from industrial juice filtration membranes.

AIMS: Cells limit the cell number of dense biofilms by releasing self-inhibitory molecules. Here, we aim to assess the effectiveness of yeast quorum sensing (QS) molecules and the antifungal agent natamycin against yeast biofilms of strains commonly isolated from fruit juice ultrafiltration membranes. METHODS AND RESULTS: Yeast QS molecules, such as tyrosol, 2-phenylethanol and farnesol, were detected by solvent extraction and HS-SPME GC-MS in Candida tropicalis cultures. The effect of QS molecules on mono- and multispecies biofilms formed by Rhodotorula mucilaginosa, C. tropicalis, Candida krusei and Candida kefyr was evaluated by plate count and epifluorescence microscopy. Farnesol caused a decrease in cell number and disrupted mono- and multispecies yeast biofilms during adhesion (0·6 mmol l-1 ). 2-phenyl ethanol 1·2 mmol l-1 stimulated biofilm density and increased cell number in both mono- and multispecies biofilms, while tyrosol did not show effects when tested against C. tropicalis biofilms (0·05-1·2 mmol l-1 ). Natamycin caused a strong decrease in cell number and disruption of biofilm structure in C. tropicalis biofilms at high concentrations (0·3-1·2 mmol l-1 ). The combination of farnesol 0·6 mmol l-1 and natamycin at 0·01 mmol l-1 , the maximum concentration of natamycin accepted for direct addition into fruit juices, effectively reduced cell counts and disrupted the structure of C. tropicalis biofilms. CONCLUSION: Farnesol 0·6 mmol l-1 significantly increased the inhibition exerted by natamycin 0·01 mmol l-1 (~5 ppm) reducing biofilm development from juice on stainless steel surfaces. SIGNIFICANCE AND IMPACT OF THE STUDY: These results support the use of QS molecules as biofilm inhibitors in beverages and would certainly inspire the design of novel preservative and cleaning products for the food industry based on combinatory approaches.

Immobilization of antibacterial metallic cations (Ga3+, Zn2+ and Co2+) in a polypyrrole coating formed on Nitinol.

Gallium, zinc and cobalt species were immobilized in hollow rectangular-sectioned microtubes of polypyrrole (PPy) electrosynthesized on Nitinol (NiTi) alloy by means of two different methods. One of them involved the immobilization after the PPy electropolymerization and the other one during the electrosynthesis process. The antibacterial activity of the coating against Escherichia coli (E. coli) was evaluated and the best results were obtained with gallium species. Characterization results demonstrated that gallium is incorporated into the PPy matrix as Ga3+ ions. The PPy film with gallium species incorporated during the electropolymerization exhibited a good corrosion protection performance.

Immobilization and release of copper species from a microstructured polypyrrole matrix.

Copper species immobilization in hollow rectangular-sectioned microtubes of polypyrrole (PPy) electrosynthesized on 316L stainless steel was carried out using two different methods. One of them involved the immobilization after the PPy electropolymerization and the other one during the electrosynthesis process. The electrodes modified with copper species were rotated at different speeds in well water under open-circuit potential conditions. The release of copper species from the PPy matrix and the antibacterial activity against Escherichia coli were analyzed. The obtained results demonstrate that the amount of copper species released as well as the bactericidal effects against E. coli increases with rotation speed. The PPy coating modified with copper species after the electropolymerization reaction exhibited the best performance in terms of antibacterial activity and corrosion protection. These electrodes were tested in a lab-scale continuous flow system for well water disinfection.

Silver deposition on polypyrrole films electrosynthesised onto Nitinol alloy. Corrosion protection and antibacterial activity.

The electrosynthesis of polypyrrole films onto Nitinol from sodium salicylate solutions of different concentrations is reported. The morphology and corrosion protection properties of the resulting coatings were examined and they both depend on the sodium salicylate concentration. The immobilisation of silver species in PPy films constituted by hollow rectangular microtubes was studied as a function of the polymer oxidation degree. The highest amount of silver was deposited when the coated electrode was prepolarised at -1.00V (SCE) before silver deposition, suggesting an increase in the amount of non-oxidised segments in the polymer. Finally, the antibacterial activity of the coating against the Gram positive Staphylococcus aureus and Staphylococcus epidermidis bacteria was evaluated. Both strains resulted sensitive to the modified coatings, obtaining a slightly better result against S. aureus.

Dual-species relations between Candida tropicalis isolated from apple juice ultrafiltration membranes, with Escherichia coli O157:H7 and Salmonella sp.

AIMS: The objective of this study was to determine the interactions between common spoilage yeast, Candida tropicalis, isolated from ultrafiltration membranes, and Escherichia coli O157:H7 and Salmonella sp. on stainless steel surfaces. METHODS AND RESULTS: Single and dual-species attachment assays were performed on stainless steel at 25°C using apple juice as culture medium. The growth of Salmonella sp. rose when it was co-cultivated with C. tropicalis in dual biofilms at 16 and 24 h; the same effect was observed for E. coli O157:H7 at 24 h. The colonization of C. tropicalis on stainless steel surfaces was reduced when it was co-cultivated with both pathogenic bacteria, reducing C. tropicalis population by at least 1.0 log unit. Visualization by SEM demonstrated that E. coli O157:H7 and Salmonella sp. adhere closely to hyphal elements using anchorage structures to attach to the surface and other cells. CONCLUSIONS: These results suggest a route for potential increased survival of pathogens in juice processing environments. These support the notion that the species involved interact in mixed yeast-bacteria communities favouring the development of bacteria over yeast. SIGNIFICANCE AND IMPACT OF THE STUDY: This study support the plausibility that pathogen interactions with strong biofilm forming members of spoilage microbiota, such as C. tropicalis, might play an important role for the survival and dissemination of E. coli O157:H7 and Salmonella sp. in food-processing environments.