Multichannel focused higher-order Poincaré sphere beam generation based on a dielectric geometric metasurface.

Focused vector beams (VBs) are important topic in the areas of light field manipulation. Geometric metasurfaces provide a convenient platform to facilitate the generation of focused VBs. In this study, we propose a dielectric geometric metasurface to generate multichannel focused higher-order Poincaré sphere (HOP) beams. With identical meta-atoms of half-wave plate, the metasurface comprises two sub-metasurfaces, and each of them includes two sets of rings related to Fresnel zones. For meta-atoms on each set of rings, the hyperbolic geometric phase profile is configured so that the mirror-symmetrical position-flip of the off-axis focal point is enabled under the chirality switch of the illuminating circular polarization. With the design of helical geometric phase profiles for the two sets of rings, a sub-metasurface generate two HOP beams at the symmetrical two focal points. The performance of the two sub-metasurfaces enables the metasurface with four sets of rings to generate the array of four HOP beams. The proposed method was validated by theoretical analyses, numerical simulation and experimental conduction. This research would be significant in miniaturizing and integrating optical systems involving applications of VB generations and applications.

Ultra-robust informational metasurfaces based on spatial coherence structures engineering.

Optical information transmission is vital in modern optics and photonics due to its concurrent and multi-dimensional nature, leading to tremendous applications such as optical microscopy, holography, and optical sensing. Conventional optical information transmission technologies suffer from bulky optical setup and information loss/crosstalk when meeting scatterers or obstacles in the light path. Here, we theoretically propose and experimentally realize the simultaneous manipulation of the coherence lengths and coherence structures of the light beams with the disordered metasurfaces. The ultra-robust optical information transmission and self-reconstruction can be realized by the generated partially coherent beam with modulated coherence structure even 93% of light is recklessly obstructed during light transmission, which brings new light to robust optical information transmission with a single metasurface. Our method provides a generic principle for the generalized coherence manipulation on the photonic platform and displays a variety of functionalities advancing capabilities in optical information transmission such as meta-holography and imaging in disordered and perturbative media.

Ultrafast all-optical second harmonic wavefront shaping.

Optical communication can be revolutionized by encoding data into the orbital angular momentum of light beams. However, state-of-the-art approaches for dynamic control of complex optical wavefronts are mainly based on liquid crystal spatial light modulators or miniaturized mirrors, which suffer from intrinsically slow (µs-ms) response times. Here, we experimentally realize a hybrid meta-optical system that enables complex control of the wavefront of light with pulse-duration limited dynamics. Specifically, by combining ultrafast polarization switching in a WSe2 monolayer with a dielectric metasurface, we demonstrate second harmonic beam deflection and structuring of orbital angular momentum on the femtosecond timescale. Our results pave the way to robust encoding of information for free space optical links, while reaching response times compatible with real-world telecom applications.

Quantitative gas pressure measurement by molecular spectroscopy using chip-based supercontinuum in the mid-infrared.

We demonstrate the quantitative pressure measurement of gas molecules in the mid-infrared using chip-based supercontinuum and cepstrum analysis without additional measurements for baseline normalization. A supercontinuum generated in an on-chip waveguide made of chalcogenide glass having high nonlinearity passes through CO gas and provides a transmission spectrum. The gas absorption information is deconvoluted from the original supercontinuum spectral information containing temporal fluctuation by cepstrum analysis and extracted simply by applying a bandpass filter in the temporal domain. The gas pressure estimated from the extracted absorption information is consistent with the value measured by a pressure gauge within a difference of 1.25%, despite spectral fluctuations in the supercontinuum baseline comparable to the spectral depth of the gas absorption lines.

Integrated microwave photonic notch filter using a heterogeneously integrated Brillouin and active-silicon photonic circuit.

Microwave photonics (MWP) has unlocked a new paradigm for Radio Frequency (RF) signal processing by harnessing the inherent broadband and tunable nature of photonic components. Despite numerous efforts made to implement integrated MWP filters, a key RF processing functionality, it remains a long-standing challenge to achieve a fully integrated photonic circuit that can merge the megahertz-level spectral resolution required for RF applications with key electro-optic components. Here, we overcome this challenge by introducing a compact 5 mm × 5 mm chip-scale MWP filter with active E-O components, demonstrating 37 MHz spectral resolution. We achieved this device by heterogeneously integrating chalcogenide waveguides, which provide Brillouin gain, in a complementary metal-oxide-semiconductor (CMOS) foundry-manufactured silicon photonic chip containing integrated modulators and photodetectors. This work paves the way towards a new generation of compact, high-resolution RF photonic filters with wideband frequency tunability demanded by future applications, such as air and spaceborne RF communication payloads.

Switchable optical trapping based on vortex-pair beams generated by a polarization-multiplexed dielectric metasurface.

Optical trapping is a state-of-the-art methodology that plays an integral role in manipulating and investigating microscopic objects but faces formidable challenges in multiparticle trapping, flexible manipulation, and high-integration applications. In this study, we propose and demonstrate a switchable optical scheme for trapping microparticles incorporating disparate vortex-pair beams generated by a polarization-multiplexed metasurface. The miniaturized all-dielectric metasurface, which comprises an array of titanium dioxide nanoposts, was manufactured and characterized to provide polarization-tuned two-fold vortex-pair beams. The profiles of the created vortices can be flexibly tailored by adjusting the combination of topological charges and the separation among phase singularities. Under transverse electric polarized light conditions, a vortex-pair beam with opposite topological charge combinations traps a single microparticle within one beam spot, while under transverse magnetic polarization conditions, two microparticles are captured simultaneously by a vortex-pair beam with the same topological charge signs. The proposed switchable trapping scheme (incorporating a vortex-pair light beam) is expected to feature enhanced integration and flexible manipulation of multiple particles with potential applications in biophysics, nanotechnology, and photonics.

Characterization of Orbital Angular Momentum Quantum States Empowered by Metasurfaces.

Twisted photons can in principle carry a discrete unbounded amount of orbital angular momentum (OAM), which are of great significance for quantum communication and fundamental tests of quantum theory. However, the methods for characterization of the OAM quantum states present a fundamental limit for miniaturization. Metasurfaces can exploit new degrees of freedom to manipulate optical fields beyond the capabilities of bulk optics, opening a broad range of novel and superior applications in quantum photonics. Here we present a scheme to reconstruct the density matrix of the OAM quantum states of single photons with all-dielectric metasurfaces composed of birefringent meta-atoms. We have also measured the Schmidt number of the OAM entanglement by the multiplexing of multiple degrees of freedom. Our work represents a step toward the practical application of quantum metadevices for the measurement of OAM quantum states in free-space quantum imaging and communications.

Chip-based SBS for image rejection in a broadband microwave photonic mixer.

Microwave photonics offers a promising solution for frequency converting microwave signals, however, demonstrations so far have either been bulky fibre implementations or lacked rejection of interfering image signals. Here, we demonstrate the first microwave photonic mixer with image rejection of broadband signals utilising chip-based stimulated Brillouin scattering and interferometry. We demonstrate frequency down-conversion of carrier frequencies ranging from 10 GHz-16 GHz, ultra-high image rejection for a single tone of up to 70 dB, and 100 MHz and 400 MHz wide analogue signals with 28.5 dB and 16 dB image rejection, respectively. Furthermore, we down-convert 200 Mb/s quadrature-phase-shift keying signals with an error vector magnitude as low as -9.6 dB when simultaneously present interfering image signals are suppressed by the mixer.

Spatial Coherence Manipulation on the Disorder-Engineered Statistical Photonic Platform.

Coherence, similar to amplitude, polarization, and phase, is a fundamental characteristic of the light fields and is dominated by the statistical optical property. Although spatial coherence is one of the pivotal optical dimensions, it has not been significantly manipulated on the photonic platform. Here, we theoretically and experimentally manipulate the spatial coherence of light fields by loading different random phase distributions onto the wavefront with a metasurface. We achieve the generation of partially coherent light with a predefined degree of coherence and continuously modulate it from coherent to incoherent by controlling the phase fluctuation ranges or the beam sizes. This design strategy can be easily extended to manipulate arbitrary phase-only special beams with the same degree of coherence. Our approach provides straightforward rules to manipulate the coherence of light fields in an extra-cavity-based manner and paves the way for further applications in ghost imaging and information transmission in turbulent media.

Polarization response of planarized optical waveguides to determine the anisotropic complex refractive index of graphene oxide thin films.

The polarization response of graphene oxide (GO)-coated planarized optical waveguides is used to determine the complex refractive index of GO film. GO films with thicknesses between 0.10 and 0.71 µm were coated on planarized optical waveguides. GO-coated waveguides exhibit large polarization dependent losses-and the polarization response depends strongly on the GO coating thickness. The response was used, together with finite element analysis, to determine the complex refractive index of the GO film. The complex refractive indices of GO films for both TE- and TM-polarized light at a wavelength of 1550 nm were found to be 1.71+0.09i and 1.58+0.05i, respectively. The uncertainties of nGO and kGO for TE-polarized light are ±0.02 and ±0.03, respectively, whereas the uncertainties of nGO and kGO for TM-polarized light are ±0.05 and ±0.02, respectively.

Two-point coupling method to independently control coupling efficiency at different wavelengths.

To efficiently access light waves confined in a high-quality-factor (Q) microcavity over a wide spectral range, it is necessary to independently control coupling efficiency at different wavelengths. Here we suggest an approach to add a degree of freedom to control the coupling efficiency based on a two-point coupling geometry. By changing the phase difference between two paths connecting two coupling points, various combinations of coupling efficiencies at multiple wavelengths can be achieved. An analytic model describing the coupling property is derived and confirmed by experimental results. It is also shown that the coupling property can be modified by adjusting the effective refractive index difference between a waveguide and a resonator.

Nonlinear Imaging of Nanoscale Topological Corner States.

Topological states of light represent counterintuitive optical modes localized at boundaries of finite-size optical structures that originate from the properties of the bulk. Being defined by bulk properties, such boundary states are insensitive to certain types of perturbations, thus naturally enhancing robustness of photonic circuitries. Conventionally, the N-dimensional bulk modes correspond to (N - 1)-dimensional boundary states. The higher-order bulk-boundary correspondence relates N-dimensional bulk to boundary states with dimensionality reduced by more than 1. A special interest lies in miniaturization of such higher-order topological states to the nanoscale. Here, we realize nanoscale topological corner states in metasurfaces with C6-symmetric honeycomb lattices. We directly observe nanoscale topology-empowered edge and corner localizations of light and enhancement of light-matter interactions via a nonlinear imaging technique. Control of light at the nanoscale empowered by topology may facilitate miniaturization and on-chip integration of classical and quantum photonic devices.

Supercontinuum generation in As2S3 waveguides fabricated without direct etching.

We report a supercontinuum generation (SCG) in a waveguide that spontaneously forms without an etching process during the deposition of a core material on a preformed ${\rm{Si}}{{\rm{O}}_2}$ substructure. The mechanism of dispersion control for this new, to the best of our knowledge, type of waveguide is analyzed by numerical simulation, which results in a design rule to achieve a target dispersion profile by adjusting the substructure geometry. SCG is experimentally demonstrated with a waveguide made of ${\rm{A}}{{\rm{s}}_2}{{\rm{S}}_3}$, chalcogenide glass, which has low material absorption over the mid-IR range. A dispersion-controlled waveguide with a length of 10 mm pumped with 77 pJ pulses at a telecommunication wavelength of 1560 nm resulted in a supercontinuum that extends by more than 1.5 octaves.

Efficient All-Dielectric Diatomic Metasurface for Linear Polarization Generation and 1-Bit Phase Control.

Optical metasurface has exhibited unprecedented capabilities in the regulation of light properties at a subwavelength scale. In particular, a multifunctional polarization metasurface making use of light polarization to integrate distinct functionalities on a single platform can be greatly helpful in the miniaturization of photonic systems and has become a hot research topic in recent years. Here, we propose and demonstrate an efficient all-dielectric diatomic metasurface, the unit cell of which is composed of a pair of a-Si:H-based nanodisks and nanopillars that play the roles as polarization-maintaining and polarization-converting meta-atoms, respectively. Through rigorous theoretical analyses and numerical simulations, we show that a properly designed diatomic metasurface can work as a nanoscale linear polarizer for generating linearly polarized light with a controllable polarization angle and superior performances including a maximum transmission efficiency of 96.2% and an extinction ratio of 32.8 dB at an operation wavelength of 690 nm. Three metasurface samples are fabricated and experimentally characterized to verify our claims and their potential applications. Furthermore, unlike previously reported dielectric diatomic metasurfaces which merely manipulate the polarization state, the proposed diatomic metasurface can be easily modified to empower 1-bit phase modulation without altering the polarization angle and sacrificing the transmission efficiency. This salient feature further leads to the demonstration of a metasurface beam splitter that can be equivalently seen as the integration of a nonpolarizing beam splitter and a linear polarizer, which has never been reported before. We envision that various metadevices equipping with distinct wavefront shaping functionalities can be realized by further optimizing the diatomic metasurface to achieve an entire 2π phase control.

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells.

Polymer passivation layers can improve the open-circuit voltage of perovskite solar cells when inserted at the perovskite-charge transport layer interfaces. Unfortunately, many such layers are poor conductors, leading to a trade-off between passivation quality (voltage) and series resistance (fill factor, FF). Here, we introduce a nanopatterned electron transport layer that overcomes this trade-off by modifying the spatial distribution of the passivation layer to form nanoscale localized charge transport pathways through an otherwise passivated interface, thereby providing both effective passivation and excellent charge extraction. By combining the nanopatterned electron transport layer with a dopant-free hole transport layer, we achieved a certified power conversion efficiency of 21.6% for a 1-square-centimeter cell with FF of 0.839, and demonstrate an encapsulated cell that retains ~91.7% of its initial efficiency after 1000 hours of damp heat exposure.

Integrated microwave photonic true-time delay with interferometric delay enhancement based on Brillouin scattering and microring resonators.

True-time delays are important building blocks in modern radio frequency systems that can be implemented using integrated microwave photonics, enabling higher carrier frequencies, improved bandwidths, and a reduction in size, weight, and power. Stimulated Brillouin scattering (SBS) offers optically-induced continuously tunable delays and is thus ideal for applications that require programmable reconfiguration but previous approaches have been limited by large SBS gain requirements. Here, we overcome this limitation by using radio-frequency interferometry to enhance the Brillouin-induced delay applied to the optical sidebands that carry RF signals, while controlling the phase of the optical carrier with integrated silicon nitride microring resonators. We report a delay tunability over 600 ps exploiting an enhancement factor of 30, over a bandwidth of 1 GHz using less than 1 dB of Brillouin gain utilizing a photonic chip architecture based on Brillouin scattering and microring resonators.

Universal light-guiding geometry for on-chip resonators having extremely high Q-factor.

By providing an effective way to leverage nonlinear phenomena in integrated devices, high-Q optical resonators have led to recent advances in on-chip photonics. However, developing fabrication processes to shape any new material into a resonator with extremely smooth surfaces on a chip has been an exceptionally challenging task. Here, we describe a universal method to implement ultra-high-Q resonators with any new material having desirable properties that can be deposited by physical vapor deposition. Using this method light-guiding cores with surface roughness on the molecular-scale are created automatically on pre-patterned substrates. Its efficacy has been verified using As2S3, a chalcogenide glass that has high-nonlinearity. The Q-factor of the As2S3 resonator so-developed approached the propagation loss record achieved in chalcogenide fibers which were limited by material losses. Owing to the boosted Q-factor, lasing by stimulated Brillouin scattering has been demonstrated with 100 times lower threshold power than the previous record.

High-conversion-gain and deep-image-rejection Brillouin chip-based photonic RF mixer.

In this Letter, we report a chip-based photonic radio-frequency (RF) mixer with a maximum conversion gain of -9dB and image rejection ratio of 50 dB for 3.2 GHz to 13.2 GHz RF frequency range. This is achieved by the combined use of optical carrier suppression modulation and on-chip stimulated Brillouin scattering. These results will stimulate future implementations of integrated photonic RF mixers in complicated electromagnetic environments.

Low-RF-loss and large-rejection reconfigurable Brillouin-based RF photonic bandpass filter.

We present a high-performance radio frequency (RF) photonic bandpass filter enabled by combining on-chip Brillouin scattering with a suppressed carrier phase modulation scheme. We achieve a low RF loss of 5 dB and a large stopband rejection of more than 40 dB, which represents a significant improvement of 20 dB to the RF passband gain and 31 dB to the RF rejection ratio over traditional modulation schemes under the same optical power consumption. We further demonstrate filter reconfigurability including multiple passbands, wide frequency (1-20 GHz), and bandwidth tunability (30-350 MHz) without compromising the RF performance.

Quasi-BIC Resonant Enhancement of Second-Harmonic Generation in WS2 Monolayers.

Atomically thin monolayers of transition metal dichalcogenides (TMDs) have emerged as a promising class of novel materials for optoelectronics and nonlinear optics. However, the intrinsic nonlinearity of TMD monolayers is weak, limiting their functionalities for nonlinear optical processes such as frequency conversion. Here we boost the effective nonlinear susceptibility of a TMD monolayer by integrating it with a resonant dielectric metasurface that supports pronounced optical resonances with high quality factors: bound states in the continuum (BICs). We demonstrate that a WS2 monolayer combined with a silicon metasurface hosting BICs exhibits enhanced second-harmonic intensity by more than 3 orders of magnitude relative to a WS2 monolayer on top of a flat silicon film of the same thickness. Our work suggests a pathway to employ high-index dielectric metasurfaces as hybrid structures for enhancement of TMD nonlinearities with applications in nonlinear microscopy, optoelectronics, and signal processing.