ABSTRACT
The synthesis of Polypyrrole (PPy)/TiO2/ZnO composites involved a chemical oxidative polymerization process, wherein the addition of TiO2/ZnO was varied from 1 to 10 wt%. The composites' photocatalytic capabilities, supercapacitor performance, and potential use as a nitrite sensor were thoroughly assessed, alongside investigations into their photoluminescence (PL) and morphological characteristics. The strong interaction between TiO2/ZnO and PPy was confirmed using FTIR, UV-Vis, and PL spectroscopy techniques. The composites demonstrated aggregated and spherical-shaped morphological features investigated by FESEM. Such morphological structures of the composites were distinct from the TiO2/ZnO (rod-like) and similar to PPy structure (spherical). However, such composites showed dominating spherical-shaped morphology ensuring a diameter in the range of 50-200 nm. The PPy/TiO2/ZnO composites exhibited significantly enhanced photocatalytic efficiency in methylene blue (MB) removal, achieving a range of 88-93% compared to PPy alone, which only achieved 77.2% MB removal. The Cyclic Voltammetry (CV) data exhibited a promising hybrid supercapacitor performance of the composites with a high capacitance value, good energy density, as well as an excellent power density. The fabricated supercapacitor was capable of lightened up a single red 5 mm LED for a few minutes, indicating the commendable energy storage capacity. A newly developed PPy/TiO2/ZnO composite is potentially used to develop as a sensor probe for the detection of nitrite chemicals using the linear sweep voltammetry (LSV) technique in three electrodes system in room conditions. It is found an excellent sensor results in terms of sensitivity as well as detection limit and satisfactory results when validated with the real samples. These results offer novel insights into the fabrication of PPy/TiO2/ZnO photocatalysts for addressing organic waste treatment, while also presenting promising prospects for potential applications in supercapacitors and sensors.
ABSTRACT
l-Glutamic acid/ZnS (L-GA/ZnS) composites were prepared by varying the amount of ZnS addition ranging from 1-5 wt% by means of an easy solvent casting approach. The morphological investigation, antimicrobial activity, photocatalytic enactment, and electrochemical properties of the composites were evaluated. The formation of L-GA/ZnS composites was confirmed by FTIR, UV-Vis, and photoluminescence (PL) spectroscopy. Besides, FTIR, UV-Visible, and PL data revealed the possible incorporation of ZnS into L-GA. The L-GA/ZnS composites demonstrated similar plate-like structure of L-GA with agglomerated ZnS morphology on the plate surface with diameter in the range of 50-500 nm, confirmed by FESEM/EDS measurements. The prepared composites showed excellent photocatalytic depiction towards methylene blue (MB) degradation in comparison to L-GA and ZnS. A set of supercapacitor devices were fabricated using L-GA/ZnS composites. The performance of the supercapacitor was assessed by GCD and exhibited good energy storage capacity. The prepared composites showed promising prospects for hybrid supercapacitor application. These outcomes may offer new insight into the fabrication of L-GA/ZnS composites as photocatalysts for organic contaminants treatment.