ABSTRACT
Polysaccharide-based hydrogels are achieving remarkable performances in chronic wounds treatment. In this work, a carboxymethyl cellulose-based hydrogel film was developed to support skin repair. The hydrogel was loaded with berberine, a polyphenolic molecule endowing antioxidant and cytoprotective features. The film was physico-chemically characterized and in vitro tested on keratinocytes and fibroblasts subjected to oxidative stress. The biocomposite showed high thermal stability (onset decomposition temperature 245 °C) and significant fluid uptake performances, both in free conditions (up to 6510%) and under external pressure (up to 3400%). Moreover, it was able to control oxidative stress and inflammation markers involved in wound chronicity. Keratinocytes hyperproliferation, features that normally hamper injury restoration, was reduced of 25%. Our results showed that the combination of berberine and hydrogel provides a synergic improvement of the material properties. The biocomposite represents a promising candidate for dermatological applications against oxidative stress at the chronic wound site, promoting the healing process.
Subject(s)
Berberine/pharmacology , Carboxymethylcellulose Sodium/chemistry , Hydrogels/pharmacology , Wound Healing/drug effects , Antioxidants/pharmacology , Bandages , Berberine/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Cell Survival/drug effects , Fibroblasts/drug effects , Humans , Hydrogels/chemistry , Keratinocytes/drug effects , Oxidative Stress/drug effects , Spectroscopy, Fourier Transform Infrared/methods , TemperatureABSTRACT
This work has been aimed at studying the effect of red thyme oil (RTO, Thymus vulgaris L.) on the shelf-life and Penicillium decay of oranges during cold storage. RTO vapours significantly reduced (P ≤ 0.05) the percentage of infected wounds, the external growth area and the production of spores in inoculated orange fruit stored for 12 days at 7 °C in a polypropylene film selected for its appropriate permeability. Among the RTO compounds, p-cymene and thymol were the most abundant in packed boxes at the end of cold storage. The RTO vapours did not affect the main quality parameters of the oranges, or the taste and odour of the juice. The results have shown that an active packaging, using RTO vapours, could be employed, by the citrus industry, to extend the shelf-life of oranges for fresh market use and juice processing.
Subject(s)
Food Quality , Food Storage/methods , Oils, Volatile/pharmacology , Penicillium/drug effects , Thymus Plant/metabolism , Antioxidants/chemistry , Citrus/chemistry , Citrus/metabolism , Citrus/microbiology , Cold Temperature , Fruit and Vegetable Juices/analysis , Gas Chromatography-Mass Spectrometry , Hydrogen-Ion Concentration , Oils, Volatile/analysis , Penicillium/physiologyABSTRACT
The aim of this work is to evaluate the potential of non-coated-, chitosan-(CS)- or chitosan-glutathione conjugate- (CS-GSH)-coated liposomes to protect the neurotransmitter Dopamine (DA) from the autoxidation reaction in neutral/alkaline conditions. This may be of interest in the development of nanotechnology-based approaches to improve Parkinson's disease treatment because decreased ROS production and reduced DA associated neurotoxicity are expected. For the mentioned purposes, DA-loaded vesicles were prepared by the Dried Reconstituted Vesicles (DRV) method, and were subsequently coated using solutions of polycations. As for the mean diameters of liposomes so prepared, the CS-GSH coated liposomes showed a significant decrease in size compared to the corresponding non-coated and CS-coated vesicles. The surface charge of DA-loaded non-coated liposomes was -10.8â¯mV, whereas the CS or CS-GSH coated vesicles showed a slightly positive ζ-potential. The capability of the herein studied vesicles to prevent DA autoxidation was evaluated by visual inspection, monitoring DA/lipid ratio as such and under stressed conditions. The results suggest that liposome formulations partially protect the neurotransmitter from the autoxidation reaction. In particular, the CS-GSH coated liposomes were more stable than the corresponding CS-coated and non-coated ones against the oxidative damage and were found to deliver the neurotransmitter in a sustained manner. Probably, this is due to the localization of the neurotransmitter in the core of the vesicles as indicated by XPS which confirmed the absence of the neurotransmitter on the surface of these vesicles.
Subject(s)
Chitosan/chemistry , Coated Materials, Biocompatible/chemistry , Dopamine/chemistry , Sulfhydryl Compounds/chemistry , Liposomes/chemistry , Oxidation-Reduction , Particle Size , Surface PropertiesABSTRACT
This data article is related to our recently published research paper "Exploiting a new glycerol-based copolymer as a route to wound healing: synthesis, characterization and biocompatibility assessment", De Giglio et al. (Colloids and Surfaces B: Biointerfaces 136 (2015) 600-611) [1]. The latter described a new copolymer derived from glycerol and tartaric acid (PGT). Herein, an investigation about the PGT-ciprofloxacin (CIP) interactions by means of Fourier Transform Infrared Spectroscopy (FT-IR) acquired in Attenuated Total Reflectance (ATR) mode and Differential Scanning Calorimetry (DSC) was reported. Moreover, CIP release experiments on CIP-PGT patches were performed by High Performance Liquid Chromatography (HPLC) at different pH values.
ABSTRACT
This paper contains original data supporting the antibacterial activities of Gallium (Ga(3+))-doped pro-osteointegrative titanium alloys, obtained via Anodic Spark Deposition (ASD), as described in "The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii" (Cochis et al. 2016) [1]. In this article we included an indirect cytocompatibility evaluation towards Saos2 human osteoblasts and extended the microbial evaluation of the Ga(3+) enriched titanium surfaces against the biofilm former Escherichia coli and Staphylococcus epidermidis strains. Cell viability was assayed by the Alamar Blue test, while bacterial viability was evaluated by the metabolic colorimetric 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay. Finally biofilm morphology was analyzed by Scanning Electron Microscopy (SEM). Data regarding Ga(3+) activity were compared to Silver.
ABSTRACT
Implant-related infection of biomaterials is one of the main causes of arthroplasty and osteosynthesis failure. Bacteria, such as the rapidly-emerging Multi Drug Resistant (MDR) pathogen Acinetobacter Baumannii, initiate the infection by adhering to biomaterials and forming a biofilm. Since the implant surface plays a crucial role in early bacterial adhesion phases, titanium was electrochemically modified by an Anodic Spark Deposition (ASD) treatment, developed previously and thought to provide osseo-integrative properties. In this study, the treatment was modified to insert gallium or silver onto the titanium surface, to provide antibacterial properties. The material was characterized morphologically, chemically, and mechanically; biological properties were investigated by direct cytocompatibility assay, Alkaline Phosphatase (ALP) activity, Scanning Electron Microscopy (SEM), and Immunofluorescent (IF) analysis; antibacterial activity was determined by counting Colony Forming Units, and viability assay. The various ASD-treated surfaces showed similar morphology, micrometric pore size, and uniform pore distribution. Of the treatments studied, gallium-doped specimens showed the best ALP synthesis and antibacterial properties. This study demonstrates the possibility of successfully doping the surface of titanium with gallium or silver, using the ASD technique; this approach can provide antibacterial properties and maintain high osseo-integrative potential.
Subject(s)
Acinetobacter Infections/prevention & control , Acinetobacter baumannii/drug effects , Anti-Bacterial Agents/pharmacology , Coated Materials, Biocompatible/pharmacology , Gallium/pharmacology , Silver/pharmacology , Acinetobacter Infections/etiology , Acinetobacter baumannii/physiology , Anti-Bacterial Agents/chemistry , Bacterial Adhesion/drug effects , Biofilms/drug effects , Cell Line , Coated Materials, Biocompatible/chemistry , Drug Resistance, Multiple , Gallium/chemistry , Humans , Prostheses and Implants/adverse effects , Silver/chemistry , Surface Properties , Titanium/chemistryABSTRACT
The use of biocompatible materials based on naturally derived monomers plays a key role in pharmaceutical and cosmetic industries. In this paper we describe the synthesis of a new low molecular weight copolymer, based on glycerol and l-tartaric acid, useful to develop biocompatible dermal patches with drug delivery properties. The copolymer's chemical composition was assessed by FT-IR (Fourier transform infrared spectroscopy), (1)H NMR ((1)H Nuclear Magnetic Resonance) and XPS (X-ray photoelectron spectroscopy), while its molecular weight distribution was estimated by SEC (size exclusion chromatography). Copolymer thermal properties were studied by TGA (thermogravimetric analysis). Biological evaluations by MTT assay and SEM (scanning electron microscopy) observations performed with murine fibroblasts and human keratinocytes (HaCaT) revealed a good compatibility of the proposed copolymer. Ciprofloxacin was selected as model drug and its release was evaluated by HPLC (high performance liquid chromatography), showing that the new copolymer supplied promising results as drug delivery system for wound healing applications. Furthermore, investigations on Skin-Mesenchymal stem cells (S-MSCs) behaviour and gene expression showed that the copolymer and its combination with ciprofloxacin did not affect their stemness. In this regard, the fabrication of dermal patches with new, low cost materials for local treatment of skin infections represents an attractive strategy in order to bypass the worrying side effects of systemic antibiotic therapy. Overall, the performed physico-chemical characterization, drug release test and biological evaluations showed that this new copolymer could be a promising tool for the in situ delivery of bioactive molecules during skin lesions treatment.
Subject(s)
Biocompatible Materials , Glycerol/chemistry , Polymers/chemistry , Wound Healing , Animals , Cell Line , Humans , Mice , Microscopy, Electron, Scanning , Proton Magnetic Resonance SpectroscopyABSTRACT
Microbial colonization and biofilm formation on implanted devices represent an important complication in orthopaedic and dental surgery and may result in implant failure. Controlled release of antibacterial agents directly at the implant site may represent an effective approach to treat these chronic complications. Resistance to conventional antibiotics by pathogenic bacteria has emerged in recent years as a major problem of public health. In order to overcome this problem, non-conventional antimicrobial agents have been under investigation. In this study, polyacrylate-based hydrogel thin coatings have been electrosynthesised on titanium substrates starting from poly(ethylene glycol diacrylate)-co-acrylic acid. Silver nanoparticles (AgNPs) with a narrow size distribution have been synthesized using a "green" procedure and immobilized on Ti implant surfaces exploiting hydrogel coatings' swelling capabilities. The coatings have been characterized by XPS and SEM/EDX, while their silver release performances have been monitored by ICP-MS. The antibacterial activity of these AgNP-modified hydrogel coatings was tested evaluating in vitro inhibition growth of Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli, among the most common pathogens in orthopaedic infections. Moreover, a preliminary investigation of the biocompatibility of silver-loaded coatings versus MG63 human osteoblast-like cells has been performed. An important point of strength of this paper, in fact, is the concern about the effect of silver species on the surrounding cell system in implanted medical devices. Silver ion release has been properly tuned in order to assure antibacterial activity while preserving osteoblasts' response at the implant interface.
Subject(s)
Anti-Bacterial Agents/pharmacology , Drug Delivery Systems/methods , Prostheses and Implants/microbiology , Prosthesis-Related Infections/prevention & control , Silver/pharmacology , Bacteria/drug effects , Coated Materials, Biocompatible/analysis , Dosage Forms , Equipment Contamination/prevention & control , Humans , Infusion Pumps, Implantable , Nanoparticles/chemistry , Prosthesis-Related Infections/microbiology , Titanium/chemistryABSTRACT
Implant-associated infections represent an occasional but serious problem in dental and/or orthopaedic surgery. A possible solution to prevent the initial bacterial adhesion may be the coating of the implant surface with a thin layer of antibiotic-loaded biocompatible polymer. Hydrogels are one of the promising and versatile materials as antibiotic controlled release systems. In this work, antibiotic-modified poly(ethylene-glycol diacrylate) hydrogel coatings on titanium substrates were prepared by electrochemical polymerization and tested against methicillin resistant Staphylococcus aureus (ATCC 33591). Two different methods to load vancomycin and ceftriaxone were used. We show that the proposed titanium coatings displayed an interesting antibacterial activity, however, further studies on their effective cytotoxicity will furnish evidence of their real clinical efficacy.
Subject(s)
Anti-Bacterial Agents/pharmacology , Dental Implants , Hydrogel, Polyethylene Glycol Dimethacrylate/administration & dosage , Anti-Bacterial Agents/administration & dosage , Chromatography, High Pressure Liquid , Photoelectron Spectroscopy , TitaniumABSTRACT
New promising and versatile materials for the development of in situ sustained release systems consisting of thin films of either poly(2-hydroxyethyl methacrylate) or a copolymer based on poly(ethylene-glycol diacrylate) and acrylic acid were investigated. These polymers were electrosynthesized directly on titanium substrates and loaded with ciprofloxacin (CIP) either during or after the synthesis step. X-ray photoelectron spectroscopy was used to check the CIP entrapment efficiency as well as its surface availability in the hydrogel films, while high-performance liquid chromatography was employed to assess the release property of the films and to quantify the amount of CIP released by the coatings. These systems were then tested to evaluate the in vitro inhibition of methicillin-resistant Staphylococcus aureus (MRSA) growth. Moreover, a model equation is proposed which can easily correlate the diameter of the inhibition haloes with the amount of antibiotic released. Finally, MG63 human osteoblast-like cells were employed to assess the biocompatibility of CIP-modified hydrogel coatings.
Subject(s)
Ciprofloxacin/pharmacology , Coated Materials, Biocompatible/chemical synthesis , Electrochemical Techniques/methods , Hydrogel, Polyethylene Glycol Dimethacrylate/chemical synthesis , Prosthesis-Related Infections/prevention & control , Titanium/adverse effects , Anti-Bacterial Agents/pharmacology , Cell Adhesion/drug effects , Cell Movement/drug effects , Cell Proliferation/drug effects , Cell Survival/drug effects , Chromatography, High Pressure Liquid , Humans , Kinetics , Methicillin-Resistant Staphylococcus aureus/drug effects , Microbial Sensitivity Tests , Microscopy, Fluorescence , Osteoblasts/cytology , Osteoblasts/drug effects , Osteoblasts/ultrastructure , Photoelectron Spectroscopy , Prosthesis-Related Infections/microbiologyABSTRACT
Novel polyacrylates-based hydrogel thin films were prepared by electrochemical polymerization, a new method to obtain hydrogels directly onto metal substrates. 2-Hydroxy-ethyl-methacrylate (HEMA), a macromer poly (ethylene-glycol diacrylate) (PEGDA) and PEGDA copolymerized with acrylic acid (AA) were used to obtain hydrogels. The electrosynthesized coatings were characterized by X-ray photoelectron spectroscopy, to assess their surface chemical composition, and by water content determination measurements, to characterize the swelling behavior. In particular, quartz crystal microbalance with dissipation monitoring was used to evaluate the pH-dependency of the swelling for AA-containing hydrogels. Moreover, a model protein (bovine serum albumin) and a model drug (caffeine) were entrapped within the hydrogel coatings during electrosynthesis, to examine the release performances and mechanisms of the electrosynthesized hydrogels. It was observed that all the examined polymers showed significant release properties and, in particular, AA-containing hydrogel films confirmed a strong pH-dependence as expected. These coatings seem to be promising in orthopedic field for in situ drug delivery applications.
Subject(s)
Drug Carriers/chemistry , Drug Delivery Systems , Electrochemical Techniques , Hydrogels/chemistry , Metals/chemistry , Animals , Caffeine/chemistry , Caffeine/metabolism , Coated Materials, Biocompatible/chemistry , Elasticity , Hydrogen-Ion Concentration , Materials Testing , Methacrylates/chemistry , Serum Albumin, Bovine/chemistry , Serum Albumin, Bovine/metabolism , Surface Properties , ViscosityABSTRACT
A polyacrylic acid film was synthesized on titanium substrates from aqueous solutions via an electroreductive process for the first time. This work was done in order to develop a versatile coating for titanium-based orthopaedic implants that acts as both an effective bioactive surface and an effective anti-corrosion barrier. The chemical structure of the PAA coating was investigated by X-ray photoelectron spectroscopy (XPS). Scanning electron microscopy (SEM) was employed to evaluate the effect of annealing treatment on the morphology of the coatings in terms of their uniformity and porosity. Inductively coupled plasma mass spectrometry was used to measure ion concentrations in ion release tests performed on Ti-6Al-4V sheets modified with PAA coatings (annealed and unannealed). Results indicate that the annealing process produces coatings that possess considerable anti-corrosion performance. Moreover, the availability and the reactivity of the surface carboxylic groups were exploited in order to graft biological molecules onto the PAA-modified titanium implants. The feasibility of the grafting reaction was tested using a single aminoacid residue. A fluorinated aminoacid was selected, and the grafting reaction was monitored both by XPS, using fluorine as a marker element, and via quartz crystal microbalance (QCM) measurements. The success of the grafting reaction opens the door to the synthesis of a wide variety of PAA-based coatings that are functionalized with selected bioactive molecules and promote positive reactions with the biological system interfacing the implant while considerably reducing ion release into surrounding tissues.
Subject(s)
Acrylic Resins/chemistry , Biocompatible Materials/chemistry , Titanium/chemistry , Dental Materials/chemistry , Electrochemistry , Mass Spectrometry , Microscopy, Electron, Scanning , Porosity , Prostheses and Implants , Spectrum Analysis , Surface Properties , Vanadium/chemistryABSTRACT
The performance of polyacrylic coatings as barrier films against corrosion of titanium-based orthopaedic implants was investigated. In particular, poly(methyl methacrylate) (PMMA) was electrosynthesized on titanium substrates by electro-reductive processes from aqueous monomer solutions. The obtained PMMA coatings were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The effect of an annealing treatment on the morphology of coatings with respect to uniformity and porosity of films was assessed by scanning electron microscopy (SEM). An inductively coupled plasma-mass spectrometry (ICP-MS) technique was used for ion concentration measurements in ion release tests performed on TiAlV sheets modified with PMMA coatings (annealed and unannealed). Results indicated that the annealing process produces coatings with considerable anticorrosion performances.