Facile Synthesis of Chromium-Doped Fe1.1Mn1.9O4 Nanoparticles and the Effect of Cr Content on Their Magnetic and Structural Properties.

In the present study, Fe1.1(CrxMn1-x)1.9O4 nanoparticles (0 ≤ x ≤ 0.5) were successfully synthesized by a combustion method, and the influence of Cr substitution on the structural and magnetic properties of the obtained nanoparticles was studied by various methods. The structural analysis revealed that the sample with x = 0 has a tetragonal structure, while all Cr-doped samples crystallize into a cubic structure. Additionally, the results of TEM show that doping with chromium leads to an increase in particle size. The magnetic hysteresis loops demonstrate the behavior typical for soft magnetic materials with low coercivity and remanence magnetization. The magnetic measurements revealed that the saturation magnetization of the obtained nanoparticles demonstrates a decreasing trend with increasing Cr content. The influence of chromium doping on the observation change in saturation magnetization is discussed. Based on the results of temperature-dependent magnetization measurements, it was found that the temperature of a magnetic transition in synthesized nanoparticles depends on Cr content.

Temperature-Induced Irreversible Structural Transition in Fe1.1Mn1.9O4 Nanoparticles Synthesized by Combustion Method.

Fe1.1Mn1.9O4 nanoparticles were successfully synthesized using a combustion method. The influence of the heating temperature on the evolution of the structural and magnetic properties has been studied using various methods. The structural analysis results revealed that as-synthesized nanoparticles have a tetragonal structure with an average size of ~24 nm. The magnetic measurements of the sample showed its ferrimagnetic nature at room temperature with hysteresis at low fields. Temperature-dependent magnetization measurements allowed for the conclusion that the Curie temperature for Fe1.1Mn1.9O4 nanoparticles was ~465 °C. After high-temperature magnetic measurements, during which the samples were heated to various maximum heating temperatures (Tmax.heat.) in the range from 500 to 900 °C, it was found that the structure of the samples after cooling to room temperature depended on the heating temperature. Herewith, when the heating temperature was 600 < Tmax.heat. < 700 °C, an irreversible structural phase transition occurred, and the cooled samples retained a high-temperature cubic structure. The results of the magnetic analysis showed that the samples, following high-temperature magnetic measurements, demonstrated ferrimagnetic behavior.

Size-Dependent Magnetic and Magneto-Optical Properties of Bi-Doped Yttrium Iron Garnet Nanopowders.

Bi-doped yttrium iron garnet nanopowders were successfully synthesized by a combustion method at different synthesis conditions, and the evolution of their structural, magnetic, and magneto-optical properties has been studied by various methods. X-ray diffraction analysis revealed that crystallite size increases with increase as in annealing time (tA) well as in annealing temperature (TA) and varied from 15.2 nm (TA = 650 °C, tA = 0.5 h) to 44.5 nm (TA = 800 °C, tA = 12 h). The magnetic hysteresis loops exhibit behavior characteristic of soft magnetic materials; herewith, the saturation magnetization demonstrates a growing trend with increasing crystallite size (D). The behavior of the coercivity indicates that, at room temperature, the transition between single-domain and multidomain states occurs at D = 35.3 nm. It was found that the size effect in the MCD spectra is clearly observed for the samples with crystallite sizes less than 42.2 nm for an intersublattice charge-transfer transition and a crystal-field tetrahedral transition. The influence of cation redistribution on the observed changes has been discussed.

Carbon Double Coated Fe3O4@C@C Nanoparticles: Morphology Features, Magnetic Properties, Dye Adsorption.

This work is devoted to the study of magnetic Fe3O4 nanoparticles doubly coated with carbon. First, Fe3O4@C nanoparticles were synthesized by thermal decomposition. Then these synthesized nanoparticles, 20-30 nm in size were processed in a solution of glucose at 200 °C during 12 h, which led to an unexpected phenomenon-the nanoparticles self-assembled into large conglomerates of a regular shape of about 300 nm in size. The morphology and features of the magnetic properties of the obtained hybrid nanoparticles were characterized by transmission electron microscopy, differential thermo-gravimetric analysis, vibrating sample magnetometer, magnetic circular dichroism and Mössbauer spectroscopy. It was shown that the magnetic core of Fe3O4@C nanoparticles was nano-crystalline, corresponding to the Fe3O4 phase. The Fe3O4@C@C nanoparticles presumably contain Fe3O4 phase (80%) with admixture of maghemite (20%), the thickness of the carbon shell in the first case was of about 2-4 nm. The formation of very large nanoparticle conglomerates with a linear size up to 300 nm and of the same regular shape is a remarkable peculiarity of the Fe3O4@C@C nanoparticles. Adsorption of organic dyes from water by the studied nanoparticles was also studied. The best candidates for the removal of dyes were Fe3O4@C@C nanoparticles. The kinetic data showed that the adsorption processes were associated with the pseudo-second order mechanism for cationic dye methylene blue (MB) and anionic dye Congo red (CR). The equilibrium data were more consistent with the Langmuir isotherm and were perfectly described by the Langmuir-Freundlich model.

Core-Shell Fe3O4@C Nanoparticles for the Organic Dye Adsorption and Targeted Magneto-Mechanical Destruction of Ehrlich Ascites Carcinoma Cells.

The morphology, structure, and magnetic properties of Fe3O4 and Fe3O4@C nanoparticles, as well their effectiveness for organic dye adsorption and targeted destruction of carcinoma cells, were studied. The nanoparticles exhibited a high magnetic saturation value (79.4 and 63.8 emu/g, correspondingly) to facilitate magnetic separation. It has been shown that surface properties play a key role in the adsorption process. Both types of organic dyes-cationic (Rhodomine C) and anionic (Congo Red and Eosine)-were well adsorbed by the Fe3O4 nanoparticles' surface, and the adsorption process was described by the polymolecular adsorption model with a maximum adsorption capacity of 58, 22, and 14 mg/g for Congo Red, Eosine, and Rhodomine C, correspondingly. In this case, the kinetic data were described well by the pseudo-first-order model. Carbon-coated particles selectively adsorbed only cationic dyes, and the adsorption process for Methylene Blue was described by the Freundlich model, with a maximum adsorption capacity of 14 mg/g. For the case of Rhodomine C, the adsorption isotherm has a polymolecular character with a maximum adsorption capacity of 34 mg/g. To realize the targeted destruction of the carcinoma cells, the Fe3O4@C nanoparticles were functionalized with aptamers, and an experiment on the Ehrlich ascetic carcinoma cells' destruction was carried out successively using a low-frequency alternating magnetic field. The number of cells destroyed as a result of their interaction with Fe3O4@C nanoparticles in an alternating magnetic field was 27%, compared with the number of naturally dead control cells of 6%.

Preparation and Magnetic Properties of Cobalt-Doped FeMn2O4 Spinel Nanoparticles.

Mixed-metal oxide nanoparticles have attracted great scientific interest since they find applications in many fields. However, the synthesis of size-controlled and composition-tuned mixed-metal oxide nanoparticles is a great challenge that complicates their study for practical application. In this study, Co-doped FeMn2O4 nanoparticles were synthesized by the solvothermal method in which the crystallization was carried out under autogenous pressure at temperatures of 190 °C for 24 h. The influence of Co doping on the evolution of the structural and magnetic properties was investigated by various methods. It was found from XRD data that crystallite size decreases from 9.1 to 4.4 nm with the increase in Co content, which is in good agreement with the results of TEM. Based on the results of magnetic measurements, it was found that the saturation magnetization first increases with an increase in the cobalt content and reaches its maximum value at x = 0.4, and a further increase in x leads to a decrease in the saturation magnetization. The influence of cation redistribution on the observed changes has been discussed.

Amino-Functionalized Fe3O4@SiO2 Core-Shell Magnetic Nanoparticles for Dye Adsorption.

Fe3O4@SiO2 core-shell nanoparticles (NPs) were synthesized with the co-precipitation method and functionalized with NH2 amino-groups. The nanoparticles were characterized by X-ray, FT-IR spectroscopy, transmission electron microscopy, selected area electron diffraction, and vibrating sample magnetometry. The magnetic core of all the nanoparticles was shown to be nanocrystalline with the crystal parameters corresponding only to the Fe3O4 phase covered with a homogeneous amorphous silica (SiO2) shell of about 6 nm in thickness. The FT-IR spectra confirmed the appearance of chemical bonds at amino functionalization. The magnetic measurements revealed unusually high saturation magnetization of the initial Fe3O4 nanoparticles, which was presumably associated with the deviations in the Fe ion distribution between the tetrahedral and octahedral positions in the nanocrystals as compared to the bulk stoichiometric magnetite. The fluorescent spectrum of eosin Y-doped NPs dispersed in water solution was obtained and a red shift and line broadening (in comparison with the dye molecules being free in water) were revealed and explained. Most attention was paid to the adsorption properties of the nanoparticles with respect to three dyes: methylene blue, Congo red, and eosin Y. The kinetic data showed that the adsorption processes were associated with the pseudo-second order mechanism for all three dyes. The equilibrium data were more compatible with the Langmuir isotherm and the maximum adsorption capacity was reached for Congo red.

Synthesis of Fe1-xS Nanoparticles with Various Superstructures by a Simple Thermal Decomposition Route and Their Magnetic Properties.

Pyrrhotite nanoparticles with 5C and 3C superstructures were synthesized via a simple one-step thermal decomposition method in which hexadecylamine was used as a solvent at various reaction temperatures (TR). Structural analysis showed that at TR = 360 °C, almost uniform in size and shape Fe7S8 nanoparticles with 3C superstructure are formed, and an increase in the reaction temperature leads to the formation of Fe9S10 nanoparticles (5C superstructure), herewith a significant increase in the size of nanoparticles is observed. High-temperature magnetic measurements in 5 repeated heating-cooling cycles revealed that after the first heating branch in the Fe9S10 samples, the λ-Peak transition disappears, and the magnetization has a Weiss-type behavior characteristic of the Fe7S8 sample. The change in the behavior of magnetization can be explained by the redistribution of iron vacancies, which changes the initial phase composition of nanoparticles.

Differences in Clinical Features and Diagnostic Strategies Between IgG4-Related Autoimmune Cholangitis and Cholangiocarcinoma.

IgG4-related autoimmune cholangitis (IgG4-AIC) is often difficult to distinguish from cholangiocarcinoma (CCA). This study aimed to determine a practical clinical strategy for distinguishing between IgG4-AIC and CCA to avoid unnecessary surgical resection. We retrospectively collected and compared the clinicopathological data between IgG4-AIC and CCA patients, including the clinical, serological, and radiological characteristics, to follow up on these patients to investigate the prognosis. Among the 377 patients who received surgical resection for suspecting CCA at the Sun Yat-Sen Memorial Hospital between June 2004 and June 2014, 14 patients were diagnosed as IgG4-AIC through histochemistry after surgery. Immunohistochemistry revealed that IgG4 was up-regulated in the plasma cells of IgG4-AIC tissues in 13 out of 14 patients. The serum CA19-9 level was significantly lower than in the CCA group. Patients with IgG4-AIC can only see slight or no enhancement under the contrast enhancement CT scan, while there are no signs of ring-like or delayed enhancement that is unique to CCA. Thirteen patients were followed up, and the time was 12 to 92 months. Three of them were regularly treated with prednisone after surgery, and original symptoms disappeared. Our study demonstrated that the combination of imaging with serum CA19-9 could improve the preoperative diagnostic value and reduce the rate of unnecessary resection.

Application of quantitative analysis of contrast-enhanced ultrasonography in the evaluation of acute radiation-induced liver damage.

The aim of the present study was to evaluate the microcirculation perfusion in patients with acute radiation-induced liver damage (RILD) and explore the feasibility of non-invasive evaluation of RILD using quantitative analysis of contrast-enhanced ultrasound (CEUS). Patients who successfully underwent three-dimensional conformal intensity-modulated radiotherapy for abdominal tumors were selected. CEUS was performed on the liver prior to and 2, 3 and 4 weeks after exposure, and the time-intensity curve (TIC) was obtained by quantitative analysis of CEUS. The time to peak (TTP), gradient (Grad) and area under the curve (AUC) were analyzed offline. The Grad of the CEUS TIC was decreased and TTP increased with the prolongation of the irradiation duration, with statistically significant differences between the values in the 2-, 3- and 4-week groups vs. those prior to exposure (P<0.05), as well as among the values of the 2-, 3- and 4-week groups (P<0.05). Following irradiation, the AUC decreased gradually in the 2- and 3-week groups and increased in the 4-week group, with statistically significant differences compared with the AUC prior to irradiation (P<0.05). The quantitative analysis parameters of CEUS may be important reference parameters for the early diagnosis of acute RILD.

Quantitative analysis of contrast-enhanced ultrasonography in acute radiation-induced liver injury: An animal model.

The aim of the present study was to examine and assess contrast-enhanced ultrasound in the early diagnosis of acute radiation-induced liver injury in a rat model. Sixty female rats were used, with 50 rats being utilized to produce an animal model of liver injury with a single dose of stereotactic X-ray irradiation of 20 Gy. Ten rats from the injury group and 2 rats from the control group were randomly selected on days 3, 7, 14, 21 and 28, and examined by contrast-enhanced ultrasound and histopathology of liver specimens. The rats were divided into four groups: the normal control group, mild, moderate, and severe radioactive liver injury groups based on the histopathological examination results. Hepatic artery arriving time (HAAT) and hepatic vein arriving time (HVAT) were recorded, and hepatic artery to vein transit time (HA-HVTT) was calculated. The time-intensity curve of liver parenchyma, the time to peak (TTP) and peak intensity (PI) were also obtained. Significant differences were observed between liver injury and control groups for PI and HA-HVTT (P<0.05). PI and HA-HVTT were shorter in the severe liver injury group compared to the mild and moderate liver injury groups (P<0.05). Compared to the control group, higher TTP was recorded in all the liver injury groups (P<0.05), and the highest TTP level was observed in the severe liver injury group compared to the mild or moderate group (P<0.05). However, no significant difference was observed between the mild and moderate groups for PI, HA-HVTT and TTP. In conclusion, the results showed that contrast-enhanced ultrasonography is useful for an earlier diagnosis in a rat model of acute radiation-induced liver injury.

[Investigation and analysis of the prevalence and risk factors for impaired fasting glucose in outpatients with essential hypertension].

OBJECTIVE: To evaluate the prevalence of impaired fasting glucose (IFG) in outpatients with essential hypertension and the influencing factors. METHODS: 1026 essential hypertensive outpatients aged 15 - 87 years [531 males and 495 females, mean age (51.6 +/- 12.5) years] who visited Xuanwu hospital between February 2004 and January 2007 were recruited in the study. Their medical history, blood pressure, height, weight, waist circumferences (WC), hip circumference (HC), fasting plasma glucose (FPG), TC, TG, LDL-C, HDL-C were detected and analyzed. RESULTS: The abnormal rate of FPG in hypertensive outpatients was 38.5% and incidence of IFG was 30.5%. The differences of gender, systolic blood pressure, BMI, waist-to-hip ratio (WHR), TG, TC between the normal glucose group and the IFG group were significant. Gender, family history of diabetes mellitus, TC and LDL-C enter into the logistic regression model (P < 0.05). CONCLUSIONS: The detection rate of IFG is high in hypertensive outpatients and it is related with gender, family history of diabetes mellitus and disorders of lipid metabolism.

Regulation by ultrasound treatment on the integrin expression and differentiation of osteoblasts.

It has been shown that ultrasound (US) stimulation accelerates fracture healing in the animal models and in clinical studies. However, the mechanism by which US achieves these outcomes is not clear. Here we investigated the effect of US stimulation on the differentiation of osteoblasts and osteoclastogenesis. The effect of different intensities of US stimulation (1 MHz, continuous wave) on the osteoblastic cell line MC3T3-E1 or primary cultured osteoblasts was examined. Flow cytometry showed that US stimulation at 125 mW/cm2 for 10 min transiently increased the surface expression of alpha2, alpha5, and beta1 integrins in both MC3T3-E1 and primary osteoblasts. Fluorocytochemistry showed that the actin cytoskeleton also reorganized in response to US stimulation. When the MC3T3-E1 cells were cultured in differentiation medium containing vitamin C and beta-glycerophosphate, long-term US stimulation (10 min/day for 11 days) increased mineralized nodule formation, collagen content, and alkaline phosphatase activity. The intensity at 125 mW/cm2 exerts the most prominent action. Effect of long-term US stimulation on the osteoclastogenesis was also examined. US stimulation at a power of 62.5 or 125 mW/cm2 markedly inhibited RANKL plus M-CSF-induced osteoclastic differentiation from bone marrow stromal cells. These findings suggest that US has a regulatory effect on the integrin expression and the differentiation of osteoblasts and osteoclastogenesis, which may contribute to the beneficial effects of US on the fracture repair.