Intraoperative hypotension is associated with decreased long-term survival in older patients after major noncardiac surgery: Secondary analysis of three randomized trials.

STUDY OBJECTIVE: To assess the association of intraoperative hypotension with long-term survivals in older patients after major noncardiac surgery mainly for cancer. DESIGN: A secondary analysis of databases from three randomized trials with long-term follow-up. SETTING: The underlying trials were conducted in 17 tertiary hospitals in China. PATIENTS: Patients aged 60 to 90 years who underwent major noncardiac thoracic or abdominal surgeries (≥ 2 h) in a single center were included in this analysis. EXPOSURES: Restricted cubic spline models were employed to determine the lowest mean arterial pressure (MAP) threshold that was potentially harmful for long-term survivals. Patients were arbitrarily divided into three groups according to the cumulative duration or area under the MAP threshold. The association between intraoperative hypotension exposure and long-term survivals were analyzed with the Cox proportional hazard regression models. MEASUREMENTS: Our primary endpoint was overall survival. Secondary endpoints included recurrence-free and event-free survivals. MAIN RESULTS: A total of 2664 patients (mean age 69.0 years, 34.9% female sex, 92.5% cancer surgery) were included in the final analysis. MAP < 60 mmHg was adopted as the threshold of intraoperative hypotension. Patients were divided into three groups according to duration under MAP < 60 mmHg (<1 min, 1-10 min, and > 10 min) or area under MAP <60 mmHg (< 1 mmHg⋅min, 1-30 mmHg⋅min, and > 30 mmHg⋅min). After adjusting confounders, duration under MAP < 60 mmHg for > 10 min was associated with a shortened overall survival when compared with the < 1 min patients (adjusted hazard ratio [HR] 1.31, 95% confidence interval [CI] 1.09 to 1.57, P = 0.004); area under MAP < 60 mmHg for > 30 mmHg⋅min was associated with a shortened overall survival when compared with the < 1 mmHg⋅min patients (adjusted HR 1.40, 95% CI 1.16 to 1.68, P < 0.001). Similar associations exist between duration under MAP < 60 mmHg for > 10 min or area under MAP < 60 mmHg for > 30 mmHg⋅min and recurrence-free or event-free survivals. CONCLUSIONS: In older patients who underwent major noncardiac surgery mainly for cancer, intraoperative hypotension was associated with worse overall, recurrence-free, and event-free survivals.

Constructing a Cr-Substituted Co-Free Li-Rich Ternary Cathode with a Spinel-Layered Biphase Interface.

Lithium-rich manganese-based layered oxides (LRMOs) have recently attracted enormous attention on account of their remarkably big capacity and high working voltage. However, some inevitable inherent drawbacks impede their wide-scale commercial application. Herein, a kind of Cr-containing Co-free LRMO with a topical spinel phase (Li1.2Mn0.54Ni0.13Cr0.13O2) has been put forward. It has been found that the high valence of Cr6+ can reduce the Li+ ion content and induce the formation of a local spinel phase by combining more Li+ ions, which is beneficial to eliminate the phase boundary between the spinel phase and the bulk phase of the LRMO material, thus dramatically avoiding phase separation during the cycling process. In addition, the introduction of Cr can also expand the layer spacing and construct a stronger Cr-O bond compared with Mn-O, which enables to combine the transition metal (TM) slab to prevent the migration of TM ions and the transformation of the bulk phase to the spinel phase. Simultaneously, the synergistic effect of the successfully constructed spinel-layered biphase interface and the strong Cr-O bond can effectively impede the escape of lattice oxygen during the initial activation process of Li2MnO3 and provide the fast diffusion path for Li+ ion transmission, thus further reinforcing the configurable stability. Besides, Cr-LRMO presents an ultrahigh first discharge specific capacity of 310 mAh g-1, an initial Coulombic efficiency of as high as 92.09%, a good cycling stability (a capacity retention of 94.70% after 100 cycles at 1C), and a small voltage decay (3.655 mV per cycle), as well as a good rate capacity (up to 165.88 mAh g-1 at 5C).

Modulating Surface Architecture and Electronic Conductivity of Li-rich Manganese-Based Cathode.

Li-rich manganese-based cathode (LRMC) has attracted intense attention to developing advanced lithium-ion batteries with high energy density. However, LRMC is still plagued by poor cyclic stability, undesired rate capacity, and irreversible oxygen release. To address these issues, herein, a feasible polyvinylidene fluoride (PVDF)-assisted interface modification strategy is proposed for modulating the surface architecture and electronic conductivity of LRMC by intruding the F-doped carbon coating, spinel structure, and oxygen vacancy on the LRMC, which can greatly enhance the cyclic stability and rate capacity, and restrain the oxygen release for LRMC. As a result, the modified material delivers satisfactory cyclic performance with a capacity retention of 90.22% after 200 cycles at 1 C, an enhanced rate capacity of 153.58 mAh g-1 at 5 C and 126.32 mAh g-1 at 10 C, and an elevated initial Coulombic efficiency of 85.63%. Moreover, the thermal stability, electronic conductivity, and structure stability of LRMC are also significantly improved by the PVDF-assisted interface modification strategy. Therefore, the strategy of simultaneously modulating the surface architecture and the electronic conductivity of LRMC provides a valuable idea to improve the comprehensive electrochemical performance of LRMC, which offers a promising reference for designing LRMC with high electrochemical performance.

Indeno[3,2-b]carbazole-Based Small Molecule Layer Enables Optimized Carrier Transport for PbS Quantum Dot NIR Photodetectors.

Colloidal quantum dots (CQDs) have garnered considerable attention for photodetectors (PDs), attributable to exceptional photoelectric properties and ease solution-based processing. However, the prevalent use of 1,2-ethanedithiol (EDT) as a hole transport layer (HTL) has limitations, such as energy level discrepancies, requisite oxidation, and intricate multilayer assembly. Organic p-type materials, lauded for their superior attributes and synthetic versatility, are now stepping forward as viable substitutes for conventional EDT HTLs. In this work, we introduced an organic HTL derived from indolo[3,2-b]carbazole, named ZL004, leading to a marked improvement in carrier generation and collection, facilitated by the optimized band alignment and enhanced interfacial charge dynamics. The ZL004-based PDs exhibit a photoresponsivity of 0.45 A/W, a noise current of 1.8 × 10-11 A Hz-0.5, a specific detectivity of 4.6 × 109 Jones, and an expansive linear dynamic range of 107 dB─surpassing EDT-based devices across the board, demonstrating the extraordinary property of organic p-type materials for CQD-based PDs.

Mechanical Properties and Pore Structure of Multiwalled Carbon Nanotube-Reinforced Reactive Powder Concrete for Three-Dimensional Printing Manufactured by Material Extrusion.

Three-dimensional (3D) concrete printing technology has been considered promising, attracting extensive attention in the engineering field. Multiwalled carbon nanotubes (MWCNTs) have been used as an additive to reinforce the cement-based material. However, the research on the 3D printed MWCNT-reinforced high-strength concrete is rare. This research is to study the mechanical properties and pore structure of MWCNT-reinforced reactive powder concrete (RPC) for 3D printing. In this research, the workability of the printed RPC mixture with MWCNTs was first tested to pass the criteria of 3D printing. Then, the enhancement effect of MWCNTs on the printed RPC was tested by mechanical properties after hardening. Meanwhile, strength-displacement curves were recorded. In addition, the pore structures of printed RPC were observed and analyzed by X-ray computed tomography (CT) images. The results show that 0.05 wt% MWCNTs have no effect on the workability of the printable RPC slurry. MWCNTs could enhance the mechanical properties of the printed RPC by filling the flaws inside the samples, increasing the viscosity of the RPC slurry and forming bridges between cracks. Besides, 0.05 wt% MWCNTs may cause the failure mode of the printed RPC from brittle failure to ductile failure. In addition, MWCNTs significantly reduced the porosity of the printed RPC by decreasing pores with a volume over 0.01 mm3. As CT images show, the interlayer zone (IZ) of the 3D printed RPC sample is prone to pores, and a higher volume fraction is evident. In particular, within the volume of IZs, the minimum volume fraction at the IZ of 3D printed RPC appears on sample with MWCNTs.

Automatic detection of obstructive sleep apnea based on speech or snoring sounds: a narrative review.

Background and Objective: Obstructive sleep apnea (OSA) is a common chronic disorder characterized by repeated breathing pauses during sleep caused by upper airway narrowing or collapse. The gold standard for OSA diagnosis is the polysomnography test, which is time consuming, expensive, and invasive. In recent years, more cost-effective approaches for OSA detection based in predictive value of speech and snoring has emerged. In this paper, we offer a comprehensive summary of current research progress on the applications of speech or snoring sounds for the automatic detection of OSA and discuss the key challenges that need to be overcome for future research into this novel approach. Methods: PubMed, IEEE Xplore, and Web of Science databases were searched with related keywords. Literature published between 1989 and 2022 examining the potential of using speech or snoring sounds for automated OSA detection was reviewed. Key Content and Findings: Speech and snoring sounds contain a large amount of information about OSA, and they have been extensively studied in the automatic screening of OSA. By importing features extracted from speech and snoring sounds into artificial intelligence models, clinicians can automatically screen for OSA. Features such as formant, linear prediction cepstral coefficients, mel-frequency cepstral coefficients, and artificial intelligence algorithms including support vector machines, Gaussian mixture model, and hidden Markov models have been extensively studied for the detection of OSA. Conclusions: Due to the significant advantages of noninvasive, low-cost, and contactless data collection, an automatic approach based on speech or snoring sounds seems to be a promising tool for the detection of OSA.

Metal-Organic-Framework Derived Co-Mo Multimetal Oxide Semiconductors: Selective Trace-Level Hydrogen Sulfide Detection.

The development of a highly selective and trace-level gas sensing platform for detecting hydrogen sulfide (H2S) remains a formidable challenge. To solve this problem, Co-Mo multimetal oxide semiconductors are rationally tailored by employing metal organic frameworks (MOFs) as self-sacrificial templates. The MOF-derived Co3O4/ß-CoMoO4 based gas sensors displays high sensitivity (Rg/Ra = 22) to 10 ppm of H2S and ultralow limit of detection (10 ppb H2S). The formation of p-p heterojunction and multivalence states of Mo play a crucial role in electron transfer and oxygen adsorption. A sensor array constructed from four Co3O4/ß-CoMoO4 materials with different Co/Mo ratios demonstrates a superior selective discrimination of H2S from other VOCs and malodorous gases by principal component analysis (PCA). Besides, a H2S gas sensing and alarming platform was designed for monitoring the environment contaminated with H2S. This finding provides a feasible approach for the discovery of highly efficient gas sensors to monitor environmental H2S concentration.

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells.

Colloidal quantum dots (CQDs) are promising optoelectronic materials for solution-processed thin film optoelectronic devices. However, the large surface area with abundant surface defects of CQDs and trap-assisted non-radiative recombination losses at the interface between CQDs and charge-transport layer limit their optoelectronic performance. To address this issue, an interface heterojunction strategy is proposed to protect the CQDs interface by incorporating a thin layer of polyethyleneimine (PEIE) to suppress trap-assisted non-radiative recombination losses. This thin layer not only acts as a protective barrier but also modulates carrier recombination and extraction dynamics by forming heterojunctions at the buried interface between CQDs and charge-transport layer, thereby enhancing the interface charge extraction efficiency. This enhancement is demonstrated by the shortened lifetime of carrier extraction from 0.72 to 0.46 ps. As a result, the resultant PbS CQD solar cells achieve a power-conversion-efficiency (PCE) of 13.4% compared to 12.2% without the heterojunction.

Nomogram predictive model for in-hospital mortality risk in elderly ICU patients with urosepsis.

BACKGROUND: Urinary tract infection (UTI) is a common cause of sepsis. Elderly patients with urosepsis in intensive care unit (ICU) have more severe conditions and higher mortality rates owing to factors such as advanced age, immunosenescence, and persistent host inflammatory responses. However, comprehensive studies on nomograms to predict the in-hospital mortality risk in elderly patients with urosepsis are lacking. This study aimed to construct a nomogram predictive model to accurately assess the prognosis of elderly patients with urosepsis and provide therapeutic recommendations. METHODS: Data of elderly patients with urosepsis were extracted from the Medical Information Mart for Intensive Care (MIMIC) IV 2.2 database. Patients were randomly divided into training and validation cohorts. A predictive nomogram model was constructed from the training set using logistic regression analysis, followed by internal validation and sensitivity analysis. RESULTS: This study included 1,251 patients. LASSO regression analysis revealed that the Glasgow Coma Scale (GCS) score, red cell distribution width (RDW), white blood count (WBC), and invasive ventilation were independent risk factors identified from a total of 43 variables studied. We then created and verified a nomogram. The area under the receiver operating characteristic curve (AUC), net reclassification improvement (NRI), integrated discrimination improvement (IDI), and decision curve analysis (DCA) of the nomogram were superior to those of the traditional SAPS-II, APACHE-II, and SOFA scoring systems. The Hosmer-Lemeshow test results and calibration curves suggested good nomogram calibration. The IDI and NRI values showed that our nomogram scoring tool performed better than the other scoring systems. The DCA curves showed good clinical applicability of the nomogram. CONCLUSIONS: The nomogram constructed in this study is a convenient tool for accurately predicting in-hospital mortality in elderly patients with urosepsis in ICU. Improving the treatment strategies for factors related to the model could improve the in-hospital survival rates of these patients.

Glutamatergic neurons in the paraventricular nucleus of the hypothalamus participate in the regulation of visceral pain induced by pancreatic cancer in mice.

Background: Visceral pain induced by pancreatic cancer seriously affects patients' quality of life, and there is no effective treatment, because the mechanism of its neural circuit is unknown. Therefore, the aim of this study is to explore the main neural circuit mechanism regulating visceral pain induced by pancreatic cancer in mice. Methods: The mouse model of pancreatic cancer visceral pain was established on C57BL/6N mice by pancreatic injection of mPAKPC-luc cells. Abdominal mechanical hyperalgesia and hunch score were performed to assess visceral pain; the pseudorabies virus (PRV) was used to identify the brain regions innervating the pancreas; the c-fos co-labeling method was used to ascertain the types of activated neurons; in vitro electrophysiological patch-clamp technique was used to record the electrophysiological activity of specific neurons; the calcium imaging technique was used to determine the calcium activity of specific neurons; specific neuron destruction and chemogenetics methods were used to explore whether specific neurons were involved in visceral pain induced by pancreatic cancer. Results: The PRV injected into the pancreas was detected in the paraventricular nucleus of the hypothalamus (PVN). Immunofluorescence staining showed that the majority of c-fos were co-labeled with glutamatergic neurons in the PVN. In vitro electrophysiological results showed that the firing frequency of glutamatergic neurons in the PVN was increased. The calcium imaging results showed that the calcium activity of glutamatergic neurons in the PVN was enhanced. Both specific destruction of glutamatergic neurons and chemogenetics inhibition of glutamatergic neurons in the PVN alleviated visceral pain induced by pancreatic cancer. Conclusions: Glutamatergic neurons in the PVN participate in the regulation of visceral pain induced by pancreatic cancer in mice, providing new insights for the discovery of effective targets for the treatment of pancreatic cancer visceral pain.

Organic hole transport materials for high performance PbS quantum dot solar cells.

We developed a triazatruxene-based hole transport material (HTM), 3Ka-DBT-3Ka, aiming to enhance band alignment and augment charge generation and collection in devices, as an alternative for 1,2-ethanedithiol (EDT). The PbS CQD solar cells employing 3Ka-DBT-3Ka as the HTM achieve a peak efficiency of 11.4%, surpassing devices employing the conventional PbS-EDT HTM (8.9%).

Neuroinflammation in the paraventricular nucleus of the hypothalamus precipitates visceral pain induced by pancreatic cancer in mice.

Background: Given the pivotal role of neuroinflammation in chronic pain and that the paraventricular nucleus of the hypothalamus (PVN) is a crucial brain region involved in visceral pain regulation, we sought to investigate whether the targeted modulation of microglia and astrocytes in the PVN could ameliorate pancreatic cancer-induced visceral pain (PCVP) in mice. Methods: Using a mouse model of PCVP, achieved by tumor cell injection at the head of the pancreas, we measure the number of glial cells, and at the same time we employed minocycline to inhibit microglia and chemogenetic methods to suppress astrocytes in order to investigate the respective roles of microglia and astrocytes within the PVN in PCVP. Results: Mice exhibited visceral pain at 12, 15 and 18 days post-tumor cell injection. We observed a significant increase in the population of both microglia and astrocytes. Inhibition of microglial activity through minocycline microinjection into the PVN resulted in alleviation of visceral pain within 30 and 60 min. Similarly, chemogenetic inhibition of astrocyte function at 14 and 21 days post-injection also led to relief from visceral pain. Conclusions: This study found that PVN microglia and astrocytes were involved in regulating PCVP. Our results suggest that targeting glia may be a potential approach for alleviating visceral pain in patients with pancreatic cancer.

Inhibition of GABAergic neurons in the paraventricular nucleus of the hypothalamus precipitates visceral pain induced by pancreatic cancer in mice.

Background: For patients with pancreatic cancer, visceral pain is a debilitating symptom that significantly compromises their quality of life. Unfortunately, the lack of effective treatment options can be attributed to our limited understanding of the neural circuitry underlying this phenomenon. The primary objective of this study is to elucidate the fundamental mechanisms governing visceral pain induced by pancreatic cancer in murine models. Methods: A mouse model of pancreatic cancer visceral pain was established in C57BL/6N mice through the intrapancreatic injection of mPAKPC-luc cells. Abdominal mechanical hyperalgesia and hunch score were employed to evaluate visceral pain, whereas the in vitro electrophysiological patch-clamp technique was utilized to record the electrophysiological activity of GABAergic neurons. Specific neuron ablation and chemogenetics methods were employed to investigate the involvement of GABAergic neurons in pancreatic cancer-induced visceral pain. Results: In vitro electrophysiological results showed that the firing frequency of GABAergic neurons in the paraventricular nucleus of the hypothalamus (PVN) was decreased. Specific destruction of GABAergic neurons in the PVN exacerbated visceral pain induced by pancreatic cancer. Chemogenetics activation of GABAergic neurons in the PVN alleviated visceral pain induced by pancreatic cancer. Conclusions: GABAergic neurons located in PVN play a crucial role in precipitating visceral pain induced by pancreatic cancer in mice, thereby offering novel insights for identifying effective targets to treat pancreatic cancer-related visceral pain.

P2/O3 Biphasic Cathode Material through Magnesium Substitution for Sodium-Ion Batteries.

P2-type Fe-Mn-based oxides offer excellent discharge specific capacity and are as affordable as typical layered oxide cathode materials for sodium-ion batteries (SIBs). After Cu modification, though they can improve the cycling performance and air stability, the discharge specific capacity will be reduced. Considering the complementary nature of biphasic phases in electrochemistry, hybridizing P2/O3 hybrid phases can enhance both the storage performance of the battery and specific capacity. Herein, a hybrid phase composite with high capacity and good cycle performance is deliberately designed and successfully prepared by controlling the amount of Mg doping in the layered oxide. It has been found that the introduction of Mg can activate anion redox in the oxide layer, resulting in a significant increase in the specific discharge capacity of the material. Meanwhile, the dual-phase structure can produce an interlocking effect, thus effectively alleviating structure strain. The degradation of cycling performance caused by structural damage during the high-voltage charging and discharging process is clearly mitigated. The results show that the specific discharge capacity of Na0.67Cu0.2Mg0.1Fe0.2Mn0.5O2 is as high as 212.0 mAh g-1 at 0.1C rate and 186.2 mAh g-1 at 0.2C rate. After 80 cycles, the capacity can still maintain 88.1%. Moreover, the capacity and cycle performance as well as the stability can still remain stable even in the high-voltage window. Therefore, this work offers an insightful exploration for the development of composite cathode materials for SIBs.

A sensitive coumarin fluorescence sensor designed for isoprene detection and imaging research in plants.

The release of isoprene by plants is considered to be an adaptation to the environment. Herein, a highly selective coumarin fluorescent probe (DMIC) was designed for detecting isoprene. When isoprene came into contact with the maleimide of DMIC, an electrophilic addition process took place. The powerful push-pull effect of DMIC was disrupted. Simultaneously, intramolecular charge transfer was initiated. This enabled DMIC to achieve rapid detection of isoprene within 5 min. Furthermore, excellent linearity was observed in the concentration range of 1-560 ppm (R2 = 0.996). A limit of detection is 1.6 ppm. DMIC was applied to in vitro studies of plant release of liberated isoprene. By monitoring the release of isoprene from different tree species throughout the day, the dynamics of isoprene release from plants throughout the day have been successfully revealed. In addition, the release of isoprene varied considerably among different tree species. In particular, the biocompatibility of DMIC allowed for the in vivo detection of isoprene using fluorescence imaging. The results successfully revealed the dynamics of isoprene release in plants under stress. The amount of isoprene that a plant produced increased with the severity of the stress it experienced. This suggested that the level of isoprene content in plants could be used as a preliminary indicator of the physiological health status of plants. This research demonstrates great potential for clarifying signal transduction in biological systems. It provided ideas for further understanding the biology of isoprene.

The Recent Progress of Oxygen Reduction Electrocatalysts Used at Fuel Cell Level.

Proton exchange membrane fuel cells (PEMFCs) are gaining significant interest as an attractive substitute for traditional fuel cells, with higher energy density, lower environmental pollution, and better operation efficiency. However, the cathode reaction, i.e., the oxygen reduction reaction (ORR), is widely proved to be inefficient, and therefore an obstacle to the widespread development of PEMFCs. The requirement for affordable highly-efficient ORR catalysts is extremely urgent to be met, especially at fuel cell level. Unfortunately, most previous reports focus on the ORR performance at rotating disk electrodes (RDE) level instead of membrane electrode assembly (MEA) level, making it harder to evaluate ORR catalysts operating under real vehicle conditions. Obviously, it is extremely necessary to develop an in-depth understanding of the structure-activity relationship of highly-efficient ORR catalysts applied at MEA level. In this work, an overview of the latest advances in ORR catalysts is provided with an emphasis on their performance at MEA level, hoping to cover the novel and systemic insights for innovative and efficient ORR catalyst design and applications in PEMFCs.

The Application of Ultrasonography-Computed Tomography Fusion Navigation Technology in Complex Bone Tumor Biopsy: A Randomized Double-Blind Controlled Trial.

OBJECTIVE: This study aims to investigate the clinical application value of ultrasonography-computed tomography (CT) fusion navigation technology in bone tumor biopsy surgery. METHODS: Thirty patients with bone tumors requiring biopsy surgery were randomly assigned to either the U-C group (ultrasonography-CT group; n = 15) or the control group (n = 15). The U-C group used ultrasonography-CT fusion navigation technology for real-time localization of the biopsy needle, whereas the control group relied on intraoperative C-arm fluoroscopy for localization. The success rate of the surgeries, the number of radiation exposures during the procedure, surgical time, and intraoperative blood loss were compared between the 2 groups. RESULTS: The number of intraoperative radiation exposures in the U-C group was 2 versus 7 in the control group (P < 0.05), showing significant differences between the 2 groups. The success rate of biopsies in the U-C group and control group was 100% (P > 0.05), the mean operative time was 45 ± 9 minutes versus 42 ± 13 minutes (P > 0.05), and intraoperative bleeding volume was 10 ± 4 mL versus 11 ± 5 mL (P > 0.05), all showing no significant differences between the 2 groups. CONCLUSIONS: The real-time localization of the biopsy needle in bone tumor biopsy surgery using ultrasonography-CT fusion navigation technology can significantly reduce intraoperative radiation exposure for both patients and surgeons during the procedure. Consequently, this technique holds certain clinical applicability.

Effect of heterogenous dopant and high temperature pulse excitation on ozone sensing behavior of In2O3 nanostructures and an image recognition method coupled to ozone sensing array.

Ground-level ozone (O3) is a primary air pollutant with potential adverse impacts on human health and ecosystems. Aiming to detect O3 concentration and develop efficient O3 sensing materials, sensing behavior of heterogenous cation (Fe3+, Sn4+ and Sb5+) doped In2O3 nanostructures was investigated. The incorporation of these cations modulated the electronic structure of semiconductor oxides, affecting the density of chemisorbed oxygen species and reactive sites. From O3 sensing results, Fe3+ doped In2O3 based sensors featuring saturated resistance curves in O3 gas, demonstrated fast sensing speed and qualified detection threshold (20 ppb). In contrast, Sn4+ and Sb5+ doped counterparts exhibited non-saturated sensing curves, resulting in slower response/recovery speed. As a proof-of-concept, these optimized sensors were integrated as the sensor array. Coupled to the image recognition technique, this sensor array could successfully discriminate O3 and NOx. That is, through the tailored combination of material modulation and sensor array, this study paves a novel approach for highly sensitive and selective O3 detection.

Dual-functionalization of fluorescent carbon dots via cyclodextrin and aminosilane for visual detection of ß-glucuronidase and bioimaging.

A sensitive method for the detection of ß-glucuronidase was established using functionalized carbon dots (ß-CD-SiCDs) as fluorescent probes. The ß-CD-SiCDs were found to be obtained through in situ autopolymerization by mixing the solutions of methyldopa, mono-6-ethylenediamine-ß-cyclodextrin and N-(ß-aminoethyl)-γ-aminopropyltrimethoxysilane at room temperature. The method has the characteristics of low energy consumption, simple and rapid. ß-CD-SiCDs exhibited green fluorescence at 515 nm emission with a quantum yield of 7.9 %. 4-nitrophenyl-ß-D-glucuronide was introduced as a substrate for ß-glucuronidase to generate p-nitrophenol. Subsequently, p-nitrophenol self-assembled with ß-CD-SiCDs through host-guest recognition to form a stable inclusion complex, resulting in the fluorescence quenching of ß-CD-SiCDs. The linear range of ß-CD-SiCDs for detecting ß-glucuronidase activity was 0.5-60 U L-1 with a detection limit of 0.14 U L-1. For on-site detection, gel reagents were prepared by a simple method and the images were visualized and quantified by taking advantage of smartphones, avoiding the use of large instrumentation. The constructed fluorescence sensing platform has the benefits of easy operation and time saving, and has been successfully used for the detection of ß-glucuronidase activity in serum and cell imaging.