A high-density and high-confinement tokamak plasma regime for fusion energy.

The tokamak approach, utilizing a toroidal magnetic field configuration to confine a hot plasma, is one of the most promising designs for developing reactors that can exploit nuclear fusion to generate electrical energy1,2. To reach the goal of an economical reactor, most tokamak reactor designs3-10 simultaneously require reaching a plasma line-averaged density above an empirical limit-the so-called Greenwald density11-and attaining an energy confinement quality better than the standard high-confinement mode12,13. However, such an operating regime has never been verified in experiments. In addition, a long-standing challenge in the high-confinement mode has been the compatibility between a high-performance core and avoiding large, transient edge perturbations that can cause very high heat loads on the plasma-facing-components in tokamaks. Here we report the demonstration of stable tokamak plasmas with a line-averaged density approximately 20% above the Greenwald density and an energy confinement quality of approximately 50% better than the standard high-confinement mode, which was realized by taking advantage of the enhanced suppression of turbulent transport granted by high density-gradients in the high-poloidal-beta scenario14,15. Furthermore, our experimental results show an integration of very low edge transient perturbations with the high normalized density and confinement core. The operating regime we report supports some critical requirements in many fusion reactor designs all over the world and opens a potential avenue to an operating point for producing economically attractive fusion energy.

Evidence of Electron Heating by Alpha Particles in JET Deuterium-Tritium Plasmas.

The fusion-born alpha particle heating in magnetically confined fusion machines is a high priority subject for studies. The self-heating of thermonuclear fusion plasma by alpha particles was observed in recent deuterium-tritium (D-T) experiments on the joint European torus. This observation was possible by conducting so-called "afterglow" experiments where transient high fusion yield was achieved with neutral beam injection as the only external heating source, and then termination of the heating at peak performance. This allowed the first direct evidence for electron heating of plasmas by fusion-born alphas to be obtained. Interpretive transport modeling of the relevant D-T and reference deuterium discharges is consistent with the alpha particle heating observation.

Lost alpha Faraday cup foil noise characterization during Joint European Torus plasma post-processing analysis.

Capacitive plasma pickup is a well-known and difficult problem for plasma-facing edge diagnostics. This problem must be addressed to ensure an accurate and robust interpretation of the real signal measurements vs noise. The Faraday cup fast ion loss detector array of the Joint European Torus (JET) is particularly prone to this issue and can be used as a testbed to prototype solutions. The issue of separation and distinction between warranted fast ion signal and electromagnetic plasma noise has traditionally been solved with hardware modifications, but a more versatile post-processing approach is of great interest. This work presents post-processing techniques to characterize the signal noise. While hardware changes and advancements may be limited, the combination with post-processing procedures allows for more rapid and robust analysis of measurements. The characterization of plasma pickup noise is examined for alpha losses in a discharge from JET's tritium campaign. In addition to highlighting the post-processing methodology, the spatial sensitivity of the detector array is also examined, which presents significant advantages for the physical interpretation of fast ion losses.

JET diagnostic enhancements testing and commissioning in preparation for DT scientific campaigns.

In order to optimize the scientific exploitation of JET (Joint European Torus) during the upcoming deuterium-tritium experiments, a set of diagnostic systems is being enhanced. These upgrades focus mainly on the experimental and operational conditions expected during tritium campaigns. It should be stressed that measurements relevant for burning plasmas are specifically targeted. Previously non-available capabilities, such as a current measurement system fully covering all poloidal field circuits, are described in detail. Instrument descriptions, performance prediction, testing, and initial commissioning results of these systems are presented.

Molecular cloning and expression analysis of three omega-6 desaturase genes from purslane (Portulaca oleracea L.).

Two full-length cDNA clones of PoleFAD2 and one full-length cDNA clone of PoleFAD6, encoding omega-6 fatty acid desaturases, the key enzymes for the conversion of oleic into linoleic acid, were isolated from purslane (Portulaca oleracea L.) leaves and seeds. The deduced amino acid sequence of both isoforms of PoleFAD2 showed higher similarities to other microsomal omega-6 desaturases then to PoleFAD6 or other plastidial orthologues, and vice versa. Expression analysis by RT-PCR showed that all genes are expressed in all tissues of purslane tested, but higher levels of mRNA accumulation were detected in reproductive organs and cells that proliferate rapidly or store lipids. Wounding affected the levels of mRNA accumulation of both, FAD2 and FAD6 genes in purslane leaves, while chilling stress affected only FAD2 transcript level. The expression patterns observed reflect the discrete roles of these genes in membrane synthesis for cell division, thylakoid development, and lipid storage or in the biosynthetic pathway for the production of signaling molecules that influence plant development or defense.