Osmotically Delaminated Silicate Nanosheet-Coated NCM for Ultra-Stable Li+ Storage and Chemical Stability Toward Long-Term Air Exposure.

To ensure the safety and performance of lithium-ion batteries (LIBs), a rational design and optimization of suitable cathode materials are crucial. Lithium nickel cobalt manganese oxides (NCM) represent one of the most popular cathode materials for commercial LIBs. However, they are limited by several critical issues, such as transition metal dissolution, formation of an unstable cathode-electrolyte interphase (CEI) layer, chemical instability upon air exposure, and mechanical instability. In this work, coating fabricated by self-assembly of osmotically delaminated sodium fluorohectorite (Hec) nanosheets onto NCM (Hec-NCM) in a simple and technically benign aqueous wet-coating process is reported first. Complete wrapping of NCM by high aspect ratio (>10 000) nanosheets is enabled through an electrostatic attraction between Hec nanosheets and NCM as well as by the superior mechanical flexibility of Hec nanosheets. The coating significantly suppresses mechanical degradation while forming a multi-functional CEI layer. Consequently, Hec-NCM delivers outstanding capacity retention for 300 cycles. Furthermore, due to the exceptional gas barrier properties of the few-layer Hec-coating, the electrochemical performance of Hec-NCM is maintained even after 6 months of exposure to the ambient atmosphere. These findings suggest a new direction of significantly improving the long-term stability and activity of cathode materials by creating an artificial CEI layer.

Optimized Pt Single Atom Harvesting on TiO2 Nanotubes-Towards a Most Efficient Photocatalyst.

In the present work the authors show that anodic TiO2 nanotubes (NT) show excellent harvesting properties for Pt single atoms (Pt SAs) from highly dilute Pt solutions. The tube walls of anodic nanotubes, after adequate annealing to anatase, provide ample of suitable trapping sites-that is, surface Ti3+ -Ov (Ov : oxygen vacancy) defects that are highly effective to extract and accumulate Pt in the form of SAs. A saturated (maximized) SA density can be achieved by an overnight immersion of a TiO2 NT layer to a H2 PtCl6 solution with a concentration that is as low as 0.01 mm Pt. Such TiO2 NTs with surface trapped Pt SAs provide a maximized high activity for photocatalytic H2 generation (reaching a turnover frequency (TOF) of 1.24 × 106 h-1 at a density of 1.4 × 105 Pt atoms µm-2 )-a higher loading with Pt nanoparticles does not further increase the photocatalytic activity. Overall, these findings show that anodic TiO2 nanotubes provide a remarkable substrate for Pt extraction and recovery from very dilute solutions that directly results in a highly efficient photocatalyst, fabricated by a simple immersion technique.

As a single atom Pd outperforms Pt as the most active co-catalyst for photocatalytic H2 evolution.

Here, we evaluate three different noble metal co-catalysts (Pd, Pt, and Au) that are present as single atoms (SAs) on the classic benchmark photocatalyst, TiO2. To trap the single atoms on the surface, we introduced controlled surface vacancies (Ti3+-Ov) on anatase TiO2 nanosheets by a thermal reduction treatment. After anchoring identical loadings of single atoms of Pd, Pt, and Au, we measure the photocatalytic H2 generation rate and compare it to the classic nanoparticle co-catalysts on the nanosheets. While nanoparticles yield the well-established the hydrogen evolution reaction activity sequence (Pt > Pd > Au), for the single atom form, Pd radically outperforms Pt and Au. Based on density functional theory (DFT), we ascribe this unusual photocatalytic co-catalyst sequence to the nature of the charge localization on the noble metal SAs embedded in the TiO2 surface.

Self-assembly and activation of a titania-nanotube based photocatalyst for H2 evolution.

Constructing an efficient photocatalyst for H2 production generally requires the integration of several functional features in and on a semiconductor platform. This is conventionally done by a classic step-by-step synthesis. Here, we report the self-assembly of an amorphous titania nanotube based system when illuminated for extended time in suitable aqueous solutions. Over time, not only photodeposition of a co-catalyst can take place, but also in situ crystallization and morphology changes occur that can provide a higher H2 production than observed for a classically assembled photocatalyst.

A long-term stable aqueous aluminum battery electrode based on one-dimensional molybdenum-tantalum oxide nanotube arrays.

Aluminum ion aqueous batteries (AIBs) are among the most promising candidates for high energy density devices due to the multivalent redox processes associated with Al3+ ion intercalation. However, only a few stable AIB electrode materials have been reported so far. MoO3 is a very promising electrode material due to its octahedral layered crystal structure which can accommodate multivalent cation by intercalation. However, the poor electrochemical stability of MoO3 and the sluggish intercalation kinetics of Al3+ ion in Mo oxides electrodes limit its practical application. In this work, we propose a strategy to overcome such shortcomings of MoO3 by fabricating electrodes composed of self-ordered one-dimensional (1D) MoTaOx nanotubes synthesized via electrochemical anodization of Mo-Ta alloy substrates. We show that this approach allows for direct incorporation of Ta in the Mo oxide nanotubes. The resulting MoTaOx nanotubes, composed of octahedral MoO3 and rhombohedral Mo2Ta2O11 phases, exhibit remarkable electrochemical stability and Al-ion storage properties in aqueous electrolytes that are superior to that of pristine Mo oxide or other most efficient electrode materials reported to date. Such MoTaOx nanotube-based electrodes can achieve a specific capacity of 1180 mA h cm-3 (337 mA h g-1, 141 µA h cm-2) at 1.25 A cm-3 (∼0.35 A g-1, 0.15 mA cm-2). More importantly, the capacity retention of such nanotube array electrodes remains above 83% of the initial capacity after 3000 cycles.

Photoelectrochemical performance of facet-controlled TiO2 nanosheets grown hydrothermally on FTO.

Single crystal anatase TiO2 nanosheets (TiO2-NSs) are grown hydrothermally on fluorine-doped tin oxide (FTO). By systematically changing the hydrothermal conditions such as reaction time, initial concentration of Ti precursor, F precursor, and HCl as an additive, a wide variety of TiO2-NSs, with different morphologies and faceting have been synthesized. For the different morphologies and different facet ratios (anatase S 001/S 001+101), the photoelectrochemical response is characterized and compared. We find that for photoanodes in neutral electrolytes, the magnitude of the photocurrent depends strongly on the growth parameters, that is, peak IPCEs can vary from 11.7% to 61%. For a wide range of parameters, the key parameter deciding on the photocurrent is the effective electrochemically active area of the electrode. Only for very high facet ratios >91%, the photoresponse can be strongly influenced by faceting - for samples with a S 001/S 001+101 of 91%, IPCE value of ≈84% is obtained. This work defines not only optimized synthesis conditions for a most effective growth of these single crystalline electrode, but also represents fundamental data for further applications of such electrodes.

TiO2 nanotubes with different spacing, Fe2O3 decoration and their evaluation for Li-ion battery application.

In the present work, we report on the use of organized TiO2 nanotube (NT) layers with a regular intertube spacing for the growth of highly defined α-Fe2O3 nano-needles in the interspace. These α-Fe2O3 decorated TiO2 NTs are then explored for Li-ion battery applications and compared to classic close-packed (CP) NTs that are decorated with various amounts of nanoscale α-Fe2O3. We show that NTs with tube-to-tube spacing allow uniform decoration of individual NTs with regular arrangements of hematite nano-needles. The tube spacing also facilitates the electrolyte penetration as well as yielding better ion diffusion. While bare CP NTs show a higher capacitance of 71 µAh cm-2 compared to bare spaced NTs with a capacitance of 54 µAh cm-2, the hierarchical decoration with secondary metal oxide, α-Fe2O3, remarkably enhances the Li-ion battery performance. Namely, spaced NTs with α-Fe2O3 decoration have an areal capacitance of 477 µAh cm-2, i.e. they have nearly ∼8 times higher capacitance. However, the areal capacitance of CP NTs with α-Fe2O3 decoration saturates at 208 µAh cm-2, i.e. is limited to ∼3 times increase.

Metal-Phosphate Bilayers for Anatase Surface Modification.

Compared to many other metal oxides, anatase TiO2 shows relatively lower reactivity toward carboxylic acid anchor groups. The latter is crucial for applications, for example, in dye-sensitized solar cells (DSSCs), where the most used dyes bind to the metal oxide surface through carboxylic acid terminations. To improve the surface reactivity, metal-phosphate bilayers of Ni or Co were synthesized on anatase TiO2 compact oxide and nanotubes. In both cases, time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) results showed that the bilayers were successfully formed and that the phosphate layer works as an intermediate between TiO2 and the other species. ToF-SIMS depth profiles of modified nanotubes showed that Ni and Co are present through the whole tube length and reduce in content after heat treatment, in agreement with XPS results. Phosphate groups, on the other hand, are more present in the tubes' depth, and their content on the surface is reduced upon exposure to temperature. The reactivity of the modified surfaces toward carboxylic acid-terminated molecules, as stearic acid and Ru-based N719 dye, was evaluated. Contact angle measurements together with dye desorption experiments demonstrated that the Co-phosphate bilayers heat-treated at 300 °C resulted in the largest enhancement compared to the reference. Bilayer-modified compact anatase TiO2 and anatase TiO2 nanotubes were utilized as photoanodes in DSSCs. An increase in efficiency was observed for all modified electrodes with phosphate-Co treatment, leading to the highest JSC values and an efficiency improvement of 48%.

Double-Side Co-Catalytic Activation of Anodic TiO2 Nanotube Membranes with Sputter-Coated Pt for Photocatalytic H2 Generation from Water/Methanol Mixtures.

Self-standing TiO2 nanotube layers in the form of membranes are fabricated by self-organizing anodization of Ti metal and a potential shock technique. The membranes are then decorated by sputtering different Pt amounts i) only at the top, ii) only at the bottom or iii) at both top and bottom of the tube layers. The Pt-decorated membranes are transferred either in tube top-up or in tube top-down configuration onto FTO slides and are investigated, after crystallization, as photocatalysts for H2 generation using either front or back-side light irradiation. Double-side Pt-decoration of the tube membranes leads to higher H2 generation rates (independently of tube and light-irradiation configuration) compared to membranes decorated at only one side with similar overall Pt amounts. The results suggest that this effect cannot be only ascribed to the overall amount of Pt co-catalyst as such but also to its distribution at both tube extremities. This leads to optimized light absorption and electron diffusion/transfer dynamics: the central part of the membranes acts as light-harvesting zone and electrons therein generated can diffuse towards the Pt/TiO2 active zones (tube extremities) where they can react with the environment and generate H2 .

Free-Standing Membranes to Study the Optical Properties of Anodic TiO2 Nanotube Layers.

In the present work we investigate various optical properties (such as light absorption and reflectance) of anodic TiO2 nanotube layers directly transferred as self-standing membranes onto quartz substrates. This allows investigation in a transmission geometry which provides significantly more reliable data than measurements on the metallic Ti substrate. Light transmission and reflectance measurements were carried out for layers of thickness varying from 1.8 to 50 µm, and the layers were investigated in their amorphous and crystalline forms. A series of wavelength-dependent light attenuation coefficients are extrapolated and found to match the photocurrent versus irradiation wavelength behavior. A feature specific to anodic nanotubes is that their intrinsic carbon contamination content causes a proportional sub-bandgap response. Overall, the extracted data provide a valuable basis and understanding for the design of photo-electrochemical devices based on TiO2 nanotubes.

Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells.

In order to induce greater light absorption, nano-patterning is often applied to the metal-oxide buffer layer in inverted bulk-heterojunction(BHJ) solar cells. However, current homogeneity was significantly disturbed at the interface, leading to an efficiency that was not fully optimized. In this work, an additional PC61BM layer was inserted between the ZnO ripple and the photoactive layer to enhance the electron extraction. The insertion of additional PC61BM layer provided substantial advantages in the operation of inverted BHJ solar cells; specifically, it enhanced current homogeneity and lowered accumulation and trapping of photogenerated charges at the ZnO interface. Inclusion of the additional PC61BM layer led to effective quenching of electron-hole recombination by a reduction in the number of accumulated charges at the surface of ZnO ripples. This resulted in a 16% increase in the efficiency of inverted BHJ solar cells to 7.7%, compared to solar cells without the additional PC61BM layer.