Clopidogrel-loaded vascular grafts prepared using digital light processing 3D printing.

The leading cause of death worldwide and a significant factor in decreased quality of life are the cardiovascular diseases. Endovascular operations like angioplasty, stent placement, or atherectomy are often used in vascular surgery to either dilate a narrowed blood artery or remove a blockage. As an alternative, a vascular transplant may be utilised to replace or bypass a dysfunctional or blocked blood vessel. Despite the advancements in endovascular surgery and its popularisation over the past few decades, vascular bypass grafting remains prevalent and is considered the best option for patients in need of long-term revascularisation treatments. Consequently, the demand for synthetic vascular grafts composed of biocompatible materials persists. To address this need, biodegradable clopidogrel (CLOP)-loaded vascular grafts have been fabricated using the digital light processing (DLP) 3D printing technique. A mixture of polylactic acid-polyurethane acrylate (PLA-PUA), low molecular weight polycaprolactone (L-PCL), and CLOP was used to achieve the required mechanical and biological properties for vascular grafts. The 3D printing technology provides precise detail in terms of shape and size, which lead to the fabrication of customised vascular grafts. The fabricated vascular grafts were fully characterised using different techniques, and finally, the drug release was evaluated. Results suggested that the performed 3D-printed small-diameter vascular grafts containing the highest CLOP cargo (20% w/w) were able to provide a sustained drug release for up to 27 days. Furthermore, all the CLOP-loaded 3D-printed materials resulted in a substantial reduction of the platelet deposition across their surface compared to the blank materials containing no drug. Haemolysis percentage for all the 3D-printed samples was lower than 5%. Moreover, 3D-printed materials were able to provide a supportive environment for cellular attachment, viability, and growth. A substantial increase in cell growth was detected between the blank and drug-loaded grafts.

Vascular organoids: unveiling advantages, applications, challenges, and disease modelling strategies.

Understanding mechanisms and manifestations of cardiovascular risk factors, including diabetes, on vascular cells such as endothelial cells, pericytes, and vascular smooth muscle cells, remains elusive partly due to the lack of appropriate disease models. Therefore, here we explore different aspects for the development of advanced 3D in vitro disease models that recapitulate human blood vessel complications using patient-derived induced pluripotent stem cells, which retain the epigenetic, transcriptomic, and metabolic memory of their patient-of-origin. In this review, we highlight the superiority of 3D blood vessel organoids over conventional 2D cell culture systems for vascular research. We outline the key benefits of vascular organoids in both health and disease contexts and discuss the current challenges associated with organoid technology, providing potential solutions. Furthermore, we discuss the diverse applications of vascular organoids and emphasize the importance of incorporating all relevant cellular components in a 3D model to accurately recapitulate vascular pathophysiology. As a specific example, we present a comprehensive overview of diabetic vasculopathy, demonstrating how the interplay of different vascular cell types is critical for the successful modelling of complex disease processes in vitro. Finally, we propose a strategy for creating an organ-specific diabetic vasculopathy model, serving as a valuable template for modelling other types of vascular complications in cardiovascular diseases by incorporating disease-specific stressors and organotypic modifications.

Effects of non-coding RNAs and RNA-binding proteins on mitochondrial dysfunction in diabetic cardiomyopathy.

Vascular complications are the main cause of diabetes mellitus-associated morbidity and mortality. Oxidative stress and metabolic dysfunction underly injury to the vascular endothelium and myocardium, resulting in diabetic angiopathy and cardiomyopathy. Mitochondrial dysfunction has been shown to play an important role in cardiomyopathic disruptions of key cellular functions, including energy metabolism and oxidative balance. Both non-coding RNAs and RNA-binding proteins are implicated in diabetic cardiomyopathy, however, their impact on mitochondrial dysfunction in the context of this disease is largely unknown. Elucidating the effects of non-coding RNAs and RNA-binding proteins on mitochondrial pathways in diabetic cardiomyopathy would allow further insights into the pathophysiological mechanisms underlying diabetic vascular complications and could facilitate the development of new therapeutic strategies. Stem cell-based models can facilitate the study of non-coding RNAs and RNA-binding proteins and their unique characteristics make them a promising tool to improve our understanding of mitochondrial dysfunction and vascular complications in diabetes.

RNA-Binding Proteins: Emerging Therapeutics for Vascular Dysfunction.

Vascular diseases account for a significant number of deaths worldwide, with cardiovascular diseases remaining the leading cause of mortality. This ongoing, ever-increasing burden has made the need for an effective treatment strategy a global priority. Recent advances in regenerative medicine, largely the derivation and use of induced pluripotent stem cell (iPSC) technologies as disease models, have provided powerful tools to study the different cell types that comprise the vascular system, allowing for a greater understanding of the molecular mechanisms behind vascular health. iPSC disease models consequently offer an exciting strategy to deepen our understanding of disease as well as develop new therapeutic avenues with clinical translation. Both transcriptional and post-transcriptional mechanisms are widely accepted to have fundamental roles in orchestrating responses to vascular damage. Recently, iPSC technologies have increased our understanding of RNA-binding proteins (RBPs) in controlling gene expression and cellular functions, providing an insight into the onset and progression of vascular dysfunction. Revelations of such roles within vascular disease states have therefore allowed for a greater clarification of disease mechanisms, aiding the development of novel therapeutic interventions. Here, we discuss newly discovered roles of RBPs within the cardio-vasculature aided by iPSC technologies, as well as examine their therapeutic potential, with a particular focus on the Quaking family of isoforms.

3D-printed reservoir-type implants containing poly(lactic acid)/poly(caprolactone) porous membranes for sustained drug delivery.

Implantable drug delivery systems are an interesting alternative to conventional drug delivery systems to achieve local or systemic drug delivery. In this work, we investigated the potential of fused-deposition modelling to prepare reservoir-type implantable devices for sustained drug delivery. An antibiotic was chosen as a model molecule to evaluate the potential of this type of technology to prepare implants on-demand to provide prophylactic antimicrobial treatment after surgery. The first step was to prepare and characterize biodegradable rate-controlling porous membranes based on poly(lactic acid) (PLA) and poly(caprolactone) (PCL). These membranes were prepared using a solvent casting method. The resulting materials contained different PLA/PCL ratios. Cylindrical implants were 3D-printed vertically on top of the membranes. Tetracycline (TC) was loaded inside the implants and drug release was evaluated. The results suggested that membranes containing a PLA/PCL ratio of 50/50 provided drug release over periods of up to 25 days. On the other hand, membranes containing lower PCL content did not show a porous structure and accordingly the drug could not permeate to the same extent. The influence of different parameters on drug release was evaluated. It was established that film thickness, drug content and implant size are critical parameters as they have a direct influence on drug release kinetics. In all cases the implants were capable of providing drug release for at least 25 days. The antimicrobial properties of the implants were evaluated against E. coli and S. aureus. The resulting implants showed antimicrobial properties at day 0 and even after 21 days against both type of microorganisms. Finally, the biocompatibility of the implants was evaluated using endothelial cells. Cells exposed to implants were compared with a control group. There were no differences between both groups in terms of cell proliferation and morphology.

Development of drug loaded cardiovascular prosthesis for thrombosis prevention using 3D printing.

Cardiovascular disease (CVD) is a general term for conditions which are the leading cause of death in the world. Quick restoration of tissue perfusion is a key factor to combat these diseases and improve the quality and duration of patients' life. Revascularization techniques include angioplasty, placement of a stent, or surgical bypass grafting. For the latter technique, autologous vessels remain the best clinical option; however, many patients lack suitable autogenous due to previous operations and they are often unsuitable. Therefore, synthetic vascular grafts providing antithrombosis, neointimal hyperplasia inhibition and fast endothelialization are still needed. To address these limitations, 3D printed dipyridamole (DIP) loaded biodegradable vascular grafts were developed. Polycaprolactone (PCL) and DIP were successfully mixed without solvents and then vascular grafts were 3D printed. A mixture of high and low molecular weight PCL was used to better ensure the integration of DIP, which would offer the biological functions required above. Moreover, 3D printing technology provides the ability to fabricate structures of precise geometries from a 3D model, enabling to customize the vascular grafts' shape or size. The produced vascular grafts were fully characterized through multiple techniques and the last step was to evaluate their drug release, antiplatelet effect and cytocompatibility. The results suggested that DIP was properly mixed and integrated within the PCL matrix. Moreover, these materials can provide a sustained and linear drug release without any obvious burst release, or any faster initial release rates for 30 days. Compared to PCL alone, a clear reduced platelet deposition in all the DIP-loaded vascular grafts was evidenced. The hemolysis percentage of both materials PCL alone and PCL containing 20% DIP were lower than 4%. Moreover, PCL and 20% DIP loaded grafts were able to provide a supportive environment for cellular attachment, viability, and growth.

Alternative Splicing: A Key Mediator of Diabetic Vasculopathy.

Cardiovascular disease is the leading cause of death amongst diabetic individuals. Atherosclerosis is the prominent driver of diabetic vascular complications, which is triggered by the detrimental effects of hyperglycemia and oxidative stress on the vasculature. Research has extensively shown diabetes to result in the malfunction of the endothelium, the main component of blood vessels, causing severe vascular complications. The pathogenic mechanism in which diabetes induces vascular dysfunction, however, remains largely unclear. Alternative splicing of protein coding pre-mRNAs is an essential regulatory mechanism of gene expression and is accepted to be intertwined with cellular physiology. Recently, a role for alternative splicing has arisen within vascular health, with aberrant mis-splicing having a critical role in disease development, including in atherosclerosis. This review focuses on the current knowledge of alternative splicing and the roles of alternatively spliced isoforms within the vasculature, with a particular focus on disease states. Furthermore, we explore the recent elucidation of the alternatively spliced QKI gene within vascular cell physiology and the onset of diabetic vasculopathy. Potential therapeutic strategies to restore aberrant splicing are also discussed.

RNA-Binding Proteins Hold Key Roles in Function, Dysfunction, and Disease.

RNA-binding proteins (RBPs) are multi-faceted proteins in the regulation of RNA or its RNA splicing, localisation, stability, and translation. Amassing proof from many recent and dedicated studies reinforces the perception of RBPs exerting control through differing expression levels, cellular localization and post-transcriptional alterations. However, since the regulation of RBPs is reliant on the micro-environment and events like stress response and metabolism, their binding affinities and the resulting RNA-RBP networks may be affected. Therefore, any misregulation and disruption in the features of RNA and its related homeostasis can lead to a number of diseases that include diabetes, cardiovascular disease, and other disorders such as cancer and neurodegenerative diseases. As such, correct regulation of RNA and RBPs is crucial to good health as the effect RBPs exert through loss of function can cause pathogenesis. In this review, we will discuss the significance of RBPs and their typical function and how this can be disrupted in disease.

Fused deposition modelling for the development of drug loaded cardiovascular prosthesis.

Cardiovascular diseases constitute a number of conditions which are the leading cause of death globally. To combat these diseases and improve the quality and duration of life, several cardiac implants have been developed, including stents, vascular grafts and valvular prostheses. The implantation of these vascular prosthesis has associated risks such as infection or blood clot formation. In order to overcome these limitations medicated vascular prosthesis have been previously used. The present paper describes a 3D printing method to develop medicated vascular prosthesis using fused deposition modelling (FDM) technology. For this purpose, rifampicin (RIF) was selected as a model molecule as it can be used to prevent vascular graft prosthesis infection. Thermoplastic polyurethane (TPU) and RIF were combined using hot melt extrusion (HME) to obtain filaments containing RIF concentrations ranging between 0 and 1% (w/w). These materials are capable of providing RIF release for periods ranging between 30 and 80 days. Moreover, TPU-based materials containing RIF were capable of inhibiting the growth of Staphylococcus aureus. This behaviour was observed even for TPU-based materials containing RIF concentrations of 0.1% (w/w). TPU containing 1% (w/w) of RIF showed antimicrobial properties even after 30 days of RIF release. Alternatively, these methods were used to prepare dipyridamole containing TPU filaments. Finally, using a dual extrusion 3D printer vascular grafts containing both drugs were prepared.

Diabetic endotheliopathy: RNA-binding proteins as new therapeutic targets.

Diabetic Endotheliopathy is widely regarded as a principal contributor to cardiovascular disease pathogenesis in individuals with Diabetes mellitus. The endothelium, the innermost lining of blood vessels, consists of an extensive monolayer of endothelial cells. Previously regarded as an interface, the endothelium is now accepted as an organ system with critical roles in vascular health; its dysfunction therefore is detrimental. Endothelial dysfunction induces blood vessel damage resulting in a restriction of blood and oxygen supply to tissues, the central pathology of cardiovascular disease. Hyperglycemic conditions have repeatedly been isolated as a pivotal inducer of endothelial cell dysfunction. Numerous studies have since proven hyperglycemic conditions to significantly alter the gene expression profile of endothelial cells, with this being largely attributable to the post-transcriptional regulation of RNA-binding proteins. In particular, the RBP Quaking-7 has recently emerged as a crucial mediator of diabetic endotheliopathy, with great potential to become a therapeutic target.