Carbon quantum dots from hemicucur[6]bit and the application for the detection of Pb2.

A macrocyclic compound, hemicucurbit[6]uril (HemiQ[6]), is employed as the carbon source to produce a novel sort of carbon quantum dots (CQDs) with blue fluorescence in aqueous solution. The CQDs are fully identified by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Nuclear Magnetic Resonance (NMR), zeta potential, ultraviolet/visible (UV-vis) and photoluminescence spectroscopy (PL). The nanomaterial is developed for the analysis of Pb2+ in the light of the Resonance Rayleigh scattering (RRS) changes with the increasing Pb2+ concentration. The proposed probe emerges a high selectivity to Pb2+ and excellent sensitivity in the linear concentration range of 0-6 µM with a detection limit low to 0.42 µM, which is superior to the previous values of Pb2+ sensors, as well as the good anti-interference ability is confirmed by the specifical response to Pb2+ in the presence of other metal cations. Therefore, the proposed analysis of Pb2+ is explored for the application in real samples of tap water and lake water, in satisfied results of acceptable recoveries.

Cucurbit[7]uril-Catalyzed Beckmann Rearrangement of Arylketoximes.

With the existence of cucurbit[7]uril (Q[7]), a supramolecular catalysis strategy for the Beckmann rearrangement of aryl ketoximes to N-substituted amides was successfully established. The cavity of Q[7] was found to be essential for substrate encapsulation and the rearrangement reaction through comparative experiments and studies on host-guest interactions. This supramolecular strategy provides an efficient route for the rearrangement reaction incorporating a carbonation intermediate.

Synthesis of Dihydroquinoxalinones from Biomass-Derived Keto Acids and o-Phenylenediamines.

A novel catalyst-free cascade amination/cyclization/reduction reaction was developed for the synthesis of various Dihydroquinoxalinones under mild conditions from accessible biomass-derived keto acids and 1,2-phenylenediamines with ammonia borane as a hydrogen donor. This single-step approach enables a simple and eco-friendly route toward the direct synthesis of 12 kinds of Dihydroquinoxalinones in moderate to excellent yields in the green solvent dimethyl carbonate. The results of deuterium-labeling experiments and density function calculations demonstrate that the reductive process proceeds along a double hydrogen transfer pathway. An acceptable yield of Dihydroquinoxalinone can be afforded in a gram-scale experiment, illustrating the practicality of the as-reported reaction system.

Preparation and Biomedical Applications of Cucurbit[n]uril-Based Supramolecular Hydrogels.

The cucurbit[n]uril supramolecular hydrogels are driven by weak intermolecular interactions, of which exhibit good stimuli responsiveness and excellent self-healing properties. According to the composition of the gelling factor, supramolecular hydrogels comprise Q[n]-cross-linked small molecules and Q[n]-cross-linked polymers. According to different driving forces, hydrogels are driven by the outer-surface interaction, the host-guest inclusion interaction, and the host-guest exclusion interaction. Host-guest interactions are widely used in the construction of self-healing hydrogels, which can spontaneously recover after being damaged, thereby prolonging their service life. The smart Q[n]s-based supramolecular hydrogel composed is a kind of adjustable and low-toxicity soft material. By designing the structure of the hydrogel or modifying the fluorescent properties, etc., it can be widely used in biomedicine. In this review, we mainly focus on the preparation of Q[n]-based hydrogels and their biomedical applications including cell encapsulation for biocatalysis, biosensors for high sensitivity, 3D printing for potential tissue engineering, drug release for sustained delivery, and interfacial adhesion for self-healing materials. In addition, we also presented the current challenges and prospects in this field.

Supramolecule-Controlled Enantioselectivity for Electrochemical Asymmetric Hydrogenation of Coumarins with a Chiral Macrocyclic Compound.

The supramolecular strategy was subjected to the asymmetric hydrogenation of 4-methylumbelliferone by electrochemical reduction in the presence of a chiral macrocyclic multifarane[3,3], which offered a l-7-hydroxy-4-methylchroman-2-one product with a chemical yield of 65% and enantioselectivity up to >99% ee. The high stability of the developed chiral supramolecular electrode guaranteed the recyclability and repeatability in the electrolysis, and therefore, the application was extended to more coumarin derivatives to provide satisfactory chemical yields and enantioselectivities.

Recent Breakthroughs in Supercapacitors Boosted by Macrocycles.

Supercapacitors are essential for electrochemical energy storage because of their high-power density, good cycle stability, fast charging and discharging rates, and low maintenance cost. Macrocycles, including cucurbiturils, calixarene, and cyclodextrins, are cage-like organic compounds (with a nanocavity that contains O and N heteroatoms) with unique potential in supercapacitors. Here, we review the applications of macrocycles in supercapacitor systems, and we illustrate the merits of organic macrocycles in electrodes and electrolytes for improving the electrochemical double-layer capacitors and pseudocapacitance via supramolecular strategies. Then, the observed relationships between electrochemical performance and macrocyclic structures are introduced. This comprehensive review describes recent progress on macrocycle-block supercapacitors for researchers.

Supramolecular Assembly of Tetramethylcucurbit[6]uril and 2-Picolylamine.

The supramolecular assembly of symmetrical tetramethylcucurbit[6]uril (TMeQ[6]) and 2-picolylamine (AMPy) has been investigated via various techniques, including ultraviolet-visible (UV-vis) and nuclear magnetic resonance spectroscopy, isothermal titration calorimetry (ITC), and X-ray crystallography. The results indicated that TMeQ[6] could encapsulate the AMPy guest molecule to form a stable inclusion complex. The rotational restriction of the guest in the cavity of TMeQ[6] resulted in a large negative value of entropy. The X-ray crystal structure of the 1:1 inclusion complex between TMeQ[6] and AMPy revealed that AMPy exists in the elliptical cavity of TMeQ[6].

Paired electrocatalysis in 5-hydroxymethylfurfural valorization.

5-Hydroxymethylfurfural (HMF) has aroused considerable interest over the past years as an important biomass-derived platform molecule, yielding various value-added products. The conventional HMF conversion requires noble metal catalysts and harsh operating conditions. On the other hand, the electrocatalytic conversion of HMF has been considered as an environmentally benign alternative. However, its practical application is limited by low overall energy efficiency and incomplete conversion. Paired electrolysis and highly efficient electrocatalysts are two viable strategies to address these limitations. Herein, an overview of coupled electrocatalytic HMF hydrogenation or hydrogen evolution reaction (HER) with HMF oxidation as well as the associated electrocatalysts are reviewed and discussed. In this mini-review, a brief introduction of electrocatalytic HMF upgrading is given, followed by the recent advances and challenges of paired electrolysis with an emphasis on the integration HMF electrohydrogenation with HMF electrooxidation. Finally, a perspective for a future sustainable biomass upgrading community based on electrocatalysis is proposed.

Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution.

The semiconductors, such as TiO2, CdS, ZnO, BiVO4, graphene, produce good applications in photocatalytic water splitting for hydrogen production, and great progress have been made in the synthesis and modification of the materials. As a two-dimensional layered structure material, graphitic carbon nitride (g-C3N4), with the unique properties of high thermostability and chemical inertness, excellent semiconductive ability, affords good potential in photocatalytic hydrogen evolution. However, the related low efficiency of g-C3N4 with fast recombination rate of photogenerated charge carriers, limited visible-light absorption, and low surface area of prepared bulk g-C3N4, has called out the challenge issues to synthesize and modify novel g-C3N4-block photocatalyst. In this review, we have summarized several strategies to improve the photocatalytic performance of pristine g-C3N4 such as pH, morphology control, doping with metal or non-metal elements, metal deposition, constructing a heterojunction or homojunction, dye-sensitization, and so forth. The performances for photocatalytic hydrogen evolution and possible development of g-C3N4 materials are shared with the researchers interested in the relevant fields hereinto.

A label-free electrochemical sensor constructed with layer-by-layer assembly of GCE-AuNPs-Q[7]·HAuCl4 for detection of diphenylamine.

Metal-organic frameworks (MOFs) including cucurbit[7]uril block (Q[7]·HAuCl4) were employed to develop a diphenylamine (DPA) sensor in electrochemical method, the presence of HAuCl4 improved the conductivity of the macrocyclic compound. To further enhance of the sensitivity, Au nanoparticles were inserted between the surface of glassy carbon electrode and Q[7]·HAuCl4 MOFs (GCE-AuNPs-Q[7]·HAuCl4). Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were applied for evaluation on the electrochemical behavior. For the electrochemical inertness of DPA, a label-free electrochemical sensor in 5 mM K3[Fe(CN)6] solution was achieved, to produce a limit of detection as low as 4.6 µM in a linear range of 5-1000 µM with good reproducibility, high stability and acceptable anti-interference ability. Application of the proposed electrode for the quantitative determination of DPA in tap water and apple juice confirms its real value.

Improved electrochemical properties of polypyrrole with cucurbit[6]uril via supramolecular interactions.

A supramolecular polymer was developed through the encapsulation of polypyrrole by cucurbit[6]uril (PPy@Q[6]), which was employed as the electrode material to improve the capacitor ability of conductive polypyrrole. In the optimized ratio of 2 : 1 (CPPy : CQ[6]), the capacitor properties of the supramolecular material were evaluated, and a high specific capacitance of 414 F g-1 at 10 mV s-1 was obtained, which was 3.1 times higher than that of pure polypyrrole (132 F g-1). A comprehensive analysis suggested that the capacitance performances should be relevant to the component, surface area, and pore volume of the materials. The addition of 0.4 M Fe2(SO4)3 into the electrolyte provided a surprising specific capacitance of 3530 F g-1 on the cucurbituril-encapsulated polypyrrole electrode material, with a high energy density of 707 W h kg-1 at a power density of 32 000 W kg-1 and a current density of 8 A g-1. The 81.6% capacitance retention maintained after 1000 cycles revealed the acceptable cycling capacity of the proposed supramolecular supercapacitor system, which demonstrated good performance even at a low temperature of -20 °C.

Synthesis of a novel aminobenzene-containing hemicucurbituril and its fluorescence spectral properties with ions.

A novel hemicucurbituril-based macrocycle, alternately consisting of amidobenzene and 2-imidazolidione moieties was designed and synthesized. Based on the fragment coupling strategy, nitrobenzene-containing hemicucurbituril was firstly prepared facilely under alkaline environment, and reduction of the nitro groups produced the desired amidobenzene-containing hemicucurbituril. As an original fluorescent chemosensor, it exhibited strong interactions with Fe3+ over other metal cations. The experimental evidence of fluorescence spectra suggested that a 1:1 complex was formed between this macrocycle and Fe3+ with an association constant up to (2.1 ± 0.3) × 104 M-1. Meanwhile, this macrocycle showed no obvious or only slight enhancement of the fluorescence intensity with selected anions.

Cucurbit[n]uril-Based Supramolecular Frameworks Assembled through Outer-Surface Interactions.

Porous materials, especially metal-organic frameworks, covalent organic frameworks, and supramolecular organic frameworks, are widely used in heterogeneous catalysis, adsorption, and ion exchange. Cucurbit[n]urils (Q[n]s) suitable building units for porous materials because they possess cavities with neutral electrostatic potential, portal carbonyls with negative electrostatic potential, and outer surfaces with positive electrostatic potential, which may result in the formation of Q[n]-based supramolecular frameworks (QSFs) assembled through the interaction of guests within Q[n]s, the coordination of Q[n]s with metal ions, and outer-surface interaction of Q[n]s (OSIQ). This review summarizes the various QSFs assembled via OSIQs. The QSFs can be classified as being assembled by 1) self-induced OSIQ, 2) anion-induced OSIQ, and 3) aromatic-induced OSIQ. The design and construction of QSFs with novel structures and specific functional properties may establish a new research direction in Q[n] chemistry.

A high-sensitive sensor with HEPES-enhanced electrochemiluminescence of benzo[3]uril for Fe3+ and its application in human serum.

An electrochemiluminescence (ECL) sensor based on a benzo[3]uril-modified glassy carbon electrode with sensitized luminescence, with the coexistence of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) as the coreactant, was successfully constructed. The sensitization mechanism was proposed by analyzing the results of the control experiments for establishing the relationship of the luminescence effect with the concentration of HEPES. Under the optimized conditions, the fabricated sensor system was applied for the detection of Fe3+ in an aqueous solution with good sensitivity and selectivity. A low detection limit of 0.41 nM was achieved, indicating superior sensor performance over the previous analytical methods. The ECL sensor system was employed for the detection of Fe3+ in human serum samples to produce excellent recoveries ranging from 96.17% to 101.81%.

The high selective chemo-sensors for TNP based on the mono- and di-substituted multifarene[2,2] with different fluorescence quenching mechanism.

The chem-sensors, based on the triazole-CH2-anthracene-functionalized multifarene[2,2] were successfully synthesized, which could efficiently and rapidly detect 2,4,6-trinitrophenol (TNP). The high specificities of the proposed macrocyclic sensors were achieved by selective response for TNP in the existence of other competing phenolic compounds, and the limits of detection in ∼10-8 mol/L range were produced to confirm the high sensitivities of the chem-sensors, which could be attributed to the mechanism of electron and resonance energy transfer processes in the complexes with the supramolecular interactions. 1H NMR titration analysis revealed the actual binding position should be the triazole rings of sensors with the hydroxyl group on TNP to offer a hydrogen bonding. The extraordinary sensing properties endued the compounds as sensitive fluorometric chem-sensors for the potential application of TNP detection.

Recognition of silver cations by multifarene[2,2] chemosensors with unexpected fluorescence response.

Fluorescent chemosensors based on a new macrocyclic compound, multifarene[2,2], with modification by triazole-linked pyrene or anthracene were synthesized. These macrocyclic sensors exhibited high affinity and selectivity toward Ag+ over other metal ions, with ratiometric or enhanced response of their fluorescence emissions depending upon the substituent species for coordination to Ag+, and an unexpected response to a concentration threshold of the metal cations was discovered. The experimental evidences of fluorescence spectra, 1H NMR titration, IR spectra, and high-resolution mass spectra suggested the coordination behaviors of the sensors with Ag+, that is, the 1:1 complexes were formed with moderate association constants of about 105 L·mol-1, and the sulfur atoms on macrocyclic ligand should affinite to the metal cations. Energy-minimized structures and frontier orbitals were estimated by quantum chemical calculations with a view to rationalizing the fluorescence response of the multifarene[2,2] sensors upon binding to Ag+.

Erratum: Chen, L.X., et al. Synthesis and Structure of the Inclusion Complex {NdQ[5]K@Q[10](H2O)4}•4NO3•20H2O. Molecules 2017, 22, 1147.

The authors wish to make the following correction to their paper [...].

A fluorescence-enhanced chemosensor based on multifarene[2,2] and its recognition of metal cations.

A selective and sensitive fluorescent chemosensor based on an anthracene-functionalized triazole-linked multifarene[2,2] was successfully synthesized and investigated with regard to the recognition of metal ions using fluorescence spectroscopy, 1H NMR titration, and IR spectroscopy. The proposed sensor exhibited desirable properties for potential fluorescence enhanced chemosensor applications, including selective affinity and low Zn2+ and Cd2+ detection limits compared with other metal ions. Quantum chemical calculations described the synthesized chemosensor's static structure and its coordination to Zn2+ and Cd2+. Frontier molecular orbital distribution and energy changes suggested a possible mechanism for increased receptor fluorescence intensity with Zn2+ and Cd2+ addition.

A New Member of the Inverted Cucurbit[n]uril Family.

A new inverted cucurbituril, namely inverted hexamethylcucurbit[3,3]uril (iMe6 Q[3,3]), has been isolated and characterized. It incorporates a single inverted un-substituted glycoluril unit oriented towards the interior of the cavity, shows good solubility in water and organic solvents (DMSO), and exhibits different selectivity for guests to those of iQ[6] and other known Q[6]s.

Synthesis and Structure of the Inclusion Complex {NdQ[5]K@Q[10](H2O)4}·4NO3·20H2O.

Heating a mixture of Nd(NO3)3·6H2O, KCl, Q[10] and Q[5] in HCl for 10 min affords the inclusion complex {NdQ[5]K@Q[10](H2O)4}·4NO3·20H2O. The structure of the inclusion complex has been investigated by single crystal X-ray diffraction and by X-ray Photoelectron spectroscopy (XPS).