Dissolved organic matter in bovine slaughterhouse wastewater using fluorescence spectroscopy associated with CP/PARAFAC and PCA methods.

In this work, we evaluated the potential application of fluorescence spectroscopy, associated with the canonical polyadic/parallel factor analysis and principal component analysis, to monitor the dissolved organic matter (DOM) generated from a slaughterhouse industry. During the monitoring process, we analyzed the residual water at the entrance and exit sites of the slaughterhouse effluent treatment as well as downstream and upstream the effluent receiving water body of a local river. The results revealed that the fluorescence analysis was able to identify proteins, chlorophylls, and humic substances at the entrance and exit sites of the slaughterhouse treatment plant and humic substances at the river water bodies. Our data also demonstrated that the industrial effluent discharged into the river did not impact the receiving water body quality as determined by the biological and humification indices obtained by fluorescence analysis, which was confirmed by conventional physicochemical analysis. In summary, the present findings indicate that fluorescence spectroscopy, in association with multivariate analysis, can be successfully applied as an analytical tool for evaluating the quality of DOM in slaughterhouse wastewater.

Synthesis and Characterization of N and Fe-Doped TiO2 Nanoparticles for 2,4-Dimethylaniline Mineralization.

The present study aimed to evaluate the feasibility of developing low-cost N- and Fe-doped TiO2 photocatalysts for investigating the mineralization of 2,4-dimethylaniline (2,4-DMA). With a single anatase phase, the photocatalysts showed high thermal stability with mass losses of less than 2%. The predominant oxidative state is Ti4+, but there is presence of Ti3+ associated with oxygen vacancies. In materials with N, doping was interstitial in the NH3/NH4+ form and for doping with Fe, there was a presence of Fe-Ti bonds (indicating substitutional occupations). With an improved band gap energy from 3.16 eV to 2.82 eV the photoactivity of the photocatalysts was validated with an 18 W UVA lamp (340-415 nm) with a flux of 8.23 × 10-6 Einstein s-1. With a size of only 14.45 nm and a surface area of 84.73 m2 g-1, the photocatalyst doped with 0.0125% Fe mineralized 92% of the 2,4-DMA in just 180 min. While the 3% N photocatalyst with 12.27 nm had similar performance at only 360 min. Factors such as high surface area, mesoporous structure and improved Ebg, and absence of Fe peak in XPS analysis indicate that doping with 0.0125% Fe caused a modification in TiO2 structure.

Application of Optical Fluorescence Spectroscopy for Studying Bee Abundance in Tropaeolum majus L. (Tropaeolaceae).

Tropaeolum majus L. species produce flowers with all sorts of colors, from yellow to red. This work aimed to apply optical fluorescence spectroscopy to study bee abundance in T. majus, answering the following questions: (1) do corolla temperature and weather conditions affect the abundance of visiting bee species? (2) do flower color and corolla fluorescence affect the abundance of visiting bee species? (3) do red flowers attract more visiting bees? (4) is there a relationship between bee visits and flower compounds? The bee species Apis mellifera, Paratrigona lineata, and Trigona spinipes were the most observed in T. majus flowers. The latter was more active in the morning and preferred orange and yellow flowers. These colors also had higher temperatures and fluorescence emissions than did the red ones and those with yellow-red and orange-red nectar guides. Orange flowers emitted a broadband UV spectrum (between 475 and 800 nm). This range might be due to compounds such as hydroxycinnamic acid, flavonols, isoflavonoids, flavones, phenolic acid, and chlorophyll. Extracts from different T. majus corolla colors showed that flowers emit specific fluorescent signals, mainly related to bee color vision and learning, thus acting as a means of communication between bees and flowers. In this way, this information evidences the interaction between bees and T. majus flowers, allowing conservation actions for pollinators.

Caryocar brasiliense Cambess. Pulp Oil Supplementation Reduces Total Cholesterol, LDL-c, and Non-HDL-c in Animals.

The fruit of Caryocar brasiliense Cambess. is a source of oil with active compounds that are protective to the organism. In our work, we analyzed the physicochemical characteristics and evaluated the effects of supplementation with C. brasiliense oil in an animal model. We characterized the oil by indices of quality and identity, optical techniques of absorption spectroscopy in the UV-Vis region and fluorescence, and thermogravimetry/derived thermogravimetry (TG/DTG). For the animal experiment, we utilized mice (Mus musculus) supplemented with lipidic source in different dosages. The results demonstrated that C. brasiliense oil is an alternative source for human consumption and presents excellent oxidative stability. Primarily, it exhibited oleic MFA (53.56%) and palmitic SFA (37.78%). The oil level of tocopherols and tocotrienols was superior to the carotenoids. The supplementation with C. brasiliense oil reduced the levels of total cholesterol, LDL-c, and non-HDL-c. Regarding visceral fats and adiposity index, the treatment synergically supplemented with olive oil and C. brasiliense oil (OO + CO) obtained the best result. Therefore, C. brasiliense oil is a high quality product for consumption. Its supplementation promotes beneficial effects mainly on the lipidic profile.

Data on mineral composition, fatty acids, oxidative stability, UV-VIS spectra and fluorescence emission of the Dersani® and Sunflower® oils used as a cicatrizing agent.

Dersani® and sunflower® oils are used by the Brazilian population as a cicatrizing agent. However, data on physical and chemical properties of these oils are scarce. In this data article on oils, we determined a total of 14 fatty acids composition by gas chromatography (GC), as well as quantifying the elements contents (Ca, K, Mg, Al, Cr, Fe, Mn, Na, P, Se and Zn) using inductively coupled plasma optical spectrometry (ICP OES). Rancimat method was used to determine the oxidative stability of the oils at temperature of 110 °C, in which the induction times for Dersani® and Sunflower® oils were 1.54 (±0.02) and 6.21 (±0.17) hours, respectively. Spectroscopic techniques UV-VIS and fluorescence were employed to obtain spectral datasets. UV-VIS and fluorescence spectroscopy reveals the presence of phenolic, tocopherols, tocotrienols and methyl-linolenate compounds in the oils. The determination of mineral and others contents in oils is an important criterion for the assessment of oil quality with regard to oxidation and their toxicity, properties and storage.

Fluorescence Spectroscopy Applied to Monitoring Biodiesel Degradation: Correlation with Acid Value and UV Absorption Analyses.

The techniques used to monitor the quality of the biodiesel are intensely discussed in the literature, partly because of the different oil sources and their intrinsic physicochemical characteristics. This study aimed to monitor the thermal degradation of the fatty acid methyl esters of Sesamum indicum L. and Raphanus sativus L. biodiesels (SILB and RSLB, resp.). The results showed that both biodiesels present a high content of unsaturated fatty acids, ∼84% (SILB) and ∼90% (RSLB). The SILB had a high content of polyunsaturated linoleic fatty acid (18 : 2), about 49%, and the oleic monounsaturated (18 : 1), ∼34%. On the other hand, RSLB presented a considerable content of linolenic fatty acid (18 : 3), ∼11%. The biodiesel samples were thermal degraded at 110°C for 48 hours, and acid value, UV absorption, and fluorescence spectroscopy analysis were carried out. The results revealed that both absorption and fluorescence presented a correlation with acid value as a function of degradation time by monitoring absorptions at 232 and 270 nm as well as the emission at 424 nm. Although the obtained correlation is not completely linear, a direct correlation was observed in both cases, revealing that both properties can be potentially used for monitoring the biodiesel degradation.

Changes in chlorophyll a fluorescence of glyphosate-tolerant soybean plants induced by glyphosate: in vivo analysis by laser-induced fluorescence spectroscopy.

A significant increase in the use of the herbicide glyphosate has generated many questions about its residual accumulation in the environment and possible damage to crops. In this study, changes in chlorophyll a (chl-a) fluorescence induced by glyphosate in three varieties of glyphosate-resistant soybean plants were determined with an in vivo analysis based on a portable laser-induced fluorescence system. Strong suppression of chl-a fluorescence was observed for all plants treated with the herbicide. Moreover, the ratio of the emission bands in the red and far-red regions (685 nm/735 nm) indicates that the application of glyphosate led to chlorophyll degradation. The results also indicated that the use of glyphosate, even at concentrations recommended by the manufacturer, suppressed chl-a fluorescence. In summary, this study shows that fluorescence spectroscopy can detect, in vivo, very early changes in the photosynthetic status of transgenic soybeans treated with this herbicide.