ABSTRACT
With the burgeoning growth of the livestock and aquaculture industries, antibiotic residues in treated wastewater have become a serious ecological threat. Traditional biological wastewater treatment technologies-while effective for removing conventional pollutants, such as organic carbon, ammonia and phosphate-struggle to eliminate emerging contaminants, notably antibiotics. Recently, the use of microalgae has emerged as a sustainable and promising approach for the removal of antibiotics due to their non-target status, rapid growth and carbon recovery capabilities. This review aims to analyse the current state of antibiotic removal from wastewater using algae-bacteria symbiosis systems and provide valuable recommendations for the development of livestock/aquaculture wastewater treatment technologies. It (1) summarises the biological removal mechanisms of typical antibiotics, including bioadsorption, bioaccumulation, biodegradation and co-metabolism; (2) discusses the roles of intracellular regulation, involving extracellular polymeric substances, pigments, antioxidant enzyme systems, signalling molecules and metabolic pathways; (3) analyses the role of treatment facilities in facilitating algae-bacteria symbiosis, such as sequencing batch reactors, stabilisation ponds, membrane bioreactors and bioelectrochemical systems; and (4) provides insights into bottlenecks and potential solutions. This review offers valuable information on the mechanisms and strategies involved in the removal of antibiotics from livestock/aquaculture wastewater through the symbiosis of microalgae and bacteria.
Subject(s)
Anti-Bacterial Agents , Aquaculture , Livestock , Microalgae , Symbiosis , Wastewater , Water Pollutants, Chemical , Aquaculture/methods , Wastewater/chemistry , Wastewater/microbiology , Microalgae/metabolism , Animals , Water Pollutants, Chemical/metabolism , Bacteria/metabolism , Waste Disposal, Fluid/methods , Biodegradation, EnvironmentalABSTRACT
The incomplete degradation of antibiotics in water can produce intermediates that carry environmental risks and thus warrant concerns. In this study, the degradation of high concentrations of antibiotic sulfadiazine (SDZ) by advanced oxidation processes that leverage different reactive oxide species was systematically evaluated in terms of the influence of different degradation intermediates on the propagation of antibiotic resistance genes (ARGs). The ozone, persulfate, and photocatalytic oxidation systems for SDZ degradation are dominated by ozone, direct electron transfer, and singlet oxygen, hole, and superoxide radicals, respectively. These processes produce 15 intermediates via six degradation pathways. Notably, it was determined that three specific intermediates produced by the ozone and persulfate systems were more toxic than SDZ. In contrast, the photocatalytic system did not produce any intermediates with toxicity exceeding that of SDZ. Microcosm experiments combined with metagenomics confirmed significant changes in microbiota community structure after treatment with SDZ and its intermediates, including significant changes in the abundance of Flavobacterium, Dungenella, Archangium, and Comamonas. This treatment also led to the emergence of sulfonamide ARGs. The total abundance of sulfonamide ARGs was found to be positively correlated with residual SDZ concentration, with the lowest total abundance observed in the photocatalytic system. Additionally, the correlation analysis unveiled microbiota carrying sulfonamide ARGs.
Subject(s)
Anti-Bacterial Agents , Drug Resistance, Microbial , Oxidation-Reduction , Sulfadiazine , Water Pollutants, Chemical , Water Pollutants, Chemical/toxicity , Drug Resistance, Microbial/genetics , Anti-Bacterial Agents/toxicity , Biodegradation, EnvironmentalABSTRACT
The study investigated the inactivation of Microcystis aeruginosa using a combined approach involving thermally activated peroxyacetic acid (Heat/PAA) and thermally activated persulfate (Heat/PDS). The Heat/PDS algal inactivation process conforms to first-order reaction kinetics. Both hydroxyl radical (â¢OH) and sulfate radical (SO4-â¢) significantly impact the disruption of cell integrity, with SO4-⢠assuming a predominant role. PAA appears to activate organic radicals (ROâ¢), hydroxyl (â¢OH), and a minimal amount of singlet oxygen (1O2). A thorough analysis underscores persulfate's superior ability to disrupt algal cell membranes. Additionally, SO4-⢠can convert small-molecule proteins into aromatic hydrocarbons, accelerating cell lysis. PAA can accelerate cell death by diffusing into the cell membrane and triggering advanced oxidative reactions within the cell. This study validates the effectiveness of the thermally activated persulfate process and the thermally activated peroxyacetic acid as strategies for algae inactivation.
Subject(s)
Microcystis , Oxidation-Reduction , Reactive Oxygen Species , Microcystis/drug effects , Microcystis/metabolism , Reactive Oxygen Species/metabolism , Sulfates/metabolism , Sulfates/pharmacology , Sulfates/chemistry , Peracetic Acid/pharmacology , Hot Temperature , Hydroxyl Radical/metabolism , KineticsABSTRACT
This review article explores the challenges associated with landfill leachate resulting from the increasing disposal of municipal solid waste in landfills and open areas. The composition of landfill leachate includes antibiotics (0.001-100 µg), heavy metals (0.001-1.4 g/L), dissolved organic and inorganic components, and xenobiotics including polyaromatic hydrocarbons (10-25 µg/L). Conventional treatment methods, such as biological (microbial and phytoremediation) and physicochemical (electrochemical and membrane-based) techniques, are available but face limitations in terms of cost, accuracy, and environmental risks. To surmount these challenges, this study advocates for the integration of artificial intelligence (AI) and machine learning (ML) to strengthen treatment efficacy through predictive analytics and optimized operational parameters. It critically evaluates the risks posed by recalcitrant leachate components and appraises the performance of various treatment modalities, both independently and in tandem with biological and physicochemical processes. Notably, physicochemical treatments have demonstrated pollutant removal rates of up to 90% for various contaminants, while integrated biological approaches have achieved over 95% removal efficiency. However, the heterogeneous nature of solid waste composition further complicates treatment methodologies. Consequently, the integration of advanced ML algorithms such as Support Vector Regression, Artificial Neural Networks, and Genetic Algorithms is proposed to refine leachate treatment processes. This review provides valuable insights for different stakeholders specifically researchers, policymakers and practitioners, seeking to fortify waste disposal infrastructure and foster sustainable landfill leachate management practices. By leveraging AI and ML tools in conjunction with a nuanced understanding of leachate complexities, a promising pathway emerges towards effectively addressing this environmental challenge while mitigating potential adverse impacts.
Subject(s)
Machine Learning , Waste Disposal Facilities , Water Pollutants, Chemical , Water Pollutants, Chemical/analysis , Refuse Disposal/methods , Biodegradation, Environmental , Solid Waste , Metals, Heavy/analysis , Artificial IntelligenceABSTRACT
Fruit and vegetable wastes are linked to the depletion of natural resources and can pose serious health and environmental risks (e.g. eutrophication, water and soil pollution, and GHG emissions) if improperly managed. Current waste management practices often fail to recover high-value compounds from fruit wastes. Among emerging valorization methods, the utilization of fruit wastes as a feedstock for microalgal biorefineries is a promising approach for achieving net zero waste and sustainable development goals. This is due to the ability of microalgae to efficiently sequester carbon dioxide through photosynthesis, utilize nutrients in wastewater, grow in facilities located on non-arable land, and produce several commercially valuable compounds with applications in food, biofuels, bioplastics, cosmetics, nutraceuticals, pharmaceutics, and various other industries. However, the application of microalgal biotechnology towards upcycling fruit wastes has yet to be implemented on the industrial scale due to several economic, technical, operational, and regulatory challenges. Here, we identify sources of fruit waste along the food supply chain, evaluate current and emerging fruit waste management practices, describe value-added compounds in fruit wastes, and review current methods of microalgal cultivation using fruit wastes as a fermentation medium. We also propose some novel strategies for the practical implementation of industrial microalgal biorefineries for upcycling fruit waste in the future.
ABSTRACT
This study aimed to investigate bone char's physicochemical transformations through co-torrefaction and co-pyrolysis processes with biomass. Additionally, it aimed to analyze the carbon sequestration process during co-torrefaction of bone and biomass and optimize the process parameters of co-torrefaction. Finally, the study sought to evaluate the arsenic sorption capacity of both torrefied and co-torrefied bone char. Bone and biomass co-torrefaction was conducted at 175 °C-300 °C. An orthogonal array of Taguchi techniques and artificial neural networks (ANN) were employed to investigate the influence of various torrefaction parameters on carbon dioxide sequestration within torrefied bone char. A co-torrefied bone char, torrefied at a reaction temperature of 300 °C, a heating rate of 15 °C·min-1, and mixed with 5 g m of biomass (wood dust), was selected for the arsenic (III) sorption experiment due to its elevated carbonate content. The results revealed a higher carbonate fraction (21%) in co-torrefied bone char at 300 °C compared to co-pyrolyzed bone char (500-700 °C). Taguchi and artificial neural network (ANN) analyses indicated that the relative impact of process factors on carbonate substitution in bone char followed the order of co-torrefaction temperature (38.8%) > heating rate (31.06%) > addition of wood biomass (30.1%). Co-torrefied bone chars at 300 °C exhibited a sorption capacity of approximately 3 mg g-1, surpassing values observed for pyrolyzed bone chars at 900 °C in the literature. The findings suggest that co-torrefied bone char could serve effectively as a sorbent in filters for wastewater treatment and potentially fulfill roles such as a remediation agent, pH stabilizer, or valuable source of biofertilizer in agricultural applications.
Subject(s)
Arsenic , Biomass , Charcoal , Wastewater , Water Pollutants, Chemical , Arsenic/analysis , Arsenic/chemistry , Charcoal/chemistry , Wastewater/chemistry , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry , Adsorption , Bone and Bones/chemistry , Neural Networks, Computer , Animals , PyrolysisABSTRACT
Melanoma is the most lethal skin malignancy. Fucoxanthin is a marine carotenoid with significant anticancer activities. Intriguingly, Fucoxanthin's impact on human melanoma remains elusive. Signal Transducer and Activator of Transcription 3 (STAT3) represents a promising target in cancer therapy due to its persistent activation in various cancers, including melanoma. Herein, we revealed that Fucoxanthin is cytotoxic to human melanoma cell lines A2758 and A375 while showing limited cytotoxicity to normal human melanocytes. Apoptosis is a primary reason for Fucoxanthin's melanoma cytotoxicity, as the pan-caspase inhibitor z-VAD-fmk drastically abrogated Fucoxanthin-elicited clonogenicity blockage. Besides, Fucoxanthin downregulated tyrosine 705-phosphorylated STAT3 (p-STAT3 (Y705)), either inherently present in melanoma cells or inducible by interleukin 6 (IL-6) stimulation. Notably, ectopic expression of STAT3-C, a dominant-active STAT3 mutant, abolished Fucoxanthin-elicited melanoma cell apoptosis and clonogenicity inhibition, supporting the pivotal role of STAT3 blockage in Fucoxanthin's melanoma cytotoxicity. Moreover, Fucoxanthin lowered BCL-xL levels by blocking STAT3 activation, while ectopic BCL-xL expression rescued melanoma cells from Fucoxanthin-induced killing. Lastly, Fucoxanthin was found to diminish the levels of JAK2 with dual phosphorylation at tyrosine residues 1007 and 1008 in melanoma cells, suggesting that Fucoxanthin impairs STAT3 signaling by blocking JAK2 activation. Collectively, we present the first evidence that Fucoxanthin is cytotoxic selectively against human melanoma cells while sparing normal melanocytes. Mechanistically, Fucoxanthin targets the JAK2/STAT3/BCL-xL antiapoptotic axis to provoke melanoma cell death. This discovery implicates the potential application of Fucoxanthin as a chemopreventive or therapeutic strategy for melanoma management.
Subject(s)
Antineoplastic Agents , Apoptosis , Melanoma , Signal Transduction , Xanthophylls , Humans , Antineoplastic Agents/pharmacology , Antineoplastic Agents/toxicity , Apoptosis/drug effects , bcl-X Protein/metabolism , Cell Line, Tumor , Janus Kinase 2/metabolism , Melanoma/drug therapy , Melanoma/metabolism , Signal Transduction/drug effects , STAT3 Transcription Factor/metabolism , Xanthophylls/pharmacologyABSTRACT
Organic contaminants, notorious for their complexity and resistance to degradation, are prevalent in aquatic environments, posing severe threats to ecosystems. Sulfate radical-based advanced oxidation processes (SR-AOPs), known for their stability and high effectiveness, have become a common choice for treating organic wastewater. Metal-organic framework materials (MOFs) have garnered substantial attention due to their facile chemical manipulation, unique structural configurations, and other favorable properties. Therefore, this article critically reviews recent advances in research involving the utilization of Fe-based MOFs (Fe-MOFs) and their derivatives in SR-AOPs. Specifically, it highlights the manipulation of influencing factors within the system to enhance the degradation of organic pollutants. The mechanisms and applications underlying the degradation of organic pollutants in the SR-AOPs system are also elucidated.
ABSTRACT
The wettability of the surface of hydrophilic cotton fabrics was modified using a one-step protocol with tannic acid (TA) to provide its excess catechol groups to be grafted with 1-eicosanamine at pH 8.5 and room temperature with catalysts CuSO4/H2O2. The modification over the synthesis conditions revised the contact angles of water and diiodomethane droplets from 132.68 ± 0.49° to 143.95 ± 0.80° and from 100.08°±1.42° to 82.96 ± 1.38°, respectively. The corresponding dispersive of the so-yielded cotton surface ranged from 8.6 to 16.0 mJ/m2, and the polar components ranged from 0.08 to 2.7 mJ/m2, much lower than polytetrafluoroethylene. The modified cotton fabrics are omniphobic and can repel water and commercial oil products. The absorption tests revealed that the modified cotton fabrics absorbed 1.10 g hexane/g cotton by contacting hexane (top)-water (bottom) layers and absorbed 1.26 g hexane/g cotton by contacting water first for 30 s, then hexane for another 30 s. The modified fabrics reveal good absorption reusability as hexane absorbent is even pre-saturated with water. This conclusion is also valid for commercial unleaded gasoline #95 and diesel. A parametric study revealed that the added catalysts and prolonged reaction time would enhance the hydrophobicity of the surface. These modified cotton fabrics can absorb oil from water and oil spills. Mechanisms corresponding to this observation are discussed.
Subject(s)
Cotton Fiber , Hexanes , Polyphenols , Hydrogen PeroxideABSTRACT
The microalgal-based production of fucoxanthin has emerged as an imperative research endeavor due to its antioxidant, and anticancer properties. In this study, three brown marine microalgae, namely Skeletonema costatum, Chaetoceros gracilis, and Pavlova sp., were screened for fucoxanthin production. All strains displayed promising results, with Pavlova sp. exhibiting the highest fucoxanthin content (27.91 mg/g) and productivity (1.16 mg/L·day). Moreover, the influence of various cultivation parameters, such as culture media, salinity, sodium nitrate concentration, inoculum size, light intensity, and iron concentration, were investigated and optimized, resulting in a maximum fucoxanthin productivity of 7.89 mg/L·day. The investigation was further expanded to large-scale outdoor cultivation using 50 L tubular photobioreactors, illustrating the potential of Pavlova sp. and the cultivation process for future commercialization. The biomass and fucoxanthin productivity for the large-scale cultivation were 70.7 mg/L·day and 4.78 mg/L·day, respectively. Overall, the findings demonstrated considerable opportunities for fucoxanthin synthesis via microalgae cultivation and processing.
Subject(s)
Haptophyta , Microalgae , Xanthophylls , Light , Photobioreactors , BiomassABSTRACT
Mercury (Hg) pollution poses a significant environmental challenge. One promising method for its removal is the sorption of mercuric ions using biochar. FeS-doped biochar (FBC) exhibits effective mercury adsorption, however may release excess iron into the surrounding water. To address this issue, a novel magnetic pyrrhotite/magnetite-doped biochar with a core-shell structure was synthesized for the adsorption of 2-valent mercury (Hg(II)). The proposed synthesis process involved the use of algae powder and ferric sulfate in a one-step method. By varying the ratio of ferric sulfate and alga powder (within the range of 0.18 - 2.5) had a notable impact on the composition of FBC. As the ferric sulfate content increased, the FBC exhibited a higher concentration of oxygen-containing groups. To assess the adsorption capacity, Langmuir and Freundlich adsorption models were applied to the experimental data. The most effective adsorption was achieved with FBC-4, reaching a maximum capacity (Qm) of 95.51 mg/g. In particular, at low Hg(II) concentrations, FBC-5 demonstrated the ability to reduce Hg(II) concentrations to less than 0.05 mg/L within 30 min. Additionally, the stability of FBC was confirmed within the pH range of 3.8 - 7.2. The study also introduced a model to analyze the adsorption preference for different Hg(II) species. Calomel was identified in the mercury saturated FBC, whereas the core-shell structure exhibited excellent conductivity, which most likely contributed to the minimal release of iron. In summary, this research presents a novel and promising method for synthesizing core-shell structured biochar and provides a novel approach to explore the adsorption contribution of different metal species.
Subject(s)
Chlorella , Ferric Compounds , Mercury , Water Pollutants, Chemical , Powders , Mercury/analysis , Charcoal/chemistry , Iron/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , KineticsABSTRACT
This study utilized corn straw as the feedstock to synthesize biochar (BC) loaded with cobalt-zeolitic imidazolate framework nanoparticles and boron nitride quantum dots. The prepared BC composite, named BN3Z0.5BC, efficiently activated peracetic acid (PAA), resulting in the degradation of 94.8% of sulfadiazine (SDZ) in five minutes. Compared to pure BC, the SDZ removal rate increased nearly 5-fold. Mechanism analysis revealed that the main degradation pathway involves synergism between free and non-free radicals. The defect structure on the BC surface possesses a high charge density, stimulating PAA to produce more active species, while nitrogen-oxygen vacancy formation significantly promotes charge transfer. Besides, the unique structure of BC ensures good stability and recyclability, effectively controlling metal leaching. The BN3Z0.5BC/PAA system shows promising applicability across various water matrices, indicating a favorable application outlook.
Subject(s)
Charcoal , Peracetic Acid , Water Pollutants, Chemical , Oxidation-Reduction , Water Pollutants, Chemical/chemistry , Free Radicals , Anti-Bacterial AgentsABSTRACT
Biochar is a promising carbon sink whose application can assist in reducing carbon emissions. Development of this technology currently relies on experimental trials, which are time-consuming and labor-intensive. Machine learning (ML) technology presents a potential solution for streamlining this process. This review summarizes the current research on ML's applications in biochar production, characterization, and applications. It briefly explains commonly used machine learning algorithms and discusses prospects and challenges. A hybrid model that combines ML with mechanism-based analysis could be a future trend, addressing the ML's black-box nature. While biochar studies have adopted ML technology, current works mostly use lab-scale data for model training. Further work is needed to develop ML models based on pilot or industrial-scale data to realize the use of ML techniques for the field application of biochar.
Subject(s)
Carbon , Charcoal , Algorithms , Machine LearningABSTRACT
The circular bioeconomy (CBE) presents a sustainable solution for the pig farming system, delivering economic and environmental benefits. This shift from a linear to a CBE model is anticipated to result in substantial economic, environmental, and social transformations. In this study, the CBE outcomes are evaluated with Scenarios (1 to 3): (1) pig farming and anaerobic digestion (AD) only, (2) pig farming, AD, and microalgae system (MS) with partial microalgae-based biomass (MB) recycle, and (3) pig farming, AD, and MS without MB recycle. Through economic and life cycle analyses, the internal rate of return for Scenarios (1 to 3) are 13.3%, 15.0%, and 12.3%, respectively, but the corresponding endpoint indicators are 483pt, 363pt, and 398pt. To address the best CBE, Scenario 2 by using MB product as a pig feed supplement could achieve higher revenue as well as lower environmental impact.
Subject(s)
Microalgae , Water Purification , Animals , Swine , Biofuels , Agriculture , Farms , BiomassABSTRACT
Enzymatic hydrolysis is an essential step in the lignocellulosic biorefining process. In this paper, Box-Behnken was used to optimize the enzymatic hydrolysis process of corn stalk, and the promotion effect of three typical surfactants on the enzymatic hydrolysis process was investigated. The experimental results showed that the total reducing sugar yield reached 67.6% under the best-predicted conditions. When the concentration of Tween 80 is 0.1%, it could be increased to 80.2%. In addition, the Impeded Michaels Model (IMM) is introduced in this study to describe the enzymatic hydrolysis process of corn stalks. Finally, the initial contact coefficient between the enzyme and cellulose (Kobs,0) and the gradual loss coefficient of enzyme activity (ki) caused by reaction obstruction were obtained by fitting data, which successfully verified the rationality of the model.
Subject(s)
Cellulose , Zea mays , Polysorbates , Hydrolysis , Surface-Active AgentsABSTRACT
Using bone char for contaminated wastewater treatment and soil remediation is an intriguing approach to environmental management and an environmentally friendly way of recycling waste. The bone char remediation strategy for heavy metal-polluted wastewater was primarily affected by bone char characteristics, factors of solution, and heavy metal (HM) chemistry. Therefore, the optimal parameters of HM sorption by bone char depend on the research being performed. Regarding enhancing HM immobilization by bone char, a generic strategy for determining optimal parameters and predicting outcomes is crucial. The primary objective of this research was to employ artificial neural network (ANN) technology to determine the optimal parameters via sensitivity analysis and to predict objective function through simulation. Sensitivity analysis found that for multi-metals sorption (Cd, Ni, and Zn), the order of significance for pyrolysis parameters was reaction temperature > heating rate > residence time. The primary variables for single metal sorption were solution pH, HM concentration, and pyrolysis temperature. Regarding binary sorption, the incubation parameters were evaluated in the following order: HM concentrations > solution pH > bone char mass > incubation duration. This approach can be used for further experiment design and improve the immobilization of HM by bone char for water remediation.
Subject(s)
Metals, Heavy , Soil Pollutants , Water Pollutants, Chemical , Water Purification , Water , Neural Networks, ComputerABSTRACT
The escalating demand for long-chain polyunsaturated fatty acids (PUFAs) due to their vital health effects has deepened the exploration of sustainable sources. Thraustochytrium sp. stands out as a promising platform for omega-3 and 6 PUFA production. This research strategically optimizes key parameters: temperature, salinity, pH, and G:Y:P ratio and the optimized conditions for maximum biomass, total lipid, and DHA enhancement were 28 °C, 50 %, 6, and 10:1:2 respectively. Process optimization enhanced 32.30 and 31.92 % biomass (9.88 g/L) and lipid (6.57 g/L) yield. Notably, DHA concentration experienced a substantial rise of 69.91 % (1.63 g/L), accompanied by notable increases in EPA and DPA by 82.69 % and 31.47 %, respectively. MANOVA analysis underscored the statistical significance of the optimization process (p < 0.01), with all environmental factors significantly influencing biomass and lipid data (p < 0.05), particularly impacting DHA production. Thraustochytrium sp. can be a potential source of commercial DHA production with the fine-tuning of these key process parameters.
Subject(s)
Fatty Acids, Omega-3 , Stramenopiles , Biomass , Fatty Acids, Unsaturated , Docosahexaenoic Acids , Eicosapentaenoic Acid , Fatty AcidsABSTRACT
Electrospun nanofiber membranes have emerged as a novel catalyst, demonstrating exceptional efficacy in advanced oxidation processes (AOPs) for the degradation of organic pollutants. Their superior performance can be attributed to their substantial specific surface area, high porosity, ease of modification, rapid recovery, and unparalleled chemical stability. This paper aims to comprehensively explore the progressive applications and underlying mechanisms of electrospun nanofibers in AOPs, which include Fenton-like processes, photocatalysis, catalytic ozonation, and persulfate oxidation. A detailed discussion on the mechanism and efficiency of the catalytic process, which is influenced by the primary components of the electrospun catalyst, is presented. Additionally, the paper examines how concentration, viscosity, and molecular weight affect the characteristics of the spinning materials and seeks to provide a thorough understanding of electrospinning technology to enhance water treatment methods. The review proposes that electrospun nanofiber membranes hold significant potential for enhancing water treatment processes using advanced oxidation methods. This is attributed to their advantageous properties and the tunable nature of the electrospinning process, paving the way for advancements in water treatment through AOPs.
Subject(s)
Nanofibers , Water Pollutants, Chemical , Water Purification , Nanofibers/chemistry , Oxidation-Reduction , Water Purification/methods , Water Pollutants, Chemical/chemistryABSTRACT
Seaweeds are photosynthetic marine macroalgae known for their rapid biomass growth and their significant contributions to global food and feed production. Seaweeds play a crucial role in mitigating various environmental issues, including greenhouse gases, ocean acidification, hypoxia, and eutrophication. Tropical seaweeds are typically found in tropical and subtropical coastal zones with warmer water temperatures and abundant sunlight. These tropical seaweeds are rich sources of proteins, vitamins, minerals, fibers, polysaccharides, and bioactive compounds, contributing to their health-promoting properties and their diverse applications across a range of industries. The productivity, cultivability, nutritional quality, and edibility of tropical seaweeds have been well-documented. This review article begins with an introduction to the growth conditions of selected tropical seaweeds. Subsequently, the multifunctional properties of tropical seaweeds including antioxidant and anti-inflammatory, anti-coagulant, anti-carcinogenic and anti-proliferative, anti-viral, therapeutic and preventive properties were comprehensively evaluated. The potential application of tropical seaweeds as functional foods and feeds, as well as their contributions to sustainable cosmetics, bioenergy, and biofertilizer production were also highlighted. This review serves as a valuable resource for researchers involved in seaweed farming as it provides current knowledge and insights into the cultivation and utilization of seaweeds.
ABSTRACT
There is currently an escalating global demand for the utilization of plant and natural extracts as pesticides due to their minimal health risks. Cyanobacteria are highly valuable organisms with significant potential in agriculture and are of great interest for the development of agrochemical agents as biopesticides. The flexibility and adaptability of Cyanobacteria to various environmental conditions are facilitated by the presence of specialized enzymes involved in the production of biologically active diverse secondary metabolites, including alkaloids, lipopolysaccharides, non-protein amino acids, non-ribosomal peptides, polyketides, terpenoids, and others. This review focuses on the metabolites synthesized from cyanobacteria that have demonstrated effectiveness as antibacterial, antiviral, antifungal agents, insecticides, herbicides, and more. The potential role of cyanobacteria as an alternative to chemical pesticides for environmental conservation is discussed.