Implementing menstrual cycle tracking: A pilot concept mapping study investigating considerations of coaches, support staff, and female athletes.

OBJECTIVES: To identify what coaches, support staff, and athletes believe should be considered when implementing menstrual cycle tracking in sport. DESIGN: Concept mapping (mixed-methods participatory approach). METHODS: Participants brainstormed statements in response to the focus prompt "What should be considered when tracking menstrual cycles in sport?" Participants then sorted the statements into groups according to meaning and rated each statement on its importance and feasibility to address. RESULTS: Twenty-six participants (12 athletes and 14 coaches/support staff) generated 53 ideas that the research team synthesised to 57 unique statements. Sixteen participants sorted the statements into an average of 8 (±4) groups. Six clusters were identified as the most appropriate representation of the sorting data following multidimensional scaling and hierarchical cluster analysis: 1) Ethics, 2) Tracking Tools and Methods, 3) Performance and Health, 4) Education, 5) Interpretation and Framing and 6) Communication. Participants rated each statement based on their importance (n = 12) and feasibility (n = 10), respectively. The most important (mean = 3.88 out of 5) and feasible (mean = 3.85 out of 5) cluster was Ethics, whilst the least important (mean = 3.17) and feasible (mean = 3.04) was Communication. CONCLUSIONS: Ethical considerations pertaining to privacy, consent, and scope of practice should be prioritised when tracking menstrual cycles in sport. A low burden method of tracking, which allows for some individualisation based on athletes' preferences or needs, and menstrual health education should also be undertaken to improve the uptake and impact of menstrual cycle tracking.

The test-retest reliability of physiological and perceptual responses during treadmill load carriage.

PURPOSE: Understanding the test-retest reliability of physiological responses to load carriage influences the interpretation of those results. The aim of this study was to determine the test-retest reliability of physiological measures during loaded treadmill walking at 5.5 km h-1 using the MetaMax 3B. METHODS: Fifteen Australian Army soldiers (9 male, 6 female) repeated two 12-min bouts of treadmill walking at 5.5 km h-1 in both a 7.2 kg Control condition (MetaMax 3B, replica rifle) and a 23.2 kg Patrol condition (Control condition plus vest) across three sessions, separated by one week. Expired respiratory gases and heart rate were continuously collected, with the final 3 min of data analysed. Ratings of Perceived Exertion and Omnibus-Resistance Exercise Scale were taken following each trial. Reliability was quantified by coefficient of variation (CV), intra-class correlation coefficients (ICC), smallest worthwhile change (SWC), and standard error of the measurement. RESULTS: Metabolic and cardiovascular variables were highly reliable (≤ 5% CV; excellent-moderate ICC), while the respiratory variables demonstrated moderate reliability (< 8% CV; good-moderate ICC) across both conditions. Perceptual ratings had poorer reliability during the Control condition (12-45% CV; poor ICC) than the Patrol condition (7-16% CV; good ICC). CONCLUSIONS: The test-retest reliability of metabolic and cardiovascular variables was high and relatively consistent during load carriage. Respiratory responses demonstrated moderate test-retest reliability; however, as the SWC differed with load carriage tasks, such data should be interpreted independently across loads. Perceptual measures demonstrated poor to moderate reliability during load carriage, and it is recommended that they only be employed as secondary measures.

Under the Gun: Percussive Massage Therapy and Physical and Perceptual Recovery in Active Adults.

CONTEXT: Handheld percussive massage devices (ie, massage guns) are a relatively new and under-researched recovery tool. These tools are intended to increase range of motion and reduce muscle soreness by delivering targeted vibration to soft tissues. Empirical knowledge about the potential influence of these devices on perceptual recovery and the recovery of performance characteristics after exercise is scarce. OBJECTIVE: To investigate the effect of a 5-minute massage gun application, using a commercially available device, on physical and perceptual recovery after a strenuous bout of lower body exercise. DESIGN: Controlled laboratory study. SETTING: Physiology laboratory. PATIENTS OR OTHER PARTICIPANTS: A total of 65 active young adults (age = 21.3 ± 1.4 years; age range = 18-30 years; 34 women: height = 165.8 ± 6.1 cm, mass = 66.0 ± 7.4 kg; 31 men: height = 181.1 ± 6.0 cm, mass = 81.5 ± 11.8 kg). INTERVENTION(S): Participants applied a massage gun on the calf muscles of 1 leg after strenuous exercise (massage gun recovery group) for 5 minutes and used no recovery intervention on the other leg (control group). MAIN OUTCOME MEASURE(S): Ankle range of motion, calf circumference, isometric strength, calf endurance, and perceived muscle soreness measures were collected at baseline and at various points after lower body exercise. RESULTS: No significant group × time interactions were recorded for any of the performance or perceptual measures (P values > .05). Effect sizes were mostly unclear, except for a small increase in perceived muscle soreness in the massage gun recovery group compared with the control group immediately (d = -0.35) and 4 hours (d = -0.48) postrecovery. CONCLUSIONS: Massage guns appeared to have little effect on physical measures when applied for 5 minutes immediately after strenuous calf exercise. Given the small increase in muscle soreness up to 4 hours after their use, caution is recommended when using massage guns immediately after strenuous lower body exercise.

Peak match acceleration demands differentiate between elite youth and professional football players.

Youth footballers need to be developed to meet the technical, tactical, and physical demands of professional level competition, ensuring that the transition between competition levels is successful. To quantify the physical demands, peak match intensities have been measured across football competition tiers, with team formations and tactical approaches shown to influence these physical demands. To date, no research has directly compared the physical demands of elite youth and professional footballers from a single club utilising common formations and tactical approaches. The current study quantified the total match and peak match running demands of youth and professional footballers from a single Australian A-League club. GPS data were collected across a single season from both a professional (n = 19; total observations = 199; mean ± SD; 26.7 ± 4.0 years) and elite youth (n = 21; total observations = 59; 17.9 ± 1.3 years) team. Total match demands and peak match running demands (1-10 min) were quantified for measures of total distance, high-speed distance [>19.8 km·h-1] and average acceleration. Linear mixed models and effect sizes identified differences between competition levels. No differences existed between competition levels for any total match physical performance metric. Peak total and high-speed distances demands were similar between competitions for all moving average durations. Interestingly, peak average acceleration demands were lower (SMD = 0.63-0.69) in the youth players across all moving average durations. The data suggest that the development of acceleration and repeat effort capacities is crucial in youth players for them to transition into professional competition.

Positional and temporal differences in peak match running demands of elite football.

Temporal changes in the total running demands of professional football competition have been well documented, with absolute running demands decreasing in the second half. However, it is unclear whether the peak match running demands demonstrate a similar decline. A total of 508 GPS files were collected from 44 players, across 68 matches of the Australian A-League. GPS files were split into the 1st and 2nd half, with the peak running demands of each half quantified across 10 moving average durations (1-10 min) for three measures of running performance (total distance, high-speed distance [> 19.8 km · h-1] and average acceleration). Players were categorised based on positional groups: attacking midfielder (AM), central defender (CD), defensive midfielder (DM), striker (STR), wide defender (WD) and winger (WNG). Linear mixed models and effect sizes were used to identify differences between positional groups and halves. Peak running demands were lower in the second half for STR across all three reported metrics (ES = 0.60-0.84), with peak average acceleration lower in the second half for DM, WD and WNG (ES = 0.60-0.70). Irrespective of match half, AM covered greater peak total distances than CD, STR, WD and WIN (ES = 0.60-2.08). Peak high-speed distances were greater across both halves for WIN than CD, DM and STR (ES = 0.78-1.61). Finally, STR had lower peak average acceleration than all positional groups across both halves (ES = 0.60-1.12). These results may help evaluate implemented strategies that attempt to mitigate reductions in second half running performance and inform position specific training practices.

Association Between Position-Specific Impact and Movement Characteristics of Professional Rugby Union Players During Game Play.

ABSTRACT: Peek, RJ, Carey, DL, Middleton, KJ, Gastin, PB, and Clarke, AC. Association between position-specific impact and movement characteristics of professional rugby union players during game play. J Strength Cond Res 37(1): 161-166, 2023-The aim of this study was to understand the association between impact and movement characteristics during whole game and peak 1- to 10-minute rolling windows in professional rugby union. Maximal impact (impacts·min-1) and corresponding running (m·min-1) characteristics as well as maximal running (m·min-1) and corresponding impact (impacts·min-1) characteristics were obtained for 160 athletes from 4 teams across the 2018 and 2019 Super Rugby seasons. A linear mixed-effects model reported a positive association between whole-game running and impacts, where greater impact characteristics corresponded with greater running characteristics. The average 1-minute peak running characteristics (150-160 m·min-1) typically occurred when no impacts occurred. The average 1-minute peak impact characteristics (4-6 impacts·min-1) corresponded with an average relative distance of 90-100 m·min-1. Worst case scenario observed impact characteristics as large as 15 impacts·min-1 with a corresponding relative distance of 140 m·min-1. When training for peak period characteristics, running may be completed in isolation; however, peak impacts often occur in conjunction with moderate to high running movements. Given running and impact characteristics can appear concurrently within game play, this highlights the need to train them accordingly. As such, when prescribing training drills to replicate the peak characteristics in rugby union, consideration should be taken for both running and impact characteristics.

Contextual Factors Influencing Physical Activity and Technical Performance in Australian Football League Women's Competition Match-Play.

ABSTRACT: Leabeater, A, Clarke, A, and Sullivan, C. Contextual factors influencing physical activity and technical performance in AFLW competition match-play. J Strength Cond Res 37(1): 194-199, 2023-The purpose of this study was to examine the influence of contextual factors on physical activity and technical match performance during Australian Football League Women's (AFLW) competition match-play. The study was of a retrospective longitudinal design and used physical activity and technical data collected from female Australian Football players (n = 49) from 1 team during 23 AFLW competition games over 3 seasons. A three-level linear mixed model was constructed to investigate the influence of different contextual factors (match-related variables) on relative total distance (TD), relative high-speed running (HSR) distance, and ranking points during AFLW match-play. The results showed that from season 1 to season 3, relative TD increased by 2.0 m·min-1 (ES: 0.06 [-0.04 to 0.16], p < 0.05) and relative HSR increased by 4.1 m·min-1 (ES: 0.22 [0.14-0.31], p < 0.001). Interstate matches were associated with a reduction of 5.1 m·min-1 per match in TD (ES: -0.21 [-0.30 to -0.12], p < 0.001) and 2.5 m·min-1 in HSR distance (ES: -0.22 [-0.31 to -0.13], p < 0.001). Total disposals were associated with a 0.23 m·minute-1 reduction in HSR for that player (ES: -0.13 [-0.22 to 0.04], p < 0.01). Match margin was the only contextual factor to influence ranking points/min (0.007 AU·min-1, ES: 0.30 [0.21-0.38], p < 0.001). In conclusion, this study shows that player physical activity may be reduced during interstate AFLW matches; the average HSR has increased since the start of the AFLW competition and may reflect increasing match activity profiles, and players have a greater rate of accumulation of ranking points when the score difference is greater.

Effects of concussion on technical performance in professional Australian football.

INTRODUCTION: There is limited research on the on-field performance of previously concussed athletes. The aim of this exploratory study was to investigate athlete technical performance pre- and post-concussion in Australian Football. METHODS: Using publicly available data, male athletes who sustained a concussion during the 2016-19 professional Australian Football League seasons were analysed across five games pre- and post-concussion (concussion events n = 41, age 25.4 ± 3.5 years; control n = 39, age 25.2 ± 3.6 years). Mean technical performance metrics (goals, time-on-ground percentage, kicks, ground ball and disposal efficiency, contested marks) over the five games pre- and post-concussion, as well as within-athlete performance variability measures (standard deviation and coefficient of variation) were analysed. RESULTS: Results showed no significant group-by-time interactions, nor effect of time (pre-post) for any technical performance metric. Similarly, the within-athlete standard deviation and coefficient of variation of technical performance metrics showed no group-by-time interaction, nor effect for time. CONCLUSION: This retrospective study has shown that athlete performance averaged over five games is not affected post-concussion in elite men's Australian Football. Further prospective studies controlling for contextual match factors based on opposition and environmental conditions may be required to identify potential in-game technical performance changes following return-to-play from concussion.

Temporal distribution of peak running demands relative to match minutes in elite football.

The peak match running demands of football (soccer) have been quantified across time durations of 1-10 min, however, little is known as to when the peak match running demands occur within match play. Data were collected from 44 elite footballers, across 68 fixtures (Files = 413, mean ± SD; 11 ± 8 observations per player, range; 1-33), with peak match running demands quantified for each playing half at ten incremental rolling average durations (1 min rolling averages, 2 min rolling averages, etc.). Data were assessed if players completed the full match. Three measures of running performance were assessed total distance (TD), high-speed distance (> 19.8 km · h-1) (HSD) and average acceleration (AveAcc)], with the in-game commencement time of the peak running demands recorded. Descriptive statistics and normality were calculated for each rolling average duration, with the self-containment of shorter rolling average epochs within longer epochs also assessed (e.g. Do the 1 min peak running demands occur within the 10 min peak running demands). Peak TD and AveAcc demands occurred early in each half (median time = 7-17 min and 6-16 min, respectively). Conversely, peak HSD covered was uniformly distributed (Skewness = 0-0.5, Kurtosis = 1.7-2.0). There were low-moderate levels of self-containment for each peak match running period (10-51%), dependent upon metric. Peak match running demands for TD and AveAcc occurred at similar stages of a match where TD and acceleration volumes are typically greatest, whereas peak HSD demands appeared more unpredictable. These timings may help inform training prescriptions in preparation of athletes for competition.

Between-match variation of peak match running intensities in elite football.

Peak match running intensities have recently been introduced to quantify the peak running demands of football competition, across incremental time intervals, to inform training practices. However, their between-match variation is yet to be comprehensively reported, limiting the ability to determine meaningful changes in peak match running intensities. The current study aimed to quantify the between-match variability in peak match running intensities across discrete moving average durations (1-10 min). GPS data were collected from 44 elite football players across 68 matches (mean ± SD; 13 ± 10 observations per player). For inclusion players must have completed 70mins of a match across a minimum of two matches. Performance metrics included total and high-speed (> 19.8 km · h-1) running distances and average acceleration (m · s-2), expressed relative to time. For each metric, the coefficient of variation and smallest worthwhile difference were calculated. The peak match running intensity data was similar to previously reported data from various football competitions. The between-match CV of relative total distance ranged between 6.8-7.3%, with the CV for average acceleration and relative high-speed running being 5.4-5.8% and 20.6-29.8%, respectively. The greater variability observed for relative high-speed running is likely reflective of the varying constraints and contextual factors that differ between matches. The reported between-match variability helps to provide context when interpreting match performance and prescribing training drills using peak match running intensity data.

Assessment of Physical, Technical, and Tactical Analysis in the Australian Football League: A Systematic Review.

BACKGROUND: Elite Australian Football (AF) match-play requires proficiency in physical, technical, and tactical elements. However, when analysing player movement practitioners commonly exclude technical and tactical considerations, failing to recognise the multifactorial nature of AF match-play and providing little context into the movement requirements of the players. OBJECTIVES: This systematic review aimed to identify the physical, technical, and tactical requirements of the Australian Football League (AFL) and to highlight the importance of integrating data from multiple sources when analysing player output. METHODS: A systematic search of electronic databases (CINAHL, PubMed, Scopus, SPORTDiscus, and Web of Science) was conducted from January 2009 to June 2022. Keywords relating to physical, technical, and tactical match requirements were used. RESULTS: Forty-eight studies met the inclusion criteria. In isolation, physical requirements were the most analysed construct within the AFL (n = 17), followed by technical (n = 9) and then tactical (n = 6). Thirteen studies integrated physical and technical elements, one study integrated technical and tactical elements, one study integrated physical and tactical elements, and one study integrated all three elements. Movement analysis centred around average 'whole' match requirements, whereas technical and tactical match analyses focused on key performance indicators of match performance. CONCLUSION: While the physical requirements of the AFL have been well documented, there is little understanding of how player technical output and various team tactics influence player movement requirements. Knowledge of how the elements of AF match-play interact with one another could enhance our understanding of match performance and provide a greater resource for training prescription.

Comparing tibial accelerations between delivery and follow-through foot strikes in cricket pace bowling.

Foot strikes of the pace-bowling delivery stride produce large ground reaction forces, which may be linked to injury, yet the biomechanics of the follow-through are unknown. This study assessed tibial accelerations across the delivery and follow-through foot strikes in pace bowlers and evaluated relationships between these measures and five common pace-bowling intensity metrics. Fifteen sub-elite male pace bowlers performed deliveries at warm-up, match, and maximal intensities. Tibial accelerations were measured using tibial-mounted inertial measurement units and recorded at back- and front-foot initial and re-contacts. A trunk-worn global navigation satellite system unit measured PlayerLoad™, run-up speed, and distance. Ball speed and perceived exertion measures were also recorded. A linear mixed model showed statistical significance of prescribed intensities (p < .001) and foot strike for tibial acceleration (p < .001). Tibial accelerations showed positive increases with changes in prescribed intensity (p < .05). The greatest magnitude of tibial acceleration was found at back foot re-contact (mean ± SD; 1139 ± 319 m/s2). Repeated-measures correlations of tibial acceleration between foot contacts were weak (r = 0.2-0.4). The greatest magnitude of tibial acceleration reported at back foot re-contact may have implications for injury incidence, representing an important avenue for future pace bowling research.

Investigating the Psychophysiological Response to Grade One Muscular Injuries in Professional Australian Football Athletes.

The purpose of this study was to examine Australian Football athletes' responses to a grade one muscular injury from a psychophysiological perspective to understand the strength of the association between stress, optimism, and cortisol. Forty-five players listed with one professional Australian Football club volunteered for this study. Inclusion criteria consisted of sustaining a muscular injury during the course of the season with four-weeks predicted recovery time (as diagnosed by club medical staff, n=9). The control group were age, position, and career history matched players from the same sample. Players were also matched for their personality (10-item Big Five Personality Inventory) and fluid intelligence (Raven's Standard Progressive Matrices). Injured players and matched controls completed perceived stress and optimism measures (paper-based questions) as well as salivary cortisol testing once per week for four weeks. Significant increases in cortisol (p=0.015) and perceived stress (p<0.001) were observed in injured players, along with a reduction in optimism (p<0.001) returning by week 4. A significant positive correlation was found between perceived stress and cortisol (r= 0.426), and significant negative correlations observed between optimism and cortisol r= -0.257 and perceived stress r= -0.391. This study showed that athletes were significantly stressed and less optimistic during the first two-weeks of recovery compared to matched controls. While not statistically significant, large effects observed in cortisol and stress in the week prior to returning to competition in the injured group suggest these results demonstrate that a multi-modality approach can improve understanding of psychophysiological stress following a grade one muscular injury in Australian Football athletes.

Validity and between-unit agreement of commercially-available linear position transducer and inertial sensor devices during loaded countermovement jumps.

To assess the validity and between-unit agreement of velocity monitoring devices during incrementally-loaded countermovement jumps (CMJ), 16 males (24.0 ± 3.5 yr) completed 12 CMJs on a force plate (FP). Performance variables were collected through two linear position transducers (GymAware [GA]) and four accelerometer-based devices (two PUSH units, two Bar Sensei units). Pearson correlations (r) and coefficients of variation (CV) demonstrated strong to very-strong relationships (r = 0.60-0.88) and poor agreement (CV = 11.7-25.3%) between FP and GA, and moderate to very-strong relationships (r = 0.31-0.81) and poor agreement (CV = 10.1-24.2%) between FP and PUSH. Between-unit comparisons demonstrated moderate to very-strong relationships (r = 0.50-0.88) with poor agreement (CV = 10.8-26.6%) for GA, and very weak to very-strong relationships (r = 0.01-0.87) with moderate to poor agreement (CV = 9.1-24.1%) for PUSH. Bar Sensei units were excluded from analyses. Loaded CMJ data collected with either device displayed poor agreement with a FP. Velocity monitoring devices demonstrate poor validity across all loads; however, GA demonstrated strong between-unit agreement. A FP should be utilised to accurately assess CMJ performance at all times.

The temporal distribution and occurrence of impacts and movement relative to peak periods in men's rugby union.

OBJECTIVES: This study identifies the distribution (as a percentage of the positional peak) and occurrence (within a half) of 1-min movement characteristics (m·min-1) and contact-based events (impact·min-1) during professional rugby union game play. DESIGN: Within 95 rugby union games, players wore global positioning system (GPS) devices (n = 1422 player-game files, 160 athletes). One-minute rolling-window averages were calculated with the maximum and mean value being recorded for each dependent variable; relative distance (m·min-1) and impacts (impact·min-1), then standardised by the positional peak mean. METHODS: The distribution of these variables accumulated in 10% increments of the peak were determined as was their occurrence throughout a playing half for each positional group. RESULTS: The greatest distribution of game play (%) was observed at ~30-39% of the positional peak for movement and with no impacts. The greatest occurrence of maximum positional peak 1-min movement periods occurred at the beginning of each half and declined as the half went on. Peak impact characteristics, however, were found to be more sporadic across a half. CONCLUSIONS: These findings suggest that the distribution of positional peak 1-min movement (80-100%+) and peak impacts (4+) were <5% of overall game play, and observed <2% of total occurrences. This highlights that practitioners should alter training drills by time, volume, and intensity in order to replicate the peak intensities of game play.

Technical involvements and pressure applied influence movement demands in elite Australian Football Match-play.

Match activity analyses in Australian Football (AF) have provided information on the loads of match-play and identified contextual factors influencing physical activity. Match physical activity has been shown to be influenced by technical and tactical factors. This study examined the association of in-game contextual factors and technical involvements on the activity demands of elite AF players. Global positioning system data were recorded from 35 players in 13 matches throughout the 2019 Australian Football League (AFL) season. Technical involvements - player possession, and defensive pressure applied - were attained from Champion Data (AFL statistics provider), while possession phases and the commencing possession chain event were manually coded. Mixed models examined the influence possession chain contextual factors had on the total distance (TD) and high-speed running (HSR). During attacking phases, physical activity increased when a player had a possession, when a greater number of opposition players applied pressure, and when play was initiated from a turnover (p ≤ 0.001). During defensive phases, physical activity was greatest when an individual player applied pressure, however, also increased when the total number of players applying pressure increased and when play was initiated from a turnover or kick-in (p ≤ 0.001). Overall, this study combines the three constructs of AF performance (physical, technical and tactical) and demonstrates that TD and HSR demands are greatest in a chain when a player was directly involved in the play or applying pressure on the opposition.

An isometric neck strengthening program does not improve neck strength in elite women's football-code athletes: A randomised controlled trial.

OBJECTIVES: The purpose of this study was to investigate the effectiveness of an isometric neck strengthening program to improve isometric neck strength in elite women's football-code athletes. DESIGN: Randomised controlled trial. METHODS: Elite female soccer (n = 10) and Australian football (n = 30) players were randomised into either a control (n = 20) or experimental (n = 20) group for a 12-week intervention study during their respective seasons. While both groups undertook their prescribed strength and conditioning programs, the experimental group also performed isometric neck strengthening exercises three times per week prior to training. Isometric neck strength of the extensors, flexors, lateral flexors, and rotators were assessed pre, mid (Week 7), and post (Week 13) intervention with a hand-held dynamometer during early to mid-competition season. A mixed design analysis of variance was performed for statistical analysis. RESULTS: No significant group-by-time interactions in isometric neck strength were observed. All strength variables displayed a significant change over time throughout the 12-week period (p < 0.05). No significant between group differences in isometric neck strength variables were observed except for lateral left flexion (F(1, 38) =5.064, p = 0.030, η2p = 0.117). CONCLUSIONS: The addition of isometric neck strengthening exercises did not improve neck strength beyond a standard strength and conditioning program for elite women's football-code athletes. While this specific program may not improve neck strength in elite women's football-code athletes, further investigation is needed to determine whether sport-specific neck strength exercises may improve neck strength or if lower-level competition athletes may still benefit from an isometric neck strengthening program.

Objective assessment of fast bowling delivery intensity in amateur male cricketers.

Wearable microtechnology is effective in detecting fast deliveries in cricket, however methods to quantify delivery intensity have not been established. This study aimed to investigate the utility of wearable sensors in quantifying cricket fast bowling intensity.Fifteen sub-elite male fast bowlers performed deliveries at warm-up, match, and maximal intensities. A principal component analysis resulted in the selection of perceived exertion and seven variables of bowling exertion derived from trunk- (PlayerLoad™, trunk flexion velocity, trunk forward rotation velocity) and tibia-mounted (tibial acceleration at back foot contact, front foot contact, back foot re-contact and front foot re-contact) inertial measurement units for further analysis. Repeated measures ANOVAs were used to investigate the effect of intensity on outcome variables. Significant main effects of intensity and large effect sizes were identified for all variables (p < .05, np2 > 0.14). Measures from the match and maximal conditions were significantly larger compared with the warm-up condition (Pholm < .05). No differences were observed between the match and maximal conditions (p > .05). Inertial measurement metrics can distinguish between a warm-up effort and both match and maximal fast bowling delivery intensity. These devices provide a unique, time-efficient approach to cricket fast bowling exertion quantification.

The AFLW draft combine: Seasonal changes and relationships to draft success.

This study aimed to identify seasonal changes in AFLW Draft Combine assessments, examine the physical and anthropometric assessments associated with draft outcome and investigate the presence of a relative age effect. Three seasons (2017-2019) of the AFLW Draft Combine assessment data were obtained (n = 131). Testing data between seasons were examined using a MANOVA. A factor analysis using principal components (identifying speed, lower body power, aerobic capacity, and anthropometry) was conducted prior to the construction of a binary logistic regression model. Speed (including 5, 10 and 20 m sprint times) significantly contributed to the binary logistic regression model discriminating drafted and non-drafted players (p = 0.040). A significant main effect of season was reported (p ≤ 0.01) with post-hoc tests confirming 5, 10 and 20 m sprint times were faster in the 2018 AFLW Draft Combine compared with the 2017 AFLW Draft Combine. No relative age effect was observed in this dataset. Overall, the 20 m sprint test showed the greatest difference between drafted and non-drafted players, while speed (collectively) was the greatest predictor of draft outcome. This data provides insight into the physical qualities of prospective players that were associated with selection to the AFLW competition in its first 3 years.

Peak movement and impact characteristics of different training methods in professional rugby union.

The purpose of this study was to compare the peak periods (1- to 6-minute epochs) for three different training methods (game-based training - GBT; small-sided games - SSG; and conditioning training - CT) in elite male rugby union (RU) players. The peak movement (m·min-1) and impact (impact·min-1) characteristics of 42 players during in-season training were assessed. When comparing between training methods, SSG drills produced the greatest peak movement characteristics for all time epochs (1-minute average peak periods - SSG 195 m·min-1, GBT 160 m·min-1, and CT 144 m·min-1). The peak impact characteristics performed during training were 1-2 impact·min-1 for a 1-minute period and then decreased as the time period increased for all training methods. The greatest distribution of training time occurred at 30-39% (SSG and CT) and 40-49% (GBT) of peak movement intensity, with less than 5% of training performed at or above 80% peak intensity across all drill types. Findings from the current study show that the peak movement periods (m·min-1) in RU training from all three training methods match or exceed those which are previously reported in peak gameplay, yet their ability to replicate peak impact characteristics is questionable.