A Three-Dimensional Evaluation of Skeletal and Dentoalveolar Changes in Growing Class II Patients after Functional Appliance Therapy: A Retrospective Case-Control Study.

Background: The aim was to assess three-dimensionally mandibular and maxillary changes in growing Class II patients treated with removable functional appliances followed by fixed appliances. Methods: Twenty-four Class II patients (age range: 9 to 14, mean: 12.1 ± 1.1 years) treated with removable functional appliances followed by fixed appliances (functional appliance group-FAG) were retrospectively selected and compared to an age-matched control group (CG) treated with fixed appliances only. To be included in the study, pre- and post-treatment CBCT scans had to be available. The CBCTs were used to analyze, in 3D, the changes following treatment and growth. Results: Before treatment, overjet (FAG: 9 mm ± 2.8 (mean ± standard deviation); CG: 4 mm ± 1.7), ANB (FAG: 5.7° ± 2.0; CG: 3.2° ± 1.4), and effective mandibular length (FAG: 113.0 mm ± 4.1; CG: 116.6 mm ± 5.9) were statistically significantly different between the two groups. After treatment, overjet (FAG: -6.8 mm ± 2.8; CG: -1.8 mm ± 1.8) and effective mandibular length (FAG: 6.3 mm ± 2.6; CG: 3.9 mm ± 2.6) statistically significantly changed. There was a significant difference in the treatment effect between the FAG and the CG in overjet, ANB, and effective mandibular length. Conclusions: The results indicate that functional appliances are effective in correcting Class II malocclusions. The growth modification in the FAG resulted in an increase in mandibular length. Yet, the final length of the mandible in the FAG was smaller when compared to the CG.

Changes in the Adaptive Cellular Repertoire after Infection with Different SARS-CoV-2 VOCs in a Cohort of Vaccinated Healthcare Workers.

BACKGROUND: Currently approved vaccines are highly effective in protecting against hospitalization and severe COVID-19 infections. How pre-existing immunity responds to new variants with mutated antigens is crucial information for elucidating the functional interplay between antibodies and B and T cell responses during infection with new SARS-CoV-2 variants. METHODS: In this study, we monitored the dynamics and persistence of the immune response versus different SARS-CoV-2 variants of concern that emerged during the pandemic period (2021-2022) in a cohort of vaccinated healthcare workers, who experienced breakthrough infection in the Pre-Delta, Delta, and Omicron waves. We evaluated both the humoral and cell-mediated responses after infection. We also evaluated the anti-SARS-CoV-2 antibodies levels produced by infection in comparison with those produced after vaccination. RESULTS: Our results highlighted that the immune response against the Delta VOC mainly involved an adaptive humoral and switched memory B cells component, even 3 months after the last vaccine dose, conversely showing a high percentage of depleted adaptive T cells. Omicron infections triggered a consistent production of non-vaccine-associated anti-N antibodies, probably to balance the spike epitope immune escape mechanisms. CONCLUSION: Our results suggest a direct dependence between the VOC and different humoral and B and T cell balances in the post-infection period, despite the administration of a different number of vaccine doses and the elapsed time since the last vaccination.

Stability, survival, patient satisfaction, and cost-minimization of CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 2-year follow-up of a two-centre randomized controlled trial.

BACKGROUND: CAD/CAM (computer-aided design/computer-aided manufacturing) fixed retainers (FRs) as an alternative to multistranded FRs to maintain orthodontic treatment outcome. OBJECTIVES: The primary aim was to compare CAD/CAM versus conventional multistranded FRs in terms of stability until 2 years. Secondary outcomes were failure rates, patient satisfaction, and cost-minimization. TRIAL DESIGN: 2-arm parallel, two-centre randomized controlled trial. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in a 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. FRs were bonded at the end of treatment, and patients were recalled after 12 and 24 months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. Cost-minimization analysis was undertaken. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): 90 in CAD/CAM and 91 in conventional group. One hundred and fifty three patients attended T24 follow-up. There were no significant differences in LII and arch dimensions between groups for failure-free patients. Within 24 months, 34% maxillary CAD/CAM FRs and 38% maxillary conventional FRs failed, along with 42% mandibular CAD/CAM FRs and 40% mandibular conventional FRs, with no significant difference in survival between groups (hazard ratios conventional to CAD/CAM: maxillary arch: 1.20 [P = 0.46], mandibular arch: 0.98 [P = 0.94]). There were no significant differences in patient satisfaction between groups. No harms were observed. Cost-minimization analysis showed that CAD/CAM FRs were slightly cheaper than conventional FRs. CONCLUSIONS: There were no clinically significant differences in LII, arch widths, and lengths between CAD/CAM and conventional FRs after 24 months. There were no differences in failures and patient satisfaction between groups. CAD/CAM FRs were slightly cheaper than conventional FRs. TRIAL REGISTRATION: ClinicalTrials.gov NCT04389879.

Health-related quality of life, jaw function and sleep-disordered breathing among patients with dentofacial deformity.

BACKGROUND AND OBJECTIVES: Patients with dentofacial deformity (DFD) requiring orthognathic treatment have poor aesthetics, jaw function and psychological well-being, which potentially affect the quality of life. This study aimed to investigate the health-related general, oral and orthognathic quality of life, jaw function and sleep-disordered breathing at different stages of orthognathic surgical treatment. METHODS: A total of 120 consecutive patients with DFD were recruited and grouped as pre-orthodontic treatment (group 1), pre-surgery (group 2), 4 months post-surgery (group 3), 24 months post-surgery (group 4) and in addition 30 controls without DFD (group 0). Outcomes were assessed using general health Short Form Survey (SF-36), Oral Health Impact (OHIP-14), Orthognathic Quality of Life Questionnaire (OQLQ), STOP-Bang and Jaw Function Limitation Scale (JFLS) questionnaires. In addition, presence or absence of pain was recorded. Data were tested with analysis of variance, Kruskal-Wallis test, Tukey post hoc test and structural equation modelling (SEM). RESULTS: Results revealed SF-36 (p = .814) and STOP-Bang (p = .143) total scores did not differ between control and treatment groups. In contrast, OHIP-14, OQLQ and JFLS total scores differed between groups (p = .001). Higher scores were observed in groups 1 (p = .001), 2 (p = .001) and 3 (p = .041) compared to group 0, indicating poor oral health in patients with DFD. Importantly, in group 4, oral health-related quality of life was better, and OHIP-14 (p = .936) and JFLS (p = .572) scores did not differ from controls. OQLQ scores of group 4 were significantly lower than group 1 (p = .001) but higher than group 0 (p = .013). SEM results revealed a significant negative associations of pain with JFLS and OQLQ; OHIP-14 with OQLQ; OHIP-14 with SF-36; and finally STOP-Bang with SF-36. Positive associations were observed between JFLS and OHIP-14; OHIP-14 and OQLQ. CONCLUSION: Oral health-related quality of life and jaw function appears to be improved 24 months after orthognathic surgery. Pain and limitation in jaw function had a negative association with health-related quality of life.

Finding the missing many: improving Tuberculosis care in Kajiado county through active case finding and community approaches.

BACKGROUND: Tuberculosis related deaths remain a priority globally. Despite advancements in TB care, access to quality care remains inequitable to the disadvantage of those in rural and urban informal settlements. The Awareness, Traditions, and Innovation in combating Tuberculosis (ATI TB) project incorporated active case finding (ACF), use of GeneXpert technology and decentralized services to improve TB care in Kajiado County. This study sought to establish the impact of the project as well as implementation lessons learnt during its tenure in Kajiado County, Kenya. METHODS: This evaluation adopted a mixed-methods approach with retrospective cohort analysis for the quantitative data and qualitative data sought through key informant interviews with 28 purposively sampled respondents. The qualitative data was analyzed thematically using Taguette while quantitative data was analyzed using R Software yielding descriptive statistics and measures of association. RESULTS: While the males were a minority among the presumptive cases (623; 46%), they were the majority (59.3%) among the confirmed TB cases. 70% of the confirmed cases were aged between 15 and 44 years; with those aged between 25- and 34-years being majority (30% of the cases). Majority of the confirmed cases within the project were from rural Kajiado West (79; 66.9%). Though 61% of the presumptive cases were through ACF, only 7% of these tested positive. Conversely, 13% of the self-referrals tested positive. 53% (66) of the positive cases with valid data were self-referrals while ACF accounted for 47% (58) of the positives. CONCLUSION: Continued capacity development among health workers, sustained and targeted sensitization and screening among vulnerable groups, strategic collaborations, alongside increased budgetary prioritization of health and TB care by government and partners, and government investments in Social Determinants of Health can ensure gains in TB care are sustained.

Apical incisor root resorption due to ectopic maxillary canine eruption: Association with time of diagnosis and type of intervention in a retrospective population-based cohort study.

OBJECTIVES: The primary aim was to study upper incisor severe apical root resorption (RR) related to ectopic canine eruption and its association with timing of diagnosis and type of intervention conducted. The secondary aim was to correlate resorption with other dental anomalies. MATERIALS AND METHODS: Digital journals and radiographic material of all ectopic maxillary canines registered in 2012 in the regional public paediatric dental clinics in the Council of Aarhus were inspected retrospectively. Data related to 10 variables were retrieved. Post-treatment radiographs were used for evaluation of incisor RR. RESULTS: A total of 260 ectopic maxillary canines were diagnosed in 2012. The majority were found in the 9-13-year-old age group (0.8% prevalence within the total population). In all, 244 canines were assessed for eligibility and 181 had adequate final radiographs for evaluation of RR. Among ectopic maxillary canines, 9.4% caused severe incisor RR to neighbouring teeth. Timely palpation for canine eruption significantly reduced the odds for upper incisor resorption by 80%. Multiple regression showed that when the permanent canine cannot be palpated and the deciduous has been extracted, delaying the first X-rays was associated with a 38% odds ratio increase for RR for each year of delay after the age of 10 years. No significant associations were found between incisor RR and intervention conducted or other dental anomalies. CONCLUSION: Palpation of erupting maxillary canines is crucial for timely diagnosis of ectopic eruption and initiation of treatment to avoid RR. If the canine cannot be palpated at 10 years of age, radiographic examination is highly recommendable.

Striving for Perfection: How Stable Is Orthodontic Treatment When Excellent Outcomes Are Achieved? A 9-Year Post-Treatment Retrospective Study.

(1) Aims: The main objective of this retrospective study was to assess the long-term stability of difficult orthodontic treatments treated to an excellent result and to correlate stability to possible prognostic factors. Secondary objectives were to observe the changes in retention protocol over time and to assess Oral Health-related Quality of Life (OHRQoL) after a long-term post-treatment follow-up. (2) Methods: Cases presented for final examination by orthodontic postgraduate students were retrospectively screened for eligibility. Eligible patients were recalled for a post-treatment recall appointment (T2), consisting of a clinical examination and intraoral scan, and were asked to complete the Oral Health Impact Profile-14 (OHIP-14-DK). Gender, age at treatment commencement (T0), treatment modality and duration, and retention protocol were extracted from the records. At T2, the duration of the retention period was recorded, and retainers in place were clinically compared to the original retention protocol. The following variables were assessed on the sets of models at T0, T1 (end of treatment), and T2: arch length and width, overjet and overbite, Dental Aesthetic Index (DAI), Peer Assessment Rating score (PAR), and Little's Irregularity Index (LII). Multiple regression models were conducted. (3) Results: Eighty-five subjects attended T2. The mean post-treatment follow-up was 9.4 years +/- 2.4. In the upper arch, at T1, 74 patients had a combination of fixed and removable retainers, while at T2, 55 had a fixed retainer only. In the lower arch, at T1, 67 patients had a fixed retainer only, with this number increasing to 76 at T2. From T0 to T1, the PAR score improved by 96.1%, with the improvement remaining at 77.5% at T2. The stability of lower inter-canine and upper inter-premolar widths was significantly correlated with the extent of changes during treatment. The presence of a lower fixed retainer at T2 and a low LII at T1 were prognostic factors for stability. The mean weighted total OHIP-14 score at T2 was very low (1.6 ± 2.4 points). (4) Conclusions: In a sample with an initial high-severity malocclusion and treated to an excellent outcome, long-term stability was very good. Good stability can be retained when a lower fixed retainer is present at T2 and when a low LII is achieved at T1.

Malaria parasite prevalence among migrants: a systematic review and meta-analysis.

BACKGROUND: Asymptomatic malaria infections are highly prevalent in endemic areas. OBJECTIVES: This systematic review aimed to estimate the pooled prevalence of malaria parasites in migrants screened in non-endemic areas. DATA SOURCES: MEDLINE-Ovid, EMBASE, Web of Science, Global Health, Lilacs, Cochrane, and MedRxiv. STUDY ELIGIBILITY CRITERIA: Cross-sectional studies and observational prospective or retrospective cohort studies conducted in Europe, USA, Canada, Australia, or New Zealand regardless of language or publication status. Studies should include prevalence data on malaria in migrants that were recruited through a systematic screening approach. We excluded studies where people were tested because of malaria symptoms. PARTICIPANTS: Migrant individuals exposed to malaria infection ASSESSMENT OF RISK OF BIAS: A standardized and validated appraisal instrument was used for studies reporting prevalence data (Joanna Briggs Institute Manual for Evidence Synthesis). METHODS OF DATA SYNTHESIS: Pooled estimates of the parasite prevalence by PCR, microscopy, and rapid diagnostic test (RDT) were calculated with a random-effects model. Heterogeneity was explored by stratification by age, region of origin, period of study, and quality of studies. RESULTS: Of 1819 studies retrieved, 23 studies were included with in total 4203 participant PCR data, 3186 microscopy and 4698 RDT data, respectively. Migrants from sub-Saharan Africa had a malaria parasite prevalence of 8.3% (95% CI 5.1-12.2) by PCR, 4.3% (1.5-8.2) by RDT, and 3.1% (0.7-6.8) by microscopy. For migrants from Asia and Latin America, the prevalence with PCR was 0% (0.0-0.08) and 0.4% (0.0-1.8), respectively. Migrants from the Central African Region had the highest PCR prevalence (9.3% [6.0-13.0]), followed by West African migrants (2.0% [0.0-7.7]). Restricting the analysis to sub-Saharan Africa migrants arriving to the host country within the previous year, the PCR-based prevalence was 11.6% (6.9-17.4). CONCLUSION: We provide estimates on the malaria parasite prevalence in migrants in non-endemic setting. Despite heterogeneity between settings, these findings can contribute to inform screening strategies and guidelines targeting malaria in migrants.

Burden of Pulmonary Rifampicin-Resistant Tuberculosis in Kajiado, Kenya: An Observational Study.

BACKGROUND: Rifampicin resistance (RR) is a major challenge in the clinical management of tuberculosis (TB), but data on its prevalence are still sparse in many countries. Our study aimed at estimating the prevalence of RR-TB in Kajiado County, Kenya. Secondary objectives were to estimate the incidence of pulmonary TB in adults and the rate of HIV-TB coinfection. METHODS: We conducted an observational study in the context of the ATI-TB Project, carried out in Kajiado. The project was based on an active-case-finding campaign implemented with the aid of village chiefs, traditional healers and community health volunteers. Diagnosis relied on Xpert MTB/RIF, including a mobile machine that could be used to cover areas where testing would otherwise be difficult. RESULTS: In sum, 3840 adults were screened for active TB during the campaign. RR cases among all TB diagnoses were 4.6%. The annual incidence of pulmonary TB among adults was 521 cases per 100,000 population. The rate of HIV coinfection was 22.2% among pulmonary TB diagnoses. CONCLUSION: The prevalence of RR-TB was four times that what could be inferred from official notifications in Kajiado, and higher than overall prevalence in Kenya. In addition, our estimate of incidence of pulmonary TB in adults in Kajiado significantly differed from cases notified in the same area. In contrast, the rate of HIV coinfection was in line with national and regional data. TB diagnostic capability must be strengthened in Kajiado to improve patients' management and public health interventions.

Can haematological changes constitute a surrogate diagnostic parameter to detect schistosomiasis in migrants and travellers? - A retrospective analysis.

Background: Earlier studies found characteristic haematological changes in African patients with active schistosomiasis. If consistently present, full blood counts (FBC) may be helpful to diagnose schistosomiasis also in migrants and returning travellers. Methods: A retrospective patient record review was conducted on data from seven European travel clinics, comparing FBC of Schistosoma egg-positive travellers and migrants to reference values. Sub-analyses were performed for children, returned travellers, migrants and different Schistosoma species. Results: Data analysis included 382 subjects (median age 21.0 years [range 2-73]). In returned travellers, decreases in means of haemoglobin particularly in females (ß = -0.82 g/dL, p = 0.005), MCV (ß = -1.6 fL, p = 0.009), basophils, neutrophils, lymphocytes and monocytes (ß = -0.07, p < 0.001; -0.57, p = 0.012; -0.57, p < 0.001 and -0.13 103/µL, p < 0.001, respectively) were observed. As expected, eosinophils were increased (ß = +0.45 103/µL, p < 0.001). In migrants, a similar FBC profile was observed, yet thrombocytes and leukocytes were significantly lower in migrants (ß = -48 103/µL p < 0.001 and ß = -2.35 103/µL, p < 0.001, respectively). Conclusions: Active egg-producing Schistosoma infections are associated with haematological alterations in returned travellers and migrants. However, these differences are discrete and seem to vary among disease stage and Schistosoma species. Therefore, the FBC is unsuitable as a surrogate diagnostic parameter to detect schistosomiasis.

Associations between temporomandibular disorders, pain, jaw and masticatory function in dentofacial deformity patients: A cross-sectional study.

BACKGROUND AND OBJECTIVE: Patients with dentofacial deformity often present with impaired masticatory function, orofacial pain and temporomandibular disorders (TMD). This study investigates the relationship between TMD, pain, jaw and masticatory function at different stages of orthognathic surgical (OS) treatment. METHODS: A total of 120 OS patients were prospectively recruited and grouped as pre-orthodontic (group 1), pre-surgery (group 2), 4-month post-surgery (group 3), 24-month post-surgery (group 4), in addition to 30 controls (group 0). Outcomes were assessed using: Jaw Function Limitation Scale (JFLS), McGill pain questionnaire, DC/TMD instrument, voluntary maximum bite force (MVBF), and masticatory efficiency (ME) using two-coloured chewing gum. Data were analysed using structural equation modelling. RESULTS: The prevalence of non-painful TMD did not differ between groups (p = .827). However, the prevalence of painful TMD differed between groups (p = .001). Among the painful TMDs, the highest prevalence was observed for masseter myalgia in group 2 (p = .031), and importantly group 4 did not differ from group 0 (p = .948). The MPQ score was significantly higher in group 1 (p = .001) compared to group 0, and the JFLS score was significantly higher in groups 1, 2 and 3 compared to group 0. Notably, MPQ (p = .756) and JFLS (p = .572) scores in group 4 were not different from group 0. However, MVBF (p = .996) and ME (p = .991) did not differ between groups 1 and 4. The association of self-reported pain and jaw function with the masticatory function was observed in OS patients. CONCLUSION: OS was not associated with a negative impact on TMD. Jaw function and pain levels were similar to controls at the 24-month follow-up. The masticatory function was further affected by the surgery and seems to require a longer recovery time. Moreover, it was confirmed that pain and TMD were associated with limitations in jaw function and impacts on masticatory function.

Stability, survival, and patient satisfaction with CAD/CAM versus conventional multistranded fixed retainers in orthodontic patients: a 6-month follow-up of a two-centre randomized controlled clinical trial.

OBJECTIVES: The primary aim of this two-arm parallel two-centre randomized controlled trial was to compare computer-aided design and computer-aided manufacturing (CAD/CAM) versus conventional multistranded fixed retainers (FRs) in terms of stability over 6 months. Secondary outcomes were failure rates and patient satisfaction. METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. Retainers were bonded at the end of orthodontic treatment (T0), and patients were recalled after 1 (T1), 3 (T3), and 6 (T6) months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little's Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): Ninety in the CAD/CAM group and 91 in the conventional group. Three subjects dropped out at baseline, as they did not attend any of the follow-up appointments.168 patients attended the T6 visit. There were no significant differences in arch dimensions between T0 and T6, whilst the LII was different only in the CAD/CAM group (mean difference: 0.2 mm; 95% confidence interval: 0.1 to 0.4; P < 0.001). Within 6 months, 39 upper retainers (19 out of 88 CAD/CAM and 20 out of 90 conventional retainers) and 52 lower retainers failed (26 out of 88 CAD/CAM and 26 out of 90 conventional retainers), with no significant difference between the survival of both types of retainers (hazard ratios conventional to CAD/CAM: upper arch: 0.99 [P =0.99], lower arch: 0.93 [P = 0.80]). There were no significant changes in patient satisfaction between the groups. No harms were observed. CONCLUSIONS: There were no clinically significant differences in LII, arch widths and lengths between CAD/CAM and conventional retainers after 6 months. There was no difference in failures and in patient satisfaction between both types of FRs. REGISTRATION: ClinicalTrials.gov NCT04389879.

Intrusion of overerupted periodontally compromised posterior teeth using orthodontic mini implants: A mechanobiological finite element study.

INTRODUCTION: The intrusion of posterior teeth had been considered challenging up to the development of orthodontic mini implants. In periodontally compromised teeth, the challenge is even greater, because of the root resorption risk due to periodontal ligament over-compression. Still, the precise strategy to determine the force reduction level remains uncertain. OBJECTIVE: The objective of the study was to determine, by a finite element analysis (FEA), the force reduction needed to avoid root resorption and maintain the efficiency of orthodontic mechanics of periodontally compromised teeth similar to the sound one. METHODS: An anatomical model was constructed representing a premolar inserted into a maxillary bone. Based on the initial model (R0), three bone height loss conditions were simulated (R2 = 2 mm, R4 = 4 mm, and R6 = 6 mm). Two intrusive movements were simulated: pure intrusion (bilateral mini implant) and uncontrolled-tipping intrusion (buccal mini implant). The hydrostatic stress at the periodontal ligament was used to evaluate the risk of root resorption due to over-compression. RESULTS: For bilateral mini implant intrusion, the force had to be decreased by 16%, 32% and 48% for R2, R4 and R6, respectively. For buccal mini implant intrusion, the required reductions were higher (20%, 36% and 56%). A linear relationship between the intrusive force reduction and the alveolar bone height loss was observed in both intrusion mechanics. CONCLUSIONS: According to the FE results, 8% or 9.3% of force reduction for each millimetre of bone height loss is suggested for intrusion with bilateral or buccal mini implant, respectively. The buccal mini implant anchorage must be associated with a supplemental strategy to avoid buccal crown tipping.

Pharyngeal airway changes five years after bimaxillary surgery - A retrospective study.

The aim of this study was to retrospectively evaluate pharyngeal airway (PA) changes after bimaxillary surgery (BMS). Preoperative, immediate- and 5-year postoperative cone-beam computed tomography images of subjects who underwent BMS were assessed. The primary outcome variable was the PA volume. The secondary outcome variables were the retropalatal and oropharyngeal volumes, cross-sectional area, minimal hydraulic diameter, soft tissue, skeletal movements and sleep-disordered breathing (SDB). A total of 50 patients were included, 33 female and 17 male, with a mean age of 26.5 years. A significant increase in the PA volume was seen immediately after surgery (40%), and this increase was still present at 5-year follow-up (34%) (P < 0.001). A linear mixed model regression analysis revealed that a mandibular advancement of ≥5 mm (P = 0.025) and every 1-mm upward movement of epiglottis (P = 0.016) was associated with a volume increase of the oropharyngeal compartment. Moreover, ≥5-mm upward movement of hyoid bone (P = 0.034) and every 1-mm increase in minimal hydraulic diameter (P < 0.001) correlated with an increase of the PA volume. A total of 30 subjects reported improvement in the SDB at 5-year follow-up. This study demonstrated that BMS led to an increase in PA dimensions in non-OSA patients, and these changes were still present at 5-year follow-up. BMS seemed to induce clinical improvement in SDB.

Operating time for wire ligation with self-ligating and conventional brackets: A standardized in vitro study.

OBJECTIVE: Operating time is one of the main advantages attributed from the literature to the use of self-ligating brackets (SLB). The aim of this study is to investigate the time needed for a complete archwire change procedure with conventional brackets (CB) and SLBs in a standardized in vitro research setting, comparing operators with different expertise. MATERIALS AND METHODS: Thirty-three participants were divided into three equal groups: undergraduate students, postgraduate students, and orthodontists. Three sets of typodonts bonded with three types of brackets, including passive SLBs, active SLBs, and CBs using both steel and elastic ligatures were investigated. Operators had to insert, ligate, deligate, and remove wires in sets of typodonts representing an actual dentition before and after orthodontic treatment, mounted in phantoms. Archwire change procedure times were compared between the different bracket/ligation systems, between the before- and after-treatment typodonts, and between operators. RESULTS: There were significant differences between SLBs and CBs, the greatest difference being 11 min 16 s between passive SLBs and CBs ligated with metallic ligatures at T0, for the total archwire change procedure by the operators overall. For all the operators, there was a statistically significant difference in total archwire change procedure time between the systems. The undergraduate students were the slowest when using CBs, but they showed no significant difference compared to the other users when using SLBs. CONCLUSION: SLBs can offer a significant operating time reduction compared to CBs, and time saving is not dependent on the operator's experience and training.

Indirect vs direct bonding of mandibular fixed retainers in orthodontic patients: Comparison of retainer failures and posttreatment stability. A 5-year follow-up of a single-center randomized controlled trial.

INTRODUCTION: This 2-arm parallel trial aimed to assess the number of failures of mandibular fixed retainers bonded with direct and indirect bonding methods at a 5-year follow-up and investigate the stability of intercanine and interpremolar distances. METHODS: Consecutive patients from the clinic of the University of Geneva (Switzerland) were randomly allocated to either direct or indirect bonding of a mandibular fixed retainer at the end of orthodontic treatment. Inclusion criteria included the presence of all mandibular incisors and canines; and the absence of active caries, restorations, fractures, or periodontal disease of these teeth. The patients were randomized in blocks of 4 using an online randomization service, with allocation concealment secured by contacting the sequence generator for assignment. Two and 5 years (T5) after bonding the retainers, the patients were recalled, and impressions were taken. The primary outcome was the 5-year survival of the mandibular fixed retainer bonded with both bonding methods. The secondary outcomes were the intercanine and interpremolar distances and the assessment of unexpected posttreatment changes (ie, changes in torque and/or rotations of the mandibular incisors and canines). Blinding was applicable for outcome assessment only. Kaplan-Meier curves were generated, and a Cox proportional hazard regression model was fitted for bonding type, age, and treatment. Linear mixed models were fitted to intercanine and interpremolar distances: bonding type, time, age, and treatment were modeled as outcomes. RESULTS: Sixty-four patients were randomized in a 1:1 ratio. At T5, 6 patients without previous failure were lost to follow-up from each group. At T5, the fixed retainer was debonded in 14 patients (54%) for each group. The hazard ratio of indirect bonding to direct bonding was 1.09 (95% confidence interval, 0.26-4.60; P = 0.91); there was no statistically significant difference in survival between the groups. Regarding intercanine and interpremolar distances, none of the tested prognostic factors reached statistical significance. Unexpected posttreatment changes were observed in 6 failure-free patients, all bonded with the direct bonding method. Only 1 patient required debonding of the fixed retainer. No other serious harms were observed. CONCLUSIONS: The 5-year survival rate for both direct and indirect bonding methods was 46%, without a statistically significant difference between bonding methods. Bonded retainers were effective in maintaining intercanine and interpremolar distances. Unexpected posttreatment changes were only observed with retainers bonded with the direct bonding method. REGISTRATION: The trial was not registered. PROTOCOL: The protocol was not published before trial commencement. FUNDING: No funding or conflict of interest to be declared.

In Vitro Comparison of Different Invisalign® and 3Shape® Attachment Shapes to Control Premolar Rotation.

Aim: To evaluate in vitro the differences of various Invisalign® attachments in their effectiveness during derotation of an upper second premolar in terms of forces and moments created and compare them to the 3Shape® box attachment as well as to no attachment at all. Materials and Methods: A Force System Identification (FSI) machine, comprising two load sensors, was used in this study. Sensor 1 was connected to the test tooth (i.e. upper second premolar) carrying a different attachment design, and the fixed sensor (Sensor 2) was connected to the base model. Once the corresponding aligner was passively seated on the teeth, 12 different setups (i.e. 11 different attachments and one setup with no attachment at all) were tested by rotating the test tooth 4.5° mesially and 4.5° distally, in increments of 0.45°. Results: The vertical rectangular attachments were able to generate the highest derotational moment on both mesial and distal rotations but also received the most side effects (intrusive force, torque, and tipping). The no-attachment setup performed least favorably in terms of derotational ability but exhibited the least side effects. In the y-axis, all attachments received a buccal root torque with a lingual force during disto-rotation and a lingual root torque with a buccal force during mesio-rotation. Conclusion: Attachments are necessary for derotating an upper second premolar. An aligner incremental change of more than 1° derotation can generate high moments. The vertical rectangular attachments perform best in derotations; however, they exhibit the most side effects. Finally, despite presenting the least side effects, derotation of a premolar with no attachment is not as efficient.

Restricted upper airway dimensions in patients with dentofacial deformity from juvenile idiopathic arthritis.

BACKGROUND: This retrospective, cross-sectional study aimed to assess the pharyngeal airway dimensions of patients with juvenile idiopathic arthritis (JIA) and moderate/severe JIA-related dentofacial deformity (mandibular retrognathia/micrognathia), and compare the results with JIA patients with a normal mandibular appearance and a group of non-JIA patients. METHODS: Seventy-eight patients were retrospectively included in a 1:1:1 manner as specified below. All patients had previously been treated at the Section of Orthodontics, Aarhus University, Denmark. All had a pretreatment cone beam computed tomography (CBCT). Group 1 (JIA+); 26 JIA patients with severe arthritis-related dentofacial deformity and mandibular retrognathia/micrognathia. Group 2 (JIA-); 26 JIA patients with normal mandibular morphology/position. Group 3 (Controls); 26 non-JIA subjects. Dentofacial morphology and upper airway dimensions, excluding the nasal cavity, were assessed in a validated three-dimensional (3D) fashion. Assessment of dentofacial deformity comprised six morphometric measures. Assessment of airway dimensions comprised nine measures. RESULTS: Five morphometric measures of dentofacial deformity were significantly deviating in the JIA+ group compared with the JIA- and control groups: Posterior mandibular height, anterior facial height, mandibular inclination, mandibular occlusal inclination, and mandibular sagittal position. Five of the airway measurements showed significant inter-group differences: JIA+ had a significantly smaller nasopharyngeal airway dimension (ad2-PNS), a smaller velopharyngeal volume, a smaller minimal cross-sectional area and a smaller minimal hydraulic diameter than JIA- and controls. No significant differences in upper airway dimensions were seen between JIA- and controls. CONCLUSION: JIA patients with severe arthritis-related dentofacial deformity and mandibular micrognathia had significantly restricted upper airway dimensions compared with JIA patients without dentofacial deformity and controls. The restrictions of upper airway dimension seen in the JIA+ group herein were previously associated with sleep-disordered breathing in the non-JIA background population. Further studies are needed to elucidate the role of dentofacial deformity and restricted airways in the development of sleep-disordered breathing in JIA.

Translation and cross-cultural adaptation of the sleep-related breathing disorder scale of the Pediatric Sleep Questionnaire into Danish language.

OBJECTIVE/BACKGROUND: Sleep-disordered breathing (SDB) is common but often underestimated in children. The gold standard for assessing SDB is polysomnography, but it is expensive and time-consuming. The Paediatric Sleep Questionnaire (PSQ/SRDB) is a validated screening tool for SDB, which represents an efficient and alternative tool for screening SDB among children. However, a translated and validated Danish version of the PSQ/SRDB is not available yet. Our aim was to cross-culturally translate the PSQ/SRDB into Danish language for use in clinical and research settings. PATIENTS/METHODS: The translation was carried out through forward-backward translation techniques performed by a panel of experts, and the cross-cultural adaptation was achieved by pretesting of the pre-final version. Internal consistency of the Danish PSQ/SRDB version was measured by Cronbach's alpha coefficients, while Cohen's kappa was used to evaluate test-retest reliability. Construct validity was assessed by factor analysis of the principal components. RESULTS: The Danish PSQ/SRDB was administered to the caregivers of 348 children. An overall Cronbach's alpha of 0.72 was found, confirming the survey's consistency, with the results for the domains ranging 0.52-0.70. The Danish PSQ/SRDB showed moderate to perfect reliability for all items, except for one question (C14). Factor analysis performed on the Danish PSQ/SRDB showed that the predetermined four factors were similar with the original version of the PSQ/SRDB. CONCLUSIONS: The Danish version of the PSQ/SRDB has been successfully translated and cross-culturally adapted, suggesting that it can be used as an appropriate paediatric screening tool for SDB in Denmark.