ABSTRACT
Objetivou-se com esse trabalho avaliar se há diferença na quantidade de perda de esmalte durante a remoção do compósito remanescente após a descolagem do braquete, utilizando a broca de carboneto nº 1171 em baixa e em alta rotação. Foram empregados 40 incisivos bovinos com braquetes metálicos colados com compósito em suas respectivas superfícies vestibulares. Os dentes foram divididos em 2 grupos de 20 dentes cada, de acordo com a rotação da broca utilizada para a remoção do compósito remanescente. A superfície de esmalte foi quantificada antes da colagem e após a descolagem e polimento final. Houve uma perda média de esmalte de 29,4 micrômetros no grupo que utilizou a broca em baixa rotação e de 37 micrômetros no grupo que utilizou a broca em alta rotação, sendo a diferença estatisticamente significante em nível de 1%. Concluiu-se que o uso da broca de carboneto de tungstênio nº 1171 em baixa rotação, na remoção do compósito remanescente, foi o método que acarretou menos danos à superfície de esmalte após a remoção do compósito.
Subject(s)
Cattle , Orthodontic Brackets , Dental Debonding/methods , Dental Enamel , Dental Instruments/standardsABSTRACT
OBJECTIVE: To evaluate the influence of enamel etching on tensile bond strength of orthodontic brackets bonded with resin-reinforced glass ionomer cement. MATERIALS AND METHODS: The sample group consisted of 15 patients who had indications for extraction of four premolars for orthodontic reasons, equally divided into two different groups according to bracket and enamel preparation. Brackets were bonded in vivo, by the same operator, using a split mouth random technique: Group 1 (control), phosphoric acid + Fuji Ortho LC; Group 2, Fuji Ortho LC without acid conditioning. The teeth were extracted after 4 weeks using elevators. An Instron Universal Testing Machine was used to apply a tensile force directly to the enamel-bracket interface at a speed of 0.5 mm/min. The groups were compared using a Mann-Whitney U-test and Weibull analysis. RESULTS: Mean results and standard deviations (in MPa) for the groups were: Group 1, 6.26 (3.21), Group 2, 6.52 (2.73). No significant difference was observed in the bond strengths of the two groups evaluated (P = .599). CONCLUSIONS: Fuji Ortho LC showed adequate shear bond strength and may be suitable for clinical use.
Subject(s)
Acid Etching, Dental , Acrylic Resins , Aluminum Silicates , Glass Ionomer Cements , Orthodontic Brackets , Dental Bonding/methods , Dental Debonding , Dental Enamel/drug effects , Dental Stress Analysis , Glass Ionomer Cements/chemistry , Humans , Materials Testing , Phosphoric Acids/pharmacology , Statistics, Nonparametric , Survival Analysis , Tensile StrengthABSTRACT
This work evaluated the remineralization of demineralized enamel of pits and fissures of human third molars sealed with a glass ionomer cement (Fuji IX, GC Corporation--Japan) or with a Bis-GMA sealant (Delton--Dentsply). Ten volunteers participated in this in situ study that consisted of two thirty-day periods using intra-oral devices, with a weeks interval in between. Four experimental treatment procedures and one control were randomly assigned to the volunteers specimens: Group I, no treatment, control; Group II, artificial caries process; Group III, same treatment as Group II, but sealed with Delton (Dentsply); Group IV, same treatment as Group II, but sealed with Fuji IX (GC Corporation--Japan); Group V, same treatment as Group II and no sealing. Groups I and II were not submitted to the oral environment and served as controls. After a period of 30 days in the oral environment, the specimens were removed from the devices, embedded in acrylic resin, ground flat and polished. Then, Knoop hardness tests were performed, with a 25 g static load applied for 15 seconds. The measurements were made from the base of the fissure up to an opening of 600 microm, pre-established between the inclines of the cusps. Three indentations were then made, located at 25, 75, and 125 microm in depth from the outer enamel margin and 100 microm apart from each other (Micromet 2003). The Brieger F and Bonferronis tests were applied to the measurements. It was concluded that sealing with the glass ionomer cement Fuji IX was capable of making the enamel of pits and fissures more resistant by increasing the value of Knoop hardness.
Subject(s)
Bisphenol A-Glycidyl Methacrylate/pharmacology , Dental Caries/drug therapy , Dental Enamel/drug effects , Glass Ionomer Cements/pharmacology , Pit and Fissure Sealants/pharmacology , Tooth Remineralization/methods , Bisphenol A-Glycidyl Methacrylate/therapeutic use , Case-Control Studies , Dental Restoration, Permanent , Glass Ionomer Cements/therapeutic use , Hardness Tests , Humans , Pit and Fissure Sealants/therapeutic useABSTRACT
Esta pesquisa avaliou a remineralização do esmalte de fóssulas e fissuras de terceiros molares humanos previamente desmineralizados e selados com um cimento de ionômero de vidro (Fuji IX, GC Corporation - Japão) ou com um selante de Bis-GMA (Delton-Dentsply). Dez voluntários participaram deste estudo in situ que consistiu de dois períodos de 30 dias com intervalo de 1 semana entre eles, usando dispositivos intra-orais. Quatro procedimentos de tratamento experimental e um controle foram aleatoriamente distribuídos entre os espécimes que foram usados pelos voluntários: Grupo I, sem qualquer tratamento, controle; Grupo II, processo de cárie artificial; Grupo III, igual ao Grupo II, porém selados com Delton (Dentsply); Grupo IV, igual ao Grupo II, porém selados com Fuji IX (GC Corporation - Japão); Grupo V, igual ao Grupo II, mas sem selamento. Os Grupos I e II não foram submetidos ao meio bucal e serviram de controle. Após um período de trinta dias no meio bucal, os espécimes foram removidos dos dispositivos, montados em resina acrílica, planificados e polidos. Realizaram-se então testes de Dureza Knoop com carga estática de 25 g por 15 segundos. As medidas foram realizadas desde a base da fissura até uma abertura de 600 µm, preestabelecida entre os planos inclinados das cúspides. A cada 100 µm, três penetrações foram realizadas: a primeira a 25 µm da superfície da fissura, a segunda a 75 µm, e a terceira a 125 µm (Micromet 2003). Os dados obtidos foram analisados estatisticamente pelos testes "F" de Brieger e de Bonferroni. Concluiu-se que o selamento com o cimento de ionômero de vidro Fuji IX foi capaz de tornar o esmalte de sulcos e fissuras mais resistente pelo aumento do valor de dureza Knoop.
Subject(s)
Humans , Bisphenol A-Glycidyl Methacrylate/pharmacology , Dental Caries/drug therapy , Dental Enamel/drug effects , Glass Ionomer Cements/pharmacology , Pit and Fissure Sealants/pharmacology , Tooth Remineralization/methods , Bisphenol A-Glycidyl Methacrylate/therapeutic use , Case-Control Studies , Dental Restoration, Permanent , Glass Ionomer Cements/therapeutic use , Hardness Tests , Pit and Fissure Sealants/therapeutic useABSTRACT
O propósito deste estudo in vitro foi determinar a influência do agente clareador peróxido de carbamida a 10% na resistência mecânica da colagem de braquetes ortodônticos. Foram estudados três grupos denominados GI (não submetido ao clareamento), G2 (com clareamento e colagem realizada 1 semana após) e G3 (com clareamento e colagem realizada 24h após). O teste de cisalhamento foi conduzido na máquina de ensaios mecânicos Emic, com a velocidade de deformação de 0,5 mm/min. A resistência ao cisalhamento em relação à área de colagem foi calculada para cada dente e expressa em MPa. Os resultados mostraram aumento estatisticamente significante (p<0,001) da resistência mecânica da colagem após clareamento.
Subject(s)
In Vitro Techniques , Orthodontic Brackets , Tooth BleachingABSTRACT
The TiF4 application produces a titanium coating on enamel surface, reducing solubility in presence of cariogenic challenge. However, it is not established if this titanium also penetrates inside the enamel. The aim of this study was to evaluate in vitro the presence of this superficial coat and titanium penetration into human sound and decayed enamel after TiF4 application. Twenty-four unerupted third molars were mesiodistally cut and divided into two groups (GA--sound and GB--artificial decayed). After a 4% TiF4 application, each sample was fractured longitudinally (occlusal-cervical). Through microprobe analysis with energy dispersive spectrometer (EDS), titanium penetration could be observed inside the enamel. The McNemar test (p=0.267) showed that there was no difference between the groups analyzed regarding to titanium penetration, although in group A the titanium penetrated more deeply (Wilcoxon test, p=0.047). It could be concluded that there was no difference between the groups regarding the titanium penetration, but titanium penetrated more deeply into sound enamel compared to artificially decayed enamel.
Subject(s)
Cariostatic Agents/pharmacology , Cariostatic Agents/pharmacokinetics , Dental Caries/metabolism , Dental Enamel/metabolism , Fluorides/pharmacology , Fluorides/pharmacokinetics , Titanium/pharmacology , Titanium/pharmacokinetics , Chi-Square Distribution , Dental Enamel Solubility/drug effects , Humans , Molar , Statistics, NonparametricABSTRACT
O objetivo deste artigo é revisar a literatura no intuito de esclarecer os avanços nos materiais utilizados na colagem direta de acessórios aos dentes, apresentando as vantagens e desvantagens dos mais tradicionais até os atuais, discutindo suas aplicações clínicas
Subject(s)
Glass Ionomer Cements/standards , Dental Bonding , Tooth Movement Techniques/standards , Orthodontic Brackets , Composite Resins/standardsABSTRACT
Using high-performance liquid chromatography (HPLC), small amounts of liquid samples in which 25 premolar human teeth were immersed were evaluated. Each tooth was immersed separately in 800-ml flasks with distilled ultra-pure deionized water and remained there for 1678 h after the filling of their canals with Ca(OH)2 associated with different vehicles: group 1: polyethylene glycol and colophon (Calen); group 2: glycerin and camphorated paramonochlorophenol; group 3: camphorated paramonochlorophenol; group 4: glycerin and tricresol formol; and group 5: anesthetic solution (Citanest). Five polyethylene tubes were filled with each of these pastes and placed unsealed in similar flasks. At the end of this period, HPLC analyses of the aqueous medium related to each group were performed to detect other substances that had diffused from the pastes used in the canals of the teeth other than calcium and hydroxyl ions. Although the groups presented different maximum peaks when there was no barrier, they all showed higher values than when the tooth was present. At least 15 substances other than Ca2+ and OH- were detected in the aqueous medium of group 4. Analyzing the HPLC graphs, we concluded that not only Ca2+ and OH-, but also a considerable quantity of other components of the pastes diffused through the dentine and reached the external root surface.
Subject(s)
Calcium Hydroxide/chemistry , Pharmaceutical Vehicles/chemistry , Root Canal Filling Materials/chemistry , Anesthetics, Local/chemistry , Calcium Hydroxide/analysis , Camphor/chemistry , Chlorophenols/chemistry , Chromatography, High Pressure Liquid , Cresols/chemistry , Dentin Permeability , Diffusion , Disinfectants/chemistry , Drug Combinations , Formaldehyde/chemistry , Glycerol/chemistry , Humans , Pharmaceutical Vehicles/analysis , Polyethylene Glycols/chemistry , Prilocaine/chemistry , Root Canal Filling Materials/analysis , Solvents/chemistry , Water/chemistryABSTRACT
This investigation measured the diffusion of Ca2+ through dentin by using Ca(OH)2 associated with various vehicles. After mechanical preparation and removal of smear layer, 41 human premolar teeth were stored individually in flasks containing 800 ml of ultra-pure deionized water for 2855 h. The Ca2+ concentration was measured by atomic absorption spectrophotometry as a function of time. These measurements were divided into two phases: dissolution, to check the loss of Ca2+ from the tooth structure itself, for which all canals were kept empty and open in the absence of medication for 1168 h, and diffusion, in which the specimens were divided into 10 groups (3 control groups: group 1 = water control, group 2 = sealing control, and group 3 = open canal dissolution control; 7 experimental groups in which the whose canals were filled with Ca(OH)2 paste associated with the following vehicles: group 4 = saline; group 5 = polyethylene glycol (Calen); group 6 = glycerin and camphorated parachlorophenol group 7 = camphorated paramonochlorophenol; group 8 = glycerin; group 9 = glycerin and tricresol formaldehyde (TCF); and group 10 = anesthetic solution. This phase lasted 1687 h. A total of 1058 measurements of Ca2+ were made. Regression analysis was used for statistical evaluation. We concluded that diffusion occurred differently for each group: the medications used in the root canals interacted with the dentinal structure or among themselves; the medication coated the dentinal tubule, facilitating the diffusion of Ca2+ into the external part of the root.
Subject(s)
Calcium Hydroxide/pharmacokinetics , Calcium/pharmacokinetics , Dentin/metabolism , Root Canal Filling Materials/pharmacokinetics , Anesthetics, Local , Calcium Hydroxide/administration & dosage , Camphor , Chlorophenols , Dentin Permeability , Diffusion , Drug Combinations , Glycerol , Humans , Pharmaceutical Vehicles , Prilocaine , Sodium ChlorideABSTRACT
The aim of the present survey was to evaluate the dentin thickness of buccal, lingual, mesial and distal surfaces of first and second primary molars. These evaluations were done at the middle third of the crowns of twenty extracted non-carious primary teeth separated in two groups (first molars and second molars). Comparisons were performed within-groups and between-groups. The mean values of dentin thickness observed for first molars were 2430 mm (buccal), 1.869 mm (lingual), 1.655 mm (mesial) and 1.664 mm (distal). For second molars the dentin thickness presented 3.006 mm (buccal), 2730 mm (lingual), 2130 mm (mesial) and 2192 mm (distal). The dentin thickness was higher in the buccal surface in both groups (P<0.05; Wilcoxon Test), except for the lingual surface of second molars (P>0.05). No differences were observed between mesial and distal surfaces in both groups (P>0.05). Comparisons between-groups showed that the dentin thickness was higher in all surfaces of second molars (P<0.01; Mann-Whitney Test). It was concluded that there are differences in the dentin thickness between first and second primary human molars and within the different surfaces of such teeth.
Subject(s)
Dentin/anatomy & histology , Molar/anatomy & histology , Tooth, Deciduous/anatomy & histology , Child , Humans , Reference Values , Statistics, NonparametricABSTRACT
- The pH values of the external aqueous medium, relative to the roots of 41 human premolar teeth filled with Ca(OH)2 in to several vehicles, were evaluated in the present study. After root canal biomechanical preparation and smear-layer removal, the teeth were stored individually, immersed in flasks containing 800 ml of ultra-pure deionized water for a period of 118 days. A pH meter was used to analyse the pH values as a function of time. The measurements were divided into phase 1: dissolution, in which all canals remained empty and open in the absence of medicament for 48 days, and phase 2: diffusion, in which the specimens were divided into 10 groups which consisted of three control groups: group 1, water control; group 2, sealing control; and group 3, opened canal dissolution control, and seven experimental groups, with five teeth each, whose canals were filled with Ca(OH)2 paste associated with the following vehicles: group 4, saline solution; group 5, polyethylene glycol (Calen); group 6, glycerin and parachlorophenol (PMCC); group 7, PMCC; group 8, glycerin; group 9, glycerin and formo cresol (FC); and group 10, anesthetic solution. This phase lasted for 70 days. A total of 1058 measurements of the pH values were made. Regression analysis was used for statistical evaluation. The results show that all groups containing polyol in the composition of the paste had a trend to acidification in the interval between filling and 14 days later (therapeutic period) and, at the end of the experiment (1687 h to 70 days after canal filling), the pH was slightly alkaline. We conclude that polyhydroxy alcohol (glycerin and polyethylene glycol, Calen) diffusion enhances acidification of the aqueous medium.
Subject(s)
Calcium Hydroxide/chemistry , Glycerol/chemistry , Root Canal Filling Materials/chemistry , Dentin Permeability , Diffusion , Humans , Hydrogen-Ion Concentration , Periodontal Ligament/chemistry , Pharmaceutical Vehicles/chemistry , Polyethylene Glycols/chemistry , Regression Analysis , Time Factors , Tooth Root/chemistryABSTRACT
Os objetivos do estudo foram comparar a resistência ao cisalhamento de três sistemas adesivos dentários, o Concise Ortodôntico, o Transbond XT e o Transbond Plus Self-Etching Primer (3M Unitek Dental Products), na colagem na face vestibular de pré-molares humanos e verificar a relaçäo dos materiais utilizados para colagem quanto ao Índice de Adesivo Remanescente (ARI). As médias e desvios-padräo do teste de resistência ao cisalhamento foram: Grupo A (Concise Ortodôntico): 20,35 (9,97) MPa; Grupo B (Transbond XT): 22,12 (9,89) MPa e Grupo C (Transbond Plus Self-Etching Primer): 27,07 (5,50) MPa. Näo foi encontrada diferença estatisticamente significativa na resistência de colagem entre os grupos avaliados (p<0,05), embora numericamente o Transbond Plus Self-Etching Primer apresentasse média mais elevada e menor desvio padräo, mostrando valores mais homogêneos. Com isso, em relaçäo ao teste aplicado, os materias pesquisados mostraram que satisfazem os requisitos clínicos quanto à força de adesäo para colagem em esmalte. Com relaçäo ao teste ARI, conclui-se que o Concise Ortodôntico é o material que teve o maior índice de remanescente adesivo, e o Transbond XT, o menor, mostrando que maior e menor quantidade de compósito ficou sobre a superfície do esmalte após a descolagem quando realizada com Concise Ortodôntico e Transbond XT, respectivamente. Sob a luz do microscópio ótico, näo foi observada qualquer fratura coesiva em esmalte após o teste de resistência ao cisalhamento
Subject(s)
Dental Bonding , Dentin-Bonding Agents , Bicuspid , Tensile StrengthABSTRACT
The aim of this research was to verify, in vitro, the effect of various porcelain surface treatment on the shear strength of orthodontic brackets bonded to porcelain and the mode of fracture after debonding. Eighty-eight samples of metallic supported feldspathic porcelain were randomly divided into four groups according to their surface preparation as follows: the porcelain was maintained intact (GI), roughened with a diamond bur (GII), etched with 10% hydrofluoric acid (GIII), or sandblasted with aluminum oxide (GIV). The specimens were treated with silane (Scotchprime) and brackets were bonded with Concise. Each sample was subjected to a shear load at a crosshead speed of 1 mm/min and a recording was made at the point of failure. Bond strengths, adequate to withstand the application of orthodontic forces, were achieved in all groups. The Kruskal-Wallis statistical test showed no significant differences in bond strength between the groups (p > 0.05). However, many more porcelain fractures occurred on deglazed porcelain. This study indicates that with the appropriate material selection, the silane/composite procedure alone may be adequate for bonding.
Subject(s)
Dental Bonding , Dental Porcelain , Orthodontic Brackets , Acid Etching, Dental , Aluminum Oxide , Bisphenol A-Glycidyl Methacrylate , Dental Debonding , Dental Stress Analysis , Diamond , Materials Testing , Random Allocation , Resin Cements , Shear Strength , Silanes , Silicates , Surface PropertiesABSTRACT
The aim of this study was to evaluate the influence of prophylaxis on the sealants microleakage in 30 premolars divided into: Group A, Group B and Group C. The teeth were analyzed using the optical microscope (OM) and at scanning electron microscope (SEM). There was a statistical significant difference among the groups regarding the presence of microleakage, but not with the presence of tags.
Subject(s)
Dental Leakage/classification , Dental Prophylaxis , Pit and Fissure Sealants/chemistry , Acid Etching, Dental , Bicuspid/ultrastructure , Bisphenol A-Glycidyl Methacrylate/chemistry , Chi-Square Distribution , Dental Bonding , Dental Prophylaxis/instrumentation , Dental Prophylaxis/methods , Humans , Microscopy, Electron, Scanning , Polyurethanes/chemistry , Rubber , Silicates , Silver Staining , Sodium Bicarbonate , Statistics as Topic , Therapeutic Irrigation , WaterABSTRACT
The aim of the present survey was to evaluate tubule density and diameter of dentin of first and second primary human molars and compare the two dental categories. These evaluations were done solely at the middle third of the crowns of twenty extracted noncarious teeth separated in two groups (first molars and second molars). The tubule diameters observed were 0. 794 microm and 1.0 microm for first and second molars, respectively (measurements done at 35-65% from the pulp-chamber walls). Regarding tubular density, the measurements indicated 17,997.594 tubules/mm2 and 25,211.317 tubules/mm2 for first and second molars, respectively. Comparisons between-groups indicated that tubule diameter and density of dentin were higher in second molars, being the difference highly significant (P<0.01).
Subject(s)
Dentin/ultrastructure , Molar/ultrastructure , Tooth, Deciduous/ultrastructure , Child , Dental Pulp Cavity/ultrastructure , Humans , Microscopy, Electron, Scanning , Statistics, Nonparametric , Tooth Crown/ultrastructureABSTRACT
The aim of this research was to verify, in vitro, the effect of various porcelain surface treatments on the shear strength of orthodontic brackets bonded to porcelain and the mode of fracture after debonding. Eighty-eight samples of metallic supported feldspathic porcelain were randomly divided into four groups according to their surface preparation as follows: the porcelain was maintained intact (GI), roughened with a diamond bur (GII), etched with 10 percent hydrofluoric acid (GIII), or sandblasted with aluminum oxide (GIV). The specimens were treated with silane (Scothprime) and brackets were bonded with Concise. Each sample was subjected to a shear load at a crosshead speed of 1 mm/min and a recording was made at the point of failure. Bond strengths, adequate to withstand the application of orthodontic forces, were achieved in all groups. The Kruskal-Wallis statistical test showed no significant differences in bond strength between the groups (p>0.05). However, many more porcelain fractures occurred on deglazed porcelain. This study indicates that with the appropriate material selection, the silane/composite procedure alone may be adequate for bonding
Subject(s)
Dental Bonding , Dental Porcelain , In Vitro Techniques , Orthodontic Brackets , Dental Debonding , Dental Stress Analysis , Surface Properties , Tensile StrengthABSTRACT
O objetivo deste estudo é avaliar a fidelidade de reprodução de detalhes de moldagens realizadas com 12 marcas comerciais de hidrocolóide irreversível (alginato) a partir de um modelo metálico padrão (Especificação nº 18 da ANSI/ADA - 1992). Foi também analisada a reprodução dos detalhes no modelo de gesso pedra obtido. Os dados foram submetidos a análise estatística (Teste de Kruskal-Wallis) para expressar qual a melhor combinação alginato-gesso
Subject(s)
Alginates , Calcium Sulfate , In Vitro TechniquesABSTRACT
O objetivo deste trabalho foi avaliar a produção de fraturas verticais radiculares provocadas durante dois métodos de obturação: a técnica híbrida de Tagger modificada e a técnica da compactação vertical de Schilder. O uso de forças excessivas durante o tratamentode canais, principalmente durante a obturação pode provocar fraturas verticais radiculares. Quando ocorrem, as fraturas são um problema de importância clínica, pois representam um prognóstico ruim. Os resultados mostraram que ambas as técnicas obturadoras não foram capazes de produzir fraturas radiculares
Subject(s)
Humans , Male , Female , Dental Pulp Cavity/injuries , Gutta-Percha , Root Canal Obturation/adverse effects , Root Canal Obturation/methods , Tooth Fractures/etiology , Tooth Injuries/etiology , Dental Materials , Tooth Fractures/surgeryABSTRACT
Compósitos são utilizados atualmente para colagem em ortodontia. Contudo, diversos estudos relatam alterações de cor deste material. O objetivo deste artigo é alertar os ortodontistas para o risco de alteração de cor do dente devido a resíduos de compósito que ficam no esmalte dentário após a descolagem de bráquetes. É relatado um caso clínico de alteração de cor do esmalte dentário após a utilização do compósito da marca Alpha Plast©
Subject(s)
Humans , Female , Adolescent , Composite Resins/adverse effects , Dental Bonding , Dental DebondingABSTRACT
A evolução dos materiais dentários utilizados para colagem em Ortodontia vem facilitando os procedimentos nesta área. Entretanto, uma das dificuldades encontradas pelos ortodontistas é o controle da umidade no ato da colagem. Por este motivo, buscamos um material que tivesse adesão à estrutura dentária em meio úmido, compatível com as necessidades clínicas. O objetivo deste trabalho foi avaliar a resistência ao cisalhamento da colagem de estruturas metálicas (aço inoxidável 303 austenítico, de que são feitos os bráquetes da Morelli) em esmalte bovino utilizando o cimento resinoso Transbond XT, associado ou não ao Transbond MIP "primer" hidrófilo em presença ou não de umidade. Foram criados 3 grupos, sendo eles: A) Transbond XT (KIT), em meio seco; B)Transbond MIP "primer" hidrófilo aplicado no esmalte, em meio úmido; C)Transbond XT (KIT) + Transbond MIP "primer" hidrófilo aplicado no esmalte e primer/adesivo aplicado no metal, em meio úmido. Como resultado do teste de resistência ao cisalhamento, obtivemos como média (valores em Kgf/cm2): A) 56,31; B)97,63; C)44,12. Sendo assim, concluímos que o cimento resinoso Transbond XT, quando associado ao MIP "primer" hidrófilo em presença de umidade, tem aumentada sua resistência ao cisalhamento