ABSTRACT
Electrochemiluminescence (ECL) involves charge transfer between electrochemical redox intermediates to produce an excited state for light emission. Ensuring precise control of charge transfer is essential for decoding ECL fundamentals, yet guidelines on how to achieve this for conventional emitters remain unexplored. Molecular ratchets offer a potential solution, as they enable the directional transfer of energy or chemicals while impeding the reverse movement. Herein, we designed 10 pairs of imine-based covalent organic frameworks as reticular ratchets to delicately manipulate the intrareticular charge transfer for directing ECL transduction from electric and chemical energies. Aligning the donor and acceptor (D-A) directions with the imine dipole effectively facilitates charge migration, whereas reversing the D-A direction impedes it. Notably, the ratchet effect of charge transfer directionality intensified with increasing D-A contrast, resulting in a remarkable 680-fold improvement in the ECL efficiency. Furthermore, dipole-controlled exciton binding energy, electron/hole decay kinetics, and femtosecond transient absorption spectra identified the electron transfer tendency from the N-end toward the C-end of reticular ratchets during ECL transduction. An exponential correlation between the ECL efficiency and the dipole difference was discovered. Our work provides a general approach to manipulate charge transfer and design next-generation electrochemical devices.
ABSTRACT
Curcumin (Cur) is a phytochemical with various beneficial properties, including antioxidant, anti-inflammatory, and anticancer activities. However, its hydrophobicity, poor bioavailability, and stability limit its application in many biological approaches. In this study, a novel amphiphilic chitosan wall material was synthesized. The process was carried out via grafting chitosan with succinic anhydride (SA) as a hydrophilic group and deoxycholic acid (DA) as a hydrophobic group; 1H-NMR, FTIR, and XRD were employed to characterize the amphiphilic chitosan (CS-SA-DA). Using a low-cost, inorganic solvent-based procedure, CS-SA-DA was self-assembled to load Cur nanomicelles. This amphiphilic polymer formed self-assembled micelles with a core-shell structure and a critical micelle concentration (CMC) of 0.093 mg·mL-1. Cur-loaded nanomicelles were prepared by self-assembly and characterized by the Nano Particle Size Potential Analyzer and transmission electron microscopy (TEM). The mean particle size of the spherical Cur-loaded micelles was 770 nm. The drug entrapment efficiency and loading capacities were up to 80.80 ± 0.99% and 19.02 ± 0.46%, respectively. The in vitro release profiles of curcumin from micelles showed a constant release of the active drug molecule. Cytotoxicity studies and toxicity tests for zebrafish exhibited the comparable efficacy and safety of this delivery system. Moreover, the results showed that the entrapment of curcumin in micelles improves its stability, antioxidant, and anti-inflammatory activity.
Subject(s)
Antioxidants , Chitosan , Curcumin , Micelles , Curcumin/pharmacology , Curcumin/chemistry , Chitosan/chemistry , Antioxidants/pharmacology , Antioxidants/chemistry , Nanoparticles/chemistry , Animals , Zebrafish , Drug Carriers/chemistry , Hydrophobic and Hydrophilic Interactions , Particle Size , Surface-Active Agents/chemistryABSTRACT
Electrochemiluminescence (ECL) is a light-emitting process that occurs via an annihilation reaction among energetic radical intermediates, whose stabilities determine the ECL efficiency. In this study, a ligand-dimerized metal-organic framework (MOF) with ultrastable anion radical is designed as an efficient nanoemitter for self-accumulated ECL. Due to the nonplanar structure of perylene diimide (PDI) derivate, two PDI ligands in the framework form a J-dimer unit with a vertical distance of â¼5.74 Å. In cathodic scanning, the ligand-dimerized MOF demonstrates three-step ECL emissions with a gradual increase in ECL intensity. Unlike the decrease in the PDI ligand, the self-accumulated ECL of the MOF was observed with 16.8-fold enhancement due to the excellent stability of radical intermediates in frameworks. Electron paramagnetic resonance demonstrated the ultrastability of free radicals in the designed frameworks, with 82.2% remaining even after one month of storage. Density functional theory calculations supported that PDI dimerization was energetically favorable upon successive electron injection. Moreover, the ECL wavelength is 610 nm, corresponding to the emission of excited dimers. The radical-stabilized reticular nanoemitters open up a new platform for decoding the fundamentals of self-accumulated ECL systems.
ABSTRACT
The intensification of pharmaceutical use globally has led to an increase in the number of water bodies contaminated by drugs, and an effective strategy must be developed to address this issue. In this work, several biochars produced from Miscanthus straw pellets (MSP550, MSP700) and wheat straw pellets (WSP550, WSP700) at 550 and 700°C, respectively, were selected as adsorbents for removing various pharmaceuticals, such as pemetrexed (PEME), sulfaclozine (SCL), and terbutaline (TBL), from the aqueous phase. The biochar characterizations (physicochemical properties, textural properties, morphological structures, and zeta potentials) and adsorptive conditions (contact times, temperatures, and pH effect) were investigated. The infrared and Raman spectra of biochars before and after pharmaceutical adsorption, as well as quantum chemical computations, were carried out to explore the adsorption mechanisms. The results showed that the general adsorption abilities of biochars for pharmaceuticals were in the order of WSP700 > MSP700 > MSP550 > WSP550. Both the higher drug concentration and higher temperature improved biochar adsorption. By decreasing the pH, the adsorption amounts increased for PEME and SCL. However, TBL exhibited the best adsorption at pH 7, whereas a weakening of affinity occurred at lower or higher pH values. Electrostatic interactions and hydrogen bonding were the main adsorptive mechanisms between all biochars and pharmaceuticals. π-π interactions played a role in the adsorption process of low-temperature-prepared biochars (MSP550 and WSP550). This work can provide new insights into the control of pharmaceuticals from water with low-cost adsorbents. PRACTITIONER POINTS: Use of biochars for pharmaceuticals removal from aqueous phase. Characterization of biochars : physical and chemical properties, textural and surface properties. Simulation calculation for characterization of pharmaceuticals. Kinetic studies of pharmaceuticals adsorption on biochars. DRIFTS and Raman analysis for the understanding of adsorption process.
Subject(s)
Charcoal , Water , Kinetics , Charcoal/chemistry , Pharmaceutical Preparations , AdsorptionABSTRACT
Although amphiphilic chitosan has been widely studied as a drug carrier for drug delivery, fewer studies have been conducted on the antimicrobial activity of amphiphilic chitosan. In this study, we successfully synthesized deoxycholic acid-modified chitosan (CS-DA) by grafting deoxycholic acid (DA) onto chitosan C2-NH2, followed by grafting succinic anhydride, to prepare a novel amphiphilic chitosan (CS-DA-SA). The substitution degree was 23.93% for deoxycholic acid and 29.25% for succinic anhydride. Both CS-DA and CS-DA-SA showed good blood compatibility. Notably, the synthesized CS-DA-SA can self-assemble to form nanomicelles at low concentrations in an aqueous environment. The results of CS, CS-DA, and CS-DA-SA against Escherichia coli and Staphylococcus aureus showed that CS-DA and CS-DA-SA exhibited stronger antimicrobial effects than CS. CS-DA-SA may exert its antimicrobial effect by disrupting cell membranes or forming a membrane on the cell surface. Overall, the novel CS-DA-SA biomaterials have a promising future in antibacterial therapy.
Subject(s)
Chitosan , Chitosan/pharmacology , Succinic Anhydrides , Micelles , Anti-Bacterial Agents/pharmacology , Deoxycholic Acid/pharmacologyABSTRACT
Stimuli-responsive smart supramolecular self-assembly with controllable morphology and adjustable rheological property has attracted widespread concern of scientists in recent years due to the great potential application in microfluidics, controlled release, biosensors and so on. In this study, a pH and UV light dual stimuli-responsive system was constructed by combining Gemini surfactant 2-hydroxyl-propanediyl-α,ω-bis(dimethyldodecyl ammonium bromide) (12-3(OH)-12·2Br-) with trans-ortho-hydroxyl cinnamic acid (trans-OHCA) in aqueous solution. The phase behavior and stimuli-responsive behavior of the system including the microstructural transition, rheological property, intermolecular interaction, and isomerization reaction were explored by various experiment techniques such as rheometer, UV-vis spectrum, polarized optical microscopy (POM), transmission electron microscopy (TEM), dynamic light scattering (DLS) as well as theoretical calculation. The system displays abundant phase behaviors that supramolecular self-assemblies of different morphologies in different states such as spherical micelle, wormlike micelle, lamellar liquid crystal, and aqueous two phase system (ATPS) were observed even at lower concentration, which provide the research basis on the abundant stimuli-responsiveness of the system. The results prove that the multiple ionization and the photo-isomerization of trans-OHCA endow the system with plentiful responses to pH and UV light stimuli. It is expected that this study on the dual stimuli-responsive system with abundant self-assembly behaviors and adjustable rheological behaviors would be of theoretical and practical importance, which would provide essential guidance in designing and constructing smart materials with multiple stimuli-responses.
ABSTRACT
Creation of bio-multifunctional wound dressings with potent hemostatic, antibacterial, anti-inflammatory, and angiogenesis features for bolstering the healing of full-thickness wounds is sought after for clinical applications. We created bio-multifunctional composite sponges by coupling alginate and chitosan with Sargassum pallidum polysaccharides through electrostatic interactions, calcium ion (Ca2+) crosslinking, and lyophilization. Alginate/chitosan (AC) sponges with different concentrations of Sargassum pallidum polysaccharides were obtained and termed AC, ACS-1%, ACS-2.5%, and ACS-5%. ACS-1% and ACS-2.5% sponges exhibited uniform porosity, high water vapor transmission rate, high water absorption, as well as good hemostatic and antibacterial abilities. ACS-2.5% sponges facilitated wound closure and promoted angiogenesis and re-epithelialization in the dermis. These data suggest that ACS sponges containing a certain amount of Sargassum pallidum polysaccharides could be employed for treatment of full-thickness skin wounds.
Subject(s)
Chitosan , Hemostatics , Sargassum , Chitosan/pharmacology , Alginates/pharmacology , Polysaccharides/pharmacology , Anti-Bacterial Agents/pharmacologyABSTRACT
Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.
Subject(s)
Chitosan , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Chitin/chemistry , Chitosan/chemistry , SolubilityABSTRACT
A new time-domain simulation protocol of two-dimensional electronic spectra with photocurrent detection is presented. Time-dependent density functional theory for open systems at finite temperature is applied to evaluate the photocurrent response to four laser pulses, and a non-perturbative phase-matching approach is implemented to extract the fourth-order photocurrent signal with a desired phase-matching condition. Simulations for an open three-level model indicates that transition dipoles interact resonantly with the incident pulses and that different sample-electrode couplings may be identified by appearance of different peaks/valleys in photocurrent spectra from different electrodes. Moreover, qualitative reproduction of experimental spectra of a PbS quantum dot photocell [Karki et al., Nat. Commun. 5(1), 5869 (2014)] reveals the stimulated electron dynamics.
ABSTRACT
Mixed systems of the Gemini cationic surfactant trimethylene-1,3-bis (dodecyldimethylammonium bromide) (12-3-12·2Br-) and the photosensitive additives trans-methoxy sodium cinnamates with different substituent positions (trans-ortho-methoxy cinnamate, trans-OMCA; trans-meta-methoxy cinnamate, trans-MMCA; and trans-para-methoxy cinnamate, trans-PMCA) were selected for investigating the effects of the substituting position of methoxy on the system phase diagram and UV light-responsive behavior of the wormlike micelles. The differences in phase behaviors of the selected systems were analyzed by calculating the potential distribution, molecular volume, and free energy of solvation of cinnamates and the binding energies between photosensitive additives and the surfactant. The photoresponsive behaviors of wormlike micelle solutions formed in the selected systems were studied by the rheological method and UV-vis and H nuclear magnetic resonance (1H NMR) spectroscopy; the kinetics of photoisomerization of trans-OMCA, trans-MMCA, and trans-PMCA were studied by first-order derivative spectrophotometry. The results reveal that the methoxy substituent position has a great influence on the phase behavior and photosensitivity of the studied systems. In addition, the photoisomerization of the studied cinnamates follows the first-order opposite reaction laws; the different reaction rates play the decisive role in the photosensitivity of the wormlike micelles. This paper would afford a deeper understanding of the UV light-responsive mechanism at the molecular level and provide essential guidance in preparing smart materials with adjustable light sensitivity.
ABSTRACT
Photoresponsive systems with controllable self-assembly morphologies and adjustable rheological properties have attracted widespread interest by researchers in the past few years. Among them, the photoresponsive systems consisting of ortho-methoxycinnamic (OMCA) and Gemini surfactants are endowed with rich self-assemblies with different states and in different scales including spherical micelles, wormlike micelles, vesicles, aqueous two-phase system (ATPS), etc. All these self-assemblies display excellent photoresponsive behavior. However, the mechanism of these photoresponsive behaviors has not been unraveled systematically so far. In this study, molecular dynamics (MD) simulations, density functional theory (DFT) calculations, transmission electron microscopy, and rheology are employed to investigate the photoresponsive behaviors of wormlike micelles caused by photoisomerization of trans-OMCA in 12-2-12·2Br-/trans-OMCA solutions and to unravel the underlying mechanisms of these photoresponsive behaviors. The experimental results show that 12-2-12·2Br-/trans-OMCA micelles display photoresponsiveness after UV-light irradiation, with the transformation of micellar morphologies from wormlike micelle to spherical micelles. In MD simulations, certain micelle morphologies in experiments and the specific packing between 12-2-12·2Br-/OMCA were successfully captured. The larger three-dimensional structure and steric hindrance of cis-OMCA disturb the interior structure of micelles. The stronger hydrophilicity of cis-OMCA induces the escape of cis-OMCA from the interval of micelles to the solution. The energy results prove that trans-OMCA associates more strongly with 12-2-12·2Br- than cis-OMCA. These causes lead to the fission and repacking of wormlike micelles.
ABSTRACT
The photoresponsive wormlike micelles constructed by Gemini surfactants and cinnamate derivatives play a great role in the field of smart materials. However, how the structure of cinnamate derivatives affects the photoresponsive behavior of micelles is still a hotspot for scientists to research. Here, three kinds of aromatic salts with different ortho-substituted groups including trans- o-methoxy cinnamate ( trans-OMCA), trans- o-hydroxy cinnamate ( trans-OHCA), and trans-cinnamate ( trans-CA) were introduced into Gemini surfactant 12-3-12·2Br- aqueous solutions to construct photoresponsive wormlike micelles through their noncovalent interactions. Their properties were researched using the rheological method, cryo-transmission electron microscopy, and 1H NMR and two-dimensional nuclear Overhauser effect spectra. The results show that these cinnamate derivatives could well construct wormlike micelles with 12-3-12·2Br-. Furthermore, subtle differences in the ortho substituents' structure have a significant effect on the photoresponsive behavior of formed wormlike micelles. Specifically, the zero viscosity (η0) of 40 mM 12-3-12·2Br-/24 mM trans-OHCA mixed solution decreases from 26.72 to 2.6 Pa·s with the shortening of the length of wormlike micelles after UV irradiation. Correspondingly, the η0 for the same ratio of 12-3-12·2Br-/ trans-OMCA decreases from 2.42 to 0.06 Pa·s and the wormlike micelles are transited into rodlike micelles and even spherical micelles after the same UV irradiation time. However, the variation of wormlike micelles in the 12-3-12·2Br-/ trans-CA system induced by UV light is not obvious with η0 being maintained at around 2.89 Pa·s. This study will help us better understand the effects of chemical groups on macrophenomena and microinteraction for micellar systems. It provides a theoretical basis for the construction of photoresponsive micelles, thus widening their application in the field of soft materials.
ABSTRACT
Phase transitions are of great importance in a diversity of fields. They are usually classified into continuous phase transitions and first-order phase transitions (FOPTs). Whereas the former has a well-developed theoretical framework of the renormalization-group (RG) theory, no general theory has yet been developed for the latter that appear far more frequently. Focusing on the dynamics of a generic FOPT in the phi4 model below its critical point, we show by a field-theoretic RG method that it is governed by an unexpected unstable fixed point of the corresponding phi3 model. Accordingly, it exhibits a distinct scaling and universality behavior with unstable exponents different from the critical ones.