ABSTRACT
Many heteroacenes have been extensively studied to improve device performances; however, the morphological effects stemmed from the chemical modification on a multiscale remain less explored. In this research, five axisymmetric S,N-heteropentacenes (DTPT, DTPT-Ph, DTPT-CN, DTPT-PYCN, and DTPT-BTCN) are studied to reveal the influences of molecular symmetry and end-capping substituents on the structure-property relationship, the thermal stability, crystallization behavior, film morphology, and OFET performance. Phase behavior was probed by differential scanning calorimetry (DSC), while the quality of the crystal array and structural details was investigated by optical microscopy (OM) and grazing-incidence wide-angle X-ray scattering (GIWAXS). The analytic results reveal that (1) the parent axisymmetric S,N-heteropentacene, DTPT, is hard to crystallize, which hinders the preparation of high-quality crystal arrays for the OFET application. (2) The incorporation of π-conjugated electron-withdrawing (π-EW) endcaps that provide extended conjugation length and enhanced molecular polarity is required to form oriented crystal arrays to deliver reasonable OFET characteristics. (3) The π-EW endcaps with conformational freedom, such as -BTCN, due to the asymmetric feature of benzothiadiazole (BT), can hinder bulk phase crystallization and cause conformational disorder in the crystal array. Hence, the tradeoff of introducing the end-substituents to reinforce the poor crystalline nature of S,N-heteroacenes should be carefully considered.
ABSTRACT
The physical properties, packing, morphology, and semiconducting performance of a planar π-conjugated system can be effectively modified by introducing side chains and substituent groups, both of which can be complementary to the π framework in changing the intermolecular association, frontier molecular orbital energy, optical band gap, and others. We herein show that installation of end-capped electron-withdrawing groups (EWGs), such as dicyanovinyl (-DCV), 3-ethylrhodanine (-RD), and 2-(3-oxo-indan-1-ylidene)-malononitrile (-INCN), together with siloxane side chains to the backbones of dithienyldiketopyrrolopyrrole (DPPT), such as DPPT-Si-DCV, DPPT-Si-RD, and DPPT-Si-INCN, can greatly improve its solubility, air stability, and film morphology to serve as an n-channel in thin-film transistor fabrication. The EWGs attached to the DPPT core narrowed the optical band gap (Egopt) and changed the highest occupied molecular orbital and the lowest unoccupied molecular orbital energies (EHOMO and ELUMO), making them suitable for n-channel field-effect transistor (FET) applications. The benefits of introducing siloxane side chains to the DPPT core include enhanced solubility, low crystallization barrier, enantiotropic phase behavior, and much improved FET performance. The DPPT-Si-INCN film displayed low-lying HOMO (-5.82 eV) and LUMO (-4.60 eV) energy levels and an optical band gap as low as 1.22 eV, all of which suggest that this derivative can be quite resistant toward aerial oxidation. Thin films of these derivatives were prepared by the solution-shear method. A comparison of the solution-sheared films indicated that the molecular packing motif of DPPT-Si-INCN film was somehow different from that of DPPT-Si-DCV and DPPT-Si-RD, in which the π-π stacking tended to align orthogonally to the shearing direction. This specific π-π stacking alignment could have an impact on the electron mobility (µe) values in transistors based on the solution-sheared films.
ABSTRACT
Although chemical modifications on conjugated molecules are widely applied for the purpose of improving processability and device performances, the effect of the modification was far less investigated. Here, five S, N-hexacenes are studied to reveal the influences of (1) the lateral alkyl chain, (2) the terminal group (thiophene vs benzene), and (3) the end-capping phenyl group of the hexacenes on the morphology and organic field-effect transistor (OFET) performances. Crystal arrays of the hexacenes were prepared via polydimethylsiloxane (PDMS)-assisted crystallization (PAC) prior to morphological and OFET characterizations. The lattice structures and crystal quality of the hexacenes were evaluated by microscopy and diffraction techniques including single-crystal diffractometer, electron diffraction, and grazing incidence wide-angle X-ray scattering. The systematic analyses led to the following conclusions: (1) the bulkier alkyl side chain assists to form more densely packed crystals with less structural defects; (2) the terminal thiophene rings bring about higher-lying EHOMO, more ordered phase, and crystal orientation, whereas the terminal benzene rings deteriorate the structural order of the active layer and result in the liquid crystal phase; and (3) the phenyl end caps ameliorate the morphological order, intermolecular overlapping, thermal stability and elevate EHOMO. Thus, EH-DTPTt-Ph delivers the highest µh, contributing to high-lying EHOMO, well-oriented crystal array with a longer correlation length, and suitable lattice orientation. This systematic research provides the aspects about the effects of the functionalized S, N-hexacenes on the morphology and OFET characteristics, which is anticipated to be useful for the molecular design of heteroacenes.
ABSTRACT
Here, two diketopyrrolopyrrole (DPP)-based oligomers, DPP-4T and DPP-6T, are studied to reveal the influences of conjugation length on thin-film morphology and organic field-effect transistor (OFET) performances. PDMS-assisted crystallization in a solvent-annealing chamber is applied to prepare crystal arrays of DPP-4T and DPP-6T to optimize the quality of charge channels for OFET characterizations. To deliver insights into microstructure and morphology of thin films, a characterization procedure for determining molecular packing in thin film and crystallinity of the crystal arrays is presented via grazing incidence wide-angle X-ray scattering, electron diffraction, and lattice simulation software package (Cerius2). With the lattice parameters derived from analyses of grazing incidence wide-angle X-ray scattering (GIWAXS) and electron diffraction (ED), the lattice modeling results indicate that the inferior organic field-effect transistor (OFET) performances of DPP-6T are attributed to longer π-stacking distance. Also, less-ordered molecular arrangement and lower continuity of crystalline domains, both of which are revealed from crystallinity results, lead to lower mobility of DPP-6T. In this case, longer conjugated backbones with more conformational degrees of freedom thus cause inherent crystal defects during the crystal growth process, despite the potential to enhance intermolecular π-orbital overlap. Therefore, to achieve better OFET performance, suitable backbone length makes conjugated oligomers give high intermolecular π-orbital overlap and low density of structural disorder, which are the priorities for constructing good charge channel.