ABSTRACT
Artificial solid electrolyte interphase (SEI) layers have been widely regarded as an effective protection for lithium (Li) metal anodes. In this work, an artificial SEI film consisting of dense Li6.4La3Zr1.4Ta0.6O12 (LLZTO) nanoparticles and polymerized styrene butadiene rubber is designed, which has good mechanical and chemical stability to effectively prevent Li anode corrosion by the electrolyte. The LLZTO-based SEI film can not only guide Li to uniformly deposit at the interface but also accelerate the electrochemical reaction kinetics due to its high Li+ conductivity. In particular, the high Young's modulus of the LLZTO-based SEI will regulate e- distribution in the continuous Li plating/stripping process and achieve uniform deposition of Li. As a consequence, the Li anode with LLZTO-based SEI (Li@LLZTO) enables symmetric cells to demonstrate a stable overpotential of 25 mV for 600 h at a current density of 1 mA cm-2 for 1 mA h cm-2. The Li@LLZTO||LFP (LiFePO4) full cell exhibits a capacity of 106 mA h g-1 after 800 cycles at 5 C with retention as high as 90%. Our strategy here suggests that the artificial SEI with high Young's modulus effectively inhibits the formation of Li dendrites and provides some guidance for the design of higher performance Li metal batteries.
ABSTRACT
Solar-light driven oxidation of benzylic alcohols over photocatalysts endows significant prospects in value-added organics evolution owing to its facile, inexpensive and sustainable process. However, the unsatisfactory performance of actual photocatalysts due to the inefficient charge separation, low photoredox potential and sluggish surface reaction impedes the practical application of this process. Herein, we developed an innovative Z-Scheme Cs3BiBr9 nanoparticles@porous C3N4 tubes (CBB-NP@P-tube-CN) heterojunction photocatalyst for highly selective benzyl alcohol oxidation. Such composite combining increased photo-oxidation potential, Z-Scheme charge migration route as well as the structural advantages of porous tubular C3N4 ensures the accelerated mass and ions diffusion kinetics, the fast photoinduced carriers dissociation and sufficient photoredox potentials. The CBB-NP@P-tube-CN photocatalyst demonstrates an exceptional performance for selective photo-oxidation of benzylic alcohol into benzaldehyde with 19, 14 and 3 times higher benzylic alcohols conversion rate than those of C3N4 nanotubes, Cs3Bi2Br9 and Cs3Bi2Br9@bulk C3N4 photocatalysts, respectively. This work offers a sustainable photocatalytic system based on lead-free halide perovskite toward large scale solar-light driven value-added chemicals production.
ABSTRACT
Converting CO2 into valuable chemicals via sustainable energy sources is indispensable for human development. Photothermal catalysis combines the high selectivity of photocatalysis and the high yield of thermal catalysis, which is promising for CO2 reduction. However, the present photothermal catalysts suffer from low activity due to their poor light absorption ability and fast recombination of photogenerated electrons and holes. Here, a TiO2@Bi2WO6 heterojunction photocatalyst featuring a hierarchical hollow structure was prepared by an in situ growth method. The visible light absorption and photothermal effect of the TiO2@Bi2WO6 photocatalyst is promoted by a hierarchical hollow structure, while the recombination phenomenon is significantly mitigated due to the construction of the heterojunction interface and the existence of excited Bi(3-x)+ sites. Such a catalyst exhibits excellent photothermal performance with a CO yield of 43.7 µmol h-1 g-1, which is 15 and 4.7 times higher than that of pure Bi2WO6 and that of physically mixed TiO2/Bi2WO6, respectively. An in situ study shows that the pathway for the transformation of CO2 into CO over our TiO2@Bi2WO6 proceeds via two important intermediates, including COO- and COOH-. Our work provides a new idea of excited states for the design and synthesis of highly efficient photothermal catalysts for CO2 conversion.
ABSTRACT
Catalytic oxidative desulfurization (ODS) using titanium silicate catalysts has emerged as an efficient technique for the complete removal of organosulfur compounds from automotive fuels. However, the precise control of highly accessible and stable-framework Ti active sites remains highly challenging. Here we reveal for the first time by using density functional theory calculations that framework hexa-coordinated Ti (TiO6) species of mesoporous titanium silicates are the most active sites for ODS and lead to a lower-energy pathway of ODS. A novel method to achieve highly accessible and homogeneously distributed framework TiO6 active single sites at the mesoporous surface has been developed. Such surface framework TiO6 species exhibit an exceptional ODS performance. A removal of 920 ppm of benzothiophene is achieved at 60°C in 60 min, which is 1.67 times that of the best catalyst reported so far. For bulky molecules such as 4,6-dimethyldibenzothiophene (DMDBT), it takes only 3 min to remove 500 ppm of DMDBT at 60°C with our catalyst, which is five times faster than that with the current best catalyst. Such a catalyst can be easily upscaled and could be used for concrete industrial application in the ODS of bulky organosulfur compounds with minimized energy consumption and high reaction efficiency.
ABSTRACT
Designing efficient, inexpensive, and stable photocatalysts to degrade organic pollutants and antibiotics has become an effective way for environmental remediation. In this work, we successfully performed in situ growth of CdS QDs on the surface of elliptical BiVO4 to try to show the advantage of the binary heterojuncted photocatalyst (BVO@CdS) for the photocatalytic degradation of tetracycline (TC). The In situ growth of CdS QDs can provide a large number of reactive sites and also generate a larger contact area with BiVO4. In addition, compared with mechanical composite materials, in situ growth can significantly reduce the energy barrier at the interface between BiVO4 and CdS, providing more channels for the separation and migration of photogenerated charge carriers, and further improving reaction activity. As a result, BVO@CdS-0.05 shows the best degradation efficiency, with a degradation rate of 88% after 30 min under visible light. The TC photodegradation follows a pseudo-second-order reaction with a dynamic constant of 0.472 min-1, which is 6.47 times that of pure BiVO4, 7.24 times that of pure CdS QDs and 2 times that of the mechanical composite. The degradation rate of BVO@CdS-0.05 decreases to 77.8% with a retention rate of 88.5% after four cycles, demonstrating excellent stability. Through liquid chromatography-mass spectrometry (LC-MS) analysis, two possible pathways for TC degradation are proposed. Through free radical capture experiments, electron spin resonance measurements, and photoelectrochemical comprehensive analysis, it is confirmed that BVO@CdS composites have constructed an efficient Z-scheme heterojunction via in situ growth, thereby highly enhancing the separation and transport efficiency of charge carriers.
ABSTRACT
The highly conjugated and hydrophobic characteristics of microporous organic networks (MONs) have largely impeded their broad applications in sample pretreatment especially for the polar or ionic analytes. In this work, a novel uniform hollow shaped sulfonate group functionalized MON (H-MON-SO3H-2) was synthesized via the sacrificial template method for the efficient solid phase extraction (SPE) of sulfonamides (SAs) from environmental water, milk, and honey samples prior to HPLC analysis. H-MON-SO3H-2 exhibited large specific surface area, penetrable space, good stability, and numerous hydrogen bonding, electrostatic, hydrophobic and π-π interaction sites, allowing sensitive SPE of SAs with wide linear range (0.150-1000 µg L-1), low limit of detection (0.045-0.188 µg L-1), good precisions (intra-day and inter-day RSD < 7.3%, n = 5), large enrichment factors (95.7-98.5), high adsorption capacities (250.4-545.0 mg g-1), and satisfactory reusability (more than 80 times). Moreover, the established method was successfully applied to extract SAs from spiked samples with the recoveries of 86.1-104.3%. This work demonstrated the great potential of H-MON-SO3H-2 in the efficient SPE of trace SAs in complex environmental water and food samples and revealed the prospect of hollow MONs in sample pretreatment.
Subject(s)
Anti-Bacterial Agents , Honey , Anti-Bacterial Agents/analysis , Honey/analysis , Solid Phase Extraction/methods , Chromatography, High Pressure Liquid/methods , Sulfanilamide/analysis , Water/chemistry , Sulfonamides/analysisABSTRACT
BACKGROUND: How physical activity (PA) and different sleep traits and overall sleep pattern interact in the development of Parkinson's disease (PD) remain unknown. OBJECTIVE: To prospectively investigate the joint associations of PA and sleep pattern with risk of PD. METHODS: Included were 339,666 PD-free participants from the UK Biobank. Baseline PA levels were grouped into low (< 600 MET-mins/week), medium (600 to < 3000 MET-mins/week) and high (≥ 3000 MET-mins/week) according to the instructions of the UK Biobank. Healthy sleep traits (chronotype, sleep duration, insomnia, snoring, and daytime sleepiness) were scored from 0 to 5 and were categorized into "ideal sleep pattern" (≥ 3 sleep scores) and "poor sleep pattern" (0-2 sleep scores). Hazard ratios (HRs) and 95% confidence intervals (CIs) of PD were estimated by Cox proportional hazards models. RESULTS: During a median of 11.8 years of follow-up, 1,966 PD events were identified. The PD risk was lower in participants with high PA (HR = 0.73; 95% CI: 0.64, 0.84), compared to those with low PA; and participants with ideal sleep pattern also had a lower risk of PD (HR = 0.78; 95% CI: 0.69, 0.87), compared to those with poor sleep pattern. When jointly investigating the combined effect, participants with both high PA and ideal sleep pattern had the lowest risk of incident PD (HR = 0.55; 95% CI: 0.44, 0.69), compared to those with low PA and poor sleep pattern; notably, participants with high PA but poor sleep pattern also gained benefit on PD risk reduction (HR = 0.74; 95% CI: 0.55, 0.99). CONCLUSIONS: Both high PA and ideal sleep pattern were independently associated with lower risk of developing PD, and those with both high PA level and ideal sleep pattern had the lowest risk. Our results suggest that improving PA levels and sleep quality may be promising intervention targets for the prevention of PD.
Subject(s)
Parkinson Disease , Humans , Cohort Studies , Parkinson Disease/epidemiology , Sleep , Exercise , Risk Reduction Behavior , Risk FactorsABSTRACT
Excessive emission of CO2 into the atmosphere has severely impacted the global ecological environment. Converting CO2 into valuable chemicals and fuels is of great significance for sustainable development. However, low activity and undesirable selectivity often result from the inherent inertness of CO2. Herein, K- or/and Zn-modified Fe-based catalysts were prepared by an incipient-wetness impregnation method for CO2 hydrogenation via a cascade reaction. The results indicate that K species exist as K2O while Zn species exist as ZnFe2O4. In the CO2 hydrogenation pathway, K2O facilitates the adsorption of CO2 and restrains the adsorption of H2, accelerating the transformation of CO2 into C2-C4 olefins rather than paraffins while Zn species promote the dispersion of Fe species, leading to improved activity. Synergistically, a K- and Zn-modified Fe-based catalyst (2Zn-10K-Fe/Al) shows excellent catalytic CO2 hydrogenation activity, achieving a CO2 conversion of 77% which is 1.8 times that (42%) of the unmodified Fe-based catalyst (Fe/Al). Our catalyst also shows a significantly promoted selectivity to C2-C4 olefins of 17% in comparison with the Fe/Al catalyst (0%). It is envisioned that such a binary effect of elements might contribute to the low-cost and industrial production of Fe-based catalysts for selective CO2 conversion.
ABSTRACT
Community-acquired bacterial meningitis (CABM) is the main cause of morbidity and mortality in children. The epidemiology of CABM is regional and highly dynamic. To clarify the diagnostic status and epidemiological characteristics of children with CABM in this region, and pay attention to the disease burden, so as to provide evidence for the prevention and treatment of CABM. By retrospective case analysis, the clinical data of 918 CABM cases in children aged 0-14 years in Zhejiang Province from January, 2019 to December, 2020 were collected. The etiological diagnosis rate of CABM in children was 23.1%, the annual incidence rate 4.42-6.15/100,000, the annual mortality rate 0.06-0.09/100,000,the cure and improvement rate 94.4%, and the case fatality rate 1.4%. The total incidence of neuroimaging abnormalities was 20.6%. The median length of stay for CABM children was 20(16) days, with an average cost of 21,531(24,835) yuan. In addition, the incidence rate was decreased with age. Escherichia coli(E.coli) and group B Streptococcus agalactiae(GBS) were the principal pathogens in CABM infant<3 months(43.3%, 34.1%), and Streptococcus pneumoniae(S. pneumoniae) was the most common pathogen in children ≥ 3 months(33.9%). In conclusion, the annual incidence and mortality of CABM in children aged 0-14 years in Zhejiang Province are at intermediate and low level. The distribution of CABM incidence and pathogen spectrum are different in age; the incidence of abnormal neuroimaging is high; and the economic burden is heavy.
Subject(s)
Meningitis, Bacterial , Child , Infant , Humans , Retrospective Studies , Meningitis, Bacterial/diagnosis , Meningitis, Bacterial/epidemiology , Meningitis, Bacterial/drug therapy , Streptococcus pneumoniae , Streptococcus agalactiae , Escherichia coli , IncidenceABSTRACT
Currently, the gut-organ axis has become a hot research topic. As increasing attention has been paid to the role of gut microbiota in the health of organs, the complex and integrated dialogue mechanism between the gastrointestinal tract and the associated microbiota has been demonstrated in more and more studies. Skin as the largest organ in the human body serves as the primary barrier protecting the human body from damage. The proposal of the gut-skin axis has established a bidirectional link between the gut and the skin. The disturbance of gut microbiota can lead to the occurrence of skin diseases, the mechanism of which is complex and may involve multiple pathways in immunity, metabolism, and internal secretion. According to the theory of traditional Chinese medicine(TCM), the connection between the intestine and the skin can be established through the lung, and the interior disorders will definitely cause symptoms on the exterior. This paper reviews the research progress in the gut-skin axis and its correlation with TCM theory and provides ideas and a basis for cli-nical treatment and drug development of skin and intestinal diseases.
Subject(s)
Gastrointestinal Microbiome , Skin Diseases , Humans , Medicine, Chinese Traditional , Gastrointestinal Tract , Skin Diseases/drug therapyABSTRACT
BACKGROUND: Inflammatory bowel disease (IBD) was associated with elevated risk of cardiometabolic diseases in observational studies. We aimed to evaluate the observational and genetic associations of Crohn's disease (CD) and ulcerative colitis (UC) with multiple cardiometabolic outcomes. METHODS: Our phenotypic and genetic association analyses included more than 400â 000 participants who were free of major cardiovascular disease and diabetes at recruitment (2006-2010) and were followed up until December 2019 based on the UK Biobank. For the Mendelian randomization (MR) analyses, 415 and 273 single nucleotide polymorphisms associated with CD and UC, respectively, were selected as genetic instruments. Summary-level data on individual cardiometabolic outcomes were obtained from 4 different genome-wide association studies with a total of 2â 248â 842 participants. RESULTS: In the multivariable-adjusted observational analyses, CD was associated with higher risks of heart failure (hazard ratio [HR], 1.72; 95% confidence interval, 1.22-2.42) and type 2 diabetes (HR, 2.11; 95% confidence interval, 1.67-2.67) but not with myocardial infarction or ischemic stroke. UC was related to increased risks of all the assessed cardiometabolic diseases (HRs ranged from 1.29 for myocardial infarction to 1.76 for type 2 diabetes). Conversely, neither the genetic risk score for CD nor that for UC was associated with higher risk of developing cardiometabolic diseases. In 2-sample MR analyses, genetically determined CD and UC were not associated with any of the assessed cardiometabolic diseases (all P valuesâ >.05). CONCLUSIONS: Despite confirming the observational associations, our study does not support a causal association between IBD and elevated risk of cardiometabolic diseases.
ABSTRACT
Purpose: To determine the renal sinus fat (RSF) volume and fat fraction (FF) in normal Chinese subjects using MRI fat fraction mapping and to explore their associations with age, gender, body mass index (BMI) and ectopic fat deposition. Methods: A total of 126 subjects were included in the analysis. RSF volume and FF, visceral adipose tissue (VAT) and subcutaneous adipose tissue (SAT) area, and hepatic and pancreatic FFs were measured for each subject. The comparisons in gender were determined using two-tailed t-tests or the nonparametric Mann-Whitney U-test for normally or non-normally distributed data for continuous variables and the chi-square test for categorical variables. Comparisons of RFS volume and FF between right and left kidneys were determined using paired sample t-tests. Multivariable logistic models were performed to confirm whether RSF differences between men and women are independent of VAT or SAT area. When parameters were normally distributed, the Pearson correlation coefficient was used; otherwise, the Spearman correlation coefficient was applied. Results: The RSF volumes (cm3) of both kidneys in men (26.86 ± 8.81 for right and 31.62 ± 10.32 for left kidneys) were significantly bigger than those of women (21.47 ± 6.90 for right and 26.03 ± 8.55 for left kidneys) (P < 0.05). The RSF FFs (%) of both kidneys in men (28.33 ± 6.73 for right and 31.21 ± 6.29 for left kidneys) were significantly higher than those of the women (23.82 ± 7.74 for right and 27.92 ± 8.15 for left kidneys) (P < 0.05). The RSF differences between men and women are independent of SAT area and dependent of VAT area (except for right RSF volume). In addition, the RSF volumes and FFs in both kidneys in the overall subjects show significant correlations with age, BMI, VAT area, hepatic fat fraction and pancreatic fat fraction (P < 0.05). However, the patterns of these correlations varied by gender. The RSF volume and FF of left kidney were significantly larger than those of the right kidney (P < 0.05). Conclusion: The association between renal sinus fat and ectopic fat deposition explored in this study may help establish a consensus on the normal values of RSF volume and FF for the Chinese population. This will facilitate the identification of clinicopathological changes and aid in the investigation of whether RSF volume and FF can serve as early biomarkers for metabolic diseases and renal dysfunction in future studies.
Subject(s)
Asian People , Kidney , Female , Humans , Male , Body Mass Index , Consensus , Kidney/diagnostic imaging , Magnetic Resonance Imaging , Pancreatic Hormones , Subcutaneous Fat/physiologyABSTRACT
The catalytic oxidative desulfurization (ODS) technique is able to remove sulfur compounds from fuels, conducive to achieving deep desulfurization for the good of the ecological environment. Ti-based metal-organic frameworks (Ti-MOFs) possessing good affinity to organic reactants and considerable numbers of Ti active sites are promising catalysts for ODS. However, current Ti-MOFs suffer from severe diffusion limitations caused by the size mismatch between sole micropores and bulky sulfur compounds, leading to poor ODS performance. Here, a facile method of intraparticle ripening without any additive is developed to obtain hierarchically meso-microporous Ti-MIL-125 single crystals (Meso-Ti-MIL-125) for the first time. Such Meso-Ti-MIL-125 shows a BET surface area of 1401 m2 g-1 and a mesoporous volume that is 1.7 times as high as that of the conventional Ti-MIL-125. Our novel Meso-Ti-MIL-125 exhibits excellent catalytic performance in the ODS of a series of bulky thiophenic sulfur compounds, completely removing benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (DMDBT) from model fuels, which is, respectively, 2.4 times, 1.5 times, and 6.7 times higher than the removal achieved with conventional Ti-MIL-125. Such a facile synthetic strategy is envisioned to be applied in many kinds of crystalline materials, such as zeolites, for industrial production.
ABSTRACT
Since China announced that it will strive to achieve carbon peak by 2030 and carbon neutrality by 2060, it has become the focus of the whole society. The implementation of carbon peaking and carbon neutrality goals requires a range of revolutionary technologies and involves an array of key scientific questions. A great deal of research has focused on the development of new concepts and innovative technologies on carbon science and sustainable development. NSR recently interviewed Professor Jing-Hai Li about the topic of the future of carbon neutrality science and technology from a scientific research perspective. Professor Li is an academician of the Chinese Academy of Sciences (CAS) at the Institute of Process Engineering, CAS. He is a scientist who has been working on exploring complex systems in chemical engineering by multi-scale methodology for more than 30 years. He proposed the concept of Mesoscience, a new interdisciplinary discipline.
ABSTRACT
Triterpenoid saponins are the main bioactive components contributed to the nutritional value of ginseng, and different process conditions will affect their content and quality. To study the holistic characterization and dynamic changes of triterpenoid saponins in Asian ginseng (ASG) and American ginseng (AMG) during soaking and decoction, a UPLC-Triple TOF-MS/MS-based metabolomics strategy was used to characterize and discover differential saponin markers. In total, 739 triterpenoid saponins (including 225 potential new saponins) were identified from ASG and AMG in untargeted metabolomics. Based on PCA and OPLS-DA, 51 and 48 saponin markers were screened from soaked and decocted ASG and AMG, respectively. Additionally, targeted metabolomics analysis and HCA of 22 ginsenoside markers suggested that decoction of ASG and AMG for 2 h to 4 h could significantly increase the contents of rare ginsenosides (G), such as G-Rg3, G-Rg5, G-F4. This study provides a scientific insight that high boiling combined with simmering enriches ASG and AMG extracts with rich rare ginsenosides that are more beneficial to human health.
Subject(s)
Ginsenosides , Panax , Saponins , Humans , Tandem Mass Spectrometry , Ginsenosides/analysis , Plant Extracts/analysis , Metabolomics , Chromatography, High Pressure LiquidABSTRACT
This study aims to improve the solubility and bioavailability of daidzein by preparing the ß-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocrystals. Specifically, the nanocrystals were prepared with daidzein as a model drug, PEG_(20000), Carbomer_(940), and NaOH as a plasticizer, a gelling agent, and a crosslinking agent, respectively. A two-step method was employed to prepare the ß-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocystals. First, the insoluble drug daidzein was embedded in ß-cyclodextrin to form inclusion complexes, which were then encapsulated in the PEG_(20000)/Carbomer_(940) nanocrystals. The optimal mass fraction of NaOH was determined as 0.8% by the drug release rate, redispersability, SEM morphology, encapsulation rate, and drug loading. The inclusion status of daidzein nanocrystals was determined by Fourier transform infrared spectroscopy(FTIR), thermogravimetric analysis(TGA), and X-ray diffraction(XRD) analysis to verify the feasibility of the preparation. The prepared nanocrystals showed the average Zeta potential of(-30.77±0.15)mV and(-37.47±0.64)mV and the particle sizes of(333.60±3.81)nm and(544.60±7.66)nm before and after daidzein loading, respectively. The irregular distribution of nanocrystals before and after daidzein loading was observed under SEM. The redispersability experiment showed high dispersion efficiency of the nanocrystals. The in vitro dissolution rate of nanocrystals in intestinal fluid was significantly faster than that of daidzein, and followed the first-order drug release kinetic model. XRD, FTIR, and TGA were employed to determine the polycrystalline properties, drug loading, and thermal stability of the nanocrystals before and after drug loading. The nanocrystals loaded with daidzein demonstrated obvious antibacterial effect. The nanocrystals had more significant inhibitory effects on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa than daidzein because of the improved solubility of daidzein. The prepared nanocrystals can significantly increase the dissolution rate and oral bioavailability of the insoluble drug daidzein.
Subject(s)
Acrylic Resins , Nanoparticles , Sodium Hydroxide , Escherichia coliABSTRACT
In the sulfotransferase (SULT) superfamily, members of the SULT1 family mainly catalyse the sulfonation reaction of phenolic compounds, which is involved in the phase II metabolic detoxification process and plays a key role in endocrine homeostasis. A coding variant rs1059491 in the SULT1A2 gene has been reported to be associated with childhood obesity. This study aimed to investigate the association of rs1059491 with the risk of obesity and cardiometabolic abnormalities in adults. This caseâcontrol study included 226 normal weight, 168 overweight and 72 obese adults who underwent a health examination in Taizhou, China. Genotyping of rs1059491 was performed by Sanger sequencing in exon 7 of the SULT1A2 coding region. Chi-squared tests, one-way ANOVA, and logistic regression models were applied. The minor allele frequencies of rs1059491 in the overweight combined with obesity and control groups were 0.0292 and 0.0686, respectively. No differences in weight and body mass index were detected between the TT genotype and GT + GG genotype under the dominant model, but the levels of serum triglycerides were significantly lower in G-allele carriers than in non-G-allele carriers (1.02 (0.74-1.32) vs. 1.35 (0.83-2.13) mmol/L, P = 0.011). The GT + GG genotype of rs1059491 versus the TT genotype reduced the risk of overweight and obesity by 54% (OR 0.46, 95% CI 0.22-0.96, P = 0.037) after adjusting for sex and age. Similar results were observed for hypertriglyceridaemia (OR 0.25, 95% CI 0.08-0.74, P = 0.013) and dyslipidaemia (OR 0.37, 95% CI 0.17-0.83, P = 0.015). However, these associations disappeared after correction for multiple tests. This study revealed that the coding variant rs1059491 is nominally associated with a decreased risk of obesity and dyslipidaemia in southern Chinese adults. The findings will be validated in larger studies including more detailed information on genetic background, lifestyle and weight change with age.