Studies related to the chemical composition, biological activities and toxicity of methanolic extracts of noni (Morinda citrifolia) fruits and leaves.

Morinda citrifolia is a plant that grows in Brazilian northeast and presented a wide range of therapeutic, industrial and technological applications. Based on this, the aim of this work was to study the chemical composition, main biological activities and potential toxicity of its extracts, aiming their industrial application. Important compounds were identified in the methanolic extracts obtained by ultrasonic and Soxhlet extractions from leaves and fruits. GC × GC allowed for the identification of phytosterols, fatty acids and methyl esters, besides others (scopoletin, hydrocarbons, alcohols, terpenes). By HPLC-DAD, compounds like catechin, rutin, quercetin could be also identified and quantified. Their content of polyphenols and flavonoids was considered between the international standards. The extracts showed high antioxidant activities (EC50 ∼ 300 µg mL-1, using DPPH assay) compared with those from the literature. The extracts did not show toxicity or mutagenicity, but presented cytotoxicity, which can indicate their use safely in phytotherapic or nutritional applications.

Preliminary prospection of phytotherapic compounds from the essential oils from barks and leaves of Umburana (Commiphora Leptophloeos)

Abstract The potential of the biome caatinga (exclusive from northeastern Brazil) has been evaluated in recent research for application in the pharmaceutical industry. Among the species of medicinal plants from caatinga, one can highlight the Commiphora leptophloeos (umburana), which has been used as infusions and syrups by the regional population for inflammatory and infectious diseases. Essential oils from umburana leaves and barks were obtained in a Clevenger apparatus and analyzed by gas chromatography/mass spectrometry, and total phenolic and flavonoids were determined by spectrophotometric analysis. It was observed that a large part of the major compounds present in the essential oil is described as having antitumor activity, enabling research in investigational oncology with umburana (C. leptophloeos). In addition, some little explored components have been identified, such as cadinene, alpha-selinene, and elemenone. Despite being easily found in several plants, there are no clinical trials involving their biological activity in a well-defined isolated form, which could make exploring new studies possible. Furthermore, the presence of phenolic compounds and flavonoids allows future studies about the potential antimicrobial and antioxidant activity.

Influence of acquisition rate on performance of fast comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry for coconut fiber bio-oil characterization.

Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC × GC/TOFMS) is used to characterize complex bio-oil samples because of the high peak capacity associated with the high acquisition rate and mass spectra deconvolution capability of TOFMS. A recent application of fast GC × GC for this type of analysis improved sample throughput while achieving the same peak capacity without the use of cryogenic liquids. This work evaluates the effect of the TOFMS data acquisition rate on the quality of the analytical information obtained by GC × GC/TOFMS. In the analysis of coconut fiber bio-oil under fast GC × GC/TOFMS conditions, use of high data acquisition rates (200-300 Hz) increases the number of identifiable peaks by more than 50% compared with that achieved at the conventional rate of 100 Hz. The acquisition rate can affect the peak capacity by a factor of 3 or more. This is the first study to demonstrate the importance of optimizing the data acquisition rate, a parameter that has previously been neglected in the literature, in GC × GC/TOFMS development.

Towards the determination of an equivalent standard column set between cryogenic and flow-modulated comprehensive two-dimensional gas chromatography.

This preliminary research is focused on the task of defining an equivalent standard column set between cryogenic and flow-modulation comprehensive two-dimensional gas chromatography (GC × GC) combined with mass spectrometry (MS). Cryogenic modulation (CM) was carried out by using a loop-type device, while the flow modulator used was a seven-port wafer chip, equipped with an external accumulation loop. Initially, a common low-polarity + mid-polarity CM GC × GC column set was selected (30 m × 0.25 mm ID × 0.25 µm df + 1.5 m × 0.25 mm ID × 0.25 µm df), a method was developed, and a GC × GC-MS fingerprint was attained (on a sample of bio-oil derived from coconut fibers). After, a column set with the same stationary phases was selected for the flow modulation GC × GC-MS method (20 m × 0.18 mm ID × 0.18 µm df + 5 m × 0.32 mm ID × 0.25 µm df), with the capability to provide a-similar-as-possible separation. A side-by-side measurement of several chromatography parameters (efficiency, peak capacity, resolution, peak widths, retention factors, elution temperatures) was made.

Wine lees from the 1st and 2nd rackings: valuable by-products.

Phenolic compounds of the first and second racking wine lees, including anthocyanins, were qualitatively and quantitatively analyzed by HPLC-DAD-MS. Wine lees from both rackings displayed similar chromatographic profiles. Therefore, it was impossible to differentiate the qualitative results regarding phenolic compounds. On the other hand, those from the second racking presented, on average, concentration of polyphenols twice as high. While the ones from the first racking displayed ca. 1600 mg phenolic compounds and 400 mg anthocyanins per kg of dry matter, those from the second racking have shown ca. 3300 mg phenolic compounds and 700 mg anthocyanins per kg of dry matter. These outcomes indicate that, although the wine lees from the first racking can be employed as a resource for phenolic compounds recovery, those from the second racking are more appropriate for this purpose.

Bio-oil production of softwood and hardwood forest industry residues through fast and intermediate pyrolysis and its chromatographic characterization.

Bio-oils were produced through intermediate (IP) and fast pyrolysis (FP), using Eucalyptus sp. (hardwood) and Picea abies (softwood), wood wastes produced in large scale in Pulp and Paper industries. Characterization of these bio-oils was made using GC/qMS and GC×GC/TOFMS. The use of GC×GC provided a broader characterization of bio-oils and it allowed tracing potential markers of hardwood bio-oil, such as dimethoxy-phenols, which might co-elute in 1D-GC. Catalytic FP increased the percentage of aromatic hydrocarbons in P. abies bio-oil, indicating its potential for fuel production. However, the presence of polyaromatic hydrocarbons (PAH) draws attention to the need of a proper management of pyrolysis process in order to avoid the production of toxic compounds and also to the importance of GC×GC/TOFMS use to avoid co-elutions and consequent inaccuracies related to identification and quantification associated with GC/qMS. Ketones and phenols were the major bio-oil compounds and they might be applied to polymer production.

Monitoring the evolution of volatile compounds using gas chromatography during the stages of production of Moscatel sparkling wine.

This study reports, for the first time, the main changes that occur with some important aroma compounds of Moscatel sparkling wines during winemaking, measured using headspace solid-phase microextraction, one-dimensional and comprehensive two-dimensional gas chromatography (GC×GC) with mass spectrometry detection (MS). The best conditions of volatile extraction included the use of PDMS/DVB fibre, 2mL of wine, 30% of NaCl, 40°C for 30min. The chromatographic profile of sparkling wines showed decreasing amounts of monoterpenes (limonene, 4-terpineol, terpinolene, citronellol, α-terpineol, linalool, hotrienol, and nerol oxide), increasing amounts of esters (terpenyl esters, ethyl octanoate, ethyl decanoate and hexyl acetate) and alcohols (1-nonanol and 2-phenylethanol). Sixty-nine compounds co-eluted in the first dimension; only six co-eluted in the second dimension. GC×GC/TOFMS allows more detailed study of the volatile profile of sparkling wines.

Evaluation of Zygosaccharomyces bailii BCV 08 as a co-starter in wine fermentation for the improvement of ethyl esters production.

Zygosaccharomyces bailii BCV 08, a yeast isolated from red wine barrels in Brazil, was evaluated as co-starter in fermentations with Saccharomyces cerevisiae. Z. bailii BCV 08 was preliminarily shown to produce high levels of esters, and the production was optimized in bench and bioreactor scales using grape must. White wine vinifications were conducted with mixed cultures containing different proportions of Z. bailii BCV 08 and an enological strain of S. cerevisiae. In all trials that contained Z. bailii BCV 08, the production of ethyl esters was enhanced in comparison to the vinification control. Our results clearly show the potential of Z. bailii BCV 08 as a mixed starter with S. cerevisiae in order to increase the aromatic complexity of wine.

Determination of aromatic sulphur compounds in heavy gas oil by using (low-)flow modulated comprehensive two-dimensional gas chromatography-triple quadrupole mass spectrometry.

The present research is focused on the development of a flow-modulated comprehensive two-dimensional gas chromatography-triple quadrupole mass spectrometry (FM GC × GC-MS/MS) method for the determination of classes of aromatic organic sulphur compounds (benzothiophenes, dibenzothiophenes, and benzonaphthothiophene) in heavy gas oil (HGO). The MS/MS instrument was used to provide both full-scan and multiple-reaction-monitoring (MRM) data. Linear retention index (LRI) ranges were used to define the MRM windows for each chemical class. Calibration solutions (internal standard: 1-fluoronaphthalene) were prepared by using an HGO sample, depleted of S compounds. Calibration information was also derived for the thiophene class (along with MRM and LRI data), even though such constituents were not present in the HGO. Linearity was satisfactory over the analyzed concentration range (1-100 mg/L); intra-day precision for the lowest calibration point was always below 17%. Accuracy was also satisfactory, with a maximum percentage error of 3.5% (absolute value) found among the S classes subjected to (semi-)quantification. The highest limit of quantification was calculated to be 299 µg/L (for the C1-benzothiophene class), while the lowest was 21 µg/L (for the C4-benzothiophene class).

Attic dust assessment near a wood treatment plant: past air pollution and potential exposure.

The wood treatment process uses substances that generate hazardous compounds that may contaminate environmental compartments. In the present study, an area under influence of a deactivated wood treatment plant was investigated to evaluate past air pollution and to try to understand local air dispersion. Attic dust samples were collected from eight residences around the plant and from two residences outside this area, as reference samples. The presence of copper, chromium, arsenic, pentachlorophenol, sixteen priority polycyclic aromatic hydrocarbons and mutagenic activity using Salmonella/microsome assay was evaluated. The residences close to the entrance to the plant were the most affected, according to potentially toxic elements analysis. The PCP concentration was 0.49 mg/kg and the total PAHs content ranged from 0.40 to 13.31 µg/g with greater dispersion than potentially toxic elements. The highest mutagenesis values were 15,905 and 10,399 revertants/g of dust in the absence and presence of S9 mix (mammalian metabolic activation), respectively. Samples in which the total PAHs concentration was less than 2 µg/g no mutagenic effects were observed, including the residences in the reference area. The contribution of PAHs to mutagenesis was 10 percent, indicating that other compounds may contribute to the mutagenic effect. These results suggest that the population was or is potentially exposed to substances with strong effects on health.

Palladium(II) chemically bonded to silica surface applied to the separation and identification of polycyclic aromatic sulfur heterocycles in heavy oil.

Separation of polycyclic aromatic sulfur heterocycles among themselves and also from interferents in petrochemical matrices is a challenging task because of their low concentration, matrix complexity, and also due to the presence of polyaromatic hydrocarbons, as they present similar physico-chemical properties. Therefore, the objective of this work was preparation, characterization, and application of a stationary phase for separation of these compounds in a heavy gas oil sample and their identification by comprehensive two-dimensional gas chromatography. The stationary phase was prepared by grafting mercaptopropyltrimethoxisilane onto a silica surface, followed by palladium(II) chloride immobilization. Elemental analysis, thermogravimetry, nitrogen adsorption-desorption isotherms, infrared analysis, and scanning electron microscopy were performed to characterize this solid phase. Sulfur compounds were separated in an open column packed with the stationary phase and analyzed by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometric detection. The number of compounds tentatively identified was 314 and their classes were thiophenes, benzotiophenes, dibenzothiophenes, naphthothiophenes, benzonaphthothiophenes, and dinaphthothiophenes. Separation among sulfur compounds and polyaromatic hydrocarbons was successful, which is a difficult goal to achieve with the traditionally employed solid phases. Some recalcitrant compounds (dibenzothiophenes with substituents of two and four carbons) were fully separated and tentatively identified.

Comparison between pre-fractionation and fractionation process of heavy gas oil for determination of sulfur compounds using comprehensive two-dimensional gas chromatography.

The separation of the organic sulfur compounds (OSC) of petroleum or its heavy fractions is a critical step and is essential for the correct characterization of these compounds, especially due to similar physical and chemical properties of polycyclic aromatic sulfur heterocycles (PASH) and polycyclic aromatic hydrocarbons (PAH). This similarity results in coelutions among PAH and PASH and for this reason former steps of fractionation are required before gas chromatographic analysis. The objective of this study was to evaluate the potential of GC×GC for the separation and identification of OSC in a heavy gas oil sample without fractionation, after pre-fractionation in an alumina column and also after fractionation process. This last one was performed with a modified stationary phase manufactured and characterized in the laboratory, called Pd(II)-MPSG, where palladium is chemically linked to silica through mercaptopropyl groups. The fractions obtained from both procedures were analyzed by GC×GC/TOFMS, which was effective to separate and identify various classes of OSC. A hundred and thirty-five compounds were tentatively identified in the sample that was only pre-fractionated. However, when the fractionation was also performed with the Pd(II)-MPSG phase, a larger number of sulfur compounds were found (317). Results have shown that the analysis of a pre-fractionated sample by GC×GC/TOFMS is suitable when the goal is a general characterization of classes of compounds in the sample, while a more detailed analysis of PASH can be performed, using also the fractionation Pd(II)-MPSG phase. GC×GC/TOFMS played a major role in the comparison of samples obtained from pre-fractionation and fractionation steps due to its high peak capacity, selectivity, organized distribution of chromatographic peaks and resolution.

Genotoxic and mutagenic properties of Bauhinia platypetala extract, a traditional Brazilian medicinal plant.

ETHNOPHARMACOLOGICAL RELEVANCE: Bauhinia platypetala Burch. is a traditionally used Brazilian medicinal plant, although no evidence in the literature substantiates the safety of its use. AIM OF THE STUDY: The aim of this study was to investigate the safety of the ethanolic extract and the ethereal fraction of B. platypetala leaves. MATERIALS AND METHODS: The identification of chemical compounds from the B. platypetala ethanolic extract and its ethereal fraction was performed by GC/MS and ESI-MS/MS. The plant's toxicological, cytotoxic, mutagenic and genotoxic properties were determined in Saccharomyces cerevisiae strains and V79 cell culture by survival assays and comet assay. RESULTS: The major compound identified in the B. platypetala ethanolic extract is palmitic acid, kaempferitirin and quercitrin, while the B. platypetala ethereal fraction was found to be rich in phytol, gamma-sitosterol and vitamin E. Moreover, the results indicated that the B. platypetala ethanolic extract has an anti-oxidative effect against H(2)O(2) in yeast. In addition, the B. platypetala ethanolic extract did not induce mutagenic effects on the S. cerevisiae N123 strain, but the ethereal fraction of B. platypetala at higher concentrations (250-500 µg/mL) induced cytotoxicity and mutagenicity. A slight cytotoxic effect was observed in mammalian V79 cells; however, both the B. platypetala ethanolic extract and its ethereal fraction were able to induce DNA strand breaks in V79 cells, as detected by the alkaline comet assay. CONCLUSION: The B. platypetala ethanolic extract has antioxidant action and showed absence of mutagenic effects in yeast S. cerevisiae. On the other hand B. platypetala ethereal fraction is mutagenic and does not show antioxidant activity in yeast. In mammalian cells B. platypetala ethanolic extract and it's ethereal fraction induce cyotoxic and genotoxic action.

Evaluation of surface sediment contamination by polycyclic aromatic hydrocarbons in the "Saco do Laranjal"--(Patos Lagoon, Brazil).

This paper evaluates the concentration of Polyaromatic hydrocarbons - PAHs in the Estuarine area of the Patos Lagoon, more precisely in a local named "Saco do Laranjal" in Pelotas City (southern Brazil). The samples were collected in May 2008. The concentrations of 16 US-EPA priority polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography with a mass spectrometry detector (GC/MS). The sum of PAHs concentration ranged from 7.3 to 92.8 µg kg(-1) in dry weight. The positive correlation (Pearson test) between the total organic material (TOM) and the total PAH concentration (0.98) suggests that TOM plays an important role in controlling the PAHs levels in the sediments. According to the observed ratios of individual PAHs, the contamination in the studied area is originated, predominantly pyrolytic sources. The values found are considered under normal levels and indicates a not impacted area.

Antidepressant-like effects of methanol extract of Hibiscus tiliaceus flowers in mice.

BACKGROUND: Hibiscus tiliaceus L. (Malvaceae) is used in postpartum disorders. Our purpose was to examine the antidepressant, anxiolytic and sedative actions of the methanol extract of H. tiliaceus flowers using animal models. METHODS: Adult male Swiss albino mice were treated with saline, standard drugs or methanol extract of H. tiliaceus and then subjected to behavioral tests. The forced swimming and tail suspension tests were used as predictive animal models of antidepressant activity, where the time of immobility was considered. The animals were submitted to the elevated plus-maze and ketamine-induced sleeping time to assess anxiolytic and sedative activities, respectively. RESULTS: Methanol extract of H. tiliaceus significantly decreased the duration of immobility in both animal models of antidepressant activity, forced swimming and tail suspension tests. This extract did not potentiate the effect of ketamine-induced hypnosis, as determined by the time to onset and duration of sleeping time. CONCLUSION: Our results indicate an antidepressant-like profile of action for the extract of Hibiscus tiliaceus without sedative side effect.

Identification of organic sulfur compounds in coal bitumen obtained by different extraction techniques using comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometric detection.

The determination of organic sulfur compounds (OSC) in coal is of great interest. Technically and operationally these compounds are not easily removed and promote corrosion of equipment. Environmentally, the burning of sulfur compounds leads to the emission of SO(x) gases, which are major contributors to acid rain. Health-wise, it is well known that these compounds have mutagenic and carcinogenic properties. Bitumen can be extracted from coal by different techniques, and use of gas chromatography coupled to mass spectrometric detection enables identification of compounds present in coal extracts. The OSC from three different bitumens were tentatively identified by use of three different extraction techniques: accelerated solvent extraction (ASE), ultrasonic extraction (UE), and supercritical-fluid extraction (SFE). Results obtained from one-dimensional gas chromatography (1D GC) coupled to quadrupole mass spectrometric detection (GC-qMS) and from two-dimensional gas chromatography with time-of-flight mass spectrometric detection (GC × GC-TOFMS) were compared. By use of 2D GC, a greater number of OSC were found in ASE bitumen than in SFE and UE bitumens. No OSC were identified with 1D GC-qMS, although some benzothiophenes and dibenzothiophenes were detected by use of EIM and SIM modes. GC × GC-TOFMS applied to investigation of OSC in bitumens resulted in analytical improvement, as more OSC classes and compounds were identified (thiols, sulfides, thiophenes, naphthothiophenes, benzothiophenes, and benzonaphthothiophenes). The roof-tile effect was observed for OSC and PAH in all bitumens. Several co-elutions among analytes and with matrix interferents were solved by use of GC × GC.

Evaluation of comprehensive two-dimensional gas chromatography with micro-electron capture detection for the analysis of seven pesticides in sediment samples.

A GC-µECD and a GC×GC-µECD method were developed for the analysis of pesticides in sediments. For 1D-GC, instrumental LOD and LOQ were found in the range from 0.60 to 2.31µgL(-1) and 1.83 to 5.62µgL(-1), respectively. For GC×GC method development two sets of columns were tested (DB-5/DB-17ms, and HP-50+/DB-1ms), and the best results were obtained with the set of columns DB-5/DB-17ms. Instrumental LOD and LOQ were found in the range from 0.08 to 1.07µgL(-1) and 0.25 to 3.23µgL(-1), respectively. The LOD for the GC×GC was about 36% lower than those obtained for the 1D-GC. Concentrations of 21.18µgkg(-1) through 1D-GC method and 3.34µgkg(-1) for GC×GC for trifloxystrobin were found in a sediment sample which was collected close to an area of rice plantation.

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography.

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.

Characterization of the yerba mate (Ilex paraguariensis) volatile fraction using solid-phase microextraction-comprehensive 2-D GC-MS.

The present research is focused on the use of a solid-phase microextraction-comprehensive 2-D GC methodology, in the analysis of the volatile fraction of yerba mate. Yerba mate is used for the generation of a tea-like beverage, widely consumed in South America. A rapid-scanning quadrupole mass spectrometer (qMS), employed as a detection system and operated at a 25 Hz scanning frequency, supplied high-quality mass spectra. The effectiveness of the 3-D comprehensive 2-D GC-qMS experiment was compared to that of GC-qMS analysis on the same sample. Peak identification, in both applications, was achieved through MS library matching, with the support of linear retention index data. Apart from a great increase in the number of analytes separated (approx. by a factor of 5) and identified (approx. by a factor of 3.5), the comprehensive 2-D GC-qMS approach enabled the determination of a high number of hazardous contaminants (aliphatic hydrocarbons, polycyclic aromatic hydrocarbons, and plasticizers), barely visible in the GC-qMS analysis.

High efficiency liquid chromatography techniques coupled to mass spectrometry for the characterization of mate extracts.

There is growing interest related to rapid screening and full characterization of the constituents of plants with medicinal properties; among these, "Mate" or Yerba Maté is a tea-like beverage widely consumed in South America, obtained from the dried leaves of Ilex paraguariensis. The high content in polyphenols accounts for in vitro and in vivo antioxidant activity of the extracts obtained from this plant; on the other hand, the high complexity of the samples extracted, depending on the method employed, may preclude complete resolution by conventional HPLC techniques. For this purpose, a comprehensive two-dimensional liquid chromatography (LC x LC) system, comprised of an RP-Amide first dimension and a partially porous octadecylsilica column in the second dimension, has been compared with a one-dimensional system. The latter was operated using a partially porous octadecylsilica column, with diode array (DAD) and electrospray/ion trap-time of flight (ESI/IT-TOF) detection for the most complex extracts. The employment of the hybrid mass spectrometer allowed unequivocal identification of several compounds in the mate extracts. Using LC x LC-MS(3), it was possible to discriminate between congeners of chlorogenic acids, along with monoacyl- and diacylchlorogenic acid esters.