Carbon Corrosion Induced by Surface Defects Accelerates Degradation of Platinum/Graphene Catalysts in Oxygen Reduction Reaction.

Graphene supported electrocatalysts have demonstrated remarkable catalytic performance for oxygen reduction reaction (ORR). However, their durability and cycling performance are greatly limited by Oswald ripening of platinum (Pt) and graphene support corrosion. Moreover, comprehensive studies on the mechanisms of catalysts degradation under 0.6-1.6 V versus RHE (Reversible Hydrogen Electrode) is still lacking. Herein, degradation mechanisms triggered by different defects on graphene supports are investigated by two cycling protocols. In the start-up/shutdown cycling (1.0-1.6 V vs. RHE), carbon oxidation reaction (COR) leads to shedding or swarm-like aggregation of Pt nanoparticles (NPs). Theoretical simulation results show that the expansion of vacancy defects promotes reaction kinetics of the decisive step in COR, reducing its reaction overpotential. While under the load cycling (0.6-1.0 V vs. RHE), oxygen containing defects lead to an elevated content of Pt in its oxidation state which intensifies Oswald ripening of Pt. The presence of vacancy defects can enhance the transfer of electrons from graphene to the Pt surface, reducing the d-band center of Pt and making it more difficult for the oxidation state of platinum to form in the cycling. This work will provide comprehensive understanding on Pt/Graphene catalysts degradation mechanisms.

Regulating the Pore Structure of Activated Carbon by Pitch for High-Performance Sodium-Ion Storage.

The pore structure of carbon anodes plays a crucial role in enhancing the sodium storage capacity. Designing more confined pores in carbon anodes is accepted as an effective strategy. However, current design strategies for confined pores in carbon anodes fail to achieve both high capacity and initial Coulombic efficiency (ICE) simultaneously. Herein, we develop a strategy for utilizing the repeated impregnation and precarbonization method of liquid pitch to regulate the pore structure of the activated carbon (AC) material. Driven by capillary coalescence, the pitch is impregnated into the pores of AC, which reduces the specific surface area of the material. During the carbonization process, numerous pores with diameters less than 1 nm are formed, resulting in a high capacity and improved ICE of the carbon anode. Moreover, the ordered carbon layers derived from the liquid pitch also enhance the electrical conductivity, thereby improving the rate capability of as-obtained carbon anodes. This enables the fabricated material (XA-4T-1300) to have a high ICE of 91.1% and a capacity of 383.0 mA h g-1 at 30 mA g-1. The capacity retention is 95.5% after 300 cycles at 1 A g-1. This study proposes a practical approach to adjust the microcrystalline and pore structures to enhance the performance of sodium-ion storage in materials.

Releasing Free Radicals in Precursor Triggers the Formation of Closed Pores in Hard Carbon for Sodium-Ion Batteries.

Increasing closed pore volume in hard carbon is considered to be the most effective way to enhance the electrochemical performance in sodium-ion batteries. However, there is a lack of systematic insights into the formation mechanisms of closed pores at molecular level. In this study, a regulation strategy of closed pores via adjustment of the content of free radicals is reported. Sufficient free radicals are exposed by part delignification of bamboo, which is related to the formation of well-developed carbon layers and rich closed pores. In addition, excessive free radicals from nearly total delignification lead to more reactive sites during pyrolysis, which competes for limited precursor debris to form smaller microcrystals and therefore compact the material. The optimal sample delivers a large closed pore volume of 0.203 cm3 g-1, which leads to a high reversible capacity of 350 mAh g-1 at 20 mA g-1 and enhanced Na+ transfer kinetics. This work provides insights into the formation mechanisms of closed pores at molecular level, enabling rational design of hard carbon pore structures.

Biomass-based controllable morphology of carbon microspheres with multi-layer hollow structure for superior performance in supercapacitors.

The electrochemical properties of corn starch (CS)-based hydrothermal carbon microsphere (CMS) electrode materials for supercapacitor are closely related to their structures. Herein, cetyltrimethyl ammonium bromide (CTAB) was used as a soft template to form the corn starch (CS)-based carbon microspheres with radial hollow structure in the inner and middle layers by hydrothermal and sol-gel method. Due to the introduction of multi-layer hollow structure of carbon microsphere, more micropores were produced during CO2 activation, which increased the specific surface area and improved the capacitance performance. Compared to commercial activated carbon, the four different morphologies of corn starch CMS had better electrochemical performances. Consequently, the proposed CO2-(CTAB)-CS-CS exhibits a high discharge specific capacitance of 242.5F/g at 1 A/g in three-electrode system with 6 M KOH electrolyte, better than commercial activated carbon with 208.5F/g. Moreover, excellent stability is achieved for CO2-(CTAB)-CS-CS with approximately 97.14 % retention of the initial specific capacitance value after 10,000 cycles at a current density of 2 A/g, while the commercial activated carbon has 86.96 % retention. This implies that the corn starch-based multilayer hollow CMS could be a promising electrode material for high-performance supercapacitors.

Constructing a Low-Cost Si-NSs@C/NG Composite by a Ball Milling-Catalytic Pyrolysis Method for Lithium Storage.

Silicon-based composites are promising candidates as the next-generation anode materials for high-performance lithium-ion batteries (LIBs) due to their high theoretical specific capacity, abundant reserves, and reliable security. However, expensive raw materials and complicated preparation processes give silicon carbon anode a high price and poor batch stability, which become a stumbling block to its large-scale practical application. In this work, a novel ball milling-catalytic pyrolysis method is developed to fabricate a silicon nanosheet@amorphous carbon/N-doped graphene (Si-NSs@C/NG) composite with cheap high-purity micron-size silica powder and melamine as raw materials. Through systematic characterizations such as XRD, Raman, SEM, TEM and XPS, the formation process of NG and a Si-NSs@C/NG composite is graphically demonstrated. Si-NSs@C is uniformly intercalated between NG nanosheets, and these two kinds of two-dimensional (2D) materials are combined in a surface-to-surface manner, which immensely buffers the stress changes caused by volume expansion and contraction of Si-NSs. Attributed to the excellent electrical conductivity of graphene layer and the coating layer, the initial reversible specific capacity of Si-NSs@C/NG is 807.9 mAh g-1 at 200 mA g-1, with a capacity retention rate of 81% in 120 cycles, exhibiting great potential for application as an anode material for LIBs. More importantly, the simple and effective process and cheap precursors could greatly reduce the production cost and promote the commercialization of silicon/carbon composites.

High-Voltage Redox Mediator of an Organic Electrolyte for Supercapacitors by Lewis Base Electrocatalysis.

Redox electrolytes for supercapacitors (SCs) have recently sparked widespread interest. Due to the redox reactions within electrolytes, they can achieve high capacitance and long cycle stability. However, the energy density of SCs with redox electrolytes is limited by the narrow applied electrochemical window due to the irreversible side reaction of redox mediators at high potential. To overcome this issue, a redox mediator with a high redox potential, tetrachloridehydroquinone (TCHQ), is added to organic electrolytes to obtain a broad electrochemical window. TCHQ is designed to undergo a dehydrogenation reaction catalyzed by N-doped activated carbon to provide capacitance. The pyrrole N atoms have the highest electrocatalytic activity based on the theoretical calculation of reaction overpotential with predicted reaction pathways due to their Lewis basicity. Benefitting from that, TCHQ shows promising reversibility with a larger electrochemical window (up to 2.7 V). As a result, a higher energy density is obtained when compared to commercial SCs. This study proposes a strategy for designing redox mediators and interfaces of SCs with high energy density and a calculation method of dehydrogenation reaction electrocatalysis.

Modification of Nitrate Ion Enables Stable Solid Electrolyte Interphase in Lithium Metal Batteries.

The lifespan of high-energy-density lithium metal batteries (LMBs) is hindered by heterogeneous solid electrolyte interphase (SEI). The rational design of electrolytes is strongly considered to obtain uniform SEI in working batteries. Herein, a modification of nitrate ion (NO3 - ) is proposed and validated to improve the homogeneity of the SEI in practical LMBs. NO3 - is connected to an ether-based moiety to form isosorbide dinitrate (ISDN) to break the resonance structure of NO3 - and improve the reducibility. The decomposition of non-resonant -NO3 in ISDN enriches SEI with abundant LiNx Oy and induces uniform lithium deposition. Lithium-sulfur batteries with ISDN additives deliver a capacity retention of 83.7 % for 100 cycles compared with rapid decay with LiNO3 after 55 cycles. Moreover, lithium-sulfur pouch cells with ISDN additives provide a specific energy of 319 Wh kg-1 and undergo 20 cycles. This work provides a realistic reference in designing additives to modify the SEI for stabilizing LMBs.

Semi-Immobilized Molecular Electrocatalysts for High-Performance Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries constitute promising next-generation energy storage devices due to the ultrahigh theoretical energy density of 2600 Wh kg-1. However, the multiphase sulfur redox reactions with sophisticated homogeneous and heterogeneous electrochemical processes are sluggish in kinetics, thus requiring targeted and high-efficient electrocatalysts. Herein, a semi-immobilized molecular electrocatalyst is designed to tailor the characters of the sulfur redox reactions in working Li-S batteries. Specifically, porphyrin active sites are covalently grafted onto conductive and flexible polypyrrole linkers on graphene current collectors. The electrocatalyst with the semi-immobilized active sites exhibits homogeneous and heterogeneous functions simultaneously, performing enhanced redox kinetics and a regulated phase transition mode. The efficiency of the semi-immobilizing strategy is further verified in practical Li-S batteries that realize superior rate performances and long lifespan as well as a 343 Wh kg-1 high-energy-density Li-S pouch cell. This contribution not only proposes an efficient semi-immobilizing electrocatalyst design strategy to promote the Li-S battery performances but also inspires electrocatalyst development facing analogous multiphase electrochemical energy processes.

Removal of azo dye from aqueous solution by a low-cost activated carbon prepared from coal: adsorption kinetics, isotherms study, and DFT simulation.

The high-risk organic pollutants produced by industries are of growing concern. The highly porous coal-based activated carbon (AC) having a specific surface area of 3452.8 m2/g is used for the adsorption of azo dye from synthetic solution. The sorbent is characterized through BET, SEM, TEM, XRD, FT-IR, TGA, and zeta potential. The sorbent exhibits - 18.7 mV surface charge, which is high enough for making suspension. The maximum dye uptake of 333 mg/g is observed in sorbent under acidic medium. The thermodynamics parameters like ∆G, ∆H, and ΔS were found to be - 12.40 kJ mol-1, 39.66 kJ mol-1, and 174.55 J mol-1 K-1 at 293 K, respectively, revealing that the adsorption mechanism is spontaneous, endothermic, and feasible. The experimental data follows the Langmuir and D-R models. The adsorption follows pseudo 2nd-order kinetics. DFT investigation shows that the dye sorption onto AC in configuration No. 4 (CFG-4) is more effective, as this configuration has high ∆H (enthalpy change) and adsorption energy (Eads). This is confirmed by Mullikan atomic charge transfer phenomenon.

Constructing Ni12P5/Ni2P Heterostructures to Boost Interfacial Polarization for Enhanced Microwave Absorption Performance.

Heterostructures with a rich phase boundary are attractive for surface-mediated microwave absorption (MA) materials. However, understanding the MA mechanisms behind the heterogeneous interface remains a challenge. Herein, a phosphine (PH3) vapor-assisted phase and structure engineering strategy was proposed to construct three-dimensional (3D) porous Ni12P5/Ni2P heterostructures as microwave absorbers and explore the role of the heterointerface in MA performance. The results indicated that the heterogeneous interface between Ni12P5 and Ni2P not only creates sufficient lattice defects for inducing dipolar polarization but also triggers uneven spatial charge distribution for enhancing interface polarization. Furthermore, the porous structure and proper component could provide an abundant heterogeneous interface to strengthen the above polarization relaxation process, thereby greatly optimizing the electromagnetic parameters and improving the MA performance. Profited by 3D porous heterostructure design, P400 could achieve the maximum reflection loss of -50.06 dB and an absorption bandwidth of 3.30 GHz with an ultrathin thickness of 1.20 mm. Furthermore, simulation results confirmed its superior ability (14.97 dB m2 at 90°) to reduce the radar cross section in practical applications. This finding may shed light on the understanding and design of advanced heterogeneous MA materials.

CoP/RGO-Pd Hybrids with Heterointerfaces as Highly Active Catalysts for Ethanol Electrooxidation.

The ethanol oxidation reaction is of critical importance to the commercial viability of direct ethanol fuel cell technology. However, owing to the poor C-C bond cleavage capability, almost all ethanol oxidation is incomplete and suffers from low selectivity toward the C1 pathway. Herein, under the support of theoretical calculations that the heterointerfaces between CoP and Pd can reduce the energy barrier of C-C bond cleavage, rich heterointerfaces in CoP/RGO-Pd hybrids were designed to improve ethanol electrooxidation performance through enhancing the selectivity toward the C1 pathway. The experimental results show that the faradaic efficiency of the C1 pathway of CoP/RGO-Pd hybrids is as high as 27.6%, surpassing most reported catalysts in the literature. As a result of this enhancement, CoP/RGO-Pd10 exhibits mass activity as high as 4597 mA·mgPd-1 and specific activity as high as 10 mA·cm-2, which are much higher than those of other Pd-based electrocatalysts.

Activated Carbon Based Supercapacitors with a Reduced Graphene Oxide Additive: Preparation and Properties.

We have successfully enhanced the performance of commercial supercapacitors that use Japan Kuraray 80F activated carbon and Super-P conductive carbon black as the conductive agent with reduced graphene oxide (rGO) additive. The ratios of conductive carbon black to rGO studied are 3:1, 5:1, 10:1, 15:1 and 1:0. The enhancement is most pronounced at 15:1, and the specific capacitance being 137.5 F g-1, which is a 23.8% improvement over the 1:0 control. The specific capacitance retention is 70.1% after 10000 cycles. The impedance resistance is also reduced to 1.5 Ω, which is 3.3 times lower than the 1:0 control. Additionally, the rGO additive does not alter the favorable pore size distribution of the primary matrix and successfully preserves its small mesoporous structure, which facilitates facile transport of electrolyte.

Structural Evolution of Phosphorus Species on Graphene with a Stabilized Electrochemical Interface.

Phosphorus doping is an effective approach to tailor the surface chemistry of carbon materials. In this work, two-dimensional graphene, as a simplified model for all sp2 hybrid carbon allotropes, is employed to explore the surface chemistry of P-doped carbon materials. Thermally reduced graphene oxide, with abundant residual oxygen functionalities, is doped by phosphorus heteroatoms through H3PO4 activation, followed by passivation in an inert atmosphere. The structural evolution of the phosphorus species in the carbon lattice during the thermal treatment is systematically studied by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and Raman spectroscopy with the assistance of first-principles calculations. The C3-P═O configuration is identified as the most stable structure in the graphene lattice and plays a key role in stabilizing the electrochemical interface between the electrode and electrolyte. These features enable an electrode based on P-doped graphene to exhibit an enlarged potential window of 1.5 V in an aqueous electrolyte, a remarkable improved cycling stability, and an ultralow leak current. Therefore, this contribution provides insights for designing phosphorus-doped carbon materials toward electrocatalysis, energy-related applications, and so forth.

Oxygen Reduction Reaction on Graphene in an Electro-Fenton System: In†Situ Generation of H2 O2 for the Oxidation of Organic Compounds.

Fenton oxidation using an aqueous mixture of Fe(2+) and H2 O2 is a promising environmental remediation strategy. However, the difficulty of storage and shipment of concentrated H2 O2 and the generation of iron sludge limit its broad application. Therefore, highly efficient and cost-effective electrocatalysts are in great need. Herein, a graphene catalyst is proposed for the electro-Fenton process, in which H2 O2 is generated in situ by the two-electron reduction of the dissolved O2 on the cathode and then decomposes to generate (.) OH in acidic solution with Fe(2+) . The π bond of the oxygen is broken whereas the σ bond is generally preserved on the metal-free reduced graphene oxide owing to the high free energy change. Consequently, the oxygen is reduced to H2 O2 through a two-electron pathway. The thermally reduced graphene with a high specific surface area (308.8 m(2) g(-1) ) and a large oxygen content (10.3 at %) exhibits excellent reactivity for the two-electron oxygen reduction reaction to H2 O2 . A highly efficient peroxide yield (64.2 %) and a remarkable decolorization of methylene blue (12 mg L(-1) ) of over 97 % in 160 min are obtained. The degradation of methylene blue with hydroxyl radicals generated in situ is described by a pseudo first-order kinetics model. This provides a proof-of-concept of an environmentally friendly electro-Fenton process using graphene for the oxygen reduction reaction in an acidic solution to generate H2 O2 .

Tuning the surface structure of supported PtNi(x) bimetallic electrocatalysts for the methanol electro-oxidation reaction.

The structures of PtNix nanoalloy particles were modified through thermal annealing in different atmospheres. The evolution of surface structures was uncovered by advanced transmission electron microscopy, and the structure-function correlation in methanol electro-oxidation was probed. It provided new insights into the design and synthesis of highly efficient electrocatalysts.

Rational Integration of Polypropylene/Graphene Oxide/Nafion as Ternary-Layered Separator to Retard the Shuttle of Polysulfides for Lithium-Sulfur Batteries.

The reversible electrochemical transformation from lithium (Li) and sulfur (S) into Li2 S through multielectron reactions can be utilized in secondary Li-S batteries with very high energy density. However, both the low Coulombic efficiency and severe capacity degradation limits the full utilization of active sulfur, which hinders the practical applications of Li-S battery system. The present study reports a ternary-layered separator with a macroporous polypropylene (PP) matrix layer, graphene oxide (GO) barrier layer, and Nafion retarding layer as the separator for Li-S batteries with high Coulombic efficiency and superior cyclic stability. In the ternary-layered separator, ultrathin layer of GO (0.0032 mg cm(-2) , estimated to be around 40 layers) blocks the macropores of PP matrix, and a dense ion selective Nafion layer with a very low loading amount of 0.05 mg cm(-2) is attached as a retarding layer to suppress the crossover of sulfur-containing species. The ternary-layered separators are effective in improving the initial capacity and the Coulombic efficiency of Li-S cells from 969 to 1057 mAh g(-1) , and from 80% to over 95% with an LiNO3 -free electrolyte, respectively. The capacity degradation is reduced from 0.34% to 0.18% per cycle within 200 cycles when the PP separator is replaced by the ternary-layered separators. This work provides the rational design strategy for multifunctional separators at cell scale to effective utilizing of active sulfur and retarding of polysulfides, which offers the possibility of high energy density Li-S cells with long cycling life.

Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts.

Lithium-sulfur (Li-S) battery system is endowed with tremendous energy density, resulting from the complex sulfur electrochemistry involving multielectron redox reactions and phase transformations. Originated from the slow redox kinetics of polysulfide intermediates, the flood of polysulfides in the batteries during cycling induced low sulfur utilization, severe polarization, low energy efficiency, deteriorated polysulfide shuttle, and short cycling life. Herein, sulfiphilic cobalt disulfide (CoS2) was incorporated into carbon/sulfur cathodes, introducing strong interaction between lithium polysulfides and CoS2 under working conditions. The interfaces between CoS2 and electrolyte served as strong adsorption and activation sites for polar polysulfides and therefore accelerated redox reactions of polysulfides. The high polysulfide reactivity not only guaranteed effective polarization mitigation and promoted energy efficiency by 10% but also promised high discharge capacity and stable cycling performance during 2000 cycles. A slow capacity decay rate of 0.034%/cycle at 2.0 C and a high initial capacity of 1368 mAh g(-1) at 0.5 C were achieved. Since the propelling redox reaction is not limited to Li-S system, we foresee the reported strategy herein can be applied in other high-power devices through the systems with controllable redox reactions.

Permselective graphene oxide membrane for highly stable and anti-self-discharge lithium-sulfur batteries.

Lithium-sulfur batteries hold great promise for serving as next generation high energy density batteries. However, the shuttle of polysulfide induces rapid capacity degradation and poor cycling stability of lithium-sulfur cells. Herein, we proposed a unique lithium-sulfur battery configuration with an ultrathin graphene oxide (GO) membrane for high stability. The oxygen electronegative atoms modified GO into a polar plane, and the carboxyl groups acted as ion-hopping sites of positively charged species (Li(+)) and rejected the transportation of negatively charged species (Sn(2-)) due to the electrostatic interactions. Such electrostatic repulsion and physical inhibition largely decreased the transference of polysulfides across the GO membrane in the lithium-sulfur system. Consequently, the GO membrane with highly tunable functionalization properties, high mechanical strength, low electric conductivity, and facile fabrication procedure is an effective permselective separator system in lithium-sulfur batteries. By the incorporation of a permselective GO membrane, the cyclic capacity decay rate is also reduced from 0.49 to 0.23%/cycle. As the GO membrane blocks the diffusion of polysulfides through the membrane, it is also with advantages of anti-self-discharge properties.

Macroporous 'bubble' graphene film via template-directed ordered-assembly for high rate supercapacitors.

A three-dimensional bubble graphene film, with controllable and uniform macropores and tailorable microstructure, was fabricated by a facile hard templating strategy and exhibit extraordinary electrochemical capacitance with high rate capability (1.0 V s(-1)).

Three-dimensional hierarchically ordered porous carbons with partially graphitic nanostructures for electrochemical capacitive energy storage.

Three-dimensional, hierarchically ordered, porous carbon (HOPC) with designed porous textures, serving as an ion-buffering reservoir, an ion-transport channel, and a charge-storage material, is expected to be advanced an energy material for high-rate supercapacitors. Herein, HOPC without/with partially graphitic nanostructures have been directly synthesized by means of a simple one-pot synthesis procedure. The designed porous textures of the 3D HOPC materials are composed of highly ordered, fcc macroporous (300 nm), interconnected porous structures, including macroporous windows (170 nm), hexagonally ordered mesopores (5.0 nm), and useful micropores (1.2 nm). 3D HOPC-g-1000 (g=graphitic, 1000=pyrolysis temperature of 1000 °C) with partially graphitic nanostructures has a low specific surface area (296 m(2) g(-1)) and a low gravimetric specific capacitance (73.4 F g(-1) at 3 mV s(-1)), but improved electrical conductivity, better rate performance, higher electrolyte accessibility (24.8 µF cm(-2) at 3 mV s(-1)), faster frequency response (≈1 Hz), and excellent cycling performance (>5400 cycles). The specific capacitance per surface area is higher than that of conventional porous carbons, carbon nanotubes, and modified graphene (10-19 µF cm(-2)).