ABSTRACT
Hexachlorocyclohexanes (HCH) isomers and their transformation products, such as chlorobenzenes (ClB), generate severe and persistent environmental problems at many sites worldwide. The Wetland technology employing oxidation-reduction, biosorption, biodegradation and phytoremediation methods can sufficiently treat HCH-contaminated water. The treatment process is inherently natural and requires no supplementary chemicals or energy. The prototype with a capacity of 3 L/s was installed at Hajek quarry spoil heap (CZ), to optimize the technology on a full scale. The system is fed by drainage water with an average concentration of HCH 129 µg/L, ClB 640 µg/L and chlorophenols (ClPh) of 16 µg/L. The system was tested in two years of operation, regularly monitored for HCH, ClB and ClPh, and maintained to improve its efficiency. The assessment was not only for environmental effects but also for socio and economic indicators. During the operation, the removal efficiency of HCH ranged from 53.5 % to 96.9 % (83.9 % on average) depending on the flow rate. Removal efficiency was not uniform for individual HCH isomers but exhibited the trend: α = γ = δ > ß = ε. The improved water quality was reflected in a biodiversity increase expressed by a number of phytobenthos (diatoms) species, a common biomarker of aquatic environment quality. The Wetland outranked the conventional WWTP in 10 out of the 15 general categories, and it is the most relevant scenario from the socio, environmental, and economic aspects.
Subject(s)
Hexachlorocyclohexane , Water Pollutants, Chemical , Wetlands , Water Pollutants, Chemical/analysis , Hexachlorocyclohexane/analysis , Waste Disposal, Fluid/methods , Biodegradation, Environmental , Water Purification/methodsABSTRACT
Hexachlorocyclohexanes (HCH) belong to the banned pesticides with short-time production and use during the last century. However, the consequences of this short period are still present as persistent environmental contamination. This study represents the large lab-scale experiment focused on the HCH accumulation and metabolism in selected wetland plants (Juncus effuses, Typha latifolia, Phragmites australis) and trees (Alnus glutinosa) after the exposure to the technical mix of HCH isomers (t-HCH) or δ-HCH at three different concentration. During the three-month exposure, morphological (biomass, height, relative chlorophyll content) and physiological (photosynthetic measurements - photosynthetic rate, stomatal conductance, transpiration and dark transpiration) parameters were measured to assess the HCH effect on plant's growth. The results showed that all selected plant species supported HCH removal from the soil. The total removal efficiency was lower for the t-HCH than for δ-HCH exposure, and the best results were provided by Alnus glutinosa tree. Also, no isomer preference was observed in plants exposed to t-HCH. Most HCH remained accumulated in the root biomass, and mainly α-HCH and δ-HCH were transported to the above-ground parts due to their physicochemical properties. Simultaneously, HCH uptake and metabolization to chlorobenzenes (CB) and chlorophenols (CP) occur. Non-targeted analysis showed that CP could be conjugated to glucose and malonyl in plant tissue, and secondary plant metabolism is affected positively and negatively after exposure to t-HCH depending on plant species and chemical concentration. Luteolin, quercetin and quercetin-3-O-glucoside found common to all species showed quantitative changes due to HCH. Nevertheless, most morphological and physiological parameters were adversely affected without statistical significance. This large-scale study provides information on the fate of HCH in the soil-plant system, the suitability of selected plants and their adaptation to chemical stress for use in the phytoremediation process.
Subject(s)
Hexachlorocyclohexane , Wetlands , Hexachlorocyclohexane/analysis , Bioaccumulation , Biodegradation, Environmental , Plants/metabolism , SoilABSTRACT
Although the pesticide hexachlorocyclohexane (HCH) and its isomers have long been banned, their presence in the environment is still reported worldwide. In this study, we investigated the bioaccumulation potential of α, ß, and δ hexachlorocyclohexane (HCH) isomers in black alder saplings (Alnus glutinosa) to assess their environmental impact. Each isomer, at a concentration of 50 mg/kg, was individually mixed with soil, and triplicate setups, including a control without HCH, were monitored for three months with access to water. Gas chromatography-mass spectrometry revealed the highest concentrations of HCH isomers in roots, decreasing towards branches and leaves, with δ-HCH exhibiting the highest uptake (roots-14.7 µg/g, trunk-7.2 µg/g, branches-1.53 µg/g, leaves-1.88 µg/g). Interestingly, α-HCH was detected in high concentrations in ß-HCH polluted soil. Phytohormone analysis indicated altered cytokinin, jasmonate, abscisate, and gibberellin levels in A. glutinosa in response to HCH contamination. In addition, amplicon 16S rRNA sequencing was used to study the rhizosphere and soil microbial community. While rhizosphere microbial populations were generally similar in all HCH isomer samples, Pseudomonas spp. decreased across all HCH-amended samples, and Tomentella dominated in ß-HCH and control rhizosphere samples but was lowest in δ-HCH samples.
Subject(s)
Alnus , Soil Pollutants , Hexachlorocyclohexane/analysis , Biodegradation, Environmental , RNA, Ribosomal, 16S/genetics , Soil Pollutants/analysis , SoilABSTRACT
The hexachlorocyclohexane isomers (HCH) are long-banned pesticides. Even though their use has been prohibited for decades, their presence in the environment is still reported worldwide. Wetland + is a registered trademark of the remedial treatment technology consisting of an aerobic sedimentary tank, a permeable reactive barrier, a biosorption system, and an aerobic wetland. This proven method combines a reductive treatment known from PRBs with the natural wetland self-cleaning processes. The average efficiency of the system is 96.8% for chlorobenzenes (ClB) and 81.7% for HCH, during the first 12 months of the system operation. The presence of the genes encoding enzymes involved in the degradation of the HCH compounds indicates that the removal of HCH and ClB occurs not only by chemical removal but also through aerobic and anaerobic combining biodegradation. Changes in abundance and the composition of the diatom community were found to be suitable indicators of the water quality and of the impact of the Wetland + operation on the water ecosystem. The system's annual operation exhibited a markedly higher number of diatom species in the closing profiles of the Ostrovský Creek, the Wetland + effluent recipient.
Subject(s)
Ecosystem , Hexachlorocyclohexane , Hexachlorocyclohexane/chemistry , Hexachlorocyclohexane/metabolism , Wetlands , Biodegradation, Environmental , BiodiversityABSTRACT
Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFMs). The study involved the use of pristine and polydopamine (Pdopa) coated PTFE HFMs, both with and without the presence of an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and (bio)fouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin in dead-end filtration as well as dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli, respectively. The filtration recovery ratio and antimicrobial results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.
Subject(s)
Zinc Oxide , Spectroscopy, Fourier Transform Infrared , Dopamine , Escherichia coli , PolytetrafluoroethyleneABSTRACT
Sulfate radical-based advanced oxidation processes (SR-AOPs) are gaining popularity as a feasible alternative for removing recalcitrant pollutants in an aqueous environment. Persulfates, namely peroxydisulfate (PDS) and peroxymonosulfate (PMS) are the most common sulfate radical donors. Persulfates activation by ultraviolet (UV) irradiation is considered feasible due to the high concentration of radicals produced as well as the lack of catalysts leaching. The research focuses on determining the impact of activated PDS and PMS on the degradation of anthraquinone dye, i.e., Acid Blue 129 (AB129). UV-activated PDS and PMS can quickly degrade the AB129 as well as restrict the formation of by-products. This could explain the reduced ecotoxicity levels of the treated water after degradation, using an aquatic plant (Lemna minor) and a crustacean (Daphnia magna). This, on the other hand, can ensure that the sulfate radical-based processes can be an environmentally friendly technology.
Subject(s)
Water Pollutants, Chemical , Water Purification , Kinetics , Water Pollutants, Chemical/analysis , Oxidation-Reduction , AnthraquinonesABSTRACT
Decades of antibiotic use and misuse have generated selective pressure toward the rise of antibiotic-resistant bacteria, which now contaminate our environment and pose a major threat to humanity. According to the evolutionary "Red queen theory", developing new antimicrobial technologies is both urgent and mandatory. While new antibiotics and antibacterial technologies have been developed, most fail to penetrate the biofilm that protects bacteria against external antimicrobial attacks. Hence, new antimicrobial formulations should combine toxicity for bacteria, biofilm permeation ability, biofilm deterioration capability, and tolerability by the organism without renouncing compatibility with a sustainable, low-cost, and scalable production route as well as an acceptable ecological impact after the ineluctable release of the antibacterial compound in the environment. Here, we report on the use of silver nanoparticles (NPs) doped with magnetic elements (Co and Fe) that allow standard silver antibacterial agents to perforate bacterial biofilms through magnetophoretic migration upon the application of an external magnetic field. The method has been proved to be effective in opening micrometric channels and reducing the thicknesses of models of biofilms containing bacteria such as Enterococcus faecalis, Enterobacter cloacae, and Bacillus subtilis. Besides, the NPs increase the membrane lipid peroxidation biomarkers through the formation of reactive oxygen species in E. faecalis, E. cloacae, B. subtilis, and Pseudomonas putida colonies. The NPs are produced using a one-step, scalable, and environmentally low-cost procedure based on laser ablation in a liquid, allowing easy transfer to real-world applications. The antibacterial effectiveness of these magnetic silver NPs may be further optimized by engineering the external magnetic fields and surface conjugation with specific functionalities for biofilm disruption or bactericidal effectiveness.
Subject(s)
Anti-Infective Agents , Metal Nanoparticles , Silver/pharmacology , Biofilms , Anti-Bacterial Agents/pharmacology , Enterococcus faecalis , Magnetic Phenomena , Microbial Sensitivity TestsABSTRACT
Water could be considered one of the essential natural resources on our planet. However, water contamination has become virtually ubiquitous during the past decades due to several factors, e.g., world population growth, water use in chemical production, and agriculture. Among contaminants, persistent organic pollutants (POPs) were widely spread during the last few decades and are now present all around the world. POPs are connected with several different illnesses, and therefore the removal of these pollutants from water is a challenge for coming years. Cyclodextrins (CDs) are environmentally friendly and cheap pollutant adsorbents due to their peculiar physicochemical properties. Moreover, CDs are relatively easy to use, and many techniques are reported for their functionalization. In addition, several CD derivatives are known and some of them are commercially available. CDs and CD-functionalized materials could be used for removal of different pollutants by using various methods, e.g., adsorption/extraction, soil washing, and electrokinetic/catalytic processes. This is the first review article that provides an overview of CDs/CD-based materials and their use in the remediation of POPs listed under the Stockholm Convention. The mechanisms of the POPs removal by CDs are also discussed.
Subject(s)
Cyclodextrins , Environmental Pollutants , Persistent Organic Pollutants , Cyclodextrins/chemistry , Adsorption , WaterABSTRACT
The accumulation of organic contaminants including dyes in aquatic systems is of significant environmental concern, necessitating the development of affordable and sustainable materials for the treatment/elimination of these hazardous pollutants. Here, a green synthesis strategy has been used to develop a self-assembled gum kondagogu-sodium alginate bioconjugate sponge adorned with silver nanoparticles, for the first time. The properties of the nanocomposite sponge were then analyzed using FTIR, TGA, SEM, and MicroCT. The ensued biobased sponge exhibited hierarchical microstructure, open cellular pores, good shape memory, and mechanical properties. It merges the attributes of an open cellular porous structure with metal nanoparticles and are envisaged to be deployed as a sustainable catalytic system for reducing contaminants in the aqueous environment. This nanocomposite sponge showed enhanced catalytic effectiveness (km values up to 37 min-1 g-1 and 44 min-1 g-1 for methylene blue and 4-nitrophenol, respectively), antibacterial properties, reusability, and biodegradability (65% biodegradation in 28 days).
ABSTRACT
Nanoscale zero-valent iron (nZVI) has increasingly been applied to remediate aquifers polluted by organochlorines or heavy metals. As a result, bacteria in the vicinity of remediate action can be stressed by surplus iron released from nZVI. However, the understanding of the iron stress defense pathways during this process is currently incomplete. Therefore, we aimed to elucidate the physiological and transcriptomic response of the bacterium, Pseudomonas putida NCTC 10936, to 100 mg/L of nZVI and 44.5 µg/L of dissolved iron obtained from nZVI suspension. Cell viability was neither affected by nZVI nor dissolved iron, although the dissolved iron caused stress that altered the cell physiology and caused the generation of smaller cells, whereas cells were elongated in the presence of nZVI. Transcriptomic analysis confirmed the observed stronger physiological effect caused by dissolved iron (in total 3839 differentially expressed genes [DEGs]) than by nZVI (945 DEGs). Dissolved iron (but not nZVI) activated genes involved in oxidative stress-related pathways, antioxidant activity, carbohydrate and energy metabolism, but downregulated genes associated with flagellar assembly proteins and two-component systems involved in sensing external stimuli. As a result, bacteria very effectively faced oxidative insults and cell viability was not affected.
Subject(s)
Metals, Heavy , Pseudomonas putida , Iron , Oxidation-Reduction , Oxidative Stress , Pseudomonas putida/geneticsABSTRACT
Green bionanocomposites have garnered considerable attention and applications in the pharmaceutical and packaging industries because of their intrinsic features, such as biocompatibility and biodegradability. The work presents a novel approach towards the combined effect of glycerol, tween 80 and silver nanoparticles (AgNPs) on the physicochemical properties of lyophilized chitosan (CH) scaffolds produced via a green synthesis method.The produced bionanocomposites were characterized with the help of Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). The swelling behavior, water vapor transmission rate, moisture retention capability, degradation in Hanks solution, biodegradability in soil, mechanical strength and electrochemical performance of the composites were evaluated. The addition of additives to the CH matrix alters the physicochemical and biological functioning of the matrix. Plasticized scaffolds showed an increase in swelling degree, water vapor transmission rate and degradability in Hank's balanced solution compared to the blank chitosan scaffolds. The addition of tween 80 made the scaffolds more porous, and changes in physicochemical properties were observed. Green-synthesized AgNPs showed intensified antioxidant and antibacterial properties. Incorporating biogenic nanoparticles into the CH matrix enhances the polymer composites' biochemical properties and increases the demand in the medical and biological sectors. These freeze-dried chitosan-AgNPs composite scaffolds had tremendous applications, especially in biomedical fields like wound dressing, tissue engineering, bone regeneration, etc.
ABSTRACT
Rising concern about emerging and already persisting pollutants in water has urged the scientific community to develop novel remedial techniques. A new group of remediation methods is based on the modification of nanoscale zero-valent iron particles (nZVI), which are well known for treating volatile organic compounds and heavy metals. The properties of nZVI may be further enhanced by modifying their structure or surface using "green" polymers. Herein, nZVI was modified by a ß-cyclodextrin polymer (ß-CDP), which is considered an environmentally safe and inexpensive adsorbent of contaminants. This composite was used for the first time for the degradation of sulfamethoxazole (SMX). Coating by ß-CDP not only enhanced the degradation of SMX (>95%, under 10 min) by the nanoparticles in a wide pH range (3-9) and enabled their efficient reusability (for three cycles) but also made the coated nZVI less toxic to the model bioindicator microalga Raphidocelis subcapitata. Moreover, degradation products of SMX were found to be less toxic to Escherichia coli bacteria and R. subcapitata microalga, contrary to the SMX antibiotic itself, indicating a simple and eco-friendly cleaning process. This research aims to further stimulate and develop novel remedial techniques based on nZVI, and provides a potential application in the degradation of antibiotics in a wide pH range. Moreover, the wealth of available cyclodextrin materials used for surface modification may open a way to discover more efficient and attractive composites for environmental applications.
Subject(s)
Cyclodextrins , Metals, Heavy , Water Pollutants, Chemical , Cellulose , Iron/chemistry , Sulfamethoxazole/toxicity , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/toxicityABSTRACT
A facile green synthetic method is proposed for the synthesis of zinc oxide nanoparticles (ZnO NPs) using the bio-template Cinnamomum tamala (C. tamala) leaves extract. The morphological, functional, and structural characterization of synthesized ZnO NPs were studied by adopting different techniques such as energy dispersive X-ray analysis (EDX), high-resolution transmission electron microscopy (HR-TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Visible spectroscopy, fourier transform infrared (FTIR) spectroscopy, raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The fabricated ZnO NPs exhibit an average size of 35 nm, with a hexagonal nanostructure. Further, the well-characterized ZnO NPs were employed for the photocatalytic degradation of methylene blue (MB) in an aqueous solution. The photocatalytic activity was analyzed by changing the various physicochemical factors such as reaction time, amount of photocatalyst, precursor concentration, and calcination temperature of the ZnO NPs. All the studies suggest that the ZnO synthesized through the green protocol exhibits excellent photocatalytic potency against the dye molecules.
ABSTRACT
Traditionally, the synthesis of nanomaterials in the ultra-small size regime (1-3 nm diameter) has been linked with the employment of excessive amounts of hazardous chemicals, inevitably leading to significant environmentally detrimental effects. In the current work, we demonstrate the potential of laser fragmentation in liquids (LFL) to produce highly pure and stable iron ultra-small nanoparticles. This is carried out by reducing the size of carbonyl iron microparticles dispersed in various polar solvents (water, ethanol, ethylene glycol, polyethylene glycol 400) and liquid nitrogen. The explored method enables the fabrication of ligand-free iron oxide ultra-small nanoparticles with diameter in the 1-3 nm range, a tight size distribution, and excellent hydrodynamic stability (zeta potential > 50 mV). The generated particles can be found in different forms, including separated ultra-small NPs, ultra-small NPs forming agglomerates, and ultra-small NPs together with zero-valent iron, iron carbide, or iron oxide NPs embedded in matrices, depending on the employed solvent and their dipolar moment. The LFL technique, aside from avoiding chemical waste generation, does not require any additional chemical agent, other than the precursor microparticles immersed in the corresponding solvent. In contrast to their widely exploited chemically synthesized counterparts, the lack of additives and chemical residuals may be of fundamental interest in sectors requiring colloidal stability and the largest possible number of chemically active sites, making the presented pathway a promising alternative for the clean design of new-generation nanomaterials.
ABSTRACT
The effect of the zeta potential of nano zero-valent iron (nZVI) and carbocatalyst on the activation of persulfate was investigated. The oxidation experiments were performed on three different compounds, with variously modified nZVI and three distinct carbocatalysts. From the obtained results, an evident linear correlation between nanoparticles' zeta potential and reaction rate constants of these three compounds oxidation may be observed. This phenomenon is not mechanism-specific and occurs for the radical and non-radical processes. The present work indicates the critical influence of the surface charge of nZVI and carbocatalysts on the persulfate catalytic activation.
ABSTRACT
The food packaging industry explores economically viable, environmentally benign, and non-toxic packaging materials. Biopolymers, including chitosan (CH) and gelatin (GE), are considered a leading replacement for plastic packaging materials, with preferred packaging functionality and biodegradability. CH, GE, and different proportions of silver nanoparticles (AgNPs) are used to prepare novel packaging materials using a simple solution casting method. The functional and morphological characterization of the prepared films was carried out by using Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, and scanning electron microscopy (SEM). The mechanical strength, solubility, water vapor transmission rate, swelling behavior, moisture retention capability, and biodegradability of composite films were evaluated. The addition of AgNPs to the polymer blend matrix improves the physicochemical and biological functioning of the matrix. Due to the cross-linking motion of AgNPs, it is found that the swelling degree, moisture retention capability, and water vapor transmission rate slightly decrease. The tensile strength of pure CH-GE films was 24.4 ± 0.03, and it increased to 25.8 ± 0.05 MPa upon the addition of 0.0075% of AgNPs. The real-time application of the films was tested by evaluating the shelf-life existence of carrot pieces covered with the composite films. The composite film containing AgNPs becomes effective in lowering bacterial contamination while comparing the plastic polyethylene films. In principle, the synthesized composite films possessed all the ideal characteristics of packaging material and were considered biodegradable and biocompatible food packaging material and an alternate option for petroleum-based plastics.
ABSTRACT
Tree gums are a class of abundantly available carbohydrate polymers that have not been explored thoroughly in film fabrication for food packaging. Films obtained from pristine tree gums are often brittle, hygroscopic, and lack mechanical strength. This study focuses on the chemical modification of gum kondagogu using long-chain alkenyl groups of dodecenyl succinic anhydride (DDSA), an esterifying agent that introduces a 12-carbon hydrophobic chain to the kondagogu structure. The esterification reaction was confirmed by 1H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. The effect of nano-cellulose as an additive on various film properties was investigated. The developed films were characterized for their mechanical, morphological, optical, barrier, antibacterial, and biodegradable properties. The inclusion of long-chain carbon groups acted as internal plasticizers and resulted in an amorphous structure with better film-forming ability, improved hydrophobicity, and higher elongation at break values. The modified films exhibited antibacterial properties and excellent biodegradability under aerobic conditions.
Subject(s)
Alkenes/pharmacology , Bixaceae/chemistry , Food Packaging , Plant Gums/pharmacology , Succinic Anhydrides/chemistry , Alkenes/chemical synthesis , Alkenes/chemistry , Anti-Bacterial Agents/chemical synthesis , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Biodegradable Plastics/chemical synthesis , Biodegradable Plastics/chemistry , Biodegradable Plastics/pharmacology , Elastic Modulus , Escherichia coli/drug effects , Hydrophobic and Hydrophilic Interactions , Materials Testing , Plant Gums/chemical synthesis , Plant Gums/chemistry , Staphylococcus aureus/drug effects , Tensile StrengthABSTRACT
The assembly of bio-based macromolecules of gum kondagogu/sodium alginate (KO/SA) was fabricated using glycerol as a plasticiser and their optimum blending ratio was identified based on their physical and chemical, structural, mechanical, barrier, and morphological properties. The attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) analysis show that both biomacromolecules are well organised due to the hydrogen bond interaction between molecular chains involving the hydroxyl, carbonyl, and acetyl groups. Structural identification was performed by recording X-ray diffraction (XRD) spectra. Field emission scanning electron microscopy (FESEM) was used to identify the distinction between the surface of the films of biopolymers, and their conjugates, where the addition of SA increased the surface homogeneity and smoothness. The water contact angle of the blend films reached up to 81°, although the value for pure biomacromolecule films was very low. The blend films also exhibited high tensile strength (up to 24 MPa) compared to the pure biopolymer films. Investigation of film-forming ability, mechanical strength, permeability, transparency, and biodegradability of the developed KO/SA bio-macromolecular association may be established as green and sustainable food packaging films.
Subject(s)
Alginates/chemistry , Bixaceae/chemistry , Food Packaging , Membranes, Artificial , Plant Gums/chemistryABSTRACT
This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.
Subject(s)
Biocompatible Materials/chemistry , Nanofibers/chemistry , Nanotechnology/methods , Tissue Engineering/methods , Agar/chemistry , Alginates/chemistry , Animals , Carrageenan/chemistry , Cellulose/chemistry , Chitin/chemistry , Chitosan/chemistry , Dextrans/chemistry , Electrochemical Techniques , Glucans/chemistry , Heparin/chemistry , Humans , Hyaluronic Acid/chemistry , Nanofibers/ultrastructure , Pectins/chemistry , Starch/chemistryABSTRACT
A novel, lightweight (8 mg/cm3), conjugate sponge of karaya gum (Kg) and chitosan (Ch) has been synthesized with very high porosity (~98%) and chemical stability, as a pH-responsive adsorbent material for the removal of anionic and cationic dyes from aqueous solutions. Experimental results showed that Kg-Ch conjugate sponge has good adsorption capacity for anionic dye methyl orange (MO: 32.81 mg/g) and cationic dye methylene blue (MB: 32.62 mg/g). The optimized Kg:Ch composition grants access to the free and pH-dependent ionizable functional groups on the surface of the sponge for the adsorption of dyes. The studies on the adsorption process as a function of pH, adsorbate concentration, adsorbent dose, and contact time indicated that the adsorption capacity of MB was decreased with increasing pH from 5 to 10 and external mass transfer together with intra-particle diffusion. The adsorption isotherm of the anionic dye MO was found to correlate with the Langmuir model (R2 = 0.99) while the adsorption of the cationic MB onto the sponge was better described by the Freundlich model (R2 = 0.99). Kinetic regression results specified that the adsorption kinetics were well represented by the pseudo-second-order model. The H-bonding, as well as electrostatic interaction between the polymers and the adsorption interactions of dyes onto Kg-Ch sponge from aqueous solutions, were investigated using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, and the highly wrinkled porous morphology was visualized in depth by field-emission scanning electron microscopy (FE-SEM) analysis. Moreover, the samples could be reused without loss of contaminant removal capacity over six successive adsorption-desorption cycles. The hierarchical three-dimensional sponge-like structure of Kg has not been reported yet and this novel Kg-Ch sponge functions as a promising candidate for the uninterrupted application of organic pollutant removal from water.