Highly Accurate Sequence- and Position-Independent Error Profiling of DNA Synthesis and Sequencing.

A comprehensive error analysis of DNA-stored data during processing, such as DNA synthesis and sequencing, is crucial for reliable DNA data storage. Both synthesis and sequencing errors depend on the sequence and the transition of bases of nucleotides; ignoring either one of the error sources leads to technical challenges in minimizing the error rate. Here, we present a methodology and toolkit that utilizes an oligonucleotide library generated from a 10-base-shifted sequence array, which is individually labeled with unique molecular identifiers, to delineate and profile DNA synthesis and sequencing errors simultaneously. This methodology enables position- and sequence-independent error profiling of both DNA synthesis and sequencing. Using this toolkit, we report base transitional errors in both synthesis and sequencing in general DNA data storage as well as degenerate-base-augmented DNA data storage. The methodology and data presented will contribute to the development of DNA sequence designs with minimal error.

Barcoded multiple displacement amplification for high coverage sequencing in spatial genomics.

Determining mutational landscapes in a spatial context is essential for understanding genetically heterogeneous cell microniches. Current approaches, such as Multiple Displacement Amplification (MDA), offer high genome coverage but limited multiplexing, which hinders large-scale spatial genomic studies. Here, we introduce barcoded MDA (bMDA), a technique that achieves high-coverage genomic analysis of low-input DNA while enhancing the multiplexing capabilities. By incorporating cell barcodes during MDA, bMDA streamlines library preparation in one pot, thereby overcoming a key bottleneck in spatial genomics. We apply bMDA to the integrative spatial analysis of triple-negative breast cancer tissues by examining copy number alterations, single nucleotide variations, structural variations, and kataegis signatures for each spatial microniche. This enables the assessment of subclonal evolutionary relationships within a spatial context. Therefore, bMDA has emerged as a scalable technology with the potential to advance the field of spatial genomics significantly.

Pen-drawn Marangoni swimmer.

Pen-drawing is an intuitive, convenient, and creative fabrication method for delivering emergent and adaptive design to real devices. To demonstrate the application of pen-drawing to robot construction, we developed pen-drawn Marangoni swimmers that perform complex programmed tasks using a simple and accessible manufacturing process. By simply drawing on substrates using ink-based Marangoni fuel, the swimmers demonstrate advanced robotic motions such as polygon and star-shaped trajectories, and navigate through maze. The versatility of pen-drawing allows the integration of the swimmers with time-varying substrates, enabling multi-step motion tasks such as cargo delivery and return to the original place. We believe that our pen-based approach will significantly expand the potential applications of miniaturized swimming robots and provide new opportunities for simple robotic implementations.

Spatial epitranscriptomics reveals A-to-I editome specific to cancer stem cell microniches.

Epitranscriptomic features, such as single-base RNA editing, are sources of transcript diversity in cancer, but little is understood in terms of their spatial context in the tumour microenvironment. Here, we introduce spatial-histopathological examination-linked epitranscriptomics converged to transcriptomics with sequencing (Select-seq), which isolates regions of interest from immunofluorescence-stained tissue and obtains transcriptomic and epitranscriptomic data. With Select-seq, we analyse the cancer stem cell-like microniches in relation to the tumour microenvironment of triple-negative breast cancer patients. We identify alternative splice variants, perform complementarity-determining region analysis of infiltrating T cells and B cells, and assess adenosine-to-inosine base editing in tumour tissue sections. Especially, in triple-negative breast cancer microniches, adenosine-to-inosine editome specific to different microniche groups is identified.

Purification of multiplex oligonucleotide libraries by synthesis and selection.

Complex oligonucleotide (oligo) libraries are essential materials for diverse applications in synthetic biology, pharmaceutical production, nanotechnology and DNA-based data storage. However, the error rates in synthesizing complex oligo libraries can be substantial, leading to increment in cost and labor for the applications. As most synthesis errors arise from faulty insertions and deletions, we developed a length-based method with single-base resolution for purification of complex libraries containing oligos of identical or different lengths. Our method-purification of multiplex oligonucleotide libraries by synthesis and selection-can be performed either step-by-step manually or using a next-generation sequencer. When applied to a digital data-encoded library containing oligos of identical length, the method increased the purity of full-length oligos from 83% to 97%. We also show that libraries encoding the complementarity-determining region H3 with three different lengths (with an empirically achieved diversity >106) can be simultaneously purified in one pot, increasing the in-frame oligo fraction from 49.6% to 83.5%.

Photopatterned microswimmers with programmable motion without external stimuli.

We introduce highly programmable microscale swimmers driven by the Marangoni effect (Marangoni microswimmers) that can self-propel on the surface of water. Previous studies on Marangoni swimmers have shown the advantage of self-propulsion without external energy source or mechanical systems, by taking advantage of direct conversion from power source materials to mechanical energy. However, current developments on Marangoni microswimmers have limitations in their fabrication, thereby hindering their programmability and precise mass production. By introducing a photopatterning method, we generated Marangoni microswimmers with multiple functional parts with distinct material properties in high throughput. Furthermore, various motions such as time-dependent direction change and disassembly of swimmers without external stimuli are programmed into the Marangoni microswimmers.

Direct 2D-to-3D transformation of pen drawings.

Pen drawing is a method that allows simple, inexpensive, and intuitive two-dimensional (2D) fabrication. To integrate such advantages of pen drawing in fabricating 3D objects, we developed a 3D fabrication technology that can directly transform pen-drawn 2D precursors into 3D geometries. 2D-to-3D transformation of pen drawings is facilitated by surface tension-driven capillary peeling and floating of dried ink film when the drawing is dipped into an aqueous monomer solution. Selective control of the floating and anchoring parts of a 2D precursor allowed the 2D drawing to transform into the designed 3D structure. The transformed 3D geometry can then be fixed by structural reinforcement using surface-initiated polymerization. By transforming simple pen-drawn 2D structures into complex 3D structures, our approach enables freestyle rapid prototyping via pen drawing, as well as mass production of 3D objects via roll-to-roll processing.

Shear Stress-Triggered Deformation of Microparticles in a Tapered Microchannel.

We demonstrate that it is possible to produce microparticles with high deformability while maintaining a high effective volume. For significant particle deformation, a particle must have a void region. The void fraction of the particle allows its deformation under shear stress. Owing to the importance of the void fraction in particle deformation, we defined an effective volume index (V*) that indicates the ratio of the particle's total volume to the volumes of the void and material structures. We chose polyethylene glycol diacrylate (Mn ~ 700) for the fabrication of the microparticles and focused on the design of the particles rather than the intrinsic softness of the material (E). We fabricated microparticles with four distinct shapes: discotic, ring, horseshoe, and spiral, with various effective volume indexes. The microparticles were subjected to shear stress as they were pushed through a tapered microfluidic channel to measure their deformability. The deformation ratio R was introduced as R = 1-Wdeformed/Doriginal to compare the deformability of the microparticles. We measured the deformation ratio by increasing the applied pressure. The spiral-shaped microparticles showed a higher deformation ratio (0.901) than those of the other microparticles at the same effective volume index.

DNA Micro-Disks for the Management of DNA-Based Data Storage with Index and Write-Once-Read-Many (WORM) Memory Features.

DNA-based data storage has attracted attention because of its higher physical density of the data and longer retention time than those of conventional digital data storage. However, previous DNA-based data storage lacked index features and the data quality of storage after a single access was not preserved, obstructing its industrial use. Here, DNA micro-disks, QR-coded micro-sized disks that harbor data-encoded DNA molecules for the efficient management of DNA-based data storage, are proposed. The two major features that previous DNA-based data-storage studies could not achieve are demonstrated. One feature is accessing data items efficiently by indexing the data-encoded DNA library. Another is achieving write-once-read-many (WORM) memory through the immobilization of DNA molecules on the disk and their enrichment through in situ DNA production. Through these features, the reliability of DNA-based data storage is increased by allowing selective and multiple accession of data-encoded DNA with lower data loss than previous DNA-based data storage methods.

Cell-Free Bacteriophage Genome Synthesis Using Low-Cost Sequence-Verified Array-Synthesized Oligonucleotides.

Synthesizing engineered bacteriophages (phages) for human use has potential in various applications ranging from drug screening using a phage display to clinical use using phage therapy. However, the engineering of phages conventionally involves the use of an in vivo system that has low production efficiency because of high virulence against the host and low transformation efficiency. To circumvent these issues, de novo phage genome synthesis using chemically synthesized oligonucleotides (oligos) has increased the potential for engineering phages in a cell-free system. Here, we present a cell-free, low-cost, de novo gene synthesis technology called Sniper assembly for phage genome construction. With massively parallel sequencing of microarray-synthesized oligos, we generated and identified approximately 100 000 clonal DNA clusters in vitro and 5000 error-free ones in a cell-free environment. To demonstrate its practical application, we synthesized the Acinetobacter phage AP205 genome (4268 bp) using 65 sequence-verified DNA clones. Compared to previous reports, Sniper assembly lowered the genome synthesis cost ($0.0137/bp) by producing low-cost sequence-verified DNA.

OPENchip: an on-chip in situ molecular profiling platform for gene expression analysis and oncogenic mutation detection in single circulating tumour cells.

Liquid biopsy holds promise towards practical implementation of personalized theranostics of cancer. In particular, circulating tumour cells (CTCs) can provide clinically actionable information that can be directly linked to prognosis or therapy decisions. In this study, gene expression patterns and genetic mutations in single CTCs are simultaneously analysed by strategically combining microfluidic technology and in situ molecular profiling technique. Towards this, the development and demonstration of the OPENchip (On-chip Post-processing ENabling chip) platform for single CTC analysis by epithelial CTC enrichment and subsequent in situ molecular profiling is reported. For in situ molecular profiling, padlock probes that identify specific desired targets to examine biomarkers of clinical relevance in cancer diagnostics were designed and used to create libraries of rolling circle amplification products. We characterize the OPENchip in terms of its capture efficiency and capture purity, and validate the probe design using different cell lines. By integrating the obtained results, molecular analyses of CTCs from metastatic breast cancer (HER2 (ERBB2) gene expression and PIK3CA mutations) and metastatic pancreatic cancer (KRAS gene mutations) patients were demonstrated without any off-chip processes. The results substantiate the potential implementation of early molecular detection of cancer through sequencing-free liquid biopsy.

High information capacity DNA-based data storage with augmented encoding characters using degenerate bases.

DNA-based data storage has emerged as a promising method to satisfy the exponentially increasing demand for information storage. However, practical implementation of DNA-based data storage remains a challenge because of the high cost of data writing through DNA synthesis. Here, we propose the use of degenerate bases as encoding characters in addition to A, C, G, and T, which augments the amount of data that can be stored per length of DNA sequence designed (information capacity) and lowering the amount of DNA synthesis per storing unit data. Using the proposed method, we experimentally achieved an information capacity of 3.37 bits/character. The demonstrated information capacity is more than twice when compared to the highest information capacity previously achieved. The proposed method can be integrated with synthetic technologies in the future to reduce the cost of DNA-based data storage by 50%.

Design and Synthesis of a Reconfigurable DNA Accordion Rack.

DNA nanostructure-based mechanical systems or DNA nanomachines, which produce complex nanoscale motion in 2D and 3D in the nanometer to ångström resolution, show great potential in various fields of nanotechnology such as the molecular reactors, drug delivery, and nanoplasmonic systems. The reconfigurable DNA accordion rack, which can collectively manipulate a 2D or 3D nanoscale network of elements, in multiple stages in response to the DNA inputs, is described. The platform has potential to increase the number of elements that DNA nanomachines can control from a few elements to a network scale with multiple stages of reconfiguration. In this protocol, we describe the entire experimental process of the reconfigurable DNA accordion rack of 6 by 6 meshes. The protocol includes a design rule and simulation procedure of the structures and a wet-lab experiment for synthesis and reconfiguration. In addition, analysis of the structure using TEM (transmission electron microscopy) and FRET (fluorescence resonance energy transfer) is included in the protocol. The novel design and simulation methods covered in this protocol will assist researchers to use the DNA accordion rack for further applications.

A Reconfigurable DNA Accordion Rack.

DNA nanostructure-based mechanical systems that control the distance between elements of interest have demonstrated great potential for various applications, including nanoplasmonic systems, molecular reactors, and other nanotechnology platforms. However, previously reported systems could not collectively manipulate a 2D or 3D nanoscale network of elements to various forms in multiple stages. A reconfigurable DNA accordion rack structure is introduced that is a DNA beam lattice that changes its conformation with a small amount of short-length DNA locks as the controlling input. The lattice shape of the 2D DNA accordion rack and the diameter and the height of the 3D DNA nanotubular structure made of the DNA accordion rack could be controlled. Furthermore, by sequentially repeating the detachment and the attachment of the different DNA locks using strand displacement, the shape reconfiguration was repeatedly carried out.