A lanthanide-rich kilonova in the aftermath of a long gamma-ray burst.

Observationally, kilonovae are astrophysical transients powered by the radioactive decay of nuclei heavier than iron, thought to be synthesized in the merger of two compact objects1-4. Over the first few days, the kilonova evolution is dominated by a large number of radioactive isotopes contributing to the heating rate2,5. On timescales of weeks to months, its behaviour is predicted to differ depending on the ejecta composition and the merger remnant6-8. Previous work has shown that the kilonova associated with gamma-ray burst 230307A is similar to kilonova AT2017gfo (ref. 9), and mid-infrared spectra revealed an emission line at 2.15 micrometres that was attributed to tellurium. Here we report a multi-wavelength analysis, including publicly available James Webb Space Telescope data9 and our own Hubble Space Telescope data, for the same gamma-ray burst. We model its evolution up to two months after the burst and show that, at these late times, the recession of the photospheric radius and the rapidly decaying bolometric luminosity (Lbol ∝ t-2.7±0.4, where t is time) support the recombination of lanthanide-rich ejecta as they cool.

Direct identification of interfacial degradation in blue OLEDs using nanoscale chemical depth profiling.

Understanding the degradation mechanism of organic light-emitting diodes (OLED) is essential to improve device performance and stability. OLED failure, if not process-related, arises mostly from chemical instability. However, the challenges of sampling from nanoscale organic layers and interfaces with enough analytical information has hampered identification of degradation products and mechanisms. Here, we present a high-resolution diagnostic method of OLED degradation using an Orbitrap mass spectrometer equipped with a gas cluster ion beam to gently desorb nanometre levels of materials, providing unambiguous molecular information with 7-nm depth resolution. We chemically depth profile and analyse blue phosphorescent and thermally-activated delayed fluorescent (TADF) OLED devices at different degradation levels. For OLED devices with short operational lifetimes, dominant chemical degradation mainly relate to oxygen loss of molecules that occur at the interface between emission and electron transport layers (EML/ETL) where exciton distribution is maximised, confirmed by emission zone measurements. We also show approximately one order of magnitude increase in lifetime of devices with slightly modified host materials, which present minimal EML/ETL interfacial degradation and show the method can provide insight for future material and device architecture development.

Critical role of electrons in the short lifetime of blue OLEDs.

Designing robust blue organic light-emitting diodes is a long-standing challenge in the display industry. The highly energetic states of blue emitters cause various degradation paths, leading to collective luminance drops in a competitive manner. However, a key mechanism of the operational degradation of organic light-emitting diodes has yet to be elucidated. Here, we show that electron-induced degradation reactions play a critical role in the short lifetime of blue organic light-emitting diodes. Our control experiments demonstrate that the operational lifetime of a whole device can only be explained when excitons and electrons exist together. We examine the atomistic mechanisms of the electron-induced degradation reactions by analyzing their energetic profiles using computational methods. Mass spectrometric analysis of aged devices further confirm the key mechanisms. These results provide new insight into rational design of robust blue organic light-emitting diodes.

Probing twisted intramolecular charge transfer of pyrene derivatives as organic emitters in OLEDs.

Intramolecular charge transfer (ICT) plays a critical role in determining the photophysical properties of organic molecules, including their luminescence efficiencies. Twisted intramolecular charge transfer (TICT) is a process in which structural change accompanies ICT. Herein, we used time-resolved spectroscopy to study TICT in pyrene derivatives that are promising blue organic light emitting diode (OLED) emitter candidates; these derivatives show strong solvent-dependent charge-transfer (CT) behavior with unique fluorescence properties, increased fluorescence intensity in polar solvent. Slight structural changes that do not affect excited state dynamics were observed in nonpolar solvents, while polar solvents were found to affect excited state dynamics and CT characteristics, which affect their unusual fluorescence behavior. The TICT behavior of these pyrene derivatives can be modulated through structural modification. Our study provides valuable guidelines for the control of optical properties, including the luminescence efficiencies of OLED emitters that show TICT characteristics.

Multiple-Resonance Extension and Spin-Vibronic-Coupling-Based Narrowband Blue Organic Fluorescence Emitters with Over 30% Quantum Efficiency.

Achieving narrow-bandwidth emission and high external quantum efficiency (EQE) simultaneously is a challenge for next-generation blue-emitting organic light-emitting diodes (OLEDs). In this study, novel multiple-resonance thermally activated delayed fluorescence (MR-TADF) emitters are developed by fusing an indolocarbazole unit with two carbazole skeletons using para-oriented nitrogen atoms. The resulting rigid and planar π-system without electron-accepting atoms exhibits pure blue photoluminescence at 470 nm, reaching a 100% quantum yield with a full-width-at-half-maximum (FWHM) of 25 nm. Higher-level quantum chemistry calculations confirm an MR effect within the extended π-conjugation and an enhanced triplet-to-singlet crossover (104 s-1 ) through a reduced energy gap (ΔEST ) coupled with large spin-vibronic coupling mediated by low-lying triplet excited states. An OLED fabricated using the MR-TADF emitter with CIE color coordinates of (0.12, 0.16) exhibits a record high EQE of 30.9% and a small FWHM of 23 nm. With further optimization of the device structure, a high EQE of 33.8% is achieved without additional outcoupling enhancements owing to the near-perfect horizontal alignment of the emitting dipoles.

Dipole Moment- and Molecular Orbital-Engineered Phosphine Oxide-Free Host Materials for Efficient and Stable Blue Thermally Activated Delayed Fluorescence.

To utilize thermally activated delayed fluorescence (TADF) technology for future displays, it is necessary to develop host materials which harness the full potential of blue TADF emitters. However, no publication has reported such hosts yet. Although the most popular host for blue TADF, bis[2-(diphenylphosphino)phenyl]ether oxide (DPEPO) guarantees high-maximum external quantum efficiency (EQEmax ) TADF devices, they exhibit very short operational lifetimes. In contrast, long-lifespan blue TADF devices employing stable hosts such as 3',5-di(9H-carbazol-9-yl)-[1,1'-biphenyl]-3-carbonitrile (mCBP-CN) exhibit much lower EQEmax than the DPEPO-employed devices. Here, an elaborative approach for designing host molecules is suggested to achieve simultaneously stable and efficient blue TADF devices. The approach is based on engineering the molecular geometry, ground- and excited-state dipole moments of host molecules. The engineered hosts significantly enhance delayed fluorescence quantum yields of TADF emitters, as stabilizing the charge-transfer excited states of the TADF emitters and suppressing exciton quenching, and improve the charge balance. Moreover, they exhibit both photochemical and electrochemical stabilities. The best device employing one of the engineered hosts exhibits 79% increase in EQEmax compared to the mCBP-CN-employed device, together with 140% and 92-fold increases in operational lifetime compared to the respective mCBP-CN- and the DPEPO-based devices.

Exploring the Role of Surface States in Emissive Carbon Nanodots: Analysis at Single-Particle Level.

Fluorescent carbon nanodots (CDs) have been highlighted as promising semiconducting materials due to their outstanding chemical and optical properties. However, the intrinsic heterogeneity of CDs has impeded a clear understanding of the mechanisms behind their photophysical properties. In this study, as-prepared CDs are fractionated via chromatography to reduce their structural and chemical heterogeneity and analyzed through ensemble and single-particle spectroscopies. Many single particles reveal fluorescence intensity fluctuations between two or more discrete levels with bi-exponential decays. While the intrinsic τ1 components are uniform among single particles, the τ2 components from molecule-like emissions spans a wider range of lifetimes, reflecting the inhomogeneity of the surface states. Furthermore, it is concluded that the relative population and chemical states of surface functional groups in CDs have a significant impact on emissive states, brightness, blinking, stability, and lifetime distribution of photoluminescence.

Three States Involving Vibronic Resonance is a Key to Enhancing Reverse Intersystem Crossing Dynamics of an Organoboron-Based Ultrapure Blue Emitter.

The recently developed narrow-band blue-emitting organoboron chromophores based on the multiple-resonance (MR) effect have now become one of the most important components for constructing efficient organic light emitting diodes (OLEDs). While they basically emit through fluorescence, they are also known for showing substantial thermally activated delayed fluorescence (TADF) even with a relatively large singlet-triplet gap (ΔE ST). Indeed, understanding the reverse intersystem crossing (RISC) dynamics behind this peculiar TADF will allow judicious molecular designs toward achieving better performing OLEDs. Explaining the underlying nonadiabatic spin-flip mechanism, however, has often been equivocal, and how the sufficiently fast RISC takes place even with the sizable ΔE ST and vanishingly small spin-orbit coupling is not well understood. Here, we show that a vibronic resonance, namely the frequency matching condition between the vibration and the electronic energy gap, orchestrates three electronic states together and this effect plays a major role in enhancing RISC in a typical organoboron emitter. Interestingly, the mediating upper electronic state is quite high in energy to an extent that its thermal population is vanishingly small. Through semiclassical quantum dynamics simulations, we further show that the geometry dependent non-Condon coupling to the upper triplet state that oscillates with the frequency ΔE ST/ℏ is the main driving force behind the peculiar resonance enhancement. The existence of an array of vibrational modes with strong vibronic rate enhancements provides the ability to sustain efficient RISC over a range of ΔE ST in defiance of the energy gap law, which can render the MR-emitters peculiar in comparison with more conventional donor-acceptor type emitters. Our investigation may provide a new guide for future blue emitting molecule developments.

Purely Spin-Vibronic Coupling Assisted Triplet to Singlet Up-Conversion for Real Deep Blue Organic Light-Emitting Diodes with Over 20% Efficiency and y Color Coordinate of 0.05.

Finding narrow-band, ultrapure blue thermally activated delayed fluorescence (TADF) materials is extremely important for developing highly efficient organic light-emitting diodes (OLEDs). Here, spin-vibronic coupling (SVC)-assisted ultrapure blue emitters obtained by joining two carbazole-derived moieties at a para position of a phenyl unit and performing substitutions using several blocking groups are presented. Despite a relatively large singlet-triplet gap (∆EST ) of >0.2 eV, efficient triplet-to-singlet crossover can be realized, with assistance from resonant SVC. To enhance the spin crossover, electronic energy levels are fine-tuned, thereby causing ∆EST to be in resonance with a triplet-triplet gap (∆ETT ). A sizable population transfer between spin multiplicities (>103 s-1 ) is achieved, and this result agrees well with theoretical predictions. An OLED fabricated using a multiple-resonance-type SVC-TADF emitter with CIE color coordinates of (0.15, 0.05) exhibits ultrapure blue emissions, with a narrow full-width-at-half-maximum of 21 nm and a high external quantum efficiency of 23.1%.

Improved Efficiency and Lifetime of Deep-Blue Hyperfluorescent Organic Light-Emitting Diode using Pt(II) Complex as Phosphorescent Sensitizer.

Although the organic light-emitting diode (OLED) has been successfully commercialized, the development of deep-blue OLEDs with high efficiency and long lifetime remains a challenge. Here, a novel hyperfluorescent OLED that incorporates the Pt(II) complex (PtON7-dtb) as a phosphorescent sensitizer and a hydrocarbon-based and multiple resonance-based fluorophore as an emitter (TBPDP and ν-DABNA) in the device emissive layer (EML), is proposed. Such an EML system can promote efficient energy transfer from the triplet excited states of the sensitizer to the singlet excited states of the fluorophore, thus significantly improving the efficiency and lifetime of the device. As a result, a deep-blue hyperfluorescent OLED using a multiple resonance-based fluorophore (ν-DABNA) with Commission Internationale de L'Eclairage chromaticity coordinate y below 0.1 is demonstrated, which attains a narrow full width at half maximum of ≈17 nm, fourfold increased maximum current efficiency of 48.9 cd A-1 , and 19-fold improved half-lifetime of 253.8 h at 1000 cd m-2 compared to a conventional phosphorescent OLED. The findings can lead to better understanding of the hyperfluorescent OLEDs with high performance.

Gold(i)-doped films: new routes for efficient room temperature phosphorescent materials.

The synthesis of four novel gold(i)-phosphane complexes coordinated to 9-phenanthrene chromophore has been carried out through the reaction of 9-phenanthreneboronic acid and the corresponding AuClPR3 (PR3 = PPh3 for triphenylphosphane (1a); 1,4-bis(diphenylphosphanyl)butane or dppb (2b); bis(diphenylphosphanyl)acetylene or dppa (2c); (AuCl)2(diphos) (diphos = bis(diphenylphosphanyl)methane or dppm (3)) sources. The X-ray crystal structures of compounds 1a and 2b show the existence of MOF-like intermolecular assemblies that contain empty inner cavities in the absence of aurophilic contacts. In contrast, the formation of a tetranuclear complex with intramolecular aurophilic interactions was evidenced for 3. Photophysical characterization indicates dual emission in all gold(i) complexes when oxygen is removed from the sample, while only fluorescence emission is recorded for the uncoordinated ligand. The introduction of the compounds within PMMA and Zeonex was assayed, and luminescent films containing gold(i) complexes where phosphorescence is the sole pathway for emission are obtained, instead of the dual emission (with significant fluorescence contribution) recorded in solution.

Computational Discovery of TTF Molecules with Deep Generative Models.

We present a computational workflow based on quantum chemical calculations and generative models based on deep neural networks for the discovery of novel materials. We apply the developed workflow to search for molecules suitable for the fusion of triplet-triplet excitations (triplet-triplet fusion, TTF) in blue OLED devices. By applying generative machine learning models, we have been able to pinpoint the most promising regions of the chemical space for further exploration. Another neural network based on graph convolutions was trained to predict excitation energies; with this network, we estimate the alignment of energy levels and filter molecules before running time-consuming quantum chemical calculations. We present a comprehensive computational evaluation of several generative models, choosing a modification of the Junction Tree VAE (JT-VAE) as the best one in this application. The proposed approach can be useful for computer-aided design of materials with energy level alignment favorable for efficient energy transfer, triplet harvesting, and exciton fusion processes, which are crucial for the development of the next generation OLED materials.

Effect of Gold(I) on the Room-Temperature Phosphorescence of Ethynylphenanthrene.

The synthesis of two series of gold(I) complexes with the general formulae PR3 -Au-C≡C-phenanthrene (PR3 =PPh3 (1 a/2 a), PMe3 (1 b/2 b), PNaph3 (1 c/2 c)) or (diphos)(Au-C≡C-phenanthrene)2 (diphos=1,1-bis(diphenylphosphino)methane, dppm (1 d/2 d), 1,4-bis(diphenylphosphino)butane, dppb (1 e/2 e)) has been realized. The two series differ in the position of the alkynyl substituent on the phenanthrene chromophore, being at the 9-position (9-ethynylphenanthrene) for the L1 series and at the 2-position (2-ethynylphenanthrene) for the L2 series. The compounds have been fully characterized by 1 H, 31 P NMR, and IR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction resolution in the case of compounds 1 a, 1 e, 2 a, and 2 c. The emissive properties of the uncoordinated ligands and corresponding complexes have been studied in solution and within organic matrixes of different polarity (polymethylmethacrylate and Zeonex). Room-temperature phosphorescence (RTP) is observed for all gold(I) complexes whereas only fluorescence can be detected for the pure organic chromophore. In particular, the L2 series presents better luminescent properties regarding the intensity of emission, quantum yields, and RTP effect. Additionally, although the inclusion of all the compounds in organic matrixes induces an enhancement of the observed RTP owing to the decrease in non-radiative deactivation, only the L2 series completely suppresses the fluorescence, giving rise to pure phosphorescent materials.

Holistic Approach to the Mechanism Study of Thermal Degradation of Organic Light-Emitting Diode Materials.

The design of stable organic light-emitting diode materials is the key to long lifetime displays under various stressful conditions. Elucidating the degradation mechanism of the materials at the molecular level provides useful information for securing high stability. Previous works based on experiments or computations disclosed only a part of the whole degradation process. Here, we propose a holistic approach to the systematic analysis of the degradation mechanism by combining experimental mass analysis and computation in a semi-automated fashion. The mass analysis identifies molecular weights of feasible products from degradation reactions. Then, the computational analysis goes through initiation, propagation, and termination phases. The initiation phase determines radical fragments and reactive sites, triggering the propagation process. In the propagation phase, we subsequently perform intermediate sampling, reaction network construction, and kinetic analysis. As a proof of concept, this approach was applied to the thermal degradation problem during the sublimation purification process. Two major pathways were successfully elucidated with full atomistic details.

Accurate Vapor Pressure Prediction for Large Organic Molecules: Application to Materials Utilized in Organic Light-Emitting Diodes.

We present a theoretical method based on molecular dynamics (MD) simulations for the prediction of saturated vapor pressure of liquids constituting of large organic molecules at various temperatures. The approach is based on free energy calculations at a fixed temperature and a subsequent Gibbs-Duhem integration over the interval of temperatures. Results of the theoretical approach are compared with experimental measurements for a set of six molecules utilized in organic light-emitting diodes (OLEDs). Good correspondence of theoretical and experimental results suggests the developed methodology as a useful tool in various areas of molecular design, which require prediction of vapor pressures for liquids of large and chemically diverse compounds.

Ancillary ligand increases the efficiency of heteroleptic Ir-based triplet emitters in OLED devices.

The excellent contrast ratio, visibility, and advantages in producing thin and light displays let organic light emitting diodes change the paradigm of the display industry. To improve future display technologies, higher electroluminescence efficiency is needed. Herein, the detailed study of the non-radiative decay mechanism employing density functional theory calculations is carried out and a simple, general strategy for the design of the ancillary ligand is formulated. It is shown that steric bulk properly directed towards the phenylisoquinoline ligands can significantly reduce the non-radiative decay rate.

Luminescent Tetranuclear Gold(I) Dibenzo[g,p]chrysene Derivatives: Effect of the Environment on Photophysical Properties.

A new 2,7,10,15-tetraethynyldibenzo[g,p]chrysene ligand (1) and two tetranuclear gold(I) derivatives containing PPh3 (3) and PMe3 (4) phosphines were synthesized and characterized by 1H and 31P NMR, IR spectroscopy, and high-resolution mass spectrometry. The compounds were studied in order to analyze the effect of the introduction of gold(I) on the supramolecular aggregation and photophysical properties. Absorption and emission spectra displayed broad bands due to the establishment of π π interactions as an indication of intermolecular contacts and the formation of aggregates. A decrease of the recorded quantum yield (QY) of the gold(I) derivatives was observed compared to the uncomplexed ligand. The introduction of the complexes into poly methyl methacrylate (PMMA) and Zeonex 480R matrixes was analyzed, and an increase of the measured QY of 4 in Zeonex was observed. No phosphorescent emission was detected.

Spin-Vibronic Model for Quantitative Prediction of Reverse Intersystem Crossing Rate in Thermally Activated Delayed Fluorescence Systems.

Computationally predicting reverse intersystem crossing (RISC) rates is important for designing new thermally activated delayed fluorescence (TADF) materials. We report a method that can quantitatively predict RISC rates by explicitly considering the spin-vibronic coupling mechanism. The coupling element of the spin-vibronic Hamiltonian is obtained by expanding the spin-orbit and the non-Born-Oppenheimer terms to second order and is then brought into the Golden Rule rate under the Condon approximation. The rate equation is solved directly in the time domain using a correlation function approach. The contributions of the first-order direct spin-orbit coupling and the second-order spin-vibronic coupling to an RISC rate can be quantitatively analyzed in a separate manner. We demonstrate the utility of the method by applying it to a representative TADF system, where we observe that the spin-vibronic portion is substantial but not dominant especially with a relatively small triplet-singlet energy gap. Likewise, our method may elucidate the physical background of efficient nonradiative transitions from the lowest triplet to a higher lying singlet in other purely organic TADF systems, and it will be of great utility toward designing new such molecules.

Enhancing the Kinetic Stability and Lifetime of Organic Light-Emitting Diodes based on Bipolar Hosts by using Spiroconjugation.

We examined how to enhance the lifetime of organic light-emitting diodes (OLEDs) based on bipolar host molecules ET-HT, where ET and HT refer to electron- and hole-transporting units, respectively, by analyzing their thermodynamic and kinetic stabilities. Our DFT calculations reveal that the thermodynamic stability of ET-HT is determined by that of its anion, which is difficult to improve by chemical modifications of ET and HT. The kinetic stability of ET-HT can be enhanced by the spiroconjugation between ET and HT, which occurs when their π-frameworks are extended and have an orthogonal arrangement. Green OLED devices were fabricated by using ET-HTs with and without spiroconjugation, to find that the device with spiroconjugation has a lifetime that is approximately 6 times longer than the one without spiroconjugation.

The Role of Charge Balance and Excited State Levels on Device Performance of Exciplex-based Phosphorescent Organic Light Emitting Diodes.

The design of novel exciplex-forming co-host materials provides new opportunities to achieve high device performance of organic light emitting diodes (OLEDs), including high efficiency, low driving voltage and low efficiency roll-off. Here, we report a comprehensive study of exciplex-forming co-host system in OLEDs including the change of co-host materials, mixing composition of exciplex in the device to improve the performance. We investigate various exciplex systems using 5-(3-4,6-diphenyl-1,3,5-triazin-2-yl)phenyl-3,9-diphenyl-9H-carbazole, 5-(3-4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9-phenyl-9H-3,9'-bicarbazole, and 2-(3-(6,9-diphenyl-9H-carbazol-4-yl)phenyl)-4-phenylbenzo[4,5]thieno[3,2-d]pyrimidine, as electron transporting (ET: electron acceptor) hosts and 9,9'-dipenyl-9H, 9'H-3,3'-bicarbazole and 9-([1,1'-biphenyl]-4-yl)-9'-phenyl-9H,9'H-3,3'-bicarbazole as hole transporting (HT: electron donor) hosts. As a result, a very high current efficiency of 105.1 cd/A at 103 cd/m2 and an extremely long device lifetime of 739 hrs (t95: time after 5% decrease of luminance) are achieved which is one of the best performance in OLEDs. Systematic approach, controlling mixing ratio of HT to ET host materials is suggested to select the component of two host system using energy band matching and charge balance optimization method. Furthermore, our analysis on exciton stability also reveal that lifetime of OLEDs have close relationship with two parameters; singlet energy level difference of HT and ET host and difference of singlet and triplet energy level in exciplex.