An Event-based Neural Compressive Telemetry with >11× Loss-less Data Reduction for High-bandwidth Intracortical Brain Computer Interfaces.

Intracortical brain-computer interfaces offer superior spatial and temporal resolutions, but face challenges as the increasing number of recording channels introduces high amounts of data to be transferred. This requires power-hungry data serialization and telemetry, leading to potential tissue damage risks. To address this challenge, this paper introduces an event-based neural compressive telemetry (NCT) consisting of 8 channel-rotating Δ-ADCs, an event-driven serializer supporting a proposed ternary address event representation protocol, and an event-based LVDS driver. Leveraging a high sparsity of extracellular spikes and high spatial correlation of the high-density recordings, the proposed NCT achieves a compression ratio of >11.4×, while consumes only 1 µW per channel, which is 127× more efficient than state of the art. The NCT well preserves the spike waveform fidelity, and has a low normalized RMS error <23% even with a spike amplitude down to only 31 µV.

Analysis of Clinical Samples of Pancreatic Cyst's Lesions with A Multi-Analyte Bioelectronic Simot Array Benchmarked Against Ultrasensitive Chemiluminescent Immunoassay.

Pancreatic cancer, ranking as the third factor in cancer-related deaths, necessitates enhanced diagnostic measures through early detection. In response, SiMoT-Single-molecule with a large Transistor multiplexing array, achieving a Technology Readiness Level of 5, is proposed for a timely identification of pancreatic cancer precursor cysts and is benchmarked against the commercially available chemiluminescent immunoassay SIMOA (Single molecule array) SP-X System. A cohort of 39 samples, comprising 33 cyst fluids and 6 blood plasma specimens, undergoes detailed examination with both technologies. The SiMoT array targets oncoproteins MUC1 and CD55, and oncogene KRAS, while the SIMOA SP-X planar technology exclusively focuses on MUC1 and CD55. Employing Principal Component Analysis (PCA) for multivariate data processing, the SiMoT array demonstrates effective discrimination of malignant/pre-invasive high-grade or potentially malignant low-grade pancreatic cysts from benign non-mucinous cysts. Conversely, PCA analysis applied to SIMOA assay reveals less effective differentiation ability among the three cyst classes. Notably, SiMoT unique capability of concurrently analyzing protein and genetic markers with the threshold of one single molecule in 0.1 mL positions it as a comprehensive and reliable diagnostic tool. The electronic response generated by the SiMoT array facilitates direct digital data communication, suggesting potential applications in the development of field-deployable liquid biopsy.

A Single-Molecule Bioelectronic Portable Array for Early Diagnosis of Pancreatic Cancer Precursors.

A cohort of 47 patients is screened for pancreatic cancer precursors with a portable 96-well bioelectronic sensing-array for single-molecule assay in cysts fluid and blood plasma, deployable at point-of-care (POC). Pancreatic cancer precursors are mucinous cysts diagnosed with a sensitivity of at most 80% by state-of-the-art cytopathological molecular analyses (e.g., KRASmut DNA). Adding the simultaneous assay of proteins related to malignant transformation (e.g., MUC1 and CD55) is deemed essential to enhance diagnostic accuracy. The bioelectronic array proposed here, based on single-molecule-with-a-large-transistor (SiMoT) technology, can assay both nucleic acids and proteins at the single-molecule limit-of-identification (LOI) (1% of false-positives and false-negatives). It comprises an enzyme-linked immunosorbent assay (ELISA)-like 8 × 12-array organic-electronics disposable cartridge with an electrolyte-gated organic transistor sensor array, and a reusable reader, integrating a custom Si-IC chip, operating via software installed on a USB-connected smart device. The cartridge is complemented by a 3D-printed sensing gate cover plate. KRASmut , MUC1, and CD55 biomarkers either in plasma or cysts-fluid from 5 to 6 patients at a time, are multiplexed at single-molecule LOI in 1.5 h. The pancreatic cancer precursors are classified via a machine-learning analysis resulting in at least 96% diagnostic-sensitivity and 100% diagnostic-specificity. This preliminary study opens the way to POC liquid-biopsy-based early diagnosis of pancreatic-cancer precursors in plasma.

Comparison and Integration of Voltage and Charge Amplifiers for Capacitive ECG Measurements.

OBJECTIVE: Sensing with capacitive electrodes is of interest for long-term, comfortable bio-potential measurements (e.g., ECG). However, due to the small body-to-electrode capacitance (Ce), the design of the associated front-end amplifier remains a challenge. Both voltage amplifiers (VA) and charge amplifiers (CA) can be employed. While basic comparisons of both typologies were done before, this paper extends the comparison to their responses to artifacts (caused by motion or interference). Further, a VA-CA-switchable amplifier is proposed, allowing to adapt the amplifier type to different situations, and enabling to estimate the body-to-electrode capacitance Ce in a passive way. METHODS: A VA-CA switchable amplifier was implemented in a 180 nm CMOS process. The responses to artifacts for VA and CA were studied by modelling, simulations and experiments using the custom IC. The proposed Ce estimation method was validated by electrical tests and in-vivo tests. RESULTS: VAs are less affected by Ce variation artifacts, while CAs recover faster from triboelectricity artifacts. In a VA, these two artifacts are multiplicative and get modulated if they occur simultaneously, but in a CA they remain independent. CONCLUSION: The combined VA-CA amplifier has the potential for optimal amplifier selection according to the properties of the recorded signal, the value of Ce and the actual presence of artifacts. Moreover, it can estimate Ce without extra hardware. SIGNIFICANCE: The proposed VA-CA switchable structure is superior to an individual VA or CA, thanks its adaptability to signal quality and artifacts, and it provides extra information on the body-to-electrode interface quality (Ce).

A Prototype System With Custom-Designed RX ICs for Contrast-Enhanced Ultrasound Imaging.

This work presents a prototype system based on a multichannel receiving (RX) integrated circuit (IC) for contrast-enhanced ultrasound (CEUS) imaging. The RX IC is implemented in a 40-nm low-voltage CMOS technology and is designed to interface to a capacitive micromachined ultrasonic transducer array. To enable a direct connection of the RX electronics to the transducer, an analog multiplexer with on-chip protection circuitry is developed. Stress tests confirm the reliability of this arrangement when combined with a high-voltage pulser. The RX IC is equipped with a highly programmable bandpass filter to capture harmonic signals from ultrasound contrast agents (UCAs) while suppressing fundamental components. In order to examine the impact of analog front-end (AFE) bandpass filtering, in vitro acoustic experiments are performed with UCAs. A spatial resolution analysis suggests that the AFE bandpass filtering combined with a pulse inversion (PI) technique can improve the lateral resolution by 38% or 9% compared to the original full-bandwidth approach or a stand-alone PI approach, respectively, while the impact on axial resolution is negligible. A phantom study shows that compared to digital bandpass filtering, the AFE bandpass filtering enables better use of the dynamic range of the RX electronics, resulting in better generalized contrast-to-noise ratio from 0.44/0.53 to 0.57/0.68 without or with PI.

An RX AFE With Programmable BP Filter and Digitization for Ultrasound Harmonic Imaging.

This paper presents a front-end integrated circuit for ultrasound (US) harmonic imaging, interfacing to a one-dimensional capacitive micromachined ultrasonic transducer (CMUT). It contains a complete ultrasound receiving chain, from analog front-end (AFE) to gigabit/s data link. A two-stage self-biased inverter-based transimpedance amplifier (TIA) is proposed in this work to improve tradeoffs between power, noise, and linearity at the first stage. To improve harmonic imaging performance, the design is further equipped with a 4[Formula: see text]-order highly programmable bandpass filter, which has a tunable bandwidth from 2 MHz to 15 MHz. An 8 b 80 MS/s SAR ADC digitizes the signal, which is further encoded and serialized into an LVDS data link, enabling a reduction in the number of output cables for future systems with multiple ADCs. The design is realized in a 40 nm CMOS technology. Electrical measurements show it consumes 2.9 mW for the AFE and 2.1 mW for the ADC and digital blocks. Its overall dynamic range varies from 61 dB to 69 dB, depending on the reception bandwidth. The imaging capability of this design is further demonstrated in a US transmission and reception imaging system. The acoustic measurements prove successful ultrasound harmonic acquisition, where the on-chip bandpass filter can improve the lateral resolution by more than 30%.

Ultra-high gain diffusion-driven organic transistor.

Emerging large-area technologies based on organic transistors are enabling the fabrication of low-cost flexible circuits, smart sensors and biomedical devices. High-gain transistors are essential for the development of large-scale circuit integration, high-sensitivity sensors and signal amplification in sensing systems. Unfortunately, organic field-effect transistors show limited gain, usually of the order of tens, because of the large contact resistance and channel-length modulation. Here we show a new organic field-effect transistor architecture with a gain larger than 700. This is the highest gain ever reported for organic field-effect transistors. In the proposed organic field-effect transistor, the charge injection and extraction at the metal-semiconductor contacts are driven by the charge diffusion. The ideal conditions of ohmic contacts with negligible contact resistance and flat current saturation are demonstrated. The approach is general and can be extended to any thin-film technology opening unprecedented opportunities for the development of high-performance flexible electronics.

Ambipolar Organic Tri-Gate Transistor for Low-Power Complementary Electronics.

Ambipolar transistors typically suffer from large off-current inherently due to ambipolar conduction. Using a tri-gate transistor it is shown that it is possible to electrostatically switch ambipolar polymer transistors from ambipolar to unipolar mode. In unipolar mode, symmetric characteristics with an on/off current ratio of larger than 10(5) are obtained. This enables easy integration into low-power complementary logic and volatile electronic memories.

A Low-Voltage Chopper-Stabilized Amplifier for Fetal ECG Monitoring With a 1.41 Power Efficiency Factor.

This paper presents a low-voltage current-reuse chopper-stabilized frontend amplifier for fetal ECG monitoring. The proposed amplifier allows for individual tuning of the noise in each measurement channel, minimizing the total power consumption while satisfying all application requirements. The low-voltage current reuse topology exploits power optimization in both the current and the voltage domain, exploiting multiple supply voltages (0.3, 0.6 and 1.2 V). The power management circuitry providing the different supplies is optimized for high efficiency (peak charge-pump efficiency = 90%).The low-voltage amplifier together with its power management circuitry is implemented in a standard 0.18 µm CMOS process and characterized experimentally. The amplifier core achieves both good noise efficiency factor (NEF=1.74) and power efficiency factor (PEF=1.05). Experiments show that the amplifier core can provide a noise level of 0.34 µVrms in a 0.7 to 182 Hz band, consuming 1.17 µW power. The amplifier together with its power management circuitry consumes 1.56 µW, achieving a PEF of 1.41. The amplifier is also validated with adult ECG and pre-recorded fetal ECG measurements.

A 155 µ W 88-dB DR discrete-time ∆Σ modulator for digital hearing aids exploiting a summing SAR ADC quantizer.

This paper presents a low-power switched-capacitor ∆Σ modulator for digital hearing-aid applications that features a novel summing successive approximation (SAR). The summing SAR performs multi-bit quantization together with the analog addition required in feed-forward (FF) ∆Σ modulator (∆ΣM) topologies, with no attenuation of the input signals and no need for amplifiers. The prototype is implemented in a 0.18- µ m CMOS technology and its measurements demonstrate a dynamic range of 88 dB in 10 kHz bandwidth while consuming 155 µW from a 1.8 V supply. The combined use of passive addition and SAR quantization reduces the complexity and power consumption of the modulator. The summing SAR ADC quantizer results in a calculated power saving of 40% when compared to a multi-bit FF ∆ΣM using active addition and flash quantization.

Ordered semiconducting self-assembled monolayers on polymeric surfaces utilized in organic integrated circuits.

We report on a two-dimensional highly ordered self-assembled monolayer (SAM) directly grown on a bare polymer surface. Semiconducting SAMs are utilized in field-effect transistors and combined into integrated circuits as 4-bit code generators. The driving force to form highly ordered SAMs is packing of the liquid crystalline molecules caused by the interactions between the linear alkane moieties and the pi-pi stacking of the conjugated thiophene units. The fully functional circuits demonstrate long-range order over large areas, which can be regarded as the start of flexible monolayer electronics.

Flexible active-matrix displays and shift registers based on solution-processed organic transistors.

At present, flexible displays are an important focus of research. Further development of large, flexible displays requires a cost-effective manufacturing process for the active-matrix backplane, which contains one transistor per pixel. One way to further reduce costs is to integrate (part of) the display drive circuitry, such as row shift registers, directly on the display substrate. Here, we demonstrate flexible active-matrix monochrome electrophoretic displays based on solution-processed organic transistors on 25-microm-thick polyimide substrates. The displays can be bent to a radius of 1 cm without significant loss in performance. Using the same process flow we prepared row shift registers. With 1,888 transistors, these are the largest organic integrated circuits reported to date. More importantly, the operating frequency of 5 kHz is sufficiently high to allow integration with the display operating at video speed. This work therefore represents a major step towards 'system-on-plastic'.