In Situ Characterization Techniques for Electrochemical Nitrogen Reduction Reaction.

The electrochemical reduction of nitrogen to produce ammonia is pivotal in modern society due to its environmental friendliness and the substantial influence that ammonia has on food, chemicals, and energy. However, the current electrochemical nitrogen reduction reaction (NRR) mechanism is still imperfect, which seriously impedes the development of NRR. In situ characterization techniques offer insight into the alterations taking place at the electrode/electrolyte interface throughout the NRR process, thereby helping us to explore the NRR mechanism in-depth and ultimately promote the development of efficient catalytic systems for NRR. Herein, we introduce the popular theories and mechanisms of the electrochemical NRR and provide an extensive overview on the application of various in situ characterization approaches for on-site detection of reaction intermediates and catalyst transformations during electrocatalytic NRR processes, including different optical techniques, X-ray-based techniques, electron microscopy, and scanning probe microscopy. Finally, some major challenges and future directions of these in situ techniques are proposed.

Cyclotriphosphazene: A Versatile Building Block for Diverse Functional Materials.

Cyclotriphosphazene (CP) is a cyclic inorganic compound with the chemical formula N3P3. This unique molecule consists of a six-membered ring composed of alternating nitrogen and phosphorus atoms, each bonded to two chlorine atoms. CP exhibits remarkable versatility and significance in the realm of materials chemistry due to its easy functionalization via facile nucleophilic substitution reactions in mild conditions as well as intriguing properties of resultant final CP-based molecules or polymers. CP has been served as an important building block for numerous functional materials. This review provides a general and broad overview of the synthesis of CP-based small molecules through nucleophilic substitution of hexachlorocyclotriphosphazene (HCCP), and their applications, including flame retardants, liquid crystals (LC), chemosensors, electronics, biomedical materials, and lubricants, have been summarized and discussed. It would be expected that this review would offer a timely summary of various CP-based materials and hence give an insight into further exploration of CP-based molecules in the future.

Electrofluorochromic Switching of Heat-Induced Cross-Linkable Multi-Styryl-Terminated Triphenylamine and Tetraphenylethylene Derivatives.

High-performance electrochromic (EC) and electrofluorochromic (EFC) materials have garnered considerable interest due to their diverse applications in smart windows, optoelectronics, optical displays, military camouflage, etc. While many different EC and EFC polymers have been reported, their preparation often requires multiple steps, and their polymer molecular weights are subjected to batch variation. In this work, we prepared two triphenylamine (TPA)-based and two tetraphenylethylene (TPE)-based derivatives functionalized with terminal styryl groups via direct Suzuki coupling with (4-vinylphenyl)boronic acid and vinylboronic acid pinacol ester. The two novel TPE derivatives exhibited green-yellow aggregation-induced emission (AIE). The EC and EFC properties of pre- and post-thermally treated derivatives spin-coated onto ITO-glass substrates were studied. While all four derivatives showed modest absorption changes with applied voltages up to +2.4 V, retaining a high degree of optical transparency, they exhibited obvious EFC properties with the quenching of blue to yellow fluorescence with IOFF/ON contrast ratios of up to 7.0. The findings therefore demonstrate an elegant approach to preparing optically transparent, heat-induced, cross-linkable styryl-functionalized EFC systems.

Strategies to Enhance the Electrochromic Properties of Conjugated Polymers Bearing Pyromellitic Diimide Acceptors.

A series of conjugated polymers bearing thiophene-based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin-film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange-red-to-green colour switching. On this basis, two more random co-polymers containing higher donor-to-acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI-to-thiophene ratio of ca. 1 : 7 and 1 : 8, revealed orange red-to-blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra-red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC-active conjugated polymers, and considerations for future tuning of colour and switching performances.

Enhancing the photocatalytic upcycling of polystyrene to benzoic acid: a combined computational-experimental approach for acridinium catalyst design.

Converting polystyrene into value-added oxygenated aromatic compounds is an attractive end-of-life upcycling strategy. However, identification of appropriate catalysts often involves laborious and time-consuming empirical screening. Herein, after demonstrating the feasibility of using acridinium salts for upcycling polystyrene into benzoic acid by photoredox catalysis for the first time, we applied low-cost descriptor-based combinatorial in silico screening to predict the photocatalytic performance of a family of potential candidates. Through this approach, we identified a non-intuitive fluorinated acridinium catalyst that outperforms other candidates for converting polystyrene to benzoic acid in useful yields at low catalyst loadings (≤5 mol%). In addition, this catalyst also proved effective with real-life polystyrene waste containing dyes and additives. Our study underscores the potential of computer-aided catalyst design for valorizing polymeric waste into essential chemical feedstock for a more sustainable future.

Hydrolytic degradation and biodegradation of polylactic acid electrospun fibers.

Increased use of bioplastics, such as polylactic acid (PLA), helps in reducing greenhouse gas emissions, decreases energy consumption and lowers pollution, but its degradation efficiency has much room for improvement. The degradation rate of electrospun PLA fibers of varying diameters ranging from 0.15 to 1.33 µm is measured during hydrolytic degradation under different pH from 5.5 to 10, and during aerobic biodegradation in seawater supplemented with activated sewage sludge. In hydrolytic conditions, varying PLA fiber diameter had significant influence over percentage weight loss (W%L), where faster degradation was achieved for PLA fibers with smaller diameter. W%L was greatest for PLA-5 > PLA-12 > PLA-16 > PLA-20, with average W%L at 30.7%, 27.8%, 17.2% and 14.3% respectively. While different pH environment does not have a significant influence on PLA degradation, with W%L only slightly higher for basic environments. Similarly biodegradation displayed faster degradation for small diameter fibers with PLA-5 attaining the highest degree of biodegradation at 22.8% after 90 days. Hydrolytic degradation resulted in no significant structural change, while biodegradation resulted in significant hydroxyl end capping products on the PLA surface. Scanning electron microscopy (SEM) imaging of degraded PLA fibers showed a deteriorated morphology of PLA-5 and PLA-12 fibers with increased adhesion structures and irregularly shaped fibers, while a largely unmodified morphology for PLA-16 and PLA-20.