Exceptionally Fast Temperature-Responsive, Mechanically Strong and Extensible Monolithic Non-Porous Hydrogels: Poly(N-isopropylacrylamide) Intercalated with Hydroxypropyl Methylcellulose.

Exceptionally fast temperature-responsive, mechanically strong, tough and extensible monolithic non-porous hydrogels were synthesized. They are based on divinyl-crosslinked poly(N-isopropyl-acrylamide) (PNIPAm) intercalated by hydroxypropyl methylcellulose (HPMC). HPMC was largely extracted after polymerization, thus yielding a 'template-modified' PNIPAm network intercalated with a modest residue of HPMC. High contents of divinyl crosslinker and of HPMC caused a varying degree of micro-phase-separation in some products, but without detriment to mechanical or tensile properties. After extraction of non-fixed HPMC, the micro-phase-separated products combine superior mechanical properties with ultra-fast T-response (in 30 s). Their PNIPAm network was highly regular and extensible (intercalation effect), toughened by hydrogen bonds to HPMC, and interpenetrated by a network of nano-channels (left behind by extracted HPMC), which ensured the water transport rates needed for ultra-fast deswelling. Moreover, the T-response rate could be widely tuned by the degree of heterogeneity during synthesis. The fastest-responsive among our hydrogels could be of practical interest as soft actuators with very good mechanical properties (soft robotics), while the slower ones offer applications in drug delivery systems (as tested on the example of Theophylline), or in related biomedical engineering applications.

Donor-Acceptor Copolymers with 9-(2-Ethylhexyl)carbazole or Dibenzothiophene-5,5-dioxide Donor Units and 5,6-Difluorobenzo[c][1,2,5]thiadiazole Acceptor Units for Photonics.

Semiconducting polymers, particularly of the third generation, including donor-acceptor (D-A) copolymers, are extensively studied due to their huge potential for photonic and electronic applications. Here, we report on two new D-A copolymers, CP1 and CP2, composed of different electron-donor (D) units: 9-(2-ethylhexyl)carbazole or dibenzothiophene-5,5-dioxide, respectively, and of 4,7-bis(4'-(2-octyldodecyl)thiophen-2'-yl)-5,6-difluorobenzo[c][1,2,5]thiadiazole building block with central 5,6-difluorobenzo[c][1,2,5]thiadiazole electron-acceptor (A) units, which were synthesized by Suzuki coupling in the high-boiling solvent xylene and characterized. The copolymers exhibited very good thermal and oxidation stability. A copolymer CP1 with different molecular weights was prepared in order to facilitate a comparison of CP1 with CP2 of comparable molecular weight and to reveal the relationship between molecular weight and properties. The photophysical, electrochemical, and electroluminescence properties were examined. Intense red photoluminescence (PL) with higher PL efficiencies for CP1 than for CP2 was observed in both solutions and films. Red shifts in the PL thin film spectra compared with the PL solution spectra indicated aggregate formation in the solid state. X-ray diffraction measurements revealed differences in the arrangement of molecules in thin films depending on the molecular weight of the copolymers. Light-emitting devices with efficient red emission and low onset voltages were prepared and characterized.

Carbazole-Fluorene Copolymers with Various Substituents at the Carbazole Nitrogen: Structure-Properties Relationship.

Carbazole derivatives, carbazole-containing polymers and iridium complexes are of interest due to many possible applications in photonics, electronics and biology, particularly as active or hole-transporting layers in organic as well as perovskite devices due to their interesting properties. Here, a series of carbazole-fluorene conjugated copolymers with various substituents at the N-carbazole position (2-methoxycarbonylethyl, 2-carboxyethyl, 2-ethylhexyl, and nonan-2,4-dionatoiridium(III)bis(2-phenylpyridine-N,C2')-9-yl) was prepared by Suzuki coupling. Their photophysical, electrochemical and electroluminescence (EL) properties were studied. Effects of molecular weight and substituents attached to carbazole unit on their properties are reported. The carbazole-fluorene copolymers in dilute solutions exhibited intense photoluminescence (PL) emission in the blue spectral region with high PL quantum yields (78-87%) except for the copolymer with the iridium complex (23%). Similar PL spectra were observed in dilute solutions. More pronounced differences were found in thin film PL and EL properties due to excimer/aggregate formation. Light-emitting devices (LEDs) made of copolymers with 2-ethylhexyl as N-carbazole substituent exhibited efficient EL emission with the best performance and the lowest EL onset voltages (3-4 V), while the LEDs made of copolymers with other substituents were not as efficient, but showed anomalous behavior and memory effects in current-voltage characteristics promising also for bio-inspired electronics.

Effects of the Donor Unit on the Formation of Hybrid Layers of Donor-Acceptor Copolymers with Silver Nanoparticles.

Donor-acceptor (D-A) copolymers containing perylene-3,4,9,10-tetracarboxydiimide (PDI) electron-acceptor (A) units belonging to n-type semiconductors are of interest due to their many potential applications in photonics, particularly for electron-transporting layers in all-polymeric or perovskite solar cells. Combining D-A copolymers and silver nanoparticles (Ag-NPs) can further improve material properties and device performances. Hybrid layers of D-A copolymers containing PDI units and different electron-donor (D) units (9-(2-ethylhexyl)carbazole or 9,9-dioctylfluorene) with Ag-NPs were prepared electrochemically during the reduction of pristine copolymer layers. The formation of hybrid layers with Ag-NP coverage was monitored by in-situ measurement of absorption spectra. The Ag-NP coverage of up to 41% was higher in hybrid layers made of copolymer with 9-(2-ethylhexyl)carbazole D units than in those made of copolymer with 9,9-dioctylfluorene D units. The pristine and hybrid copolymer layers were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy, which proved the formation of hybrid layers with stable Ag-NPs in the metallic state with average diameters <70 nm. The influence of D units on Ag-NP diameters and coverage was revealed.

Formamidinium Lead Iodide Perovskite Thin Films Formed by Two-Step Sequential Method: Solvent-Morphology Relationship.

Thin films made of formamidinium lead iodide (FAPbI3) perovskites prepared by a two-step sequential deposition method using various solvents for formamidinium iodide (FAI) - isopropanol, n-butanol and tert-butanol, were studied with the aim of finding a correlation between morphology and solvent properties to improve film quality. They were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) and their photophysical properties were studied by means of absorption and photoluminescence (PL) spectroscopies. XRD patterns, absorption and PL spectra proved α-phase formation for all selected solvents. An excessive amount of PbI2 found in perovskite films prepared with n-butanol indicates incomplete conversion. Thin film morphology, such as grain and crystallite size, depended on the solvent. Using tert-butanol, thin films with a very large grain size of up to several micrometers and with preferred crystallite orientation were fabricated. The grain size increased as follows: 0.2-0.5, 0.2-1 and 2-5 µm for isopropanol, n-butanol and tert-butanol, respectively. A correlation between the grain size and viscosity, electric permittivity and polarizability of the solvent could be considered. Our results, including fabrication of perovskite films with large grains and fewer grain boundaries, are important and of interest for many optoelectronic applications.

Hybrid Layers of Donor-Acceptor Copolymers with Homogenous Silver Nanoparticle Coverage for Photonic Applications.

Hybrid layers of donor-acceptor (D-A) copolymers containing N,N'-dialkylperylene-3,4,9,10-tetracarboxydiimide electron-acceptor units covered with silver nanoparticles (Ag-NPs) were prepared by electrochemical doping of pristine layers during reduction processes. In situ optical absorption spectra of the layers were recorded during the formation of Ag-NP coverage. The hybrid layers were characterized by absorption spectroscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDX). In the absorption spectra of the hybrid layers, a surface plasmon band characteristic of Ag-NPs appeared. Significant improvements in light absorption due to the plasmonic effects of Ag NPs were observed. Stable Ag-NPs with an average diameter of 41-63 nm were formed on the surface, as proven by SEM and XPS. The Ag-NP coverage and size depended on the hybrid layer preparation conditions and on the copolymer composition. The metallic character of the Ag-NPs was proven by XPS. The location in the surface layer was further confirmed by EDX analysis. To the best of our knowledge, this is the first report on such hybrid layers having the potential for a variety of photonic and electronic applications.

Monolithic intercalated PNIPAm/starch hydrogels with very fast and extensive one-way volume and swelling responses to temperature and pH: prospective actuators and drug release systems.

Remarkable monolithic (non-porous) hydrogels based on poly(NIPAm-co-sodium methacrylate) intercalated by starch were prepared, and were found to display very fast and extensive one-way solvent (water) release, induced by both pH and temperature. With centimeter-sized 3D specimens, the achieved response times were as short as 4 min (for 70% water release), in combination with very large volume responses (shrinking ratios up to 15). The response time can be tuned from minutes, over tens of minutes, up to hours. The pH-induced deswelling is always slower than the temperature-induced one, but at the highest starch content, ca. 5.5 min are needed for 70% completion of the pH-triggered process. Simultaneous temperature- and pH-stimuli expectedly also lead to very fast water release. The unique intercalated structure and the temperature-dependent hydrogen bridging between the intercalated phases, as well as between these phases and water, were found to play the key role in the ability of the gels to rapidly release water and shrink, which was deeper elucidated in this work. The hydrogels are of interest as soft actuators, but also for chemical release systems or for drug release applications. The latter was successfully tested with theophylline as the drug.

Poly[(arylene ethynylene)-alt-(arylene vinylene)]s Based on Anthanthrone and Its Derivatives: Synthesis and Photophysical, Electrochemical, Electroluminescent, and Photovoltaic Properties.

Anthanthrone and its derivatives are large polycyclic aromatic compounds (PACs) that pose a number of challenges for incorporation into the structure of soluble conjugated polymers. For the first time, this group of PACs was employed as the building blocks for the synthesis of copolymers (P1-P5) based on poly[(arylene ethynylene)-alt-(arylene vinylene)]s backbone (-Ph-C≡C-Anth-C≡C-Ph-CH=CH-Ph-CH=CH-) n . During the synthesis of P1-P5, different alkyloxy side chains were incorporated in order to tune the properties of the polymers. Of the copolymer series only P1 (containing anthanthrone and branched 2-ethylhexyloxy side chains on phenylenes), P2 and P3 (for which the anthanthrones containing carbonyl groups were converted to anthanthrene containing alkyloxy substituents) were soluble. The photophysical, electrochemical, electroluminescent and photovoltaic properties of P1-P3 are reported, compared and discussed with respect to the effects of side chains.

Synthesis and Photophysical and Electroluminescent Properties of Poly(1,4-phenylene-ethynylene)-alt-poly(1,4-phenylene-vinylene)s with Various Dissymmetric Substitution of Alkoxy Side Chains.

The synthesis and characterization of a set of conjugated polymers, poly(1,4-phenylene-ethynylene)-alt-poly(1,4-phenylene-vinylene)s (PPE-PPVs), with a dissymmetrical configuration (partial or total) of alkoxy side chains is reported. Five new polymers bearing octyloxy and/or octadecyloxy side chains at the phenylene-ethynylene and phenylene-vinylene segments, respectively, were obtained. Two symmetrical substituted polymers were used for comparison. Polymers with weight-average molecular weight, Mw, up to 430 000 g/mol and degree of polymerization between 17 and 322 were obtained by a Horner-Wadsworth-Emmons olefination polycondensation reaction of the respective luminophoric dialdehydes and bisphosphonates. As expected, identical conjugated backbones in all polymers results in very similar photophysical response in dilute solution, with high fluorescence quantum yields between 50% and 80%. In contrast, the thin film properties are dependent on the combinatorial effects of side chain configuration, molecular weight, and film thickness parameters, which are the basis of the resulting comparison and discussion.

Synthesis, structure, and opto-electronic properties of organic-based nanoscale heterojunctions.

Enormous research effort has been put into optimizing organic-based opto-electronic systems for efficient generation of free charge carriers. This optimization is mainly due to typically high dissociation energy (0.1-1 eV) and short diffusion length (10 nm) of excitons in organic materials. Inherently, interplay of microscopic structural, chemical, and opto-electronic properties plays crucial role. We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties. By adjusting parameters of contact- and tapping-mode atomic force microscopy (AFM), we perform morphologic and mechanical characterizations (nanoshaving) of organic layers, measure their electrical conductivity by current-sensing AFM, and deduce work functions and surface photovoltage (SPV) effects by Kelvin force microscopy using high spatial resolution. These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data. We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond.

π-Conjugated Donor and Donor-Acceptor Metallo-Polymers.

Two zinc(II)- and two ruthenium(II) containing π-conjugated metallo-polymers were synthesized and characterized in detail. We could prove by SEC, analytical ultracentrifugation (AUC) and viscosimetry the ruthenium(II) metallo-polymers to be high molar mass materials (M(fs) = 20 000 g · mol(-1) Ru1-2; M(fs) = 34 000 g · mol(-1) Ru1) exhibiting intrinsic viscosities of up to [η] = 192 · cm(3) · g(-1) . Applying spin-coating we produced homogeneous films of the polymers and could, subsequently, investigate the photophysical properties in the solid state. Introducing the Ru(II) metallo-polymers mixed with PCBM[60] as photoactive layer in bulk-heterojunction solar cells resulted in very low efficiencies due to morphology problems.

An investigation of the photoinduced changes of absorption of high-performance photoaddressable polymers.

Recently, a novel class of photoaddressable polymers (PAPs) has been reported, which allows for reversible photorecording with values of the photoinduced birefringence in excess of 0.2. These polymers are copolymers of methacrylate-type monomers with a mesogenic and a nonmesogEnic photoactive azobenzene in the side chain. This report presents a detailed analysis of the three-dimensional photoinduced reorientation of side chains within thin layers of PAP materials, utilizing polarized UV/Visible spectroscopy, infrared, and photothermal deflection spectroscopy (PDS). The three-dimensional orientation distribution before and after illumination with 514 nm polarized light was investigated by angle-dependent UV/Vis absorption spectroscopy. As-prepared samples possess an uniaxial orientation with the photoactive units being preferentially aligned within the plane of the substrate layer. These films become biaxial upon photoalignment with polarized light incident normal to the substrate plane. For PAP materials containing mesogenic side chains, the out-of-plane absorption stays nearly unchanged, proving that the photoinduced reorientation occurs mainly within the layer plane. For a homopolymer bearing only a nonmesogenic azobenzene in the side chain, photobleaching is observed, associated with a disease in absorption in all three principle directions. This finding can be understood in terms of an orientational coupling between the photodegradation product and the active azobenzene units. Photodegradation was well established by infrared spectroscopy. Photothermal deflection spectroscopy has been performed to manifest photoinduced changes in the transparent wavelength region of the PAP material, below the absorption edge. In contrast to the pronounced optical changes in the UV/Vis and IR spectra, the absorption in this range remains nearly unchanged. This result provides evidence that the polymers can be well applied for holographic storage in thick-layer devices.