Positronium Laser Cooling via the 1

We report on laser cooling of a large fraction of positronium (Ps) in free flight by strongly saturating the 1^{3}S-2^{3}P transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived 2^{3}P states. The second effect is one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) to 170(20) K. We demonstrate a 58(9)% increase in the fraction of Ps atoms with v_{1D}<3.7×10^{4} ms^{-1}.

Production of positronium chloride: A study of the charge exchange reaction between Ps and Cl.

We present cross sections for the formation of positronium chloride (PsCl) in its ground state from the charge exchange between positronium (Ps) and chloride (Cl-) in the range of 10 meV-100 eV Ps energy. We have used theoretical models based on the first Born approximation in its three-body formulation. We simulated the collisions between Ps and Cl- using ab initio binding energies and positronic wave functions at both the mean-field and correlated levels extrapolated to the complete basis set limit. The accuracy of these ab initio data was benchmarked on the PsF system with the existing highly accurate results, including the very recent quantum Monte Carlo results. We have investigated Ps excited states up to n = 4. The results suggest that the channel Ps(n = 2) is of particular interest for the production of PsCl in the ground state and shows that an accurate treatment of correlation effects (i.e., electron-electron and electron-positron correlations) leads to a significant change in the magnitude of the PsCl production cross section with respect to the mean-field level.

Tunable orbital angular momentum in high-harmonic generation.

Optical vortices are currently one of the most intensively studied topics in optics. These light beams, which carry orbital angular momentum (OAM), have been successfully utilized in the visible and infrared in a wide variety of applications. Moving to shorter wavelengths may open up completely new research directions in the areas of optical physics and material characterization. Here, we report on the generation of extreme-ultraviolet optical vortices with femtosecond duration carrying a controllable amount of OAM. From a basic physics viewpoint, our results help to resolve key questions such as the conservation of angular momentum in highly nonlinear light-matter interactions, and the disentanglement and independent control of the intrinsic and extrinsic components of the photon's angular momentum at short-wavelengths. The methods developed here will allow testing some of the recently proposed concepts such as OAM-induced dichroism, magnetic switching in organic molecules and violation of dipolar selection rules in atoms.

Precise Access to the Molecular-Frame Complex Recombination Dipole through High-Harmonic Spectroscopy.

We report on spectral intensity and group delay measurements of the highest-occupied molecular-orbital (HOMO) recombination dipole moment of N_{2} in the molecular-frame using high harmonic spectroscopy. We take advantage of the long-wavelength 1.3 µm driving laser to isolate the HOMO in the near threshold region, 19-67 eV. The precision of our group delay measurements reveals previously unseen angle-resolved spectral features associated with autoionizing resonances, and allows quantitative comparison with cutting-edge correlated 8-channel photoionization dipole moment calculations.

Synthesis and characterization of attosecond light vortices in the extreme ultraviolet.

Infrared and visible light beams carrying orbital angular momentum (OAM) are currently thoroughly studied for their extremely broad applicative prospects, among which are quantum information, micromachining and diagnostic tools. Here we extend these prospects, presenting a comprehensive study for the synthesis and full characterization of optical vortices carrying OAM in the extreme ultraviolet (XUV) domain. We confirm the upconversion rules of a femtosecond infrared helically phased beam into its high-order harmonics, showing that each harmonic order carries the total number of OAM units absorbed in the process up to very high orders (57). This allows us to synthesize and characterize helically shaped XUV trains of attosecond pulses. To demonstrate a typical use of these new XUV light beams, we show our ability to generate and control, through photoionization, attosecond electron beams carrying OAM. These breakthroughs pave the route for the study of a series of fundamental phenomena and the development of new ultrafast diagnosis tools using either photonic or electronic vortices.

Presence and persistence of wastewater pathogen Escherichia coli O157:H7 in hydroponic reactors of treatment wetland species.

Treatment wetlands (TWs) efficiently remove many pollutants including a several log order reduction of pathogens from influent to effluent; however, there is evidence to suggest that pathogen cells are sequestered in a subsurface wetland and may remain viable months after inoculation. Escherichia coli is a common pathogen in domestic and agricultural wastewater and the O157:H7 strain causes most environmental outbreaks in the United States. To assess attachment of E. coli to the TW rhizosphere, direct measurements of E. coli levels were taken. Experiments were performed in chemostats containing either Teflon nylon as an abiotic control or roots of Carex utriculata or Schoenoplectus acutus. Flow of simulated wastewater through the chemostat was set to maintain a 2 hour residence time. The influent was inoculated with E. coli O157:H7 containing DsRed fluorescent protein. Root samples were excised and analyzed via epifluorescent microscopy. E. coli O157:H7 was detected on the root surface at 2 hours after inoculation, and were visible as single cells. Microcolonies began forming at 24 hours post-inoculation and were detected for up to 1 week post-inoculation. Image analysis determined that the number of microcolonies with >100 cells increased 1 week post-inoculation, confirming that E. coli O157:H7 is capable of growth within biofilms surrounding wetland plant roots.

Multi-channel electronic and vibrational dynamics in polyatomic resonant high-order harmonic generation.

High-order harmonic generation in polyatomic molecules generally involves multiple channels of ionization. Their relative contribution can be strongly influenced by the presence of resonances, whose assignment remains a major challenge for high-harmonic spectroscopy. Here we present a multi-modal approach for the investigation of unaligned polyatomic molecules, using SF6 as an example. We combine methods from extreme-ultraviolet spectroscopy, above-threshold ionization and attosecond metrology. Fragment-resolved above-threshold ionization measurements reveal that strong-field ionization opens at least three channels. A shape resonance in one of them is found to dominate the signal in the 20-26 eV range. This resonance induces a phase jump in the harmonic emission, a switch in the polarization state and different dynamical responses to molecular vibrations. This study demonstrates a method for extending high-harmonic spectroscopy to polyatomic molecules, where complex attosecond dynamics are expected.

Floating treatment wetlands for domestic wastewater treatment.

Floating islands are a form of treatment wetland characterized by a mat of synthetic matrix at the water surface into which macrophytes can be planted and through which water passes. We evaluated two matrix materials for treating domestic wastewater, recycled plastic and recycled carpet fibers, for chemical oxygen demand (COD) and nitrogen removal. These materials were compared to pea gravel or open water (control). Experiments were conducted in laboratory scale columns fed with synthetic wastewater containing COD, organic and inorganic nitrogen, and mineral salts. Columns were unplanted, naturally inoculated, and operated in batch mode with continuous recirculation and aeration. COD was efficiently removed in all systems examined (>90% removal). Ammonia was efficiently removed by nitrification. Removal of total dissolved N was ∼50% by day 28, by which time most remaining nitrogen was present as NO(3)-N. Complete removal of NO(3)-N by denitrification was accomplished by dosing columns with molasses. Microbial communities of interest were visualized with denaturing gradient gel electrophoresis (DGGE) by targeting specific functional genes. Shifts in the denitrifying community were observed post-molasses addition, when nitrate levels decreased. The conditioning time for reliable nitrification was determined to be approximately three months. These results suggest that floating treatment wetlands are a viable alternative for domestic wastewater treatment.

Detection and enumeration of haloacetic acid-degrading bacteria in drinking water distribution systems using dehalogenase genes.

AIMS: To develop a PCR-based tracking method for the detection of a subset of bacteria in drinking water distribution systems capable of degrading haloacetic acids (HAAs). METHODS AND RESULTS: Published degenerate PCR primers were used to determine that 54% of tap water samples (7/13) were positive for a deh gene, indicating that drinking water distribution systems may harbour bacteria capable of HAA degradation. As the published primer sets were not sufficiently specific for quantitative PCR, new primers were designed to amplify dehII genes from selected indicator strains. The developed primer sets were effective in directly amplifying dehII genes from enriched consortia samples, and the DNA extracted from tap water provided that an additional nested PCR step for detection of the dehII gene was used. CONCLUSIONS: This study demonstrates that drinking water distribution systems harbour microbes capable of degrading HAAs. In addition, a quantitative PCR method was developed to detect and quantify dehII genes in drinking water systems. SIGNIFICANCE AND IMPACT OF THE STUDY: The development of a technique to rapidly screen for the presence of dehalogenase genes in drinking water distribution systems could help water utilities determine if HAA biodegradation is occurring in the distribution system.

Integration and decontamination of Bacillus cereus in Pseudomonas fluorescens biofilms.

AIMS: The hypothesis that surrogate planktonic pathogens (Bacillus cereus and polystyrene microspheres) could be integrated in biofilms and protected from decontamination was tested. METHODS AND RESULTS: Pseudomonas fluorescens biofilms were grown on polyvinyl chloride coupons in annular reactors under low nutrient conditions. After biofilm growth, B. cereus spores and polystyrene microspheres (an abiotic control) were introduced separately. Shear stress at the biofilm surface was varied between 0.15 and 1.5 N m(-2). The amount of surrogate pathogens introduced ranged from approximately 10(5) CFU ml(-1) to 10(10 )spheres ml(-1). The quantity of surrogate pathogens integrated in the biofilm was proportional to the amount introduced. In 14 of the 16 cases, 0.4-3.0% of the spores or spheres introduced were measured in the biofilms. The other two cases had 10% and 21% of the spores detected. Data suggested that the spores germinated in the system. The amount of surrogate pathogens detected in the biofilms was higher in the mid-shear range. Chlorine treatment reduced the quantity of both surrogate pathogens and biofilm organisms. In one experiment, the biofilms and B. cereus recovered when the chlorine treatment was terminated. CONCLUSIONS: Planktonic surrogate pathogens can be integrated in biofilms and protected from chlorination decontamination. SIGNIFICANCE AND IMPACT OF THE STUDY: This knowledge assists in understanding the impact of biofilms on harbouring potential pathogens in drinking-water systems and protecting the pathogens from decontamination.

Retention of a model pathogen in a porous media biofilm.

The inadvertent or the deliberate introduction of pathogens into drinking water can lead to public health consequences. Distribution system sampling strategies are needed to provide information on the identity, source and fate of the introduced pathogens. Porous media biofilm reactors conditioned with undefined drinking water biofilms were tested for their ability to immobilize Escherichia coli 0157:H7. Biofilms were established by applying continuous flow of biologically activated carbon treated water with natural microflora and supplemented nutrient solution (0.5 mg l(-1) C) for 2 or 3 weeks. Control reactors were clean and were not colonized with biofilm. All reactors were injected with slug doses of approximately 1 x 10(9) cfu E. coli O157:H7. On the basis of the plate count enumeration of the introduced pathogen, reactors pre-colonized for 2 or 3 weeks retained significantly more cells (0.75 and 9.37% of the introduced spike dose, respectively) compared with uncolonized control reactors (0.22%). Compared with cultivation, microscopic direct counts and quantitative PCR suggested significantly higher and lower numbers of pathogens, respectively. Plate counts were thus considered as the method of choice for pathogen enumeration in this study. In addition to providing general insights into interactions between pathogens and drinking water biofilms, the study concluded that engineered biofilm systems may be considered as a device to capture pathogens from the bulk flow for monitoring purposes.

Denaturing gradient gel electrophoresis can rapidly display the bacterial diversity contained in 16S rDNA clone libraries.

Two different strategies for molecular analysis of bacterial diversity, 16S rDNA cloning and denaturing gradient gel electrophoresis (DGGE), were combined into a single protocol that took advantage of the best attributes of each: the ability of cloning to package DNA sequence information and the ability of DGGE to display a community profile. In this combined protocol, polymerase chain reaction products from environmental DNA were cloned, and then DGGE was used to screen the clone libraries. Both individual clones and pools of randomly selected clones were analyzed by DGGE, and these migration patterns were compared to the conventional DGGE profile produced directly from environmental DNA. For two simple bacterial communities (biofilm from a humics-fed laboratory reactor and planktonic bacteria filtered from an urban freshwater pond), pools of 35-50 clones produced DGGE profiles that contained most of the bands visible in the conventional DGGE profiles, indicating that the clone pools were adequate for identifying the dominant genotypes. However, DGGE profiles of two different pools of 50 clones from a lawn soil clone library were distinctly different from each other and from the conventional DGGE profile, indicating that this small number of clones poorly represented the bacterial diversity in soil. Individual clones with the same apparent DGGE mobility as prominent bands in the humics reactor community profiles were sequenced from the clone plasmid DNA rather than from bands excised from the gel. Because a longer fragment was cloned (approximately 1500 bp) than was actually analyzed in DGGE (approximately 350 bp), far more sequence information was available using this approach that could have been recovered from an excised gel band. This clone/DGGE protocol permitted rapid analysis of the microbial diversity in the two moderately complex systems, but was limited in its ability to represent the diversity in the soil microbial community. Nonetheless, clone/DGGE is a promising strategy for fractionating diverse microbial communities into manageable subsets consisting of small pools of clones.

Interaction of Klebsiella oxytoca and Burkholderia cepacia in dual-species batch cultures and biofilms as a function of growth rate and substrate concentration.

Dual-species microbial interactions have been extensively reported for batch and continuous culture environments. However, little research has been performed on dual-species interaction in a biofilm. This research examined the effects of growth rate and substrate concentration on dual-species population densities in batch and biofilm reactors. In addition, the feasibility of using batch reactor kinetics to describe dual-species biofilm interactions was explored. The scope of the research was directed toward creating a dual-species biofilm for the biodegradation of trichloroethylene, but the findings are a significant contribution to the study of dual-species interactions in general. The two bacterial species used were Burkholderia cepacia PR1-pTOM(31c), an aerobic organism capable of constitutively mineralizing trichloroethylene (TCE), and Klebsiella oxytoca, a highly mucoid, facultative anaerobic organism. The substrate concentrations used were different dilutions of a nutrient-rich medium resulting in dissolved organic carbon (DOC) concentrations on the order of 30, 70, and 700 mg/L. Presented herein are single- and dual-species population densities and growth rates for these two organisms grown in batch and continuous-flow biofilm reactors. In batch reactors, planktonic growth rates predicted dual-species planktonic species dominance, with the faster-growing organism (K. oxytoca) outcompeting the slower-growing organism (B. cepacia). In a dual-species biofilm, however, dual-species planktonic growth rates did not predict which organism would have the higher dual-species biofilm population density. The relative fraction of each organism in a dual-species biofilm did correlate with substrate concentration, with B. cepacia having a greater proportional density in the dual-species culture with K. oxytoca at low (30 and 70 mg/L DOC) substrate concentrations and K. oxytoca having a greater dual-species population density at a high (700 mg/L DOC) substrate concentration. Results from this research demonstrate the effectiveness of using substrate concentration to control population density in this dual-species biofilm.

Health and aesthetic impacts of copper corrosion on drinking water.

Traditional research has focused on the visible effects of corrosion--failures, leaks, and financial debits--and often overlooked the more hidden health and aesthetic aspects. Clearly, corrosion of copper pipe can lead to levels of copper in the drinking water that exceed health guidelines and cause bitter or metallic tasting water. Because water will continue to be conveyed to consumers worldwide through metal pipes, the water industry has to consider both the effects of water quality on corrosion and the effects of corrosion on water quality. Integrating four key factors--chemical/biological causes, economics, health and aesthetics--is critical for managing the distribution system to produce safe water that consumers will use with confidence. As technological developments improve copper pipes to minimize scaling and corrosion, it is essential to consider the health and aesthetic effects on an equal plane with chemical/biological causes and economics to produce water that is acceptable for public consumption.

Assessing technician effects when extracting quantities from microscope images.

Consider an experiment where the response is based on an image; e.g., an image captured to a computer file by a digital camera mounted on a microscope. Suppose relevant quantitative measures are extracted from the images so that results can be analyzed by conventional statistical methods. The steps involved in extracting the measures may require that the technicians, who are processing the images, perform some subjective manipulations. In this case, it is important to determine the bias and variability, if any, attributable to the technicians' decisions. This paper describes the experimental design and statistical analyses that are useful for those determinations. The design and analysis are illustrated by application to two biofilm research projects that involved quantitative image analysis. In one investigation, the technician was required to choose a threshold level, then the image analysis program automatically extracted relevant measures from the resulting black and white image. In the other investigation, the technician was required to choose fiducial points in each of two images collected on different microscopes; then the image analysis program registered the images by stretching, rotating, and overlaying them, so that their quantitative features could be correlated. These investigations elucidated the effects of the technicians' decisions, thereby helping us to assess properly the statistical uncertainties in the conclusions for the primary experiments.

Movement, replication, and emigration rates of individual bacteria in a biofilm.

Single-cell behavior within a biofilm was observed over a period of several hours. The observations were converted into quantitative stochastic rules governing the behavior of individual cells within a biofilm. Such a quantitative summary provides not only a concise description of the results but also information helpful when constructing computer models of dynamic biofilm systems. The time to division, emigration, and rate of motility of individual green fluorescent protein labeled Pseudomonas aeruginosa PAO1 cells in a 3-10 microm thick biofilm containing predominantly non-GFP labeled cells were calculated based on images of individual cells collected at 15-min time intervals. The biofilms were grown in flow cells and the images captured with a confocal laser microscope. Cells destined to emigrate are more active than those that remain; the geometric means for velocities in the biofilm are 1.0 microm/h for remaining cells and 1.5 microm/h for emigrating cells. The median time to emigration was 2.0 h. During the experimental observation period, the estimated probability for emigration is 0.44, illustrating that a substantial number of bacteria leave the field of view. Cells emigrate at a median time one-third that of the median time to replication. Specifically, the median time for cells to divide was 6.9 h, and it was estimated that 10% of the cells had a time to division greater than 10 h.

Characterization of phenotypic changes in Pseudomonas putida in response to surface-associated growth.

The formation of complex bacterial communities known as biofilms begins with the interaction of planktonic cells with a surface. A switch between planktonic and sessile growth is believed to result in a phenotypic change in bacteria. In this study, a global analysis of physiological changes of the plant saprophyte Pseudomonas putida following 6 h of attachment to a silicone surface was carried out by analysis of protein profiles and by mRNA expression patterns. Two-dimensional (2-D) gel electrophoresis revealed 15 proteins that were up-regulated following bacterial adhesion and 30 proteins that were down-regulated. N-terminal sequence analyses of 11 of the down-regulated proteins identified a protein with homology to the ABC transporter, PotF; an outer membrane lipoprotein, NlpD; and five proteins that were homologous to proteins involved in amino acid metabolism. cDNA subtractive hybridization revealed 40 genes that were differentially expressed following initial attachment of P. putida. Twenty-eight of these genes had known homologs. As with the 2-D gel analysis, NlpD and genes involved in amino acid metabolism were identified by subtractive hybridization and found to be down-regulated following surface-associated growth. The gene for PotB was up-regulated, suggesting differential expression of ABC transporters following attachment to this surface. Other genes that showed differential regulation were structural components of flagella and type IV pili, as well as genes involved in polysaccharide biosynthesis. Immunoblot analysis of PilA and FliC confirmed the presence of flagella in planktonic cultures but not in 12- or 24-h biofilms. In contrast, PilA was observed in 12-h biofilms but not in planktonic culture. Recent evidence suggests that quorum sensing by bacterial homoserine lactones (HSLs) may play a regulatory role in biofilm development. To determine if similar protein profiles occurred during quorum sensing and during early biofilm formation, HSLs extracted from P. putida and pure C(12)-HSL were added to 6-h planktonic cultures of P. putida, and cell extracts were analyzed by 2-D gel profiles. Differential expression of 16 proteins was observed following addition of HSLs. One protein, PotF, was found to be down-regulated by both surface-associated growth and by HSL addition. The other 15 proteins did not correspond to proteins differentially expressed by surface-associated growth. The results presented here demonstrate that P. putida undergoes a global change in gene expression following initial attachment to a surface. Quorum sensing may play a role in the initial attachment process, but other sensory processes must also be involved in these phenotypic changes.

Apparent surface associated lag time in growth of primary biofilm cells.

The ability of microorganisms to form biofilms has been well documented. Bacterial cells make a transition from a planktonic state to a sessile state, replicate, and subsequently populate a surface. In this study, organisms that initially colonize a ``clean'' surface are referred to as ``primary'' biofilm cells. The progeny of the first generation of sessile cells are known as ``secondary'' biofilm cells. This study examined the growth of planktonic, primary, and secondary biofilm cells of a green fluorescent protein producing (GFP+) Pseudomonas aeruginosa PA01. Biofilm experiments were performed in a parallel plate flow cell reactor with a glass substratum. Individual cells were tracked over time using a confocal scanning laser microscope (CSLM). Primary cells experience a lag in their growth that may be attributed to adapting to a sessile environment or undergoing a phenotypic change. This is referred to as a surface associated lag time. Planktonic and secondary biofilm cells both grew at a faster rate than the primary biofilm cells under the same nutrient conditions.

Development and structure of drinking water biofilms and techniques for their study.

Drinking water systems are known to harbour biofilms, even though these environments are oligotrophic and often contain a disinfectant. Control of these biofilms is important for aesthetic and regulatory reasons. Study of full-scale systems has pointed to several factors controlling biofilm growth, but cause-and-effect relationships can only be established in controlled reactors. Using laboratory and pilot distribution systems, along with a variety of bacterial detection techniques, insights have been gained on the structure and behaviour of biofilms in these environments. Chlorinated biofilms differ in structure from non-chlorinated biofilms, but often the number of cells is similar. The number and level of cellular activity is dependent on the predominant carbon source. There is an interaction between carbon sources, the biofilm and the type of pipe material, which complicates the ability to predict biofilm growth. Humic substances, which are known to sorb to surfaces, appear to be a usable carbon source for biofilms. The finding offers an explanation for many of the puzzling observations in full scale and laboratory studies on oligotrophic biofilm growth. Pathogens can persist in these environments as well. Detection requires methods that do not require culturing.

Colonization and disinfection of biofilms hosting coliform-colonized carbon fines.

The documented release of carbon fines from granular activated carbon filters is a concern for drinking water utilities, since these particles may carry coliform and even pathogenic bacteria through the disinfection barrier. Such a breakthrough could have an impact on distribution system biofilms. Using total cell counts, specific monoclonal antibody staining, and computerized image analysis, we monitored the colonization of introduced Klebsiella pneumoniae associated with carbon fines in mixed-population biofilms. The particles transported the coliforms to the biofilms and allowed successful colonization. Chlorine (0.5 mg/liter) was then applied as a disinfectant. Most K. pneumoniae along with the carbon fines left the biofilm under these conditions. The impact of chlorine was greater on the coliform bacteria and carbon fines than on the general fixed bacterial population. However, 10% of the introduced coliforms and 20% of the fines remained in the biofilm. The possibility that this represents a mechanism for bacteria of public health concern to be involved in regrowth events is discussed.