ABSTRACT
Calcific constrictive pericarditis is a very rare complication of systemic sclerosis. This is the first report of surgically treated calcific constrictive pericarditis in systemic sclerosis. A 53 years-old woman, affected by limited systemic sclerosis, had a diagnosis of calcific constrictive pericarditis. She had a medical history of congestive heart failure since 2022. The patient was treated with pericardiectomy. Via a median sternotomy, the pericardium was dissected and removed from the midline to the left phrenic nerve, thus freeing the heart. Three months after the pericardiectomy, there was a significant clinical improvement. The calcific evolution of chronic pericarditis is a rare complication of systemic sclerosis. This case represents, at best of our knowledge, the first report of calcific constrictive pericarditis, in systemic sclerosis, treated with pericardiectomy.
Subject(s)
Pericarditis, Constrictive , Pericarditis , Scleroderma, Systemic , Female , Humans , Middle Aged , Pericarditis, Constrictive/surgery , Pericarditis, Constrictive/complications , Pericardiectomy/adverse effects , Pericardium/surgery , Scleroderma, Systemic/complicationsABSTRACT
Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene-glycol-grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH-responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).
Subject(s)
Fibroins/chemistry , Capsules , Delayed-Action Preparations , Hydrogen-Ion ConcentrationABSTRACT
Diabetic foot ulcers (DFUs) are a major complication of diabetes, and there is a critical need to develop novel cell- and tissue-based therapies to treat these chronic wounds. Induced pluripotent stem cells (iPSCs) offer a replenishing source of allogeneic and autologous cell types that may be beneficial to improve DFU wound-healing outcomes. However, the biologic potential of iPSC-derived cells to treat DFUs has not, to our knowledge, been investigated. Toward that goal, we have performed detailed characterization of iPSC-derived fibroblasts from both diabetic and nondiabetic patients. Significantly, gene array and functional analyses reveal that iPSC-derived fibroblasts from both patients with and those without diabetes are more similar to each other than were the primary cells from which they were derived. iPSC-derived fibroblasts showed improved migratory properties in 2-dimensional culture. iPSC-derived fibroblasts from DFUs displayed a unique biochemical composition and morphology when grown as 3-dimensional (3D), self-assembled extracellular matrix tissues, which were distinct from tissues fabricated using the parental DFU fibroblasts from which they were reprogrammed. In vivo transplantation of 3D tissues with iPSC-derived fibroblasts showed they persisted in the wound and facilitated diabetic wound closure compared with primary DFU fibroblasts. Taken together, our findings support the potential application of these iPSC-derived fibroblasts and 3D tissues to improve wound healing.-Kashpur, O., Smith, A., Gerami-Naini, B., Maione, A. G., Calabrese, R., Tellechea, A., Theocharidis, G., Liang, L., Pastar, I., Tomic-Canic, M., Mooney, D., Veves, A., Garlick, J. A. Differentiation of diabetic foot ulcer-derived induced pluripotent stem cells reveals distinct cellular and tissue phenotypes.
Subject(s)
Cell Differentiation , Diabetic Foot/pathology , Induced Pluripotent Stem Cells/cytology , Animals , Cell Line , Cell Movement , Cell Proliferation , Diabetic Foot/metabolism , Extracellular Matrix Proteins/metabolism , Fibroblasts/cytology , Fibroblasts/metabolism , Glycosaminoglycans/metabolism , Humans , Induced Pluripotent Stem Cells/metabolism , Male , Mice , Mice, SCID , Phenotype , Wound Healing/geneticsABSTRACT
The interfacial shear strength between different layers in multilayered structures of layer-by-layer (LbL) microcapsules is a crucial mechanical property to ensure their robustness. In this work, we investigated the interfacial shear strength of modified silk fibroin ionomers utilized in LbL shells, an ionic-cationic pair with complementary ionic pairing, (SF)-poly-l-glutamic acid (Glu) and SF-poly-l-lysine (Lys), and a complementary pair with partially screened Coulombic interactions due to the presence of poly(ethylene glycol) (PEG) segments and SF-Glu/SF-Lys[PEG] pair. Shearing and adhesive behavior between these silk ionomer surfaces in the swollen state were probed at different spatial scales and pressure ranges by using functionalized atomic force microscopy (AFM) tips as well as functionalized colloidal probes. The results show that both approaches were consistent in analyzing the interfacial shear strength of LbL silk ionomers at different spatial scales from a nanoscale to a fraction of a micron. Surprisingly, the interfacial shear strength between SF-Glu and SF-Lys[PEG] pair with partially screened ionic pairing was greater than the interfacial shear strength of the SF-Glu and SF-Lys pair with a high density of complementary ionic groups. The difference in interfacial shear strength and adhesive strength is suggested to be predominantly facilitated by the interlayer hydrogen bonding of complementary amino acids and overlap of highly swollen PEG segments.
Subject(s)
Adhesives/chemistry , Fibroins/chemistry , Shear Strength , Capsules , Polyethylene Glycols/chemistry , Polyglutamic Acid/chemistry , Polylysine/chemistryABSTRACT
The response of human bone marrow-derived mesenchymal stem cells (hMSCs) encapsulated in three-dimensional (3D) charged protein hydrogels was studied. Combining silk fibroin (S) with recombinant human tropoelastin (E) or silk ionomers (I) provided protein composite alloys with tunable physicochemical and biological features for regulating the bioactivity of encapsulated hMSCs. The effects of the biomaterial charges on hMSC viability, proliferation and chondrogenic or osteogenic differentiation were assessed. The silk-tropoelastin or silk-ionomers hydrogels supported hMSC viability, proliferation and differentiation. Gene expression of markers for chondrogenesis and osteogenesis, as well as biochemical and histological analysis, showed that hydrogels with different S/E and S/I ratios had different effects on cell fate. The negatively charged hydrogels upregulated hMSC chondrogenesis or osteogenesis, with or without specific differentiation media, and hydrogels with higher tropoelastin content inhibited the differentiation potential even in the presence of the differentiation media. The results provide insight on charge-tunable features of protein-based biomaterials to control hMSC differentiation in 3D hydrogels, as well as providing a new set of hydrogels for the compatible encapsulation and utility for cell functions. Copyright © 2016 John Wiley & Sons, Ltd.
Subject(s)
Cell Differentiation , Cell Proliferation , Hydrogels/chemistry , Mesenchymal Stem Cells/metabolism , Silk/chemistry , Tropoelastin/chemistry , Cell Culture Techniques , Cell Survival , Cells, Immobilized/cytology , Cells, Immobilized/metabolism , Chondrogenesis , Humans , Mesenchymal Stem Cells/cytology , OsteogenesisABSTRACT
Microscaled self-rolling construct sheets from silk protein material have been fabricated, containing a silk bimorph composed of silk ionomers as an active layer and cross-linked silk ß-sheet as the passive layer. The programmable morphology was experimentally explored along with a computational simulation to understand the mechanism of shape reconfiguration. The neutron reflectivity shows that the active silk ionomers layer undergoes remarkable swelling (eight times increase in thickness) after deprotonation while the passive silk ß-sheet retains constant volume under the same conditions and supports the bimorph construct. This selective swelling within the silk-on-silk bimorph microsheets generates strong interfacial stress between layers and out-of-plane forces, which trigger autonomous self-rolling into various 3D constructs such as cylindrical and helical tubules. The experimental observations and computational modeling confirmed the role of interfacial stresses and allow programming the morphology of the 3D constructs with particular design. We demonstrated that the biaxial stress distribution over the 2D planar films depends upon the lateral dimensions, thickness and the aspect ratio of the microsheets. The results allow the fine-tuning of autonomous shape transformations for the further design of complex micro-origami constructs and the silk based rolling/unrolling structures provide a promising platform for polymer-based biomimetic devices for implant applications.
ABSTRACT
We have demonstrated the facile formation of reversible and fast self-rolling biopolymer microstructures from sandwiched active-passive, silk-on-silk materials. Both experimental and modeling results confirmed that the shape of individual sheets effectively controls biaxial stresses within these sheets, which can self-roll into distinct 3D structures including microscopic rings, tubules, and helical tubules. This is a unique example of tailoring self-rolled 3D geometries through shape design without changing the inner morphology of active bimorph biomaterials. In contrast to traditional organic-soluble synthetic materials, we utilized a biocompatible and biodegradable biopolymer that underwent a facile aqueous layer-by-layer (LbL) assembly process for the fabrication of 2D films. The resulting films can undergo reversible pH-triggered rolling/unrolling, with a variety of 3D structures forming from biopolymer structures that have identical morphology and composition.
Subject(s)
Biocompatible Materials/chemistry , Silk/chemistry , Silk/ultrastructure , Animals , Hydrogen-Ion ConcentrationABSTRACT
This study introduces double-brush designs of functionalized silk polyelectrolytes based upon regenerated silk fibroin (SF), which is modified with poly-L-lysine (SF-PLL), poly-L-glutamic acid (SF-PGA), and poly(ethylene glycol) (PEG) side chains with different grafting architecture and variable amino acid-PEG graft composition for cell encapsulation. The molecular weight of poly amino acids (length of side chains), molecular weight and degree of PEG grafting (D) were varied in order to assess the formation of cytocompatible and robust layer-by-layer (LbL) shells on two types of bacterial cells (Gram-negative and Gram-positive bacteria). We observed that shells assembled with charged polycationic amino acids adversely effected the properties of microbial cells while promoting the formation of large cell aggregates. In contrast, hydrogen-bonded shells with high PEG grafting density were the most cytocompatible, while promoting formation of stable colloidal suspensions of individual cell encapsulates. The stability to degradation of silk shells (under standard cell incubation procedure) was related to the intrinsic properties of thermodynamic bonding forces, with shells based on electrostatic interactions having stronger resistance to deterioration compared to pure hydrogen-bonded silk shells. By optimizing the charge density of silk polyelectrolytes brushes, as well as the length and the degree of PEG side grafts, robust and cytocompatible cell coatings were engineered that can control aggregation of cells for biosensor devices and other potential biomedical applications.
Subject(s)
Amino Acids/chemistry , Bacillus subtilis/cytology , DNA, Recombinant/genetics , Escherichia coli/cytology , Fibroins/chemistry , Fibroins/pharmacology , Polyethylene Glycols/chemistry , Bacillus subtilis/drug effects , Bacillus subtilis/genetics , Biosensing Techniques , Capsules , Escherichia coli/drug effects , Escherichia coli/genetics , Riboswitch/geneticsABSTRACT
We demonstrated inkjet printing of large-scale dual-type encapsulated bacterial cell arrays for prospective multiplexing sensing. The dual cell arrays were constructed on the basis of two types of bioengineered E. coli cells hosting fluorescent reporters (green-GFPa1 and red-turboRFP) capable of detecting different target chemicals. The versatility of inkjet printing allows for the fabrication of uniform multilayered confined structures composed of silk ionomers that served as nests for in-printing different cells. Furthermore, sequential encapsulation of "red" and "green" cells in microscopic silk nest arrays with the preservation of their function allowed for facile confinement of cells into microscopic silk nests, where cells retained dual red-green response to mixed analyte environment. Whole-cell dual arrays immobilized in microscopic biocompatible silk matrices were readily activated after prolonged storage (up to 3 months, ambient conditions), showing red-green pattern and demonstrating an effective prototype of robust and long-living multiplexed biosensors for field applications.
ABSTRACT
Robust and stable microcapsules are assembled from poly-amino acid-modified silk fibroin reinforced with graphene oxide flakes using layer-by-layer (LbL) assembly, based on biocompatible natural protein and carbon nanosheets. The composite microcapsules are extremely stable in acidic (pH 2.0) and basic (pH 11.5) conditions, accompanied with pH-triggered permeability, which facilitates the controllable encapsulation and release of macromolecules. Furthermore, the graphene oxide incorporated into ultrathin LbL shells induces greatly reinforced mechanical properties, with an elastic modulus which is two orders of magnitude higher than the typical values of original silk LbL shells and shows a significant, three-fold reduction in pore size. Such strong nanocomposite microcapsules can provide solid protection of encapsulated cargo under harsh conditions, indicating a promising candidate with controllable loading/unloading for drug delivery, reinforcement, and bioengineering applications.
Subject(s)
Fibroins/chemistry , Graphite/chemistry , Silk/chemistry , Hydrogen-Ion Concentration , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Oxides/chemistry , PermeabilityABSTRACT
An inkjet printing approach is presented for the facile fabrication of microscopic arrays of biocompatible silk "nests" capable of hosting live cells for prospective biosensors. The patterning of silk fibroin nests were constructed by the layer-by-layer (LbL) assembly of silk polyelectrolytes chemically modified with poly-(l-lysine) and poly-(l-glutamic acid) side chains. The inkjet-printed silk circular regions with a characteristic "nest" shape had diameters of 70-100 µm and a thickness several hundred nanometers were stabilized by ionic pairing and by the formation of the silk II crystalline secondary structure. These "locked-in" silk nests remained anchored to the substrate during incubation in cell growth media to provide a biotemplated platform for printing-in, immobilization, encapsulation and growth of cells. The process of inkjet-assisted printing is versatile and can be applied on any type of substrate, including rigid and flexible, with scalability and facile formation.
Subject(s)
Biocompatible Materials/chemistry , Biotechnology/methods , Fibroins/chemistry , Cells, Immobilized , Escherichia coli , Polyglutamic Acid/chemistry , Polylysine/chemistry , Silk/chemistryABSTRACT
Platelet gel, a fibrin network containing activated platelets, is widely used in regenerative medicine due the capacity of platelet-derived growth factors to accelerate and direct healing processes. However, limitations to this approach include poor mechanical properties, relatively rapid degradation, and the lack of control of release of growth factors at the site of injection. These issues compromise the ability of platelet gels for sustained function in regenerative medicine. In the present study, a combination of platelet gels with silk fibroin gel was studied to address the above limitations. Mixing sonicated silk gels with platelet gels extended the release of growth factors without inhibiting gel-forming ability. The released growth factors were biologically active and their delivery was modified further by manipulation of the charge of the silk protein. Moreover, the silk gel augmented both the rheological properties and compressive stiffness of the platelet gel, tuned by the silk concentration and/or silk/platelet gel ratio. Silk-platelet gel injections in nude rats supported enhanced cell infiltration and blood vessel formation representing a step towards new platelet gel formulations with enhanced therapeutic impact.
Subject(s)
Blood Platelets/chemistry , Gels/pharmacology , Silk/pharmacology , Animals , Cell Proliferation/drug effects , Compressive Strength/drug effects , Extracellular Signal-Regulated MAP Kinases/metabolism , Human Umbilical Vein Endothelial Cells/cytology , Human Umbilical Vein Endothelial Cells/drug effects , Human Umbilical Vein Endothelial Cells/metabolism , Humans , Immunohistochemistry , MAP Kinase Signaling System/drug effects , Platelet-Derived Growth Factor/metabolism , Rats , Rats, Nude , Rheology/drug effects , Time Factors , Vascular Endothelial Growth Factor A/metabolismABSTRACT
Soft tissue adhesion on titanium represents a challenge for implantable materials. In order to improve adhesion at the cell/material interface we used a new approach based on the molecular recognition of titanium by specific peptides. Silk fibroin protein was chemically grafted with titanium binding peptide (TiBP) to increase adsorption of these chimeric proteins to the metal surface. A quartz crystal microbalance was used to quantify the specific adsorption of TiBP-functionalized silk and an increase in protein deposition by more than 35% was demonstrated due to the presence of the binding peptide. A silk protein grafted with TiBP and fibronectin-derived arginine-glycine-aspartic acid (RGD) peptide was then prepared. The adherence of fibroblasts on the titanium surface modified with the multifunctional silk coating demonstrated an increase in the number of adhering cells by 60%. The improved adhesion was demonstrated by scanning electron microscopy and immunocytochemical staining of focal contact points. Chick embryo organotypic culture also revealed strong adhesion of endothelial cells expanding on the multifunctional silk peptide coating. These results demonstrated that silk functionalized with TiBP and RGD represents a promising approach to modify cell-biomaterial interfaces, opening new perspectives for implantable medical devices, especially when reendothelialization is required.
Subject(s)
Cell Adhesion , Oligopeptides , Silk , Titanium , 3T3 Cells , Animals , Fluorescent Antibody Technique , Mice , Microscopy, Electron, ScanningABSTRACT
The response of human bone marrow derived human mesenchymal stem cells (hMSCs) encapsulated in silk ionomer hydrogels was studied. Silk aqueous solutions with silk-poly-L-lysine or silk-poly-L-glutamate were formed into hydrogels via ultrasonication in situ with different net charges. hMSCs were encapsulated within the hydrogels and the impact of matrix charge was assessed over weeks in osteogenic, adipogenic and maintenance growth media. These modified silk charged polymers supported cell viability and proliferative potential, and the hMSCs were able to differentiate toward osteogenic or adipogenic lineages in the corresponding differentiation media. The silk/silk-poly-L-lysine hydrogels exhibited a positive effect on selective osteogenesis of hMSCs, inducing differentiation toward an osteogenic lineage even in the absence of osteogenic supplements, while also inhibiting adipogenesis. In contrast, silk/silk fibroin-poly-L-glutamate hydrogels supported both osteogenic and adipogenic differentiation of hMSCs when cultured under induction conditions. The results demonstrate the potential utility of silk-based ionomers in gel formats for hMSCs encapsulation and for directing hMSCs long term functional differentiation toward specific lineages.
Subject(s)
Cell Differentiation/drug effects , Fibroins/pharmacology , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Polyglutamic Acid/pharmacology , Polylysine/pharmacology , Alkaline Phosphatase/metabolism , Animals , Calcium/pharmacology , Cell Lineage/drug effects , Cell Survival/drug effects , Cells, Immobilized/cytology , Cells, Immobilized/drug effects , Cells, Immobilized/enzymology , Cells, Immobilized/metabolism , Humans , Hydrogels/chemistry , Leptin/metabolism , Mesenchymal Stem Cells/enzymology , Mesenchymal Stem Cells/metabolism , Organic Chemicals/metabolism , Staining and LabelingABSTRACT
We studied the pH-responsive behavior of layer-by-layer (LbL) microcapsules fabricated from silk fibroin chemically modified with different poly amino acid side chains: cationic (silk-poly L-lysine, SF-PL) or anionic (silk-poly-L-glutamic acid, SF-PG). We observed that stable ultrathin shell microcapsules can be assembled with a dramatic increase in swelling, thickness, and microroughness at extremely acidic (pH < 2.5) and basic (pH > 11.0) conditions without noticeable disintegration. These changes are accompanied by dramatic changes in shell permeability with a 2 orders of magnitude increase in the diffusion coefficient. Moreover, the silk ionomer shells undergo remarkable softening with a drop in Young's modulus by more than 1 order of magnitude due to the swelling, stretching, and increase in material porosity. The ability to control permeability and mechanical properties over a wide range for the silk-based microcapsules, with distinguishing stability under harsh environmental conditions, provides an important system for controlled loading and release and applications in bioengineering.
Subject(s)
Fibroins/chemistry , Mechanical Phenomena , Microtechnology , Polymers/chemistry , Amino Acids/chemistry , Capsules , Diffusion , Hydrogen-Ion Concentration , Permeability , Polyethyleneimine/chemistryABSTRACT
We demonstrate the assembly of extremely robust and pH-responsive thin shell LbL microcapsules from silk fibroin counterparts modified with poly(lysine) and poly(glutamic) acid, which are based on biocompatible silk ionomer materials in contrast with usually exploited synthetic polyelectrolytes. The microcapsules are extremely stable in an unusually wide pH range from 1.5 to 12.0 and show a remarkable degree of reversible swelling/deswelling response in dimensions, as exposed to extreme acidic and basic conditions. These changes are accompanied by reversible variations in shell permeability that can be utilized for pH-controlled loading and unloading of large macromolecules. Finally, we confirmed that these shells can be utilized to encapsulate yeast cells with a viability rate much higher than that for traditional synthetic polyelectrolytes.
Subject(s)
Capsules/chemical synthesis , Fibroins/chemistry , Fibroins/metabolism , Biocompatible Materials/chemical synthesis , Biocompatible Materials/chemistry , Capsules/chemistry , Capsules/metabolism , Hydrogen-Ion Concentration , Polyglutamic Acid/metabolism , Polylysine/metabolism , Surface PropertiesABSTRACT
Inulin was chosen as a starting polymer for biocompatible, pH-sensitive and biodegradable hydrogels. Three INUDVSA-TT hydrogels were obtained by crosslinking inulin derivatives with trimethylolpropane tris(3-mercaptopropionate) under varying conditions. The resulting hydrogels were cell compatible, as demonstrated by MTS and trypan blue exclusion assays acting on Caco-2 cells, and were biodegraded by inulinase and esterase, thus suggesting their use as colonic drug delivery systems. 2-Methoxyestradiol, an anti-cancer drug, was soaked in INUDVSA-TT hydrogels and its in vitro release and apoptotic effect on Caco-2 cells were evaluated.
Subject(s)
Colon/metabolism , Drug Delivery Systems , Estradiol/analogs & derivatives , Hydrogels/metabolism , Inulin/analogs & derivatives , Sulfhydryl Compounds/chemistry , Sulfones/chemistry , 2-Methoxyestradiol , Bisbenzimidazole , Caco-2 Cells , Cell Survival/drug effects , Colon/cytology , Cross-Linking Reagents/pharmacology , DNA Fragmentation/drug effects , Estradiol/pharmacology , Humans , Molecular Weight , Particle Size , Succinic Anhydrides/chemistryABSTRACT
A novel pH-sensitive and biodegradable composite hydrogel, based on a methacrylated and succinic derivative of dextran, named Dex-MA-SA, and a methacrylated and succinic derivative of alpha,beta-poly( N-2-hydroxyethyl)- DL-aspartamide (PHEA), named PHM-SA, was produced by photocross-linking. The goal was to obtain a colon-specific drug delivery system, exploiting both the pH-sensitive behavior and the colon-specific degradability. The hydrogel prepared with a suitable ratio between the polysaccharide and the polyaminoacid was characterized regarding its swelling behavior in gastrointestinal simulated conditions, chemical and enzymatic degradability, interaction with mucin, and cell compatibility on CaCo-2 cells. Moreover, 2-methoxyestradiol was chosen as a model of anticancer drug and release studies, were performed in the absence or in the presence of dextranase and esterase. The obtained hydrogel, due to its pH-sensitive swelling and enzymatic degradability, together with mucoadhesion and cell compatibility, could be potentially useful as system for the oral treatment of colonic cancer.