ABSTRACT
Despite the increasing popularity of endovascular intervention in clinical practice, there remains a lack of objective and quantitative metrics for skill evaluation of endovascular techniques. Data relating to the forces exerted during endovascular procedures and the behavioral patterns of endovascular clinicians is currently limited. This research proposes two platforms for measuring tool forces applied by operators and contact forces resulting from catheter-tissue interactions, as a means of providing accurate, objective metrics of operator skill within a realistic simulation environment. Operator manipulation patterns are compared across different experience levels performing various complex catheterization tasks, and different performance metrics relating to tool forces, catheter motion dynamics, and forces exerted on the vasculature are extracted. The results depict significant differences between the two experience groups in their force and motion patterns across different phases of the procedures, with support vector machine (SVM) classification showing cross-validation accuracies as high as 90% between the two skill levels. This is the first robust study, validated across a large pool of endovascular specialists, to present objective measures of endovascular skill based on exerted forces. The study also provides significant insights into the design of optimized metrics for improved training and performance assessment of catheterization tasks.
Subject(s)
Catheterization , Clinical Competence , Endovascular Procedures , Models, Theoretical , Motion , Support Vector Machine , HumansABSTRACT
OBJECTIVE: Conventional catheter manipulation in the arch and supra-aortic trunks carries a risk of cerebral embolization. This study proposes a platform for detailed quantitative analysis of contact forces (CF) exerted on the vasculature, in order to investigate the potential advantages of robotic navigation. METHODS: An anthropomorphic phantom representing a type I bovine arch was mounted and coupled onto a force/torque sensor. Three-axis force readings provided an average root-mean-square modulus, indicating the total forces exerted on the phantom. Each of the left subclavian, left common carotid, and right common carotid arteries was cannulated within a simulated endovascular suite with conventional (n = 42) vs robotic techniques (n = 30) by two operator groups: experts and novices. The procedure path was divided into three phases, and performance metrics corresponding to mean and maximum forces, force impact over time, standard deviation of forces, and number of significant catheter contacts with the arterial wall were extracted. RESULTS: Overall, median CF were reduced from 1.20 N (interquartile range [IQR], 0.98-1.56 N) to 0.31 N (IQR, 0.26-0.40 N; P < .001) for the right common carotid artery; 1.59 N (IQR, 1.11-1.85 N) to 0.33 N (IQR, 0.29-0.43 N; P < .001) for the left common carotid artery; and 0.84 N (IQR, 0.47-1.08 N) to 0.10 N (IQR, 0.07-0.17 N; P < .001) for the left subclavian artery. Robotic navigation resulted in significant reductions for the mean and maximum forces for each procedural phase. Significant improvements were also seen in other metrics, particularly at the target vessel ostium and for the more anatomically challenging procedural phases. Force reductions using robotic technology were evident for both novice and expert groups. CONCLUSIONS: Robotic navigation can potentially reduce CF and catheter-tissue contact points in an in vitro model, by enhancing catheter stability and control during endovascular manipulation.
Subject(s)
Aorta, Thoracic/surgery , Catheterization, Peripheral/instrumentation , Embolism/prevention & control , Endovascular Procedures/instrumentation , Robotic Surgical Procedures/instrumentation , Stroke/prevention & control , Vascular Access Devices , Aorta, Thoracic/abnormalities , Aorta, Thoracic/physiopathology , Catheterization, Peripheral/adverse effects , Clinical Competence , Embolism/etiology , Embolism/physiopathology , Endovascular Procedures/adverse effects , Equipment Design , Humans , Models, Anatomic , Motor Skills , Risk Factors , Robotic Surgical Procedures/adverse effects , Stress, Mechanical , Stroke/etiology , Stroke/physiopathology , Task Performance and Analysis , Time Factors , TorqueABSTRACT
Endovascular technologies are rapidly evolving, often requiring coordination and cooperation between clinicians and technicians from diverse specialties. These multidisciplinary interactions lead to challenges that are reflected in the high rate of errors occurring during endovascular procedures. Endovascular virtual reality (VR) simulation has evolved from simple benchtop devices to full physic simulators with advanced haptics and dynamic imaging and physiological controls. The latest developments in this field include the use of fully immersive simulated hybrid angiosuites to train whole endovascular teams in crisis resource management and novel technologies that enable practitioners to build VR simulations based on patient-specific anatomy. As our understanding of the skills, both technical and nontechnical, required for optimal endovascular performance improves, the requisite tools for objective assessment of these skills are being developed and will further enable the use of VR simulation in the training and assessment of endovascular interventionalists and their entire teams. Simulation training that allows deliberate practice without danger to patients may be key to bridging the gap between new endovascular technology and improved patient outcomes.
Subject(s)
Computer Simulation , Education, Medical, Continuing/methods , Education, Medical, Graduate/methods , Endovascular Procedures/education , Medical Errors/prevention & control , Models, Cardiovascular , Surgery, Computer-Assisted/education , Clinical Competence , Endovascular Procedures/adverse effects , Humans , Inservice Training , Interdisciplinary Communication , Learning Curve , Patient Care Team , Patient Safety , Risk Factors , Software , Surgery, Computer-Assisted/adverse effects , Treatment OutcomeABSTRACT
PURPOSE: This study evaluates a fully immersive simulated angiosuite for training and assessment of technical endovascular and human factor skills during a crisis scenario. MATERIALS AND METHODS: Virtual reality (VIST-C, Mentice) simulators were integrated into a simulated angiosuite (ORCAMP, Orzone). Teams, lead by experienced (N = 5) or trainee (N = 5) endovascular specialists, performed simulated endovascular ruptured aortic aneurysm repair (rEVAR). Timed performance metrics were recorded as surrogate measures of performance. Participants (N = 22) completed postprocedure questionnaires evaluating face validity, as well as technical and human factor aspects, of the simulation on a Likert scale from 1 (not at all) to 5 (very much). RESULTS: Experienced team leaders were significantly faster than trainees in obtaining proximal control with an intra-aortic occlusion balloon (352 vs. 501 s, p = 0.047) and all completed the procedure within the allotted time, whilst no trainee was able to do so. Total fluoroscopy times were significantly lower in the experienced group (782 vs. 1,086 s, p = 0.016). Realism of the simulated angiosuite was scored highly by experienced team leaders (median 4/5, IQR 4-5). Participants found the simulation useful for acquiring technical (4/5, IQR 4-5) and communication skills (4/5, IQR 4-5) and particularly valuable for enhancing teamwork (5/5, IQR 4-5) and patient safety (5/5, IQR 4-5). CONCLUSION: This study shows feasibility of creation of a crisis scenario in a fully immersive angiosuite simulation and team performance of a simulated rEVAR. Performance metrics differentiated between experienced specialists and trainees, and the realism of the simulation exercise and environment were rated highly by experienced endovascular specialists. This simulation has potential as a powerful training and assessment tool with opportunities to improve team performance in rEVAR through both technical and human factor skills training.
Subject(s)
Aortic Aneurysm, Abdominal/surgery , Aortic Rupture/surgery , Clinical Competence , Endovascular Procedures , Inservice Training , Patient Care Team/organization & administration , User-Computer Interface , Vascular Surgical Procedures/methods , Adult , Female , Fluoroscopy , Humans , Male , Middle Aged , Operative Time , Surveys and Questionnaires , Task Performance and AnalysisABSTRACT
Non-typhoidal Salmonella infections typically cause self-limiting gastroenteritis. However, extraintestinal focal infections, including mycotic aneurysms of the aorta, can also occur. We present the case of a 71-year-old man with chronic lymphocytic leukemia (CLL) and a large type V thoracoabdominal mycotic aneurysm infected with Salmonella enteritidis, complicated by thoracolumbar spondylodiscitis, paravertebral collections, and epidural abscess. This is the first report of Salmonella aortitis in the setting of CLL, and the unusual extent of local infective invasion seen here with Salmonella enteritidis infection raises a suspicion of CLL-related immunosuppression as a direct predisposing factor. This case illustrates the need to consider the possibility of an immune defect, even in CLL patients with normal leukocyte counts. The underlying mechanisms are unclear, but are likely to involve defects in cell-mediated immunity, thought to be of particular importance in invasive infections with intracellular pathogens such as Salmonella spp.
Subject(s)
Aneurysm, Infected/microbiology , Aortic Aneurysm, Thoracic/microbiology , Aortitis/microbiology , Leukemia, Lymphocytic, Chronic, B-Cell/complications , Salmonella Infections/microbiology , Salmonella enteritidis/isolation & purification , Aged , Aneurysm, Infected/diagnosis , Aneurysm, Infected/immunology , Aneurysm, Infected/therapy , Anti-Bacterial Agents/therapeutic use , Aortic Aneurysm, Thoracic/diagnosis , Aortic Aneurysm, Thoracic/immunology , Aortic Aneurysm, Thoracic/therapy , Aortitis/diagnosis , Aortitis/immunology , Aortitis/therapy , Aortography/methods , Blood Vessel Prosthesis Implantation , Debridement , Discitis/microbiology , Epidural Abscess/microbiology , Humans , Leukemia, Lymphocytic, Chronic, B-Cell/diagnosis , Leukemia, Lymphocytic, Chronic, B-Cell/immunology , Leukemia, Lymphocytic, Chronic, B-Cell/therapy , Magnetic Resonance Imaging , Male , Risk Factors , Salmonella Infections/diagnosis , Salmonella Infections/immunology , Salmonella Infections/therapy , Tomography, X-Ray ComputedABSTRACT
PURPOSE: To investigate the quality of stent-graft fenestrations created in vitro using different needle puncture and balloon dilation angles in different commercial endografts. METHODS: Fenestrations were made in a standardized fashion in 3 different endograft types: Talent monofilament twill woven polyester, Zenith multifilament tubular woven polyester, and Endofit thin-walled expanded polytetrafluoroethylene (PTFE). Punctures were made at 30°, 60°, and 90° angles using a 20-G needle and dilated using 6-mm standard and 7-mm cutting balloons; at least 6 fenestrations were made at each angle with standard balloons and at least 6 with cutting balloons. The 137 fenestrations were examined under light microscopy; quantitative and qualitative digital image analysis was performed to determine size, shape, and fenestration quality. RESULTS: PTFE grafts were easier to puncture/dilate, resulting in larger, elliptical fenestrations with overall better quality than the Dacron grafts; however, the puncture/dilation angle made an impact on the shape and quality of fenestrations. A significant number of fabric tears were observed in PTFE fabric at <90° puncture/dilation angles compared to Dacron grafts. In Dacron grafts, fenestration quality was significantly higher with 90° puncture/dilation angles (higher in Talent grafts). Cutting balloon use resulted in significantly more fabric tears and poor quality fenestrations in all graft types. CONCLUSION: Different endografts behave significantly differently when fenestrations are fashioned. Optimum puncture/dilation is important when considering in vivo fenestration techniques. Improvements in instrumentation, materials, and techniques are required to make this a reliable and reproducible endovascular option.
Subject(s)
Blood Vessel Prosthesis , Stents , Aorta/surgery , Materials Testing , Prosthesis Design , PuncturesABSTRACT
OBJECTIVE: Type B aortic dissection can be acutely complicated by rapid expansion, rupture, and malperfusion syndromes. Short-term adverse outcomes are associated with failure of the false lumen to thrombose. The reasons behind false lumen patency are poorly understood, and the objective of this pilot study was to use computational fluid dynamics reconstructions of aortic dissection cases to analyze the effect of aortic and primary tear morphology on flow characteristics and clinical outcomes in patients with acute type B dissections. METHODS: Three-dimensional patient-specific aortic dissection geometry was reconstructed from computed tomography scans of four patients presenting with acute type B aortic dissection and a further patient with sequential follow-up scans. The cases were selected based on their clinical presentation. Two were complicated by acute malperfusion that required emergency intervention. Three patients were uncomplicated and were managed conservatively. The patient-specific aortic models were used in computational simulations to assess the effect of aortic tear morphology on various parameters including flow, velocity, shear stress, and turbulence. RESULTS: Pulsatile flow simulation results showed that flow rate into the false lumen was dependent on both the size and position of the primary tear. Linear regression analysis demonstrated a significant relationship between percentage flow entering the false lumen and the size of the primary entry tear and an inverse relationship between false lumen flow and the site of the entry tear. Subjects complicated by malperfusion had larger-dimension entry tears than the uncomplicated cases (93% and 82% compared with 32% and 55%, respectively). Blood flow, wall shear stress, and turbulence levels varied significantly between subjects depending on aortic geometry. Highest wall shear stress (>7 Pa) was located at the tear edge, and progression of false lumen thrombosis was associated with prolonged particle residence times. CONCLUSIONS: Results obtained from this preliminary work suggest that aortic morphology and primary entry tear size and position exert significant effects on flow and other hemodynamic parameters in the dissected aorta in this preliminary work. Blood flow into the false lumen increases with increasing tear size and proximal location. Morphologic analysis coupled with computational fluid dynamic modeling may be useful in predicting acute type B dissection behavior allowing for selection of proper treatment modalities, and further confirmatory studies are warranted.
Subject(s)
Aorta/physiopathology , Aortic Aneurysm/physiopathology , Aortic Dissection/physiopathology , Computer Simulation , Hemodynamics , Models, Cardiovascular , Acute Disease , Adult , Aged , Aortic Dissection/complications , Aortic Dissection/diagnostic imaging , Aortic Dissection/therapy , Aortic Aneurysm/complications , Aortic Aneurysm/diagnostic imaging , Aortic Aneurysm/therapy , Aortography/methods , Biomechanical Phenomena , Blood Flow Velocity , Humans , Linear Models , Male , Middle Aged , Prognosis , Pulsatile Flow , Regional Blood Flow , Stress, Mechanical , Thrombosis/etiology , Thrombosis/physiopathology , Tomography, X-Ray Computed , Vascular PatencyABSTRACT
This report describes a patient with pseudoxanthoma elasticum (PXE) who presented with an incidental finding of a renal artery aneurysm. PXE is a rare genetic condition. It is associated with calcification of elastin fibers and is characterized by skin, eye, and cardiovascular complications. Our patient was previously treated for retinal and gastrointestinal hemorrhage and coronary artery disease, and is under surveillance for cerebral aneurysms. Five reports in the published literature have described aneurysms in patients with PXE, but, to our knowledge, this is the first report of a patient with PXE and renal artery aneurysm. The literature on PXE and aneurysms is reviewed.
Subject(s)
Aneurysm/etiology , Pseudoxanthoma Elasticum/complications , Renal Artery , Anastomosis, Surgical , Aneurysm/diagnosis , Aneurysm/pathology , Aneurysm/therapy , Biopsy , Embolization, Therapeutic , Endovascular Procedures/instrumentation , Female , Humans , Incidental Findings , Magnetic Resonance Angiography , Middle Aged , Pseudoxanthoma Elasticum/diagnosis , Pseudoxanthoma Elasticum/genetics , Renal Artery/pathology , Renal Artery/surgery , Stents , Treatment OutcomeABSTRACT
PURPOSE: To assess the incidence of errors before and after implementation of a structured mental rehearsal prior to the endovascular phase of combined open/endovascular arterial procedures. METHODS: Over 6 weeks, 15 combined open/endovascular procedures (7 abdominal aorta and 8 thoracic aorta) lasting 58 hours were evaluated by a trained observer. In a blinded fashion, 2 individuals scrutinized event logs for errors, which were categorized by type, by potential to cause patient harm (danger), and by potential to disrupt the procedure (delay). After 9 procedures, a focus group-devised structured mental rehearsal was implemented prior to the endovascular phase for 6 combined procedures. Error patterns were compared before and after implementation. Data are expressed as median (range). RESULTS: The error rate during the endovascular phase of the combined procedures was higher than the non-endovascular phase [7.64/hour (1.71-9.6) vs. 3.75/hour (1.71-5.54), respectively; pâ=â0.05]. Error rates during the endovascular phase were lower after the intervention compared to before [2.5/hour (1.4-6.0) vs. 7.6/hour (1.7-9.6), respectively; pâ=â0.05]. During the endovascular phase, danger and delay scores were also lower after the intervention [1.2/error (1.0-2.0) and 1.3/error (1.0-2.3), respectively] compared to before [1.75/error (1.4-2.5) and 2.0/error (1.3-2.5), respectively] (pâ=â0.036 and pâ=â0.036 for danger and delay, respectively). CONCLUSION: A structured mental rehearsal before critical stages of procedures may reduce the rate and severity of intraoperative error.
Subject(s)
Aorta, Abdominal/surgery , Aorta, Thoracic/surgery , Aortic Diseases/surgery , Blood Vessel Prosthesis Implantation/adverse effects , Clinical Competence , Endovascular Procedures/adverse effects , Medical Errors/prevention & control , Mental Processes , Postoperative Complications/prevention & control , Checklist , Cooperative Behavior , Focus Groups , Humans , Imagination , London , Motor Skills , Patient Care Team , Patient Safety , Postoperative Complications/etiology , Time Factors , Treatment OutcomeABSTRACT
PURPOSE: To determine the type and frequency of errors during vascular interventional radiology (VIR) and design and implement an intervention to reduce error and improve efficiency in this setting. MATERIALS AND METHODS: Ethical guidance was sought from the Research Services Department at Imperial College London. Informed consent was not obtained. Field notes were recorded during 55 VIR procedures by a single observer. Two blinded assessors identified failures from field notes and categorized them into one or more errors by using a 22-part classification system. The potential to cause harm, disruption to procedural flow, and preventability of each failure was determined. A preprocedural team rehearsal (PPTR) was then designed and implemented to target frequent preventable potential failures. Thirty-three procedures were observed subsequently to determine the efficacy of the PPTR. Nonparametric statistical analysis was used to determine the effect of intervention on potential failure rates, potential to cause harm and procedural flow disruption scores (Mann-Whitney U test), and number of preventable failures (Fisher exact test). RESULTS: Before intervention, 1197 potential failures were recorded, of which 54.6% were preventable. A total of 2040 errors were deemed to have occurred to produce these failures. Planning error (19.7%), staff absence (16.2%), equipment unavailability (12.2%), communication error (11.2%), and lack of safety consciousness (6.1%) were the most frequent errors, accounting for 65.4% of the total. After intervention, 352 potential failures were recorded. Classification resulted in 477 errors. Preventable failures decreased from 54.6% to 27.3% (P < .001) with implementation of PPTR. Potential failure rates per hour decreased from 18.8 to 9.2 (P < .001), with no increase in potential to cause harm or procedural flow disruption per failure. CONCLUSION: Failures during VIR procedures are largely because of ineffective planning, communication error, and equipment difficulties, rather than a result of technical or patient-related issues. Many of these potential failures are preventable. A PPTR is an effective means of targeting frequent preventable failures, reducing procedural delays and improving patient safety.
Subject(s)
Medical Errors/prevention & control , Patient Care Team/organization & administration , Radiography, Interventional/methods , Vascular Diseases/diagnostic imaging , Vascular Diseases/therapy , Efficiency , Female , Humans , Male , Patient Safety , Statistics, Nonparametric , Time Factors , Treatment OutcomeABSTRACT
BACKGROUND: The aim of this paper is to review the potential role of endovascular interventions for young patients with lower-limb ischaemia. METHODS: A literature search was performed of PubMed and Medline databases using appropriate search terms and limits. Case reports, retrospective studies, and prospective studies evaluating treatment of lower-limb ischemia in patients aged <50 years were scrutinized. Articles published between 1966 and 2010 were included in this review. RESULTS: Premature atherosclerosis is likely to represent the commonest cause of lower-limb ischemia in patients aged <50 years, although the incidence of nonatherosclerotic causes such as popliteal entrapment syndrome, cystic adventitial disease, and arteritis in these patients is greater than in older patients. As with older patients, endovascular interventions may be beneficial for patients with symptoms secondary to atherosclerosis. At present, the perceived durability of open surgery may be more preferable to patients aged <50 years, but the development of new endovascular technology is challenging this view. Endovascular interventions such as catheter-directed thrombolysis have specific roles in the treatment of lower-limb ischemia due to nonatherosclerotic causes. CONCLUSION: The use of angioplasty and stenting procedures to treat young patients with lower-limb ischemia is increasing and has specific roles. However, many developmental causes and nonatherosclerotic conditions still require primary surgical correction.
Subject(s)
Disease Management , Endovascular Procedures/standards , Ischemia/therapy , Leg/blood supply , Practice Guidelines as Topic , Age Factors , Global Health , Humans , Incidence , Ischemia/epidemiology , Risk FactorsABSTRACT
OBJECTIVE: Conventional catheter instability and embolization risk limits the adoption of endovascular therapy in patients with challenging arch anatomy. This study investigated whether arch vessel cannulation can be enhanced by a remotely steerable robotic catheter system. METHODS: Seventeen clinicians with varying endovascular experience cannulated all arch vessels within two computed tomography-reconstructed pulsatile flow phantoms (bovine type I and type III aortic arches), under fluoroscopic guidance, using conventional and robotic techniques. Quantitative (catheterization times, catheter tip movements, vessel wall hits, catheter deflection) and qualitative metrics (Imperial College Complex Endovascular Cannulation Scoring Tool [IC3ST]) performance scores were compared. RESULTS: Robotic catheterization techniques resulted in a significant reduction in median carotid artery cannulation times and the median number of catheter tip movements for all vessels. Vessel wall contact with the aortic arch wall was reduced to a median of zero with robotic catheters. During stiff guidewire exchanges, robotic catheters maintained stability with zero deflection, independent of the distance the catheter was introduced into the carotid vessels. Overall IC3ST performance scores (interquartile range) were significantly improved using the robotic system: Type I arch score was 26/35 (20-30.8) vs 33/35 (31-34; P = .001), and type III arch score was 20.5/35 (16.5-28.5) vs 26.5/35 (23.5-28.8; P = .001). Low- and medium-volume interventionalists demonstrated an improvement in performance with robotic cannulation techniques. The high-volume intervention group did not show statistically significant improvement, but cannulation times, movements, and vessel wall hits were significantly reduced. CONCLUSION: Robotic technology has the potential to reduce the time, risk of embolization and catheter dislodgement, radiation exposure, and the manual skill required for carotid and arch vessel cannulation, while improving overall performance scores.
Subject(s)
Aorta, Thoracic , Carotid Artery, Common , Catheterization, Peripheral/instrumentation , Catheters , Endovascular Procedures/instrumentation , Robotics/instrumentation , Surgery, Computer-Assisted/instrumentation , Aorta, Thoracic/diagnostic imaging , Aortography/methods , Carotid Artery, Common/diagnostic imaging , Catheterization, Peripheral/adverse effects , Clinical Competence , Embolism/etiology , Embolism/prevention & control , Endovascular Procedures/adverse effects , Equipment Design , Humans , Materials Testing , Motor Skills , Phantoms, Imaging , Pulsatile Flow , Radiography, Interventional , Regional Blood Flow , Surgery, Computer-Assisted/adverse effects , Task Performance and Analysis , Time Factors , Tomography, X-Ray ComputedABSTRACT
The management of complex aortic pathologies remains a major challenge particularly in the emergency setting. Bespoke fenestrated and branch stent graft technology has shown encouraging short- and mid-term results in selected patients. Despite tremendous technological advances in this field however, factors such as the inherent delay in device manufacturing, anatomical and technical challenges, high degree of planning, and cost hinder the wider applications of minimally invasive endovascular therapy. In situ fenestration of aortic stent grafts is an attractive alternative that eliminates the need for preoperative custom tailoring with the potential to widen the therapeutic options available and to offer a bailout option after inadvertent side branch occlusion. This article summarizes the principles of this technique and discusses its current applications.
Subject(s)
Aorta, Thoracic/surgery , Aortic Diseases/surgery , Blood Vessel Prosthesis Implantation/instrumentation , Blood Vessel Prosthesis , Endovascular Procedures/instrumentation , Stents , Aorta, Thoracic/diagnostic imaging , Aortic Diseases/diagnostic imaging , Aortography , Blood Vessel Prosthesis Implantation/adverse effects , Endovascular Procedures/adverse effects , Humans , Patient Selection , Prosthesis Design , Treatment OutcomeABSTRACT
OBJECTIVE: The objective of this study is to examine contemporary management of primary mycotic aortic aneurysms in a single center. We have previously reported the management of mycotic aortic aneurysms in 15 patients between 1991 and 2001, and we hypothesized that management would change in the light of the evolution of endovascular aortic repair. METHODS: A review of a prospectively collected database (2002-2009) of all patients presenting with mycotic aneurysms. RESULTS: A total of 19 aneurysms were identified in 17 patients (12 men, 5 women) with a median age of 66.2 years (range, 49-82 years). All were symptomatic, and nine had contained rupture. There were five infrarenal, two juxtarenal, three Crawford type III, four type IV thoracoabdominal aortic aneurysms, and five descending thoracic aneurysms in the series. All thoracic aneurysms were excluded by thoracic endovascular aneurysm repair. Two patients underwent visceral hybrid endografting for type III thoracic aortic aneurysm; the third was treated with open repair. Four patients underwent open type IV repair. Two of the infrarenal aneurysms were treated with bifurcated endovascular aneurysm repair, and the other three and both juxtarenals with open repair with in situ reconstruction. There were three early (17.6%) and three late deaths (17.6%). The median follow-up was 30.5 months (range, 1-102 months). CONCLUSIONS: The results of the latest series show that open surgery is still required in many cases. The introduction of endovascular techniques in the exclusion of mycotic aneurysms can be accomplished with acceptable results, and endovascular treatment has increased the therapeutic options for a difficult condition.
Subject(s)
Aneurysm, Infected/surgery , Aortic Aneurysm/surgery , Aortic Rupture/surgery , Blood Vessel Prosthesis Implantation , Endovascular Procedures , Aged , Aged, 80 and over , Aneurysm, Infected/diagnostic imaging , Aneurysm, Infected/microbiology , Aneurysm, Infected/mortality , Aortic Aneurysm/diagnostic imaging , Aortic Aneurysm/microbiology , Aortic Aneurysm/mortality , Aortic Rupture/diagnostic imaging , Aortic Rupture/microbiology , Aortic Rupture/mortality , Aortography/methods , Blood Vessel Prosthesis Implantation/adverse effects , Blood Vessel Prosthesis Implantation/mortality , Databases as Topic , Endovascular Procedures/adverse effects , Endovascular Procedures/mortality , Female , Humans , London , Male , Middle Aged , Time Factors , Tomography, X-Ray Computed , Treatment OutcomeABSTRACT
Endovascular treatments are limited in cases of thoracic aortic aneurysms extending up or proximal to the origin of the left subclavian artery (LSCA). In such cases, the LSCA is usually either occluded or revascularised. We report our first experience of four patients who underwent thoracic aneursym treatment with new custom-made grafts with a scallop in situ for the LSCA. The graft is tailor made per case, and a re-enforced scallop is positioned proximally allowing for the stent to be deployed beyond the origin of the LSCA; the origin of the LSCA remains patent, thus negating the need for revascularisation of the head and neck vessels on the left. The stent contains markers for identifying the scallop and are located along the midline to ensure correct alignment. All of the patients who underwent this procedure had technical success with flow through the LSCA both immediately after stent deployment and on follow-up imaging. This new stent has further expanded endovascular treatment options for patients with thoracic aneurysms extending up to and beyond the LSCA, which can play a part in improving outcome and decreasing mortality rates because surgery for revascularization will not be needed.
Subject(s)
Alloys , Angioplasty/methods , Aorta, Thoracic , Aortic Aneurysm, Thoracic/therapy , Aortography , Blood Vessel Prosthesis Implantation/methods , Blood Vessel Prosthesis , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Prosthesis Design , Stents , Tomography, X-Ray Computed , Aged , Aged, 80 and over , Aorta, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/diagnostic imaging , Female , Humans , Incidental Findings , Male , Middle Aged , Prosthesis Fitting , Subclavian Artery/diagnostic imagingABSTRACT
BACKGROUND: Adoption of residents' working time restrictions potentially undermines surgical training by reduction of operating room exposure. Simulation has been proposed as a way to acquire necessary skills in a laboratory environment but remains difficult to incorporate into training schedules. This study assessed whether residents working successive nights could acquire endovascular skills similar to colleagues working day shifts. METHODS: This prospective observational cohort study recruited 20 junior residents, divided into day shift and night shift groups by their respective call schedule. After initial cognitive skills training, a validated renal artery stent module on an endovascular simulator was completed over a series of seven sequential shifts during 1 week. The primary outcome measure was serial technical skill assessments. Secondary measures comprised assessments of activity, cognitive performance, introspective fatigue, quality, and quantity of preceding sleep. RESULTS: Both groups demonstrated significant learning curves for total time at the first session median vs seventh session median (181 vs 564 seconds [P < .001]; night, 1399 vs 572 [P < .001]), fluoroscopy time (day, 702 vs 308 seconds, [P < .001]; night, 669 vs 313 [P < .001]), and contrast volume (day, 29 vs 13 mL [P < .001]; night, 40 vs 16 [P < .001]). Residents working day shifts reached plateau 1 day earlier in the above measures vs those on night duty. The night shift group walked more steps (P < .001), reviewed more patients (P < .001), performed worse on all cognitive assessments (P < .05), slept less (P < .05), had poorer quality of sleep (P = .001), and was more fatigued (P < .001) than the day shift group. Acquired skill was retained a week after completion of shifts. CONCLUSION: Technical skills training after night shift work enables acquisition of endovascular technical skills, although it takes longer than after day shift training. This study provides evidence for program directors to organize simulation-based training schedules for residents on night shift rotations.
Subject(s)
After-Hours Care , Computer Simulation , Computer-Assisted Instruction , Education, Medical, Graduate/methods , Endovascular Procedures/education , Internship and Residency , Personnel Staffing and Scheduling , Renal Artery Obstruction/therapy , Workload , Adult , Clinical Competence , Cognition , Curriculum , Endovascular Procedures/instrumentation , Fatigue/psychology , Female , Humans , Male , Motor Skills , Neuropsychological Tests , Prospective Studies , Sleep , Stents , Surveys and Questionnaires , Task Performance and Analysis , Time Factors , Video Recording , Young AdultABSTRACT
BACKGROUND: Emerging robotic technologies are increasingly being used by surgical disciplines to facilitate and improve performance of minimally invasive surgery. Robot-assisted intervention has recently been introduced into the field of vascular surgery to potentially enhance laparoscopic vascular and endovascular capabilities. The objective of this study was to review the current status of clinical robotic applications in vascular surgery. METHODS: A systematic literature search was performed in order to identify all published clinical studies related to robotic implementation in vascular intervention. Web-based search engines were searched using the keywords "surgical robotics," "robotic surgery," "robotics," "computer assisted surgery," and "vascular surgery" or "endovascular" for articles published between January 1990 and November 2009. An evaluation and critical overview of these studies is reported. In addition, an analysis and discussion of supporting evidence for robotic computer-enhanced telemanipulation systems in relation to their applications in laparoscopic vascular and endovascular surgery was undertaken. RESULTS: Seventeen articles reporting on clinical applications of robotics in laparoscopic vascular and endovascular surgery were detected. They were either case reports or retrospective patient series and prospective studies reporting laparoscopic vascular and endovascular treatments for patients using robotic technology. Minimal comparative clinical evidence to evaluate the advantages of robot-assisted vascular procedures was identified. Robot-assisted laparoscopic aortic procedures have been reported by several studies with satisfactory results. Furthermore, the use of robotic technology as a sole modality for abdominal aortic aneurysm repair and expansion of its applications to splenic and renal artery aneurysm reconstruction have been described. Robotically steerable endovascular catheter systems have potential advantages over conventional catheterization systems. Promising results from applications in cardiac interventions and preclinical studies have urged their use in vascular surgery. Although successful applications in endovascular repair of abdominal aortic aneurysm and lower extremity arterial disease have been reported, published clinical experience with the endovascular robot is limited. CONCLUSIONS: Robotic technology may enhance vascular surgical techniques given preclinical evidence and early clinical reports. Further clinical studies are required to quantify its advantages over conventional treatments and define its role in vascular and endovascular surgery.
Subject(s)
Endovascular Procedures , Laparoscopy , Robotics , Surgery, Computer-Assisted , Vascular Surgical Procedures , Animals , Clinical Competence , Endovascular Procedures/adverse effects , Endovascular Procedures/instrumentation , Equipment Design , Evidence-Based Medicine , Humans , Laparoscopy/adverse effects , Laparoscopy/instrumentation , Motor Skills , Surgery, Computer-Assisted/adverse effects , Surgery, Computer-Assisted/instrumentation , Treatment Outcome , Vascular Surgical Procedures/adverse effects , Vascular Surgical Procedures/instrumentationABSTRACT
The past 4 decades have witnessed tremendous strides in the evolution of endovascular technology with increased operator experience, greater availability of more sophisticated and versatile endovascular devices, and advances in imaging modalities. In an attempt to limit the physiologic derangements associated with aortic crossclamping and extensive tissue dissection during traditional open surgical repair of extensive thoracoabdominal aortic aneurysms, less invasive strategies have been explored using endovascular technology: hybrid approaches and solely endovascular techniques. This article describes these techniques and their advantages, their current role in thoracoabdominal aortic aneurysm repair and potential future developments in this field.
Subject(s)
Aortic Aneurysm, Thoracic/surgery , Blood Vessel Prosthesis Implantation , Endovascular Procedures , Blood Vessel Prosthesis Implantation/adverse effects , Combined Modality Therapy , Endovascular Procedures/adverse effects , Humans , Patient Selection , Risk Assessment , Treatment OutcomeABSTRACT
OBJECTIVE: Fenestrated stent grafting has allowed the treatment of complex thoraco-abdominal aneurysm disease via a totally endovascular approach, but the procedure can be technically challenging and time consuming. We investigated whether this procedure may be enhanced by remotely steerable robotic endovascular catheters. METHODS: A four-vessel fenestrated stent graft partially deployed within a computed tomography (CT)-reconstructed pulsatile thoraco-abdominal aneurysm silicon model was used. Fifteen operators were recruited to participate in the study and divided into three groups, based on their endovascular experience: group A (n = 4, 100-200 endovascular procedures, group B (n = 5, 200-300), and group C (n = 6, >300). All operators were asked to cannulate the renal and visceral vessels under fluoroscopic guidance, using conventional and robotic techniques. Quantitative (catheterization times and wire/catheter tip movements) and qualitative metrics (procedure-specific-rating scale [IC3ST]), which grades operators on catheter use, instrumentation, successful cannulation/catheterization, and overall performance were compared. RESULTS: Median procedure time for cannulation of all four vessels was reduced using the robotic system (2.87 min, interquartile range [IQR; 2.20-3.90] versus 17.24 min [11.90-19.80]; P < .001) for each individual operator, regardless of the level of endovascular experience. The total number of wire/catheter movements taken to complete the task was also significantly reduced (38, IQR [29-57] versus 454 [283-687]; P < .001). There were significant differences in time and movement for cannulation of each individual vessel in the phantom. Robotic catheter operator radiation exposure was negligible as the robotic workstation is remote and away from the radiation source. Overall performance scores significantly improved using the robotic system, despite minimal operator exposure to this technology (IC3ST score 29/35, IQR [22.8-30.7] versus 19/35 [13-24.3]; P = .002). Each group of operators demonstrated an improvement in performance with robotic cannulation. For group A, median IC3ST score was 28/35, IQR (22-33) versus 15/35 (11-20); P = .04; for group B, 30/35 (27-31) versus 19/35 (18-24); P = .07; and for group C, 28.8/35 (28.5-29) versus 22/35 (16-24); P = .06. For groups B and C, these differences did not reach statistical significance. CONCLUSION: Robotic catheterization of target vessels during this procedure is feasible and minimizes radiation exposure for the operator. Steerable robotic catheters with intuitive control may overcome some of the limitations of standard catheter technology, enhance target vessel cannulation, reduce instrumentation, and improve overall performance scores.
Subject(s)
Aortic Aneurysm, Thoracic/surgery , Blood Vessel Prosthesis Implantation/instrumentation , Blood Vessel Prosthesis , Catheterization, Peripheral/instrumentation , Clinical Competence , Robotics/instrumentation , Stents , Surgery, Computer-Assisted/instrumentation , Aortic Aneurysm, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/physiopathology , Aortography/methods , Blood Vessel Prosthesis Implantation/methods , Equipment Design , Feasibility Studies , Humans , Models, Cardiovascular , Occupational Exposure , Phantoms, Imaging , Prosthesis Design , Psychomotor Performance , Pulsatile Flow , Radiation Dosage , Radiography, Interventional , Surgery, Computer-Assisted/methods , Task Performance and Analysis , Time Factors , Tomography, X-Ray ComputedABSTRACT
OBJECTIVES: This study evaluated virtual reality (VR) simulation for endovascular training of medical students to determine whether innate perceptual, visuospatial, and psychomotor aptitude (VSA) can predict initial and plateau phase of technical endovascular skills acquisition. METHODS: Twenty medical students received didactic and endovascular training on a commercially available VR simulator. Each student treated a series of 10 identical noncomplex renal artery stenoses endovascularly. The simulator recorded performance data instantly and objectively. An experienced interventionalist rated the performance at the initial and final sessions using generic (out of 40) and procedure-specific (out of 30) rating scales. VSA were tested with fine motor dexterity (FMD, Perdue Pegboard), psychomotor ability (minimally invasive virtual reality surgical trainer [MIST-VR]), image recall (Rey-Osterrieth), and organizational aptitude (map-planning). VSA performance scores were correlated with the assessment parameters of endovascular skills at commencement and completion of training. RESULTS: Medical students exhibited statistically significant learning curves from the initial to the plateau performance for contrast usage (medians, 28 vs 17 mL, P < .001), total procedure time (2120 vs 867 seconds, P < .001), and fluoroscopy time (993 vs. 507 seconds, P < .001). Scores on generic and procedure-specific rating scales improved significantly (10 vs 25, P < .001; 8 vs 17 P < .001). Significant correlations were noted for FMD with initial and plateau sessions for fluoroscopy time (r(s) = -0.564, P = .010; r(s) = -.449, P = .047). FMD correlated with procedure-specific scores at the initial session (r(s) = .607, P = .006). Image recall correlated with generic skills at the end of training (r(s) = .587, P = .006). CONCLUSIONS: Simulator-based training in endovascular skills improved performance in medical students. There were significant correlations between initial endovascular skill and fine motor dexterity as well as with image recall at end of the training period. In addition to current recruitment strategies, VSA may be a useful tool for predictive validity studies.