ABSTRACT
The patterns of formation of chitosan nanoparticles doped with vancomycin and coatings based on them in carbonate solutions have been investigated for the first time in this study. Using a technique of radioactive indicators, it was found that at a CO2 pressure of 30 MPa, the yield of the nanoparticles was â¼85 %, and a maximum antibiotic encapsulation efficiency of â¼30 % was achieved. By spectrophotometric and high-resolution microscopy, it was found that the coating of stabilized xenopericardial tissue of bioprosthetic heart valve, based on chitosan nanoparticles doped with vancomycin with a zeta potential |ζ| â¼20 mV completely covers collagen fibers by depositing about 60 nm nanoparticles onto them under direct deposition from carbonic acid at a pressure of 30 MPa CO2. The coating preserves the mechanical strength characteristics of collagen tissue and completely suppresses the growth of S. aureus pathogenic biofilm. This is consistent with the observed increase in antibiotic release of 15 % when the medium was acidified. Histological study demonstrated that the structure of pericardial tissues was not significantly altered by the deposition nanoparticles from carbonic acid. It was found that the rate of biodegradation of polymers and vancomycin in the coating differs by half (16 weeks for the rat model). A significantly lower degradation rate of antibiotics (â¼50 % of vancomycin total remaining mass and â¼25 % of chitosan) was associated with its reliable encapsulation into nanoparticles.
ABSTRACT
Coatings with xenogenic materials, made of detonation nanodiamonds, provide additional strength and increase elasticity. A functionally developed surface of nanodiamonds makes it possible to apply antibiotics. Previous experiments show the stability of such coatings; however, studies on stability in the bloodstream and calcification of the material in natural conditions have yet to be conducted. Tritium-labeled nanodiamonds (negative and positive) were obtained by the tritium activation method and used to develop coatings for a pork aorta to analyze their stability in a pig's bloodstream using a radiotracer technique. A chitosan layer was applied from a solution of carbonic acid under high-pressure conditions to prevent calcification. The obtained materials were used to prepare a porcine conduit, which was surgically stitched inside the pig's aorta for four months. The aorta samples, including nanodiamond-coated and control samples, were analyzed for nanodiamond content and calcium, using the radiotracer and ICP-AES methods. A histological analysis of the materials was also performed. The obtained coatings illustrate a high in vivo stability and low levels of calcification for all types of nanodiamonds. Even though we did not use additional antibiotics in this case, the development of infection was not observed for negatively charged nanodiamonds, opening up prospects for their use in developing coatings.
Subject(s)
Coated Materials, Biocompatible , Nanodiamonds , Tritium , Animals , Nanodiamonds/chemistry , Swine , Coated Materials, Biocompatible/chemistry , Tritium/chemistry , Aorta , Bioprosthesis , Chitosan/chemistry , Heart Valve ProsthesisABSTRACT
A variant of microfluidic setup design for the study of extraction kinetics has been proposed. Mass transfer constants for Am(III) and Eu(III) and observed rate constants were obtained for N-,O-donor ligands featuring phenanthroline and bipyridyl cores. The possibility of determining rate constants for cations independently of each other makes it possible to observe the kinetic effect of separation. The extraction rate was found to be lower for the bipyridyl ligand, compared to phenanthroline. The values of the rotation barriers for the ligands were calculated using the DFT method. The values correlate with the obtained low extraction rate for the bipyridyl ligand. Also, crystallographic data showing anti-conformation for the bipyridyl ligand align with the kinetic data. Surface tension was also determined for the systems with the studied ligands. It is shown that at equal ligand concentrations, the value of surface tension agrees with the extraction rate. Furthermore, it is shown that for the bipyridyl ligand, prior contact of the organic phase with nitric acid significantly affects the surface tension.
ABSTRACT
Lysozyme complexes with amikacin and levofloxacin were studied by spectroscopy approaches as well as using a tritium probe. Tritium was used as a labeling agent to trace labeled compound concentration in a system of two immiscible liquids and in the atomic form to determine the possible position of the binding site. Co-adsorption of protein and drug at the liquid-liquid interface was analyzed by scintillation phase method that allowed us to directly determine the amount of protein and drug in the mixed adsorption layer. Also, tensiometric measuring of the interfacial tension was used for calculation of binding parameters accordingly to Fainerman model. The treatment of complexes with atomic tritium followed by trypsinolysis and analysis of tritium distribution in the lysozyme peptides reveals the binding sites, binding energies in which were analyzed using molecular docking. Formation of complexes with amikacin and levofloxacin preserves secondar structure of protein. However, the formation of complex with amikacin leads to the almost total loss of the enzymatic activity of lysozyme and the redshift of the maximum on the lysozyme fluorescence band. A slight decrease in the distribution coefficient of lysozyme in the presence of amikacin assumes that the complex has higher hydrophilicity in comparison to lysozyme without additives. The most favorable for binding were the positions of the active centers that included amino acids Asp52 and Glu35, as well as in the vicinity of peptide His15-Arg21, with the participation of amino acids Tyr20, Arg14. In the case of levofloxacin, the formation of lysozyme-ligand complex in aqueous solution is possible without changing the microenvironment of the active center of the protein. Binding of levofloxacin to the active center of the enzyme was the most favorable, but Asp52 and Glu35 that are responsible for the enzymatic activity of lysozyme, were not affected.
Subject(s)
Amikacin , Muramidase , Molecular Docking Simulation , Muramidase/chemistry , Tritium/chemistry , Levofloxacin , Spectrometry, Fluorescence , Peptides , Amino AcidsABSTRACT
Humic substances (HS) are the most abundant forms of natural organic matter on the earth surface. Comprised of decomposed plant and animal materials rich in carbon, oxygen, hydrogen, nitrogen, and sulfur complexes, HS facilitate global carbon and nitrogen cycling and the transport of anthropogenic contaminants. While it is known that HS also interact with organisms at different trophic levels to produce beneficial and harmful effects whether HS exert these biological effects through accumulation remains unknown. Current radiolabeling techniques, which only detect the amount of accumulated radiolabels, cannot visualize the transport and accumulation behavior of HS. Here, using a label-free method based on pump-probe microscopy, we show HS entered the protozoan Tetrahymena thermophila, zebrafish embryos, and human cells and exerted direct effects on these organisms. HS accumulated in the nucleus of T. thermophila, chorion pore canals of zebrafish embryos, and nucleus of intestinal and lung cells in a concentration- and time-dependent way. Epigenetic and transcriptomics assays show HS altered chromatin accessibility and gene transcription in T. thermophila. In zebrafish larvae, HS induced neurotoxicity, altering spontaneous muscle contraction and locomotor activity. Detailed images showing HS accumulation in our study reveal new insights on the ecological and environmental behavior of HS.
Subject(s)
Humic Substances , Zebrafish , Animals , Humans , Humic Substances/analysis , Zebrafish/physiology , Microscopy , Bioaccumulation , Carbon , NitrogenABSTRACT
The tightly bonded shielding coating on biomatrix significantly enhances the functionality of medical devices, bioprostheses in particular. In our work we have obtained a polyelectrolyte coating on a biomatrix by sequentially depositing chitosan and hyaluronic acid (HA) from solutions in carbonic acid under pressure. This approach makes it possible to obtain hybrid biomatrix with a firmly bonded polymer screen due to the electrostatic bonding of polyions. High-precision analysis using a tritium label shows a 3-fold increase in quantity of HA in carbonic acid under pressure compared to the conventional method. The presence of the chitosan layer increases the HA adsorption by 15-20 % due to electrostatic interaction of differently charged polymers. Antimicrobial results show the possibility of implementing an induced antimicrobial response, due to the lysis of the upper layer of the coating (HA) and the release of antimicrobial agents in the case of growth of pathogens on the bioprosthesis.
Subject(s)
Anti-Infective Agents , Chitosan , Hyaluronic Acid , Carbonic Acid , Polyelectrolytes , Anti-Infective Agents/pharmacology , Anti-Bacterial Agents/pharmacology , Heart Valves , CarbonABSTRACT
The fractionation of high-level radioactive waste from nuclear power plants simplifies the handling of its components, and facilitates the reduction of radiotoxic effects on the environment. The search and study of new ligands for solvent extraction, as one of the methods in fractionation, remains a complex and important research task. In this work, four pyridine diphosphonate ligands were synthesized. These ligands are part of the class of the N,O-donor extractants, which are selective towards Am(III). The separation factor SF(Am/Eu) for the best extractant reached values up to 10. The influence of the substituents on the efficiency of extraction and complexation of trivalent f-elements, the kinetics of extraction, and the behavior of the ligand at the interface were described. The effect of nitric acid concentration on the extraction was shown. The stoichiometry of the complexes was determined by slope analysis in solvent extraction experiment and verified by spectrophotometric titration in acetonitrile. Liquid tension experiments with a pendant drop method revealed the interfacial properties of the ligands in "F-3 solvent/H2O" and "F-3 solvent/HNO3" systems. The relationship between the surface activity and the ligand structure was shown. Studies of the extraction kinetics were performed in a modified Lewis cell. The effect of the ligand structure on the extraction rate was shown. The DFT calculation with the B3LYP density functional was used to explain the extraction properties of the ligands, including selectivity. The calculation of the pre-organization energy of the ligands explained the kinetics and extraction patterns for the studied series.
Subject(s)
Chelating Agents , Organophosphonates , Fluorine , Kinetics , Ligands , Pyridines/chemistry , Solvents/chemistry , ThermodynamicsABSTRACT
Natural products (e.g., polyphenols) have been used as biologically active compounds for centuries. Still, the mechanisms of biological activity of these multicomponent systems are poorly understood due to a lack of appropriate experimental techniques. The method of tritium thermal bombardment allows for non-selective labeling and tracking of all components of complex natural systems. In this study, we applied it to label two well-characterized polyphenolic compounds, peat fulvic acid (FA-Vi18) and oxidized lignin derivative (BP-Cx-1), of predominantly hydrophilic and hydrophobic character, respectively. The identity of the labeled samples was confirmed using size exclusion chromatography. Using ultra-high resolution Fourier transform ion cyclotron resonance mass spectrometry (FT ICR MS), key differences in the molecular composition of BP-Cx-1 and FA-Vi18 were revealed. The labeled samples ([3H]-FA-Vi18 (10 mg/kg) and [3H]-BP-Cx-1 (100 mg/kg)) were administered to female BALB/c mice intravenously (i.v.) and orally. The label distribution was assessed in blood, liver, kidneys, brain, spleen, thymus, ovaries, and heart using liquid scintillation counting. Tritium label was found in all organs studied at different concentrations. For the fulvic acid sample, the largest accumulation was observed in the kidney (Cmax 28.5 mg/kg and 5.6 mg/kg, respectively) for both routes. The organs of preferential accumulation of the lignin derivative were the liver (Cmax accounted for 396.7 and 16.13 mg/kg for i.v. and p.o. routes, respectively) and kidney (Cmax accounted for 343.3 and 17.73 mg/kg for i.v. and p.o. routes, respectively). Our results demonstrate that using the tritium labeling technique enabled successful pharmacokinetic studies on polyphenolic drugs with very different molecular compositions. It proved to be efficient for tissue distribution studies. It was also shown that the dosage of the polyphenolic drug might be lower than 10 mg/kg due to the sensitivity of the 3H detection technique.
ABSTRACT
An experimental study of protein-peptide binding was performed by means of radiochemical and spectroscopic methods. Lysozyme and dalargin were chosen due to their biological and physiological importance. By means of tensiometry and radiochemical assays, it was found that dalargin possesses rather high surface activity at the aqueous-air and aqueous-p-xylene interfaces to be substituted by protein. Dalargin forms a hydrophobic complex with lysozyme in which the secondary structure of lysozyme is preserved. When lysozyme forms a mixed adsorption layer with dalargin at the aqueous-air surface, the peptide prevents protein from concentrating in the subsurface monolayer. In the presence of p-xylene protein in the interface, reorganization occurs quickly, so there is no lag in the interfacial tension time dependence. The interfacial tension in this case is controlled by protein and/or protein-peptide complexes. An increase in the enzymatic activity of lysozyme in the presence of dalargin was confirmed by a docking model that suggests the formation of hydrogen bonds between dalargin and amino acid residues in the active site.
Subject(s)
Muramidase , Water , Adsorption , Enkephalin, Leucine-2-Alanine/analogs & derivatives , Hydrophobic and Hydrophilic Interactions , Surface PropertiesABSTRACT
Nanodiamonds produced by the detonation method are used as lubricants, polishing compositions, polymer composites, etc. To reveal how nanodiamonds differ in terms of surface properties and interact with natural organic matter, we used tritium-labelled humic substances to quantitively describe their adsorption onto the nanodiamond surface. It was shown that the adsorption of humic substances onto nanodiamonds resulted in fractionation of humic substances that was strongly dependent on the zeta potential of nanodiamonds in water but did not significantly affect the uptake of nanodiamonds by wheat seedlings. The uptake of nanodiamond particles by plants was determined by the functional composition of the particle surface.
Subject(s)
Nanodiamonds , Adsorption , Humic Substances , Surface Properties , TritiumABSTRACT
Interaction between proteins and synthetic polymers that represent a perspective potential in drug delivery or/and already used in medicine plays a key role in biological functioning of both molecules along with a system as a whole. In present study association between hen egg white lysozyme and Pluronic triblock-copolymers (L121, P123 and F127) in the bulk of the solution as well as at the aqueous-air and liquid-liquid interfaces was analyzed by means of spectroscopic and radiochemical assay. In protein-Pluronic complexes lysozyme keeps the secondary structure (CD and SAXS data results), while fluorescence and UV-analysis indicates changes in the local surrounding of fluorophoric amino acid residues. Radiochemical assay in combination with molecular docking reveals the formation of the complexes, in which proline residues turned to the interface between water and hydrophobic medium.
ABSTRACT
Humic substances (HS) in the aqueous solutions can be considered as colloidal particles formed by amphiphilic units. HS form micelles-like structures at concentrations close to 5â¯g/L. However colloidal behavior of HS at concentrations below 100â¯mg/L is unknown. Using radiotracer assay we have shown that in this concentration range HS form rare adsorption layers at the liquid/liquid interface and penetrate into the organic phase with the distribution ratio close to 10-3. We found that pH and HS molecular weight strongly influence on the distribution ratio but do not significantly change the adsorption. Furthermore, colloidal properties of HS are strongly depending on its origin: the highest surface activity was shown for HS separated from peat and the least was observed for HS separated from soils. We anticipate our assay to be a helpful tool for detailed analysis and modeling HS and humic-like materials colloidal behavior in the environment.
Subject(s)
Humic Substances/analysis , Solutions/chemistry , Adsorption , Colloids , Hydrogen-Ion Concentration , Micelles , Molecular Weight , Soil , Tritium/analysisABSTRACT
Previously, we have reported that spherical particles (SPs) are formed by the thermal remodeling of rigid helical virions of native tobacco mosaic virus (TMV) at 94°C. SPs have remarkable features: stability, unique adsorption properties and immunostimulation potential. Here we performed a comparative study of the amino acid composition of the SPs and virions surface to characterize their properties and take an important step to understanding the structure of SPs. The results of tritium planigraphy showed that thermal transformation of TMV leads to a significant increase in tritium label incorporation into the following sites of SPs protein: 41-71 а.a. and 93-122 a.a. At the same time, there was a decrease in tritium label incorporation into the N- and C- terminal region (1-15 a.a., 142-158 a.a). The use of complementary physico-chemical methods allowed us to carry out a detailed structural analysis of the surface and to determine the most likely surface areas of SPs. The obtained data make it possible to consider viral protein thermal rearrangements, and to open new opportunities for biologically active complex design using information about SPs surface amino acid composition and methods of non-specific adsorption and bioconjugation.
Subject(s)
Hot Temperature , Tobacco Mosaic Virus/chemistry , Viral Proteins/chemistry , Virion/chemistry , Protein Domains , Nicotiana/virologyABSTRACT
Chitosan coatings of biological heart-valve prostheses enhance their biocompatibility, resistance to pathogenic microflora and lifetime. Collagen tissues can be coated with chitosan in aqueous solution acidified, to make chitosan soluble, with H2CO3 formed from a coexisting liquid CO2 phase under pressure. The advantage of H2CO3 is that it can be easily removed after the coating procedure. This study assessed the effects of 6-50â¯MPa CO2 pressure during the coating procedure on the structure and mechanical properties of the resulting biocomposite matrices. The dependence of chitosan adsorption on CO2 pressure was bell-shaped, reaching a maximum adsorption of 0.8 mass % at 40â¯MPa. Tissue surface became highly porous upon pressure treatment. At 50â¯MPa, the pores merged to form furrows with lengths of several hundred micrometers, accompanied by collagen fibril reorganisation. Chitosan coating did not affect tissue tensile strength in the axial direction, but increased it by 75% in the radial direction in the tissue coated at 50â¯MPa pressure. Strain at break, a measure of elasticity, increased in both directions by up to 100% upon coating with chitosan. CO2 pressure of 30-50â¯MPa seems thus optimal in terms of chitosan incorporation and tissue mechanical properties.
Subject(s)
Carbon Dioxide/chemistry , Chitosan/chemistry , Coated Materials, Biocompatible/chemistry , Collagen/chemistry , Pressure , Tissue Scaffolds/chemistry , Water/chemistry , Animals , Cattle , Coated Materials, Biocompatible/pharmacology , Pericardium/cytology , Pericardium/drug effectsABSTRACT
In this article, we study the stability of chitosan coatings applied on glutaraldehyde-stabilized bovine pericardium when exposed to biodegradation in vivo in the course of model subcutaneous tests on rats. The coatings were deposited from carbonic acid solutions, that is, H2 O saturated with CO2 at high pressure. Histological sections of treated pericardium samples demonstrated that the structure of pericardial connective tissues was not significantly altered by the coating application method. It was revealed that the dynamics of biodegradation depended on the total mass of chitosan applied as well as on the DDA of chitosan used. As long as the amount of chitosan did not exceed a certain threshold limit, no detectable degradation occurred within the time of the tests (12 weeks for the rat model). For higher chitosan amounts, we detected a â¼20% reduction of the mass after the in vivo exposition. The presumed mechanism of such behavior is discussed. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 270-277, 2018.
Subject(s)
Chitosan , Coated Materials, Biocompatible , Collagen , Materials Testing , Animals , Cattle , Chitosan/chemistry , Chitosan/pharmacology , Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacology , Collagen/chemistry , Collagen/pharmacology , RatsABSTRACT
Humic substances (HS) play important roles in the biotic-abiotic interactions of the root plant and soil contributing to plant adaptation to external environments. However, their mode of action on plants remains largely unknown. In this study the HS distribution in tissues of wheat seedlings was examined using tritium-labeled humic acid (HA) derived from leonardite (a variety of lignites) and microautoradiography (MAR). Preferential accumulation of labeled products from tritiated HA was found in the roots as compared to the shoots, and endodermis was shown to be the major control point for radial transport of label into vascular system of plant. Tritium was also found in the stele and xylem tissues indicating that labeled products from tritiated HA could be transported to shoot tissues via the transpiration stream. Treatment with HA lead to an increase in the content of polar lipids of photosynthetic membranes. The observed accumulation of labeled HA products in root endodermis and positive impact on lipid synthesis are consistent with prior reported observations on physiological effects of HS on plants such as enhanced growth and development of lateral roots and improvement/repairs of the photosynthetic status of plants under stress conditions.
Subject(s)
Humic Substances/analysis , Minerals/metabolism , Seedlings/metabolism , Triticum/metabolism , Adaptation, Physiological , Isotope Labeling , Photosynthesis , Plant Roots/metabolism , Plant Shoots/metabolism , Plant Vascular Bundle , Stress, Physiological , Tritium/metabolismABSTRACT
Humic substances (HS) represent the major reservoir of carbon (C) in ecosystems, and their turnover is crucial for understanding the global C cycle. Although basidiomycetes clearly have a role in HS degradation, much less is known about the effect of HS on fungal traits. We studied the alteration of physiological, biochemical, and morphological characteristics of Trametes maxima in the presence of HS. Both complete medium and minimal (C-limited) medium mimicking natural environmental conditions were used. Adding HS led to increased biomass yield, but under C-limited conditions the effect was more apparent. This result indicated that HS were used as an additional substrate and agreed with data showing a greater penetration of tritium-labeled HS into the cell interior under C-limited conditions. Humic substances induced ultra-structural changes in fungal cells, especially under C limitation, including reducing the thicknesses of the hyphal sheath and cell wall. In the minimal medium, cellular respiration increased nearly three-fold under HS application, while the corresponding effect in complete medium was lower. In addition, in the presence of inhibitors, HS stimulated either the cytochrome or the alternative pathway of respiration, depending on presence or absence of glucose in the medium. Our results suggest that, under conditions mimicking the natural environment, HS may play three major roles: as a surplus substrate for fungal growth, as a factor positively affecting cell morphology, and as an activator of physiological respiration.
Subject(s)
Humic Substances , Trametes/drug effects , Trametes/growth & development , Trametes/metabolism , Carbon , Humic Substances/analysis , Microscopy, Electron, Scanning , Mycology/methods , Reactive Oxygen Species/metabolism , Trametes/ultrastructureABSTRACT
Calcification of bovine pericardium dramatically shortens typical lifetimes of biological prosthetic heart valves and thus precludes their choice for younger patients. The aim of the present work is to demonstrate that the calcification is to be mitigated by means of treatment of bovine pericardium in solutions of chitosan in carbonic acid, i.e. water saturated with carbon dioxide at high pressure. This acidic aqueous fluid unusually combines antimicrobial properties with absolute biocompatibility as far as at normal pressure it decomposes spontaneously and completely into H2O and CO2. Yet, at high pressures it can protonate and dissolve chitosan materials with different degrees of acetylation (in the range of 16-33%, at least) without any further pretreatment. Even exposure of the bovine pericardium in pure carbonic acid solution without chitosan already favours certain reduction in calcification, somewhat improved mechanical properties, complete biocompatibility and evident antimicrobial activity of the treated collagen tissue. The reason may be due to high extraction ability of this peculiar compressed fluidic mixture. Moreover, exposure of the bovine pericardium in solutions of chitosan in carbonic acid introduces even better mechanical properties and highly pronounced antimicrobial activity of the modified collagen tissue against adherence and biofilm formation of relevant Gram-positive and Gram-negative strains. Yet, the most important achievement is the detected dramatic reduction in calcification for such modified collagen tissues in spite of the fact that the amount of the thus introduced chitosan is rather small (typically ca. 1wt.%), which has been reliably detected using original tritium labelling method. We believe that these improved properties are achieved due to particularly deep and uniform impregnation of the collagen matrix with chitosan from its pressurised solutions in carbonic acid.
Subject(s)
Bioprosthesis , Carbonic Acid/chemistry , Chitosan/chemistry , Collagen/chemistry , Animals , Anti-Infective Agents/chemistry , Anti-Infective Agents/pharmacology , Cattle , Collagen/metabolism , Gram-Negative Bacteria/drug effects , Gram-Positive Bacteria/drug effects , Heart Valve Prosthesis , Materials Testing , Metal Nanoparticles/chemistry , Mice , NIH 3T3 Cells , Pericardium/chemistry , Pericardium/metabolism , Rats , Silver/chemistry , Solutions/chemistry , Tensile Strength , Transplantation, Homologous , Tritium/chemistryABSTRACT
Liquid scintillation spectrometry of tritium in the application of the scintillation phase method was used for studying the adsorption of lysozyme at the liquid/liquid interface and its distribution in the bulk of the system. The goal of this research was to reveal the influence of the nature of the organic phase on the distribution and adsorption ability of the protein when it is placed in a system containing two immiscible liquids. Based on the radiochemical assay distribution coefficients and adsorption isotherms obtained for aqueous/octane, aqueous/p-xylene and aqueous/octanol systems, it was concluded that the interaction of the protein with the interface plays a dominant role in protein behavior in aqueous/organic liquid systems.
Subject(s)
Muramidase/chemistry , Octanes/chemistry , Octanols/chemistry , Tritium/chemistry , Xylenes/chemistry , Adsorption , Chromatography, Liquid , Egg White , Muramidase/isolation & purification , Muramidase/metabolism , Surface Properties , Water/chemistryABSTRACT
The primary goal of this paper is to demonstrate potential strengths of the use of tritium-labeled humic substances (HS) to quantify their interaction with living cells under various conditions. A novel approach was taken to study the interaction between a model microorganism and the labeled humic material. The bacterium Escherichia coli was used as a model microorganism. Salt stress was used to study interactions of HS with living cells under nonoptimum conditions. Six tritium-labeled samples of HS originating from coal, peat, and soil were examined. To quantify their interaction with E. coli cells, bioconcentration factors (BCF) were calculated and the amount of HS that penetrated into the cell interior was determined, and the liquid scintillation counting technique was used as well. The BCF values under optimum conditions varied from 0.9 to 13.1 liters kg(-1) of cell biomass, whereas under salt stress conditions the range of corresponding values increased substantially and accounted for 0.2 to 130 liters kg(-1). The measured amounts of HS that penetrated into the cells were 23 to 167 mg and 25 to 465 mg HS per kg of cell biomass under optimum and salt stress conditions, respectively. This finding indicated increased penetration of HS into E. coli cells under salt stress.