Liposomal formulations for treating lysosomal storage disorders.

Lysosomal storage disorders (LSD) are a group of rare life-threatening diseases caused by a lysosomal dysfunction, usually due to the lack of a single enzyme required for the metabolism of macromolecules, which leads to a lysosomal accumulation of specific substrates, resulting in severe disease manifestations and early death. There is currently no definitive cure for LSD, and despite the approval of certain therapies, their effectiveness is limited. Therefore, an appropriate nanocarrier could help improve the efficacy of some of these therapies. Liposomes show excellent properties as drug carriers, because they can entrap active therapeutic compounds offering protection, biocompatibility, and selectivity. Here, we discuss the potential of liposomes for LSD treatment and conduct a detailed analysis of promising liposomal formulations still in the preclinical development stage from various perspectives, including treatment strategy, manufacturing, characterization, and future directions for implementing liposomal formulations for LSD.

Engineering pH-Sensitive Stable Nanovesicles for Delivery of MicroRNA Therapeutics.

MicroRNAs (miRNAs) are small non-coding endogenous RNAs, which are attracting a growing interest as therapeutic molecules due to their central role in major diseases. However, the transformation of these biomolecules into drugs is limited due to their unstability in the bloodstream, caused by nucleases abundantly present in the blood, and poor capacity to enter cells. The conjugation of miRNAs to nanoparticles (NPs) could be an effective strategy for their clinical delivery. Herein, the engineering of non-liposomal lipid nanovesicles, named quatsomes (QS), for the delivery of miRNAs and other small RNAs into the cytosol of tumor cells, triggering a tumor-suppressive response is reported. The engineered pH-sensitive nanovesicles have controlled structure (unilamellar), size (<150 nm) and composition. These nanovesicles are colloidal stable (>24 weeks), and are prepared by a green, GMP compliant, and scalable one-step procedure, which are all unavoidable requirements for the arrival to the clinical practice of NP based miRNA therapeutics. Furthermore, QS protect miRNAs from RNAses and when injected intravenously, deliver them into liver, lung, and neuroblastoma xenografts tumors. These stable nanovesicles with tunable pH sensitiveness constitute an attractive platform for the efficient delivery of miRNAs and other small RNAs with therapeutic activity and their exploitation in the clinics.

Polylactide, Processed by a Foaming Method Using Compressed Freon R134a, for Tissue Engineering.

Fabricating polymeric scaffolds using cost-effective manufacturing processes is still challenging. Gas foaming techniques using supercritical carbon dioxide (scCO2) have attracted attention for producing synthetic polymer matrices; however, the high-pressure requirements are often a technological barrier for its widespread use. Compressed 1,1,1,2-tetrafluoroethane, known as Freon R134a, offers advantages over CO2 in manufacturing processes in terms of lower pressure and temperature conditions and the use of low-cost equipment. Here, we report for the first time the use of Freon R134a for generating porous polymer matrices, specifically polylactide (PLA). PLA scaffolds processed with Freon R134a exhibited larger pore sizes, and total porosity, and appropriate mechanical properties compared with those achieved by scCO2 processing. PLGA scaffolds processed with Freon R134a were highly porous and showed a relatively fragile structure. Human mesenchymal stem cells (MSCs) attached to PLA scaffolds processed with Freon R134a, and their metabolic activity increased during culturing. In addition, MSCs displayed spread morphology on the PLA scaffolds processed with Freon R134a, with a well-organized actin cytoskeleton and a dense matrix of fibronectin fibrils. Functionalization of Freon R134a-processed PLA scaffolds with protein nanoparticles, used as bioactive factors, enhanced the scaffolds' cytocompatibility. These findings indicate that gas foaming using compressed Freon R134a could represent a cost-effective and environmentally friendly fabrication technology to produce polymeric scaffolds for tissue engineering approaches.

Application of Quality by Design to the robust preparation of a liposomal GLA formulation by DELOS-susp method.

Fabry disease is a lysosomal storage disease arising from a deficiency of the enzyme α-galactosidase A (GLA). The enzyme deficiency results in an accumulation of glycolipids, which over time, leads to cardiovascular, cerebrovascular, and renal disease, ultimately leading to death in the fourth or fifth decade of life. Currently, lysosomal storage disorders are treated by enzyme replacement therapy (ERT) through the direct administration of the missing enzyme to the patients. In view of their advantages as drug delivery systems, liposomes are increasingly being researched and utilized in the pharmaceutical, food and cosmetic industries, but one of the main barriers to market is their scalability. Depressurization of an Expanded Liquid Organic Solution into aqueous solution (DELOS-susp) is a compressed fluid-based method that allows the reproducible and scalable production of nanovesicular systems with remarkable physicochemical characteristics, in terms of homogeneity, morphology, and particle size. The objective of this work was to optimize and reach a suitable formulation for in vivo preclinical studies by implementing a Quality by Design (QbD) approach, a methodology recommended by the FDA and the EMA to develop robust drug manufacturing and control methods, to the preparation of α-galactosidase-loaded nanoliposomes (nanoGLA) for the treatment of Fabry disease. Through a risk analysis and a Design of Experiments (DoE), we obtained the Design Space in which GLA concentration and lipid concentration were found as critical parameters for achieving a stable nanoformulation. This Design Space allowed the optimization of the process to produce a nanoformulation suitable for in vivo preclinical testing.

Impact of Chemical Composition on the Nanostructure and Biological Activity of α-Galactosidase-Loaded Nanovesicles for Fabry Disease Treatment.

Fabry disease is a rare lysosomal storage disorder characterized by a deficiency of α-galactosidase A (GLA), a lysosomal hydrolase. The enzyme replacement therapy administering naked GLA shows several drawbacks including poor biodistribution, limited efficacy, and relatively high immunogenicity in Fabry patients. An attractive strategy to overcome these problems is the use of nanocarriers for encapsulating the enzyme. Nanoliposomes functionalized with RGD peptide have already emerged as a good platform to protect and deliver GLA to endothelial cells. However, low colloidal stability and limited enzyme entrapment efficiency could hinder the further pharmaceutical development and the clinical translation of these nanoformulations. Herein, the incorporation of the cationic miristalkonium chloride (MKC) surfactant to RGD nanovesicles is explored, comparing two different nanosystems-quatsomes and hybrid liposomes. In both systems, the positive surface charge introduced by MKC promotes electrostatic interactions between the enzyme and the nanovesicles, improving the loading capacity and colloidal stability. The presence of high MKC content in quatsomes practically abolishes GLA enzymatic activity, while low concentrations of the surfactant in hybrid liposomes stabilize the enzyme without compromising its activity. Moreover, hybrid liposomes show improved efficacy in cell cultures and a good in vitro/in vivo safety profile, ensuring their future preclinical and clinical development.

Quercitrin Nanocoated Implant Surfaces Reduce Osteoclast Activity In Vitro and In Vivo.

In this study, the effect on osteoclast activity in vitro and in vivo of titanium implants that were coated with quercitrin was evaluated. Titanium surfaces were covalently coated with the flavonoid quercitrin. The effect of the surfaces on osteoclastogenesis was first tested in vitro on RAW264.7 cells that were supplemented with receptor activator of nuclear factor kappa-B ligand (RANKL) to generate osteoclast-like cells by tartrate-resistant acid phosphatase (TRAP) inmunostaining after five days of culture, and by analysis of the mRNA expression levels of markers related to bone resorption after seven days of culture. A rabbit tibial model was used to evaluate the in vivo biological response to the implant surfaces after eight weeks of healing, analyzing the lactate dehydrogenase (LDH) and the alkaline phosphatase (ALP) activities in the wound fluid that were present at the implant interface and the peri-implant bone mRNA expression levels of several markers related to inflammation, bone resorption and osteoblast-osteoclast interaction. No differences between groups and control surfaces were found in the wound fluid analyses. Moreover, quercitrin implant surfaces significantly decreased the expression of osteoclast related genes in vitro (Trap, CalcR, Ctsk, H⁺ATPase, Mmp9) and in vivo (Ctsk, H⁺ATPase, Mmp9) as well as the expression of RankL in vivo. Moreover, quercitrin surfaces were not cytotoxic for the cells. Thus, quercitrin implant surfaces were biocompatible and decreased osteoclastogenesis in vitro and in vivo. This could be used to improve the performance of dental implants.

Pressure-Responsive, Surfactant-Free CO2-Based Nanostructured Fluids.

Microemulsions are extensively used in advanced material and chemical processing. However, considerable amounts of surfactant are needed for their formulation, which is a drawback due to both economic and ecological reasons. Here, we describe the nanostructuration of recently discovered surfactant-free, carbon dioxide (CO2)-based microemulsion-like systems in a water/organic-solvent/CO2 pressurized ternary mixture. "Water-rich" nanodomains embedded into a "water-depleted" matrix have been observed and characterized by the combination of Raman spectroscopy, molecular dynamics simulations, and small-angle neutron scattering. These single-phase fluids show a reversible, pressure-responsive nanostructuration; the "water-rich" nanodomains at a given pressure can be instantaneously degraded/expanded by increasing/decreasing the pressure, resulting in a reversible, rapid, and homogeneous mixing/demixing of their content. This pressure-triggered responsiveness, together with other inherent features of these fluids, such as the absence of any contaminant in the ternary mixture (e.g., surfactant), their spontaneous formation, and their solvation capability (enabling the dissolution of both hydrophobic and hydrophilic molecules), make them appealing complex fluid systems to be used in molecular material processing and in chemical engineering.

Direct Covalent Grafting of Phytate to Titanium Surfaces through Ti-O-P Bonding Shows Bone Stimulating Surface Properties and Decreased Bacterial Adhesion.

Myo-inositol hexaphosphate, also called phytic acid or phytate (IP6), is a natural molecule abundant in vegetable seeds and legumes. Among other functions, IP6 inhibits bone resorption. It is adsorbed on the surface of hydroxyapatite, inhibiting its dissolution and decreasing the progressive loss of bone mass. We present here a method to directly functionalize Ti surfaces covalently with IP6, without using a cross-linker molecule, through the reaction of the phosphate groups of IP6 with the TiO2 layer of Ti substrates. The grafting reaction consisted of an immersion in an IP6 solution to allow the physisorption of the molecules onto the substrate, followed by a heating step to obtain its chemisorption, in an adaptation of the T-Bag method. The reaction was highly dependent on the IP6 solution pH, only achieving a covalent Ti-O-P bond at pH 0. We evaluated two acidic pretreatments of the Ti surface, to increase its hydroxylic content, HNO3 30% and HF 0.2%. The structure of the coated surfaces was characterized by X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, and ellipsometry. The stability of the IP6 coating after three months of storage and after sterilization with γ-irradiation was also determined. Then, we evaluated the biological effect of Ti-IP6 surfaces in vitro on MC3T3-E1 osteoblastic cells, showing an osteogenic effect. Finally, the effect of the surfaces on the adhesion and biofilm viability of oral microorganisms S. mutans and S. sanguinis was also studied, and we found that Ti-IP6 surfaces decreased the adhesion of S. sanguinis. A surface that actively improves osseointegration while decreasing the bacterial adhesion could be suitable for use in bone implants.

Quercitrin-nanocoated titanium surfaces favour gingival cells against oral bacteria.

Many dental implants fail due to the infection and inflammation that walk hand in hand with poor healing and soft tissue integration. Titanium surfaces were nanocoated with quercitrin, a natural flavonoid, with the aim to improve soft tissue integration and increase dental implants success. Streptococcus mutans attachment and biofilm formation was analysed. Then, the anti-inflammatory properties and the potential of quercitrin-nanocoated surfaces to boost soft tissue regeneration were tested using human gingival fibroblasts. An inflammatory situation was mimicked using interleulin-1-beta. We found that quercitrin-nanocoated surfaces decreased initial bacterial adhesion while increasing human gingival fibroblasts attachment. Furthermore, quercitrin-nanocoated Ti increased collagen mRNA levels and decreased matrix metalloproteinase-1/tissue inhibitor of metalloproteinanse-1 mRNA ratio, which is related to a reduced metalloproteinase-mediated collagen degradation, while also decreasing the pro-inflammatory prostaglandin E2 release under basal and inflammatory conditions. These results suggest that quercitrin-nanocoated surfaces could enhance the soft tissue integration and increase dental implants success.

Bioinspired Quercitrin Nanocoatings: A Fluorescence-Based Method for Their Surface Quantification, and Their Effect on Stem Cell Adhesion and Differentiation to the Osteoblastic Lineage.

Polyphenol-based coatings have several potential applications in medical devices, such as cardiovascular stents, contrast agents, drug delivery systems, or bone implants, due to the multiple bioactive functionalities of these compounds. In a previous study, we fabricated titanium surfaces functionalized with flavonoids through covalent chemistry, and observed their osteogenic, anti-inflammatory, and antifibrotic properties in vitro. In this work, we report a fluorescence-based method for the quantification of the amount of flavonoid grafted onto the surfaces, using 2-aminoethyl diphenylborinate, a boronic ester that spontaneously forms a fluorescent complex with flavonoids. The method is sensitive, simple, rapid, and easy to perform with routine equipment, and could be applied to determine the surface coverage of other plant-derived polyphenol-based coatings. Besides, we evaluated an approach based on reductive amination to covalently graft the flavonoid quercitrin to Ti substrates, and optimized the grafting conditions. Depending on the reaction conditions, the amount of quercitrin grafted was between 64 ± 10 and 842 ± 361 nmol on 6.2 mm Ti coins. Finally, we evaluated the in vitro behavior of bone-marrow-derived human mesenchymal stem cells cultured on the quercitrin nanocoated Ti surfaces. The surfaces functionalized with quercitrin showed a faster stem cell adhesion than control surfaces, probably due to the presence of the catechol groups of quercitrin on the surfaces. A rapid cell adhesion is crucial for the successful performance of an implant. Furthermore, quercitrin-nanocoated surfaces enhanced the mineralization of the cells after 21 days of cell culture. These results indicate that quercitrin nanocoatings could promote the rapid osteointegration of bone implants.

Flavonoid-modified surfaces: multifunctional bioactive biomaterials with osteopromotive, anti-inflammatory, and anti-fibrotic potential.

Flavonoids are small polyphenolic molecules of natural origin with antioxidant, anti-inflammatory, and antibacterial properties. Here, a bioactive surface based on the covalent immobilization of flavonoids taxifolin and quercitrin on titanium substrates is presented, using (3-aminopropyl)triethoxysilane (APTES) as coupling agent. FTIR and XPS measurements confirm the grafting of the flavonoids to the surfaces. Using 2-aminoethyl diphenylborinate (DPBA, a flavonoid-specific dye), the modified surfaces are imaged by fluorescence microscopy. The bioactivity of the flavonoid-modified surfaces is evaluated in vitro with human umbilical cord derived mesenchymal stem cells (hUC-MSCs) and human gingival fibroblasts (HGFs) and compared to that of simple flavonoid coatings prepared by drop casting. Flavonoid-modified surfaces show anti-inflammatory and anti-fibrotic potential on HGF. In addition, Ti surfaces covalently functionalized with flavonoids promote the differentiation of hUC-MSCs to osteoblasts--enhancing the expression of osteogenic markers, increasing alkaline phosphatase activity and calcium deposition; while drop-casted surfaces do not. These findings could have a high impact in the development of advanced implantable medical devices like bone implants. Given the broad range of bioactivities of flavonoid compounds, these surfaces are ready to be explored for other biomedical applications, e.g., as stent surface or tumor-targeted functionalized nanoparticles for cardiovascular or cancer therapies.

Multifunctional nanovesicle-bioactive conjugates prepared by a one-step scalable method using CO2-expanded solvents.

The integration of therapeutic biomolecules, such as proteins and peptides, in nanovesicles is a widely used strategy to improve their stability and efficacy. However, the translation of these promising nanotherapeutics to clinical tests is still challenged by the complexity involved in the preparation of functional nanovesicles and their reproducibility, scalability, and cost production. Here we introduce a simple one-step methodology based on the use of CO2-expanded solvents to prepare multifunctional nanovesicle-bioactive conjugates. We demonstrate high vesicle-to-vesicle homogeneity in terms of size and lamellarity, batch-to-batch consistency, and reproducibility upon scaling-up. Importantly, the procedure is readily amenable to the integration/encapsulation of multiple components into the nanovesicles in a single step and yields sufficient quantities for clinical research. The simplicity, reproducibility, and scalability render this one-step fabrication process ideal for the rapid and low-cost translation of nanomedicine candidates from the bench to the clinic.

UV-irradiated 7-dehydrocholesterol coating on polystyrene surfaces is converted to active vitamin D by osteoblastic MC3T3-E1 cells.

The aim of the present study was to determine the effects of UV irradiation on the conversion of 7-dehydrocholesterol (7-DHC), which has been coated onto a polystyrene surface, to cholecalciferol (D3), and the resulting effect on the formation of vitamin D (1,25-D3) by MC3T3-E1 cells. The changes in gene expression of the enzymes regulating its hydroxylation, Cyp27b1 and Cyp27a1, were monitored as well as the net effect of the UV-treated 7-DHC coating on cell viability and osteoblast differentiation. MC3T3-E1 cells were found to express the enzymes required for synthesizing active 1,25-D3, and we found a dose-dependent increase in the production of both 25-D3 and 1,25-D3 levels for UV-activated 7-DHC samples unlike UV-untreated ones. Cell viability revealed no cytotoxic effect for any of the treatments, but only for the highest dose of 7-DHC (20 nmol per well) that was UV-irradiated. Furthermore, osteoblast differentiation was increased in cells treated with some of the higher doses of 7-DHC when UV-irradiated, as shown by collagen-I, osterix and osteocalcin relative mRNA levels. The conversion of 7-DHC to preD3 exogenously by UV irradiation and later to 25-D3 by MC3T3-E1 cells was determined for the optimum 7-DHC dose (0.2 nmol per well), i.e. 8.6 ± 0.7% of UV-activated 7-DHC was converted to preD3 and 6.7 ± 2.8% of preD3 was finally converted to 25-D3 under the conditions studied. In conclusion, we demonstrate that an exogenous coating of 7-DHC, when UV-irradiated, can be used to endogenously produce active vitamin D. We hereby provide the scientific basis for UV-activated 7-DHC coating as a feasible approach for implant therapeutics focused on bone regeneration.

Liposomes and other vesicular systems: structural characteristics, methods of preparation, and use in nanomedicine.

Vesicular systems, especially liposomes, have generated a great deal of interest as intelligent materials for the delivery of bioactive molecules since they can be used as sensitive containers that respond to external stimuli, such as pressure, pH, temperature, or concentration changes in the medium, triggering modifications in their supramolecular structure. The control of the nanostructure-particle size and size distribution, membrane morphology, and supramolecular organization-of these self-assembled systems is of profound importance for their application in drug delivery and the discovery of new nanomedicines. This chapter will describe the chemical structure of vesicles and their pharmacological properties, conventional and new vesicle preparation methods and structural characterization, as well as their use in the rational design and fabrication of nanomedicines.

Versatile chemoselectivity in Ni-catalyzed multiple bond carbonylations and cyclocarbonylations in CO(2)-expanded liquids.

Selective mono or double carbonylations could be achieved by using CO(2)-expanded liquids in [2 + 2 + 1] carbonylative reactions of alkenes or acetylenes with allyl bromides catalyzed by Ni(i).

Efecto de la concanavalina A en el cultivo del fitopatógeno: ustilago maydis / Effect of concanavalin A in the culture of the phytopatogen: ustilago maydis

El efecto de la adición de la lectina Concanavalina A al cultivo del hongo Ustilago maydis es examinado para contribuir al entendimiento de los mecanismos de reconocimiento e infección entre hongos y plantas. La cinética de crecimiento del hongo en cultivo mostró que la adición de Con A tiene un discreto efecto activador sobre las basidiosporas a partir de la 9h de incubación. Por otra parte, la unión de Con A a las basidiosporas causó diversos cambios morfológicos, agregación, múltiples ramificaciones y una incremantada capacidad de gemación. La unión de Con A a las basidiosporas fue evidencia utilizando un conjugado fluorescente de la lectina (Alexa-flúor), observándose mayor intensidad de fluorescencia en las puntas y zonas de gemación de las basidiosporas, lo que sugiere la distribución heterógena de estructuras sacarídicas (receptores) sobre la superficie de la pared celular del hongo durante el crecimiento. Los efectos de la adición de Con A en el cultivo del hongo se inhiben al incubar previamente la lectina con &-manopiranosa.