Repeatable Acoustic Vaporization of Coated Perfluorocarbon Bubbles for Micro-Actuation Inspired by Polypodium aureum.

Polypodium aureum, a fern, possesses a specialized spore-releasing mechanism like a catapult induced by the quick expansion of vaporized bubbles. This study introduces lipid-coated perfluorocarbon droplets to enable repeatable vaporization-condensation cycles, inspired by the repeatable vaporization of Polypodium aureum. Lipid-perfluorocarbon droplets have been considered not to exhibit repeatable oscillations due to bubble collapse of the low surface tension of lipid layers. However, a single lipid-dodecafluoropentane droplet with a diameter of 9.17 µm shows expansion-contraction oscillations over 4000 cycles by changing lipid composition and applying a low-power 1.7 MHz ultrasound to induce the partial vaporization of the droplets. The optimal combinations of shell composition, droplet fabrication, and acoustic conditions can minimize the damage on shell structure and promote a quick recovery of damaged shell layers. The highly expanding oscillatory microbubbles provide a new direction for fuel-free micro- or nanobots, as well as biomedical applications of contrast agents and drug delivery.

Clinical and radiological results of high tibial of osteotomy over the age of 65 are comparable to that of under 55 at minimum 2-year follow-up: a propensity score matched analysis.

PURPOSE: The results of medial open-wedge high tibial osteotomy (MOWHTO) according to age is inconclusive. This study aimed to compare the clinical outcomes and failure of MOWHTO in patients < 55 years and > 65 years. METHODS: Consecutive patients who underwent MOWHTO from July 2009 to August 2020 were retrospectively analyzed. 205 patients were considered for analysis. A 1-to-1 propensity score matched analysis to assess clinical outcomes scores including International Knee Documentation Committee (IKDC) subjective score and Lysholm score, radiologic outcomes, complication, and Total Knee Arthroplasty (TKA) conversion between patients > 65 years and patients < 55 years was performed. Radiologic outcomes included Hip-Knee-Ankle (HKA) angle, Weight Bearing Line ratio (WBLR), posterior tibial slope (PTS), and Insall-Salvati (IS) ratio before and after surgery. RESULTS: The follow-up period was 50.4 months in patients > 65 years and 55.3 months in patients < 55 years. There was no significant difference in the preoperative and postoperative HKA angle, WBLR, PTS, IS ratio, IKDC score and Lysholm score between the two groups. The arthroscopic evaluation of cartilage did not show any statistically significant differences between the two groups. Regarding Minimal clinically important differences (MCID), in the 26% of the older group exceeded MCID of IKDC score; 45% of the older group exceeded MCID of Lysholm score. In the younger group, 24% exceeded MCID of IKDC score and 35% exceeded MCID of Lysholm score. In older group, there were 7 (11.3%) cases of TKA conversion while no TKA conversion was recorded in the younger group. (P = 0.007) The average time to TKA conversion was 67 months. (42 months to 90 months) Kaplan-Meier analysis revealed that the survival rate was 95.2% at 4 years in the older group. CONCLUSION: Similar clinical results were obtained in patients over 65 years of age that were eligible for MOWHTO at minimum 2-year follow-up as in patients under 55 years of age. MOWHTO may be a viable option in older patients if proper indications are met. However, the risk of TKA conversion must be considered preoperatively and discussed with patients. STUDY DESIGN: Cohort study; Level of evidence, 3.

Trabecular structural difference between the superior and inferior regions of the vertebral body: a cadaveric and clinical study.

Background: Osteoporotic vertebral compression fractures commonly involve the superior vertebral body; however, their associated causes have not yet been clearly established. This study aimed to determine the trabecular structural differences between the superior and inferior regions of the vertebral body using cadaveric and clinical studies. Materials and methods: First, five vertebrae were collected from three human cadavers. The trabecular structures of the superior and inferior regions of each vertebral body were analyzed using micro-computed tomography (micro-CT), finite element analysis (FEA), and biomechanical test. Based on the results of the ex vivo study, we conducted a clinical study. Second, spine CT images were retrospectively collected. Bone volume and Hounsfield unit were analyzed for 192 vertebral bodies. Finally, after sample size calculation based on the pilot study, prospectively, 200 participants underwent dual-energy X-ray absorptiometry (DXA) of the lateral spine. The bone mineral densities (BMDs) of the superior and inferior regions of each lumbar vertebral body were measured. The paired t-test and Wilcoxon signed-rank test were used for the statistical analyses, and p-value < 0.05 was considered significant. Results: Cadaver studies revealed differences between the superior and inferior trabecular bone structures. The bone volume ratio, BMD, and various other trabecular parameters advocated for decreased strength of the superior region. Throughout the biomechanical study, the limitations of the compression force were 3.44 and 4.63 N/m2 for the superior and inferior regions, respectively. In the FEA study, the inferior region had a lower average displacement and higher von Mises stress than the superior region. In the clinical spine CT-based bone volume and BMD study, the bone volume was significantly higher in the inferior region than in the superior region. In the lateral spine DXA, the mean BMD of the superior region of vertebral bodies was significantly lower compared with that of the inferior region. Conclusion: The superior trabecular structure of the lumbar vertebral bodies possesses more biomechanical susceptibility compared with the inferior trabecular structure, confirming its dominant role in causing osteoporotic vertebral fractures. Physicians should also focus on the BMD values of the superior region of the vertebral body using lateral spine DXA to evaluate osteoporosis.

Source-specific probabilistic risk evaluation of potentially toxic metal(loid)s in fine dust of college campuses based on positive matrix factorization and Monte Carlo simulation.

Contamination, hazard level and source of 10 widely concerned potentially toxic metal(loid)s (PTMs) Co, As, Pb, Cr, Cu, Zn, Ni, Mn, Ba, and V in fine dust with particle size below 63 µm (FD63) were investigated to assess the environmental quality of college campuses and influencing factors. PTMs sources were qualitatively analyzed using statistical methods and quantitatively apportioned using positive matrix factorization. Probabilistic contamination degrees of PTMs were evaluated using enrichment factor and Nemerow integrated enrichment factor. Eco-health risk levels of content-oriented and source-oriented for PTMs were evaluated using Monte Carlo simulation. Mean levels of Zn (643.8 mg kg-1), Pb (146.0 mg kg-1), Cr (145.9 mg kg-1), Cu (95.5 mg kg-1), and Ba (804.2 mg kg-1) in FD63 were significantly larger than soil background values. The possible sources of the concerned PTMs in FD63 were traffic non-exhaust emissions, natural source, mixed source (auto repair waste, paints and pigments) and traffic exhaust emissions, which accounted for 45.7%, 25.4%, 14.5% and 14.4% of total PTMs contents, respectively. Comprehensive contamination levels of PTMs were very high, mainly caused by Zn pollution and non-exhaust emissions. Combined ecological risk levels of PTMs were low and moderate, chiefly caused by Pb and traffic exhaust emissions. The non-cancer risks of the PTMs in FD63 to college students fell within safety level, while the carcinogenic PTMs in FD63 had a certain cancer risks to college students. The results of source-specific health risk assessment indicated that Cr and As were the priority PTMs, and the mixed source was the priority pollution source of PTMs in FD63 from college campuses, which should be paid attention to by the local government.

Directional Radiative Cooling via Exceptional Epsilon-Based Microcavities.

The advent of nanophotonics enables the regulation of thermal emission in the momentum domain as well as in the frequency domain. However, earlier attempts to steer thermal emission in a certain direction were restricted to a narrow spectrum or specific polarization, and thus their average (8-14 µm) emissivity (εav) and angular selectivity were nominal. Therefore, the practical uses of directional thermal emitters have remained unclarified. Here, we report broadband, polarization-irrelevant, amplified directional thermal emission from hollow microcavities covered with deep-subwavelength-thickness oxide shells. A hexagonal array of SiO2/AlOX (100/100 nm) hollow microcavities designed by Bayesian optimization exhibited εav values of 0.51-0.62 at 60°-75° and 0.29-0.32 at 5°-20°, yielding a parabolic antenna-shaped distribution. The angular selectivity peaked at 8, 9.1, 10.9, and 12 µm, which were identified as the epsilon-near-zero (via Berreman modes) and maximum-negative-permittivity (via photon-tunneling modes) wavelengths of SiO2 and AlOX, respectively, thus supporting phonon-polariton resonance mediated broadband side emission. As proof-of-concept experiments, we demonstrated that these exceptional epsilon-based microcavities could provide thermal comfort to users and practical cooling performance to optoelectronic devices.

Synergistically designed antireflective cover for improving wide-angle photovoltaic efficiencies.

We demonstrated that a well-designed nanopatterned cover improves photovoltaic efficiency across a wide range of incident angles (θ). A nanopatterned cover was created using an integrated ray-wave optics simulation to maximize the light absorption of the surface-textured Si photovoltaic device. A hexagonally arranged nanocone array with a 300 nm pitch was formed into a polymer using nanoimprinting, and the nanostructured polymer was then attached to a glass cover with an index-matching adhesive. Angle-resolved current density-voltage measurements on Si photovoltaic devices showed that the nanopatterned glass cover yielded a 2-13% enhancement in power conversion efficiency at θ = 0-60°, which accounted for its broadband antireflective feature. We performed all-season-perspective simulations based on the results of the integrated ray-wave optics simulations and solar altitude database of South Korea, which validated the sustainability of the developed nanopatterned cover during significant seasonal fluctuations.

High-index-contrast photonic structures: a versatile platform for photon manipulation.

In optics, the refractive index of a material and its spatial distribution determine the characteristics of light propagation. Therefore, exploring both low- and high-index materials/structures is an important consideration in this regard. Hollow cavities, which are defined as low-index bases, exhibit a variety of unusual or even unexplored optical characteristics and are used in numerous functionalities including diffraction gratings, localised optical antennas and low-loss resonators. In this report, we discuss the fabrication of hollow cavities of various sizes (0.2-5 µm in diameter) that are supported by conformal dielectric/metal shells, as well as their specific applications in the ultraviolet (photodetectors), visible (light-emitting diodes, solar cells and metalenses), near-infrared (thermophotovoltaics) and mid-infrared (radiative coolers) regions. Our findings demonstrate that hollow cavities tailored to specific spectra and applications can serve as versatile optical platforms to address the limitations of current optoelectronic devices. Furthermore, hollow cavity embedded structures are highly elastic and can minimise the thermal stress caused by high temperatures. As such, future applications will likely include high-temperature devices such as thermophotovoltaics and concentrator photovoltaics.

A Scalable Haze-Free Antireflective Hierarchical Surface with Self-Cleaning Capability.

The lotus effect indicates that a superhydrophobic, self-cleaning surface can be obtained by roughening the topography of a hydrophobic surface. However, attaining high transmittance and clarity through a roughened surface remains challenging because of its strong scattering characteristics. Here, a haze-free, antireflective superhydrophobic surface that consists of hierarchically designed nanoparticles is demonstrated. Close-packed, deep-subwavelength-scale colloidal silica nanoparticles and their upper, chain-like fumed silica nanoparticles individually fulfill haze-free broadband antireflection and self-cleaning functions. These double-layered hierarchical surfaces are obtained via a scalable spraying process that permits precise control over the coating morphology to attain the desired optical and wetting properties. They provide a "specular" visible transmittance of >97% when double-side coated and a record-high self-cleaning capability with a near-zero sliding angle. Self-cleaning experiments on photovoltaic devices verify that the developed surfaces can significantly enhance power conversion efficiencies and aid in retaining pristine device performance in a dusty environment.

The inter-and intra-observer reliability of volar angulation measurements in a fifth metacarpal neck fracture.

INTRODUCTION: The fifth metacarpal neck fracture is the most common metacarpal fracture. The palmar angulation from the fracture displacement is critical for determining treatment, yet there is no consensus regarding the angulation measurement method or the surgical cut-off value. This study aimed to identify a reliable measurement method for assessing palmar angulation. We evaluated inter-observer and intra-observer validation of measuring palmar angulation in oblique plain X-ray and computed tomography (CT) sagittal cuts. MATERIALS AND METHODS: We identified surgically treated patients for acute isolated fifth metacarpal neck fracture between January 1, 2008, and December 31, 2020, and obtained preoperative, opposite hand, and final follow-up oblique X-rays and sagittal computed tomography (CT) radiograms. The oblique radiograph was taken with a 45° posteroanterior pronation. The metacarpal neck palmar angulation was measured in the radiograms using the metacarpal neck-shaft center (MNSC) angle and the shaft articular surface (SAS) angle methods by three orthopedic surgeons in two sessions. For the CT radiograms, each measurer selected the sagittal slot at their discretion to measure the angle. The final palmar angulation was the average of six measurements (two sessions, three measurers per session). RESULTS: The study included 51 patients; the average age was 32.5 (range 18-73) years, with 46 men and 5 women. The MNSC angle inter-observer reliability was better than the SAS angle. The MNSC angle inter-observer reliability was better than that of SAS angle. Intraclass coefficients (ICCs) for the MNSC angle demonstrated an excellent inter-observer agreement among the three measurers in the first (0.93) and second (0.88) session compared to ICCs for the SAS angle in the first (0.81) and second (0.87) session. The MNSC angle intra-observer reliability was also better than the SAS angle, with higher ICCs. Preoperative CT radiograms were available for 42 patients. Using CT scans for measurements, in the two sessions, the MNSC angle inter-observer reliability was higher than that of the SAS angle [MNSC: 0.83; SAS: 0.35], second [MSNC: 0.85; SAS: 0.81]. The intra-observer reliability was also better in the MNSC angle. When comparing average value among obtained radiograms, the physiologic angulation of the opposite hand oblique X-ray had the smallest average value, followed by preoperative CT and preoperative oblique radiography. Overall, the SAS angle measurement had a slightly larger angle than the MNSC method in the fractured and non-fractured hand measurements. Finally, a serial comparison of the oblique X-rays (pre-and postoperative, final follow-up, and the opposite hand with closed reduction and internal fixation) indicated that the angulation significantly decreased, and the post-operative values did not differ from the final follow-up X-ray for either method. CONCLUSIONS: The palmar angulation measurement in 45° pronated oblique X-ray using the MNSC angle method had good-to-excellent reliability, with superior results to sagittal CT radiograms. Although the angle is likely overestimated, the MNSC method is reliable for judging the fracture degree and reduction adequacy after surgery compared to the non-fractured hand physiologic angulation.

Full-Color Solar-Heat-Resistant Films Based on Nanometer Optical Coatings.

Nanometer optical coatings with absorbing materials allow the tuning of structured absorption spectra, thus developing ultrathin color devices. However, these coatings are limited by the narrow bandwidth and tunability of wavelength that restrict the chroma and hue characteristics of colors, respectively, apart from imposing adverse thermal problems under sunlight exposure. Here, we demonstrate that inversely designed TiN/ZnS/Ag coatings attain a wide color gamut in the trilayer configuration and efficiently dissipate heat through thermal radiation when transfer-printed on high-emissivity polymers. Daytime experiments reveal that fabricated optical films yield an almost color-independent heat dissipation rate against solar heating. Moreover, they outperform commercial paints of the same color when applied to three-dimensional miniature houses. All magenta, green, cyan, and yellow optical films lower the roof temperature by 10, 6, 8, and 2 °C below one sun irradiance, respectively, compared to their paint counterparts; the temperature gradient increases directly with the level of sunlight.