ABSTRACT
Tigernut has been recognized as a promising resource for edible oil and starch. However, the research on the quality characteristics of tigernut from different regions is lagging behind, which limits the application of tigernut in food industry. Tigernut tubers were obtained from six major growing regions in China, and the physicochemical properties of their main components, oil and starch, were characterized. Tigernut tubers from Baoshan contained the most oil (30.12%), which contained the most ß-carotene (130.4 µg/100 g oil) due to high average annual temperature. Gas chromatography analysis and fingerprint analysis results indicated that tigernut oil (TNO) consists of seven fatty acids, of which oleic acid is the major component. Changchun TNO contained the least total tocopherols (6.04 mg/100 g oil) due to low average annual temperature. Tigernut tubers from Chifeng (CF) contained the most starch (34.85%) due to the large diurnal temperature range. Xingtai starch contained the most amylose (28.4%). Shijiazhuang starch showed the highest crystallinity (19.5%). Anyang starch had the highest pasting temperature (76.0°C). CF starch demonstrated superior freeze-thaw stability (syneresis: 50%) due to low mean annual precipitation. The results could be further applied to support tigernut industries and relevant researchers that looks for geographical origin discrimination and improvements on tigernut quality, with unique physicochemical and technological properties.
Subject(s)
Cyperus , Starch , Starch/chemistry , Cyperus/chemistry , Plant Oils/chemistry , Vegetables , ChinaABSTRACT
This study was to explore the internal reasons for the changes in oil absorption performance of tigernut starch (TS) by revealing the high-temperature induced variations of structural and functional properties of TS. The results showed that as the temperature increased from 80 °C to 140 °C, the degree of starch gelatinization increased, while the proportion of double helix structures, the total proportion of B1 and B2 chains, the relative crystallinity and the molecular weight decreased, accompanied by the fragmentation and swelling of TS granules. The oxidation of tigernut oil (TNO) led to a decrease in oil density and an increase in total polar component content. These phenomena could result in an increase of oil absorption capacity of TS and starch-lipid complex index. With further increase in temperature from 170 °C to 200 °C, the disruption of the crystalline structure and chain structure increased, resulting in the melting and disintegration of TS granules. This caused a decrease in the starch-oil contact area and capillary absorption of TNO by the TS granules. The results will contribute to revealing the effect of high-temperature induced changes in the structural and functional properties of TS on its oil absorption properties.
ABSTRACT
If the tigernut meal left after oil extraction is used as a material for starch resources instead of being wasted, the industrial value of tigernut would be improved. Thus, we investigated the effect of extrusion before oil extraction on the yield, structure and function of starches within tigernut meals (TMS). Compared with the yield of native starch, the yield of TMS-130-11 (barrel temperature: 130 °C; feed moisture: 11 %) was increased by 1.97 %, and that of TMS-140-11 (barrel temperature: 140 °C; feed moisture: 11 %) was decreased by 7.82 %. The starches cannot be obtained when the barrel temperature is above 140 °C with 11 % feed moisture. Extrusion slightly decreased the relative crystallinity and increased the ratio of B2-chains in amylopectin. These changes resulted in reductions in peak viscosity while improving the elastic properties of the starch gel. These results will provide useful information regarding the use of starch isolated from tigernut meal.
Subject(s)
Amylopectin , Starch , Amylopectin/chemistry , Amylose , Meals , Starch/chemistry , Temperature , ViscosityABSTRACT
In the present work, effects of reaction temperature, reactant concentration, catalyst loading, and rotation speed on the kinetics of sesamin conversion in a sesame oil system were studied by using citric acid loading on Hß zeolite (CA/Hß) as a catalyst. A kinetic model was built for sesamin conversion. The kinetic model fits correctly the experimental concentration of sesamin and asarinin ( R S ⢠e ⢠s ⢠a ⢠m ⢠i ⢠n 2 = 0.93 and R A ⢠s ⢠a ⢠r ⢠i ⢠n ⢠i ⢠n 2 = 0.97). The sesamin conversion is an endothermic reaction (â³H rIso = 3 4.578kJ/mol). The CA/Hß catalyst could be easily regenerated by calcination, and there was no obvious loss of catalytic activity when reused. Knowledge of the sesamin conversion is of great significance for guiding production and improving the value and nutrition of sesame oil. In a word, this study lays the foundation for the scale-up of the production of asarinin from sesame oil using CA/Hß as the catalyst.
ABSTRACT
The objective of the present investigation was to extract pectic polysaccharides from sesame seed hull and to determine their physicochemical and functional characteristics. The pectic polysaccharides in the seed hull were extracted with HCl and then collected at three ethanol concentrations of 30% (SSP30), 50% (SSP50), and 90% (SSP90). We found that SSP30 represented 75.6% of the total polysaccharides, and that it contained 76.39% galacturonic acid, with many HG domains and few short side chains in the RG-I domains. SSP30 exhibited the strongest hydroxyl radical scavenging activity among the three fractions, and was better able to stabilize the emulsions. Higher Mw pectic polysaccharides were firstly precipitated at lower ethanol concentrations, and the Mw of the precipitated pectic polysaccharides decreased with increasing ethanol concentration. These results provide important information on the structure and functional characteristics of sesame hull polysaccharides. This information can contribute to the future development of sesame hull polysaccharides for industrial purposes.
