ABSTRACT
A universal approach for enhancing water affinity in polymer photocatalysts by covalently attaching hydrophilic photocrosslinkers to polymer chains is presented. A series of bisdiazirine photocrosslinkers, each comprising bisdiazirine photophores linked by various aliphatic (CL-R) or ethylene glycol-based bridge chains (CL-TEG), is designed to prevent crosslinked polymer photocatalysts from degradation through a safe and efficient photocrosslinking reaction at a wavelength of 365 nm. When employing the hydrophilic CL-TEG as a photocrosslinker with polymer photocatalysts (F8BT), the hydrogen evolution reaction (HER) rate is considerably enhanced by 2.5-fold compared to that obtained using non-crosslinked F8BT photocatalysts, whereas CL-R-based photocatalysts yield HER rates comparable to those of non-crosslinked counterparts. Photophysical analyses including time-resolved photoluminescence and transient absorption measurements reveal that adding CL-TEG accelerates exciton separation, forming long-lived charge carriers. Additionally, the in-depth study using molecular dynamics simulations elucidates the dual role of CL-TEG: it enhances water penetration into the polymer matrix and stabilizes charge carriers after exciton generation against undesirable recombination. Therefore, the strategy highlights endowing a high-permittivity environment within polymer photocatalyst in a controlled manner is crucial for enhancing photocatalytic redox reactivity. Furthermore, this study shows that this hydrophilic crosslinker approach has a broad applicability in general polymer semiconductors and their nanoparticulate photocatalysts.
ABSTRACT
Multiexciton in singlet exciton fission represents a critical quantum state with significant implications for both solar cell applications and quantum information science. Two distinct fields of interest explore contrasting phenomena associated with the geminate triplet pair: one focusing on the persistence of long-lived correlation and the other emphasizing efficient decorrelation. Despite the pivotal nature of multiexciton processes, a comprehensive understanding of their dependence on the structural and spin properties of materials is currently lacking in experimental realizations. To address this gap in knowledge, molecular engineering was employed to modify the TIPS-tetracene structures, enabling an investigation of the structure-property relationships in spin-related multiexciton processes. In lieu of the time-resolved electron paramagnetic resonance technique, two time-resolved magneto-optical spectroscopies were implemented for quantitative analysis of spin-dependent multiexciton dynamics. The utilization of absorption and fluorescence signals as complementary optical readouts, in the presence of a magnetic field, provided crucial insights into geminate triplet pair dynamics. These insights encompassed the duration of multiexciton correlation and the involvement of the spin state in multiexciton decorrelation. Furthermore, simulations based on our kinetic models suggested a role for quintet dilution in multiexciton dynamics, surpassing the singlet dilution principle established by the Merrifield model. The integration of intricate model structures and time-resolved magneto-optical spectroscopies served to explicitly elucidate the interplay between structural and spin properties in multiexciton processes. This comprehensive approach not only contributes to the fundamental understanding of these processes but also aligns with and reinforces previous experimental studies of solid states and theoretical assessments.
ABSTRACT
Tin-lead (Sn-Pb) perovskite solar cells (PSCs) have gained interest as candidates for the bottom cell of all-perovskite tandem solar cells due to their broad absorption of the solar spectrum. A notable challenge arises from the prevalent use of the hole transport layer, PEDOT:PSS, known for its inherently high doping level. This high doping level can lead to interfacial recombination, imposing a significant limitation on efficiency. Herein, NaOH is used to dedope PEDOT:PSS, with the aim of enhancing the efficiency of Sn-Pb PSCs. Secondary ion mass spectrometer profiles indicate that sodium ions diffuse into the perovskite layer, improving its crystallinity and enlarging its grains. Comprehensive evaluations, including photoluminescence and nanosecond transient absorption spectroscopy, confirm that dedoping significantly reduces interfacial recombination, resulting in an open-circuit voltage as high as 0.90 V. Additionally, dedoping PEDOT:PSS leads to increased shunt resistance and high fill factor up to 0.81. As a result of these improvements, the power conversion efficiency is enhanced from 19.7% to 22.6%. Utilizing NaOH to dedope PEDOT:PSS also transitions its nature from acidic to basic, enhancing stability and exhibiting less than a 7% power conversion efficiency loss after 1176 h of storage in N2 atmosphere.
ABSTRACT
In this study, we present a comprehensive investigation into the charge generation mechanism in bulk-heterojunction organic solar cells employing non-fullerene acceptors (NFAs) both with and without the presence of processing additives. While photovoltaic devices based on Y6 or BTP-eC9 have shown remarkable power conversion efficiencies, the underlying charge generation mechanism in polymer:NFA blends remains poorly understood. To shed light on this, we employ transient absorption (TA) spectroscopy to elucidate the charge transfer pathway within a blend of the donor polymer PM6 and NFAs. Interestingly, the charge carrier lifetimes of neat Y6 and BTP-eC9 are comparable, both reaching up to 20 ns. However, the PM6:BTP-eC9 blend exhibits substantially higher charge carrier generation and a longer carrier lifetime compared to PM6:Y6 blend films, leading to superior performance. By comparing TA data obtained from PM6:Y6 or PM6:BTP-eC9 blend films with and without processing additives, we observe significantly enhanced charge carrier generation and prolonged charge carrier lifetimes in the presence of these additives. These findings underscore the potential of manipulating excited species as a promising avenue for further enhancing the performance of organic solar cells. Moreover, this understanding contributes to the advancement of NFA-based systems and the optimization of charge transfer processes in polymer:NFA blends.
ABSTRACT
An unprecedented but useful functionality of perfluoroarenes to enable exciton scissoring in photomultiplication-type organic photodiodes (PM-OPDs) is reported. Perfluoroarenes that are covalently connected to polymer donors via a photochemical reaction enable the demonstration of high external quantum efficiency and B-/G-/R-selective PM-OPDs without the use of conventional acceptor molecules. The operation mechanism of the suggested perfluoroarene-driven PM-OPDs, how covalently bonded polymer donor:perfluoroarene PM-OPDs can perform as effectively as polymer donor:fullerene blend-based PM-OPDs, is investigated. By employing a series of arenes and conducting steady-state/time-resolved photoluminescence and transient absorption spectroscopy analyses, it is found that interfacial band bending between the perfluoroaryl group and polymer donor is responsible for exciton scissoring and subsequent electron trapping, which induces photomultiplication. Owing to the acceptor-free and covalently interconnected photoactive layer in the suggested PM-OPDs, superior operational and thermal stabilities are observed. Finally, finely patterned B-/G-/R-selective PM-OPD arrays that enable the construction of highly sensitive passive matrix-type organic image sensors are demonstrated.
ABSTRACT
Non-fullerene acceptors have recently attracted tremendous interest due to their potential as alternatives to fullerene derivatives in bulk-heterojunction solar cells. Nevertheless, physical understanding of charge carrier generation and transfer mechanism that occurred at the interface between the non-fullerene molecule and donor polymer is still behind their enhanced photovoltaic performance. Here we report examples of a non-planar perylene dimer (TP) as an electron acceptor and achieve a power conversion efficiency of 6.29% in a fullerene-free solar cell. Photoluminescence (PL) measurements show high quenching efficiency driven by the excitons of both conjugated polymer and TP molecule, respectively, indicating efficient electron and hole transfer, which can support a highly intermixed phase of blends measured by atomic force microscopy (AFM) and grazing incident wide-angle X-ray diffraction (GIWAXS). Femtosecond transient absorption spectroscopy (fs-TAS) reveals that the fast exciton dissociation process from TP molecule to donor polymer contributes to additionally increasing current density, leading to stronger incident photon to current efficiency in the visible region.
ABSTRACT
Narrowband photoresponsive molecules are highly coveted in high-resolution imaging, sensing, and monochromatic photodetection, especially those extending into the near-infrared (NIR) spectral range. Here, a new class of J-aggregating materials based on quinoidal indacenodithiophenes (IDTs) that exhibit an ultra-narrowband (full width half maxima of 22 nm) NIR absorption peak centered at 770 nm is reported. The spectral width is readily tuned by the length of the solubilizing alkyl group, with longer chains resulting in significant spectral narrowing. The J-aggregate behavior is confirmed by a combination of excited state lifetime measurements and single-crystal X-ray diffraction measurements. Their utility as electron-transporting materials is demonstrated in both transistor and phototransistor devices, with the latter demonstrating good response at NIR wavelengths (780 nm) over a range of intensities.
ABSTRACT
To separately explore the importance of hydrophilicity and backbone planarity of polymer photocatalyst, a series of benzothiadiazole-based donor-acceptor alternating copolymers incorporating alkoxy, linear oligo(ethylene glycol) (OEG) side chain, and backbone fluorine substituents is presented. The OEG side chains in the polymer backbone increase the surface energy of the polymer nanoparticles, thereby improving the interaction with water and facilitating electron transfer to water. Moreover, the OEG-attached copolymers exhibit enhanced intermolecular packing compared to polymers with alkoxy side chains, which is possibly attributed to the self-assembly properties of the side chains. Fluorine substituents on the polymer backbone produce highly ordered lamellar stacks with distinct π-π stacking features; subsequently, the long-lived polarons toward hydrogen evolution are observed by transient absorption spectroscopy. In addition, a new nanoparticle synthesis strategy using a methanol/water mixed solvent is first adopted, thereby avoiding the screening effect of surfactants between the nanoparticles and water. Finally, hydrogen evolution rate of 26 000 µmol g-1 h-1 is obtained for the copolymer incorporated with both OEG side chains and fluorine substituents under visible-light irradiation (λ > 420 nm). This study demonstrates how the glycol side chain strategy can be further optimized for polymer photocatalysts by controlling the backbone planarity.
ABSTRACT
Achieving the simultaneous increases in the open circuit voltage (V oc), short circuit current (J sc) and fill factor (FF) necessary to further increase the power conversion efficiency (PCE) of organic photovoltaics (OPV) requires a unified understanding of how molecular and device parameters affect all three characteristics. In this contribution, we introduce a framework that for the first time combines different models that have been used separately to describe the different steps of the charge generation and collection processes in OPV devices: a semi-classical rate model for charge recombination processes in OPV devices, zero-dimensional kinetic models for the photogeneration process and exciton dissociation and one-dimensional semiconductor device models. Using this unified multi-scale model in conjunction with experimental techniques (time-resolved absorption spectroscopy, steady-state and transient optoelectronic measurements) that probe the various steps involved in charge generation we can shed light on how the energy offsets in a series of polymer: non-fullerene devices affect the charge carrier generation, collection, and recombination properties of the devices. We find that changing the energy levels of the donor significantly affects not only the transition rates between local-exciton (LE) and charge-transfer (CT) states, but also significantly changes the transition rates between CT and charge-separated (CS) states, challenging the commonly accepted picture of charge generation and recombination. These results show that in order to obtain an accurate picture of charge generation in OPV devices, a variety of different experimental techniques under different conditions in conjunction with a comprehensive model of processes occurring at different time-scales are required.
ABSTRACT
A conjugated polymer particle in an aqueous phase is covalently networked in 3D by crosslinking with azide groups, leading to significantly enhanced activity-a high photocatalytic H2 evolution rate (11 024 µmol g-1 h-1 (λ > 420 nm)) and a high apparent quantum yield (up to 0.8%). The reaction between the photoactive azide and the alkyl chains of the conjugated polymer provides more intact intermolecular polymeric interactions in the colloidal state, thus preventing physical swelling and inhibiting the recombination of photoproduced carriers. The covalent network efficiently promotes exciton diffusion, which greatly facilitates charge separation and transfer. The azide photo-crosslinking also leads to more compact and better-packed nanoparticles in the aqueous phase and efficient transfer of excitons to the outer surface of the nanoparticles, where photocatalytic reactions occur. These results show that photo-crosslinking can suppress the adverse effects of alkyl chains which inhibit photocatalytic performance. Therefore, covalent crosslinking is a promising strategy for the development of solar and hydrogen energy.
ABSTRACT
The charge carrier dynamics in organic solar cells and organic-inorganic hybrid metal halide perovskite solar cells, two leading technologies in thin-film photovoltaics, are compared. The similarities and differences in charge generation, charge separation, charge transport, charge collection, and charge recombination in these two technologies are discussed, linking these back to the intrinsic material properties of organic and perovskite semiconductors, and how these factors impact on photovoltaic device performance is elucidated. In particular, the impact of exciton binding energy, charge transfer states, bimolecular recombination, charge carrier transport, sub-bandgap tail states, and surface recombination is evaluated, and the lessons learned from transient optical and optoelectronic measurements are discussed. This perspective thus highlights the key factors limiting device performance and rationalizes similarities and differences in design requirements between organic and perovskite solar cells.
ABSTRACT
Organic semiconductor nanoparticles (NPs) composed of an electron donor/acceptor (D/A) semiconductor blend have recently emerged as an efficient class of hydrogen-evolution photocatalysts. It is demonstrated that using conjugated polymers functionalized with (oligo)ethylene glycol side chains in NP photocatalysts can greatly enhance their H2 -evolution efficiency compared to their nonglycolated analogues. The strategy is broadly applicable to a range of structurally diverse conjugated polymers. Transient spectroscopic studies show that glycolation facilitates charge generation even in the absence of a D/A heterojunction, and further suppresses both geminate and nongeminate charge recombination in D/A NPs. This results in a high yield of photogenerated charges with lifetimes long enough to efficiently drive ascorbic acid oxidation, which is correlated with greatly enhanced H2 -evolution rates in the glycolated NPs. Glycolation increases the relative permittivity of the semiconductors and facilitates water uptake. Together, these effects may increase the high-frequency relative permittivity inside the NPs sufficiently, to cause the observed suppression of exciton and charge recombination responsible for the high photocatalytic activities of the glycolated NPs.
ABSTRACT
Fungi associated with macroalgae are less known when compared with those on wood in the marine environment. In this study, we assessed the diversity of fungi associated with the red alga Pterocladiella capillacea at Chao-Jin Park, Keelung, Taiwan. Algal segments of healthy and dead thalli were washed/sterilized with different solutions (sterile artificial seawater, 70% ethanol, and 4% sodium hypochlorite), plated on three different media (glucose-yeast extract-peptone seawater agar (GYPS), potato dextrose seawater agar (PDAS), and artificial seawater agar (SA)), and isolated as pure cultures. Identification was mainly based on BLAST search analysis of the internal transcribed spacers of rDNA (ITS). The highest isolation frequency (no. of segment with fungi/total no. of segment × 100) was in dead thalli (61.23%), thalli washed with seawater (88.38%), and thalli plated on GYPS (62.10%). A total of 3187 isolates were cultured, representing 129 taxa (in 67 genera); the higher species richness was isolated from healthy thalli (119 species), thalli washed with seawater (111 species), and on GYPS (112 species). Ascomycota (Eurotiales, Hypocreales, Capnodiales, Pleosporales, Xylariales) dominated the fungal community in P. capillacea with many basidiomycetous yeasts and few Mucoromycota. Aspergillus, Cladosporium, Penicillium (Ascomycota), and Rhodosporidium (Basidiomycota) were the dominant genera associated with the alga. The surface washing/sterilization schemes of algal thalli affected fungal diversity, but the isolation media used did not. While these genera are known producers of antimicrobial secondary metabolites, they might form a mutualistic relationship with P. capillacea by exchanging nutrients from photosynthesis for protection from microbial diseases.
ABSTRACT
Limited light absorption beyond the UV region and rapid photocarrier recombination are critical impediments for the improved photocatalytic performance of carbon quantum dots (CQDs) under visible-light irradiation. Herein, we demonstrate single-step microwave-assisted syntheses of O-CQDs (typical CQDs terminated by carboxylic and hydroxyl functional groups) from a sucrose precursor and Cl-doped CQDs (Cl-CQDs) from a sucralose precursor in short reaction times and without using obligatory strong acids for Cl doping. The doping of Cl into the CQDs is observed to widen the absorption range and facilitate an enhanced separation of photoexcited charge carriers, which is confirmed by the results of optical absorption, photothermal response, and pump-probe ultrafast transient absorption spectroscopy measurements of the O-CQDs and Cl-CQDs. The photoexcited charge carriers with their longer lifetimes in Cl-CQDs enabled the quick degradation of methylene blue dye, rapid conversion of Ag+ ions to metallic Ag nanoparticles on the CQD surfaces, and reduction of GO to a well-dispersed rGO through the photoelectron transfer reactions under visible-light irradiation. The facile Cl doping strategy, hybridization of Ag nanoparticles or rGO to CQDs, and the elevated charge separation mechanism would open up new avenues in designing CQD-based materials for futuristic applications.
ABSTRACT
Minimizing the energy offset between the lowest exciton and charge-transfer (CT) states is a widely employed strategy to suppress the energy loss (Eg/q - VOC) in polymer:non-fullerene acceptor (NFA) organic solar cells (OSCs). In this work, transient absorption spectroscopy is employed to determine CT state lifetimes in a series of low energy loss polymer:NFA blends. The CT state lifetime is observed to show an inverse energy gap law dependence and decreases as the energy loss is reduced. This behavior is assigned to increased mixing/hybridization between these CT states and shorter-lived singlet excitons of the lower gap component as the energy offset ΔECT-S1 is reduced. This study highlights how achieving longer exciton and CT state lifetimes has the potential for further enhancement of OSC efficiencies.
ABSTRACT
A bulk-heterojunction (BHJ) structure of organic semiconductor blend is widely used in photon-to-electron converting devices such as organic photodetectors (OPD) and photovoltaics (OPV). However, the impact of the molecular structure on the interfacial electronic states and optoelectronic properties of the constituent organic semiconductors is still unclear, limiting further development of these devices for commercialization. Herein, the critical role of donor molecular structure on OPD performance is identified in highly intermixed BHJ blends containing a small-molecule donor and C60 acceptor. Blending introduces a twisted structure in the donor molecule and a strong coupling between donor and acceptor molecules. This results in ultrafast exciton separation (<1 ps), producing bound (binding energy â¼135 meV), localized (â¼0.9 nm), and highly emissive interfacial charge transfer (CT) states. These interfacial CT states undergo efficient dissociation under an applied electric field, leading to highly efficient OPDs in reverse bias but poor OPVs. Further structural twisting and molecular-scale aggregation of the donor molecules occur in blends upon thermal annealing just above the transition temperature of 150 °C at which donor molecules start to reorganize themselves without any apparent macroscopic phase-segregation. These subtle structural changes lead to significant improvements in charge transport and OPD performance, yielding ultralow dark currents (â¼10-10 A cm-2), 2-fold faster charge extraction (in µs), and nearly an order of magnitude increase in effective carrier mobility. Our results provide molecular insights into high-performance OPDs by identifying the role of subtle molecular structural changes on device performance and highlight key differences in the design of BHJ blends for OPD and OPV devices.
ABSTRACT
Semiconducting polymers are versatile materials for solar energy conversion and have gained popularity as photocatalysts for sunlight-driven hydrogen production. Organic polymers often contain residual metal impurities such as palladium (Pd) clusters that are formed during the polymerization reaction, and there is increasing evidence for a catalytic role of such metal clusters in polymer photocatalysts. Using transient and operando optical spectroscopy on nanoparticles of F8BT, P3HT, and the dibenzo[b,d]thiophene sulfone homopolymer P10, we demonstrate how differences in the time scale of electron transfer to Pd clusters translate into hydrogen evolution activity optima at different residual Pd concentrations. For F8BT nanoparticles with common Pd concentrations of >1000 ppm (>0.1 wt %), we find that residual Pd clusters quench photogenerated excitons via energy and electron transfer on the femto-nanosecond time scale, thus outcompeting reductive quenching. We spectroscopically identify reduced Pd clusters in our F8BT nanoparticles from the microsecond time scale onward and show that the predominant location of long-lived electrons gradually shifts to the F8BT polymer when the Pd content is lowered. While a low yield of long-lived electrons limits the hydrogen evolution activity of F8BT, P10 exhibits a substantially higher hydrogen evolution activity, which we demonstrate results from higher yields of long-lived electrons due to more efficient reductive quenching. Surprisingly, and despite the higher performance of P10, long-lived electrons reside on the P10 polymer rather than on the Pd clusters in P10 particles, even at very high Pd concentrations of 27000 ppm (2.7 wt %). In contrast, long-lived electrons in F8BT already reside on Pd clusters before the typical time scale of hydrogen evolution. This comparison shows that P10 exhibits efficient reductive quenching but slow electron transfer to residual Pd clusters, whereas the opposite is the case for F8BT. These findings suggest that the development of even more efficient polymer photocatalysts must target materials that combine both rapid reductive quenching and rapid charge transfer to a metal-based cocatalyst.
ABSTRACT
Wavelength-selective harvesting by organic solar cells (OSCs) has attracted significant research attention due to the unique potential of these materials for smart photovoltaic window applications. Here, a visibly transparent OSC is demonstrated by utilizing both near-infrared (NIR)-absorbing polymer donor and nonfullerene acceptor (NFA) materials with narrow optical band gaps of less than 1.4 eV. Despite the substantial overlap in absorption spectra between the donor and acceptor, sufficient lowest unoccupied molecular orbital (LUMO) and highest occupied molecule orbital (HOMO) energy offsets for efficient charge separation with concurrent very low voltage losses yield a power conversion efficiency (PCE) of 9.13%. Moreover, with the introduction of an ultrathin Ag film (8 nm) as a transparent top electrode, semitransparent OSCs exhibit an excellent dual-side photovoltaic performance of 5.7 and 3.9% under bottom and top illumination, respectively, with high transmittance reaching 60% at wavelengths from 400 to 600 nm. This approach is expected to provide a new perspective in developing the highly efficient and transparent OSCs.
ABSTRACT
A high diversity of fungi was discovered on various substrates collected at the marine shallow-water Kueishan Island Hydrothermal Vent Field, Taiwan, using culture and metabarcoding methods but whether these fungi can grow and play an active role in such an extreme environment is unknown. We investigated the combined effects of different salinity, temperature and pH on growth of ten fungi (in the genera Aspergillus, Penicillium, Fodinomyces, Microascus, Trichoderma, Verticillium) isolated from the sediment and the vent crab Xenograpsus testudinatus. The growth responses of the tested fungi could be referred to three groups: (1) wide pH, salinity and temperature ranges, (2) salinity-dependent and temperature-sensitive, and (3) temperature-tolerant. Aspergillus terreus NTOU4989 was the only fungus which showed growth at 45 °C, pH 3 and 30 salinity, and might be active near the vents. We also carried out a transcriptome analysis to understand the molecular adaptations of A. terreus NTOU4989 under these extreme conditions. Data revealed that stress-related genes were differentially expressed at high temperature (45 °C); for instance, mannitol biosynthetic genes were up-regulated while glutathione S-transferase and amino acid oxidase genes down-regulated in response to high temperature. On the other hand, hydrogen ion transmembrane transport genes and phenylalanine ammonia lyase were up-regulated while pH-response transcription factor was down-regulated at pH 3, a relative acidic environment. However, genes related to salt tolerance, such as glycerol lipid metabolism and mitogen-activated protein kinase, were up-regulated in both conditions, possibly related to maintaining water homeostasis. The results of this study revealed the genetic evidence of adaptation in A. terreus NTOU4989 to changes of environmental conditions.