Polystyrene Brush Evolution by Grafting to Reaction on Deglazed and Not-Deglazed Silicon Substrates.

Two model substrates for the grafting to reaction are considered: not-deglazed silicon, whose surface is coated by a thin oxide layer with reactive silanol groups on its surface; and deglazed silicon, where the oxide layer is removed by treatment with hydrofluoric acid. The reactive polymers are hydroxy-terminated polystyrenes with molecular weights ranging from 3.9 to 13.9 kg mol⁻1. The grafting to reaction is carried out at different temperatures and for different periods of time on the two different substrates. The thickness and the thermal stability of the resulting brushes are evaluated. Furthermore, the grafting of a highly dispersed system is simulated by blending two polymers with different molecular weights. Although the brush thickness growth is found to be faster on deglazed silicon, the preferential grafting of short chains occurs with equal chain selection propensity on both substrates.

Periodic Arrays of Dopants in Silicon by Ultralow Energy Implantation of Phosphorus Ions through a Block Copolymer Thin Film.

In this work, block copolymer lithography and ultralow energy ion implantation are combined to obtain nanovolumes with high concentrations of phosphorus atoms periodically disposed over a macroscopic area in a p-type silicon substrate. The high dose of implanted dopants grants a local amorphization of the silicon substrate. In this condition, phosphorus is activated by solid phase epitaxial regrowth (SPER) of the implanted region with a relatively low temperature thermal treatment preventing diffusion of phosphorus atoms and preserving their spatial localization. Surface morphology of the sample (AFM, SEM), crystallinity of the silicon substrate (UV Raman), and position of the phosphorus atoms (STEM- EDX, ToF-SIMS) are monitored during the process. Electrostatic potential (KPFM) and the conductivity (C-AFM) maps of the sample surface upon dopant activation are compatible with simulated I-V characteristics, suggesting the presence of an array of not ideal but working p-n nanojunctions. The proposed approach paves the way for further investigations on the possibility to modulate the dopant distribution within a silicon substrate at the nanoscale by changing the characteristic dimension of the self-assembled BCP film.

Microplastic contamination of supraglacial debris differs among glaciers with different anthropic pressures.

Microplastic (MP) contamination is ubiquitous and widespread in terrestrial and aquatic ecosystems, including remote areas. However, information on the presence and distribution of MPs in high-mountain ecosystems, including glaciers, is still limited. The present study aimed at investigating presence, spatial distribution, and patterns of contamination of MPs on three glaciers of the Ortles-Cevedale massif (Central Alps, Northern Italy) with different anthropic pressures, i.e., the Forni, Cedec and Ebenferner-Vedretta Piana glaciers. Samples of supraglacial debris were randomly collected from the glaciers and MPs were isolated. The mean amount (±SE) of MPs measured in debris from Forni, Cedec and Ebenferner-Vedretta Piana glaciers was 0.033 ± 0.007, 0.025 ± 0.009, and 0.265 ± 0.027 MPs g-1 dry weight, respectively. The level and pattern of MP contamination from the Ebenferner-Vedretta Piana glacier were significantly different from those of the other glaciers. No significant spatial gradient in MP distribution along the ablation areas of the glaciers was observed, suggesting that MPs do not accumulate toward the glacier snout. Our results confirmed that local contamination can represent a relevant source of MPs in glacier ecosystems experiencing high anthropic pressure, while long-range transport can be the main source on other glaciers.

Following the fate of microplastic in four abiotic and biotic matrices along the Ticino River (North Italy).

Microplastics (MPs) are emerging contaminants in freshwater systems that have already attracted much scientific interest, but little attention has been paid to a multi-matrix analysis of MP occurrences along the length of a river. The present research provides the first record of MP contamination of four abiotic and biotic matrices from a river ecosystem simultaneously analysed. MPs were isolated and identified by micro-Fourier Transform Infrared (µ-FTIR) spectroscopy from samples collected along the Ticino River in North Italy during spring 2019. Abiotic samples were surface water (n = 18, 33 MPs m-3) and sediment (n = 18, 11 MPs kg-1), while biological samples consisted of stomach and gut content of fish (n = 18, wels catfish, Silurus glanis, 0.032 MPs g-1) and macroinvertebrates (n = 90, caddisfly larvae, Hydropsychidae, 0.03 MPs mg-1). MPs were found in biota from all stations; 44% of fish and 61% of macroinvertebrate samples contained MPs. The calculated unit-consistent concentration ratios indicate that both S. glanis and Hydropsychidae larvae had a consistent higher amount of MPs than their respective medium (sediment and water), strongly suggesting an efficient uptake pathway into organisms. MP levels in surface water, sediment, fish and macroinvertebrates were not correlated and did not increase with the river's length. From our mass balance calculations, the Ticino River transports a consistent amount of MP (yearly load of 3.40 × 1011 ± 1.1 × 1011 MPs) to the Po River. This MP load was almost half than an estimated MP load from wastewater treatment plants (WWTPs). On that basis and supported by the finding that MP concentration in sediment was mostly opposed to that in surface water but was on average 750-fold higher compared to the water matrix, we surmise that the complex hydrological network of the Ticino River retains a consistent amount of MPs which might build up over time.

Quantification of molecular weight discrimination in grafting to reactions from ultrathin polymer films by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In the present study, a reliable and robust method was developed to quantify the molecular weight discrimination that can occur in grafting to reactions via indirect MALDI-TOF quantification of the molecular weights of grafted chains by comparing the characteristics of the polymeric material before the grafting reaction with those of the unreacted material recovered after grafting. Two polystyrene samples with different molecular weights and narrow molecular weight distributions were employed to prepare model blends that were grafted to silicon wafers and an analytical method was developed and validated to assess and quantify the modification of the molecular weight distribution that takes place during the grafting to process. Particular attention was paid to the standardization of the sample treatment and to find the best data collection and calibration methodologies in order to have statistically significant data even in the presence of a very scarce amount of the sample. Furthermore, to evaluate the accuracy of the analytical procedure, the lack of suitable standard and certified materials required a further experiment to be carried out by comparing the new optimized MALDI-TOF method and direct measurements using TGA-GC-MS on a model blend containing deuterated and hydrogenated polystyrene samples with appropriate molecular weights and distributions. The optimized method was applied on samples obtained by a thermally induced grafting to reaction from ultrathin polymer films and, for the first time, to our knowledge, an enrichment effect occurring in the ultrathin grafted layer obtained from a melt was evidenced.

Effect of Trapped Solvent on the Interface between PS-b-PMMA Thin Films and P(S-r-MMA) Brush Layers.

The orientation of block copolymer (BCP) features in thin films can be obtained by spin-coating a BCP solution on a substrate surface functionalized by a polymer brush layer of the appropriate random copolymer (RCP). Although this approach is well established, little work reporting the amount and distribution of residual solvent in the polymer film after the spin-coating process is available. Moreover, no information can be found on the effect of trapped solvent on the interface between the BCP film and RCP brush. In this work, systems consisting of poly(styrene)-b-poly(methyl methacrylate) thin films deposited on poly(styrene-r-methyl methacrylate) brush layers are investigated by combining neutron reflectivity (NR) experiments with simulation techniques. An increase in the amount of trapped solvent is observed by NR as the BCP film thickness increases accompanied by a significant decrease of the interpenetration length between the BCP and RCP, thus suggesting that the interpenetration between grafted chains and block copolymer chains is hampered by the solvent. Hybrid particle-field molecular dynamics simulations of the analyzed system confirm the experimental observations and demonstrate a clear correlation between the interpenetration length and the amount of trapped solvent.

Effect of shell structure of Ti-immobilized metal ion affinity chromatography core-shell magnetic particles for phosphopeptide enrichment.

Magnetic materials in sample preparation for shotgun phosphoproteomics offer several advantages over conventional systems, as the enrichment can be achieved directly in solution, but they still suffer from some drawbacks, due to limited stability and selectivity, which is supposed to be affected by the hydrophilicity of the polymeric supports used for cation immobilization. The paper describes the development of an improved magnetic material with increased stability, thanks to a two-step covering of the magnetic core, for the enrichment of phosphopeptides in biological samples. Four materials were prepared featuring a polymeric shell with tunable hydrophilicity, obtained by "grafting from" polymerization of glycidyl methacrylate with 0-8.3% of polyethylene glycol methacrylate (PEGMA), the latter used to modulate the hydrophilicity of the material surface. Finally, the materials were functionalized with iminodiacetic acid for Ti4+ ion immobilization. The materials were analyzed for their composition by a combination of CHN elemental analysis and thermogravimetric analysis, also hyphenated to gas chromatography and mass spectrometric detection. Surface characteristics were evaluated by water contact angle measurements, scanning electron microscopy and energy dispersive X-ray spectrometry. These materials were applied to the enrichment of phosphopeptides from yeast protein digests. Peptides were identified by proteomics techniques using nano-high performance liquid chromatography coupled to mass spectrometry and bioinformatics. Qualitatively the peptides identified by the four systems were comparable, with 1606-1693 phosphopeptide identifications and a selectivity of 47-54% for all materials. The physico-chemical features of the identified peptides were also the same for the four materials. In particular, the grand average of hydropathy index values indicated that the enriched phosphopeptides were hydrophilic (ca. 90%), and only some co-enriched non-phosphorylated peptides were hydrophobic (21-28%), regardless of the material used for enrichment. Peptides had a pI ≤ 7, which indicated a well-known bias for acidic peptides binding, attributed to the interaction with the metal center itself. The results indicated that the enrichment of phosphopeptides and the co-enrichment of non-phosphorylated peptides is mainly driven by interactions with Ti4+ and does not depend on the amount of PEGMA chains in the polymer shell.