Micromixing within microfluidic devices: Fundamentals, design, and fabrication.

As one of the hot spots in the field of microfluidic chip research, micromixers have been widely used in chemistry, biology, and medicine due to their small size, fast response time, and low reagent consumption. However, at low Reynolds numbers, the fluid motion relies mainly on the diffusive motion of molecules under laminar flow conditions. The detrimental effect of laminar flow leads to difficulties in achieving rapid and efficient mixing of fluids in microchannels. Therefore, it is necessary to enhance fluid mixing by employing some external means. In this paper, the classification and mixing principles of passive (T-type, Y-type, obstructed, serpentine, three-dimensional) and active (acoustic, electric, pressure, thermal, magnetic field) micromixers are reviewed based on the presence or absence of external forces in the micromixers, and some experiments and applications of each type of micromixer are briefly discussed. Finally, the future development trends of micromixers are summarized.

Recent advances in optically induced di-electrophoresis and its biomedical applications.

The development of the micro/nano science and technology has promoted the evolvement of human civilization tremendously. The advancement of the micro/nano science and technology highly depends on the progress of the micro/nano manipulation techniques, and the micro/nano-scaled manipulation level is the critical sign of the micro/nano science and technology. This review, aimed at the demand and the challenge of the micro/nano material and biomedical fields and related to the scientific issues and implementation techniques of the optically induced di-electrophoresis (ODEP). We explained its working principle, manipulating method, and influencing factors of ODEP force to a certain extent. A number of application fields based-ODEP technology and specific applications so far are summarized and reviewed. Finally, some perspectives are provided on current development trends, future research directions, and challenges of ODEP.

Recent advances in acoustic microfluidics and its exemplary applications.

Acoustic-based microfluidics has been widely used in recent years for fundamental research due to its simple device design, biocompatibility, and contactless operation. In this article, the basic theory, typical devices, and technical applications of acoustic microfluidics technology are summarized. First, the theory of acoustic microfluidics is introduced from the classification of acoustic waves, acoustic radiation force, and streaming flow. Then, various applications of acoustic microfluidics including sorting, mixing, atomization, trapping, patterning, and acoustothermal heating are reviewed. Finally, the development trends of acoustic microfluidics in the future were summarized and looked forward to.

Atomic Force Microscopy for Tumor Research at Cell and Molecule Levels.

Tumors have posed a serious threat to human life and health. Researchers can determine whether or not cells are cancerous, whether the cancer cells are invasive or metastatic, and what the effects of drugs are on cancer cells by the physical properties such as hardness, adhesion, and Young's modulus. The atomic force microscope (AFM) has emerged as a key important tool for biomechanics research on tumor cells due to its ability to image and collect force spectroscopy information of biological samples with nano-level spatial resolution and under near-physiological conditions. This article reviews the existing results of the study of cancer cells with AFM. The main foci are the operating principle of AFM and research advances in mechanical property measurement, ultra-microtopography, and molecular recognition of tumor cells, which allows us to outline what we do know it in a systematic way and to summarize and to discuss future directions.

Microlenses arrays: Fabrication, materials, and applications.

Microlenses have become an indispensable optical element in many optical systems. The advancement of technology has led to a wider variety of microlenses fabrication methods, but these methods suffer from, more or less, some limitations. In this article, we review the manufacturing technology of microlenses from the direct and indirect perspectives. First, we present several fabrication methods and their advantages and disadvantages are discussed. Then, we discuss the commonly used materials for fabricating microlenses and the applications of microlenses in various fields. Finally, we point out the prospects for the future development of microlenses and their fabrication methods.

Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development.

Three-dimensional multicellular spheroids (MCSs) have received extensive attention in the field of biomedicine due to their ability to simulate the structure and function of tissues in vivo more accurately than traditional in vitro two-dimensional models and to simulate cell-cell and cell extracellular matrix (ECM) interactions. It has become an important in vitro three-dimensional model for tumor research, high-throughput drug screening, tissue engineering, and basic biology research. In the review, we first summarize methods for MCSs generation and their respective advantages and disadvantages and highlight the advances of hydrogel and microfluidic systems in the generation of spheroids. Then, we look at the application of MCSs in cancer research and other aspects. Finally, we discuss the development direction and prospects of MCSs.

4D Printing: A Review on Recent Progresses.

Since the late 1980s, additive manufacturing (AM), commonly known as three-dimensional (3D) printing, has been gradually popularized. However, the microstructures fabricated using 3D printing is static. To overcome this challenge, four-dimensional (4D) printing which defined as fabricating a complex spontaneous structure that changes with time respond in an intended manner to external stimuli. 4D printing originates in 3D printing, but beyond 3D printing. Although 4D printing is mainly based on 3D printing and become an branch of additive manufacturing, the fabricated objects are no longer static and can be transformed into complex structures by changing the size, shape, property and functionality under external stimuli, which makes 3D printing alive. Herein, recent major progresses in 4D printing are reviewed, including AM technologies for 4D printing, stimulation method, materials and applications. In addition, the current challenges and future prospects of 4D printing were highlighted.

Recent advances in microfluidic technologies for separation of biological cells.

Cell separation has always been a key topic in academic research, especially in the fields of medicine and biology, due to its significance in diagnosis and treatment. Accurate, high-throughput and non-invasive separation of individual cells is key to driving the development of biomedicine and cellular biology. In recent years, a series of researches on the use of microfluidic technologies for cell separation have been conducted to solve bio-related problems. Hence, we present here a comprehensive review on the recent developments of microfluidic technologies for cell separation. In this review, we discuss several cell separation methods, mainly including: physical and biochemical method, their working principles as well as their practical applications. We also analyze the advantages and disadvantages of each method in detail. In addition, the current challenges and future prospects of microfluidic-based cell separation were discussed.

Dynamically directing cell organization via micro-hump structure patterned cell-adhered interfaces.

Cell adhesion plays an important role in cell communication, organ formation and tissue maintenance. Spatial microstructure patterning has the capability to regulate cell functions such as cell adhesion and cell proliferation as well as cellular mechanical properties. In this study, we present a simple method to fabricate micro-hump patterned interfaces based on electrohydrodynamic jet (E-jet) printing to control and direct cell organization. Micro-hump structures were rapidly fabricated by E-jet printing and arbitrary cell patterns can be achieved by selective cell adhesion induced by this surface topography. Furthermore, cellular mechanical properties were regulated by changing the density of microstructures. The technique we proposed could dynamically direct cell organization in a controlled manner, providing help for exploring the fundamental mechanism of cell adhesion and sensing.