Morphological evidence of a potential arrhythmogenic substrate in the caudal and cranial vena cava in horses.

BACKGROUND: Three-dimensional electro-anatomical mapping, previously performed in horses with atrial arrhythmias, has demonstrated the medial region of the caudal vena cava (CaVC), 1-8 cm caudal to the fossa ovalis, as an anatomical predilection site for atrial tachycardia associated with areas of slow conduction and conduction block. Slow conduction has also been recorded in the cranial vena cava (CrVC). OBJECTIVES: To investigate the morphological characteristics of the myocardial sleeves (MS) in the CaVC and CrVC, in order to identify a potential substrate of right sided atrial arrhythmias. STUDY DESIGN: Cross sectional. METHODS: Post-mortem dissection of 37 hearts from adult warmblood horses without known cardiovascular disease. Macroscopic examination of the myocardial distribution, evaluated the MS area, length, width, and shape in the CaVC and the CrVC. At least 2 samples from each vena cava MS were histologically examined using Masson's trichrome staining. RESULTS: Myocardial sleeves into the medial CaVC and into the CrVC were observed in all horses and showed variations in distribution, shape, and size between horses. Their mean ± standard deviation length from the limbus into the CaVC reached 5.7 ± 1.0 cm (maximum 8.3 cm), and from the azygos vein into the CrVC 5.3 ± 1.6 cm (maximum 8.6 cm). Myocardium-free islands were observed in the CaVC and CrVC in 30% and 6% of horses, respectively. Histologically, MS showed a non-uniform myocardial fibre arrangement, with presence of fibroadipose tissue, features known to result in slow conduction and pro-arrhythmia. MAIN LIMITATIONS: Study only included horses without history of atrial arrhythmia. CONCLUSIONS: Myocardial sleeves are present in both CaVC and CrVC, showing anatomical variations between horses. Tissue characteristics known to favour re-entry were identified indicating that these venae cavae MS are a potential substrate for atrial tachyarrhythmias and a target for treatment by ablation.

CONTEXTE: La modélisation électro-anatomique tridimensionnelle, réalisée auparavant chez des chevaux souffrant d'arythmies atriales, a démontré que la région médiale de la veine cave caudale (CaVC), 1-8 cm caudalement à la fossae ovalis, représente un site anatomique de prédilection pour la tachycardie auriculaire associée à des zones de conduction ralentie et des blocs de conduction. Une conduction ralentie a aussi été enregistrée dans la veine cave crâniale (CrVC). OBJECTIFS: Investiguer les caractéristiques morphologiques des manchons myocardiques (Myocardial sleeve;MS) dans les CAVC et CrVC, afin d'identifier un substrat potentiel d'arythmies atriales du côté droit du cœur. TYPE D'ÉTUDE: Étude transversale. MÉTHODES: Dissection post-mortem de 37 cœurs de chevaux à sang chaud adultes sans historique de maladie cardiovasculaire. Lors de l'examen macroscopique de la distribution myocardique, la surface des MS, leur longueur, largeur et forme ont été évaluées dans les CAVC et CrVC. Les MS ont été examinées microscopiquement dans au moins 2 échantillons de chaque veine cave, en utilisant la coloration de Masson Trichrome. RÉSULTATS: Les MS à l'aspect médial de la CaVC et à l'intérieur de la CrVC ont été inspectées chez tous les chevaux et ont montré des variations de distribution, forme et grandeur entre chevaux. Leur moyenne de longueur ± déviation standard du limbe de la fossae ovalis dans la CaVC était de 5.7 ± 1.0 cm (maximum 8.3 cm) et de la veine azygos dans la CrVC, de 5.3 ± 1.6 cm (maximum 8.6 cm). Des Îlots dénudés de myocarde ont été observé dans la CaVC et CrVC dans 30% et 6% des chevaux respectivement. À l'histologie, les MS ont montré des fibres myocardiques organisées de façon non-uniforme, avec présence de tissue fibroadipeux, caractéristiques connues pour entraîner une conduction lente et favoriser l'arythmie. LIMITES PRINCIPALES: Étude incluant seulement des chevaux sans historique d'arythmie atriale. CONCLUSION: Les MS sont présentes dans les CaVC et CrVC, démontrant les variations anatomiques entre chevaux. Des caractéristiques tissulaires connues pour favoriser une conduction ralentie ont été identifiés indiquant que les MS représentent un substrat potentiel des tachyarythmies atriales et une cible pour un traitement par ablation.

From Corrosion Casting to Virtual Dissection: Contrast-Enhanced Vascular Imaging using Hafnium Oxide Nanocrystals.

Vascular corrosion casting is a method used to visualize the three dimensional (3D) anatomy and branching pattern of blood vessels. A polymer resin is injected in the vascular system and, after curing, the surrounding tissue is removed. The latter often deforms or even fractures the fragile cast. Here, a method is proposed that does not require corrosion, and is based on in situ micro computed tomography (micro-CT) scans. To overcome the lack of CT contrast between the polymer cast and the animals' surrounding soft tissue, hafnium oxide nanocrystals (HfO2 NCs) are introduced as CT contrast agents into the resin. The NCs dramatically improve the overall CT contrast of the cast and allow for straightforward segmentation in the CT scans. Careful design of the NC surface chemistry ensures the colloidal stability of the NCs in the casting resin. Using only 5 m% of HfO2 NCs, high-quality cardiovascular casts of both zebrafish and mice can be automatically segmented using CT imaging software. This allows to differentiate even µ $\umu$ m-scale details without having to alter the current resin injection methods. This new method of virtual dissection by visualizing casts in situ using contrast-enhanced CT imaging greatly expands the application potential of the technique.

Diagnostic imaging descriptions and prevalence of presumed phrenic lymph nodes in dogs.

The phrenic lymph node (PLN) has been described in bovine, equine, and feline anatomic references but descriptions in canine anatomic references are currently lacking. Authors have observed a well-defined, soft tissue attenuating, contrast-enhancing structure in a location consistent with previous anatomic descriptions of the PLN in dogs that underwent thoracic CT for neoplastic staging. The aims of this two-part, retrospective/prospective, anatomic, prevalence study were (1) to describe the presence of a soft tissue structure close to the thoracic caudal vena cava, defined as the presumed PLN, in a series of dogs that underwent CT as part of the staging for metastatic disease; (2) to confirm the lymphatic origin of the presumed PLN in a dog through postmortem examination; (3) to assess the prevalence of the presumed PLN in a population of dogs that underwent thoracic CT or MRI for different clinical purposes; and (4) to assess the possibility to visualize the presumed PLN with ultrasonography. The lymphatic origin of the presumed PLN was confirmed by postmortem examination in one dog. The presumed PLN was visible in 29 of 777 canine CT examinations (prevalence 3.7%). The presumed PLN was not visible in 9 of 10 prospectively recruited ultrasound cases. Most dogs with visible presumed PLNs were large-medium breeds that were presented for neoplastic staging purposes. Findings indicated that a structure consistent with the previously reported anatomic features of PLN in cattle, horses, and cats may be detected with a low prevalence in canine CT and MRI examinations.

Multicomponent Acrylic Formulation Design for Corrosion Casting with Controlled Mechanical Properties.

Corrosion casting based on the curing of acrylic resins enables one to create casts as replicas of body systems, enhancing our knowledge of veterinary medicine. The identification of the optimal chemical formulations as well as the processing conditions, the delivery of good control during the liquid state and the excellent macroscopic properties during solidification and after use are remaining challenges. In the present work, based on the identification of more qualitative trends, it is demonstrated that multicomponent comonomer mixtures are interesting materials that can be used to expand the range of mechanical properties and can specifically result in a better balance between stiffness and flexibility while guaranteeing dimensional stability. Emphasis is put on a large pool of formulations in the testing phase to then perform a detailed mechanical flexural analysis for the most promising cases during a more rigorous testing phase, accounting for a new pragmatic protocol for the pot life. This protocol consists of a vial-based turning test and a measurement of the viscosity variation up to 1000 mPa∙s and highlights the complex interplay between the overall initial concentrations and the impact of the absence of mixing once the system is at rest. It is demonstrated that the use of only low-molar-mass crosslinkers should be avoided, and overall, an intermediate amount of crosslinkers is recommendable.

Age estimation of puppies based on the radiographically assessed development of ossification centres in the carpal and metacarpal regions.

BACKGROUND: The need for proper age determination in puppies has increased enormously due to the growing illegal trade in puppies that are too young to be removed from the litter or too young to have been properly vaccinated against rabies. METHODS: Dorsopalmar and mediolateral radiographs of the (meta)carpal region, either taken from puppy cadavers or from the Faculty's patient database, were studied in a cross-sectional study of 252 puppies of various sizes, aged 6-212 days. The appearance and development of ossification centres as a function of age in five regions of interest in the (meta)carpal region were scored using a two- to six-step scoring system based on shape and delineation. RESULTS: A positive correlation with age was found for all investigated regions. Intra- and interrater agreement between two observers was excellent, except for the distal epiphyses of the metacarpal bones. Postnatal ossification started after the second week of life with the carpal bones, closely followed by the radial trochlea. All ossification centres were present in all puppies from 84 days, except for the sesamoid bone in the tendon of the long abductor muscle of the first digit. Timing of appearance differed significantly between different sized breeds. There were no significant differences between the sexes. LIMITATIONS: Age distribution was not balanced for all breed size classes. CONCLUSIONS: The radiographic timing of the appearance and development of ossification centres in the carpal region is a promising method for age estimation in puppies.

Time and sequence of the replacement of the deciduous by the permanent dentition in dogs and its applicability for age estimation.

This study investigated the influence of several covariates on the time and sequence of permanent dentition emergence following exfoliation of the deciduous teeth in puppies. The aim was to determine whether the emergence of permanent dentition can be used to assess whether a puppy that is traded across borders in the EU has reached the legally required minimum age of 15 weeks. The events were evaluated in a longitudinal study, with some cross-sectional observations, of 440 puppies belonging to 82 breeds. No significant differences were found between the left and right sides of a puppy's dentition nor between male and female puppies. Breed size and skull type had a significant impact: both the appearance and the completion of tooth eruption occurred considerably later in small or toy breeds and brachycephalic skull type breeds. The sequence of emergence differed little between maxillary or mandibular quadrants or between breeds. The first emerging elements were the maxillary first premolars or first incisors or the mandibular first incisors. The emergence of a permanent tooth usually occurred within 3 days before or after exfoliation of its precursor, except for the canines, which demonstrated a wider tooth replacement interval. This study presents standards for age assessment based on the emergence of permanent dentition for breeds of different sizes, using median ages or cumulative emergence percentages. However, the legal age determination of puppies with an assumed age of 15 weeks cannot be performed based on permanent dentition emergence, as this occurred at a later age in a large proportion of dogs (at least 95%) in our studied population. The probability of being at least 15 weeks old when at least one maxillary tooth has emerged was at least 72.25%, depending on breed size.

Scapular morphology of great apes and humans: A three-dimensional computed tomography-based comparative study.

The primate scapula has been studied widely since its shape has been shown to correlate with how the forelimb is used in daily activities. In this study, we expand on the existing literature and use an image-based methodology that was originally developed for orthopaedic practice to quantify and compare the three-dimensional (3D) morphology of the scapula across humans and great apes. We expect that this image-based approach will allow us to identify differences between great apes and humans that can be related to differences in mobility and loading regime of the shoulder. We hypothesize that gorillas and chimpanzees will have a similar scapular morphology, geared towards stability and weight-bearing in knuckle-walking, whilst the scapular morphology of orangutans is expected to be more similar to that of humans given their high glenohumeral mobility associated with their suspensory lifestyle. We made 3D reconstructions of computed tomography scans of 69 scapulae from four hominid genera (Pongo, Gorilla, Pan and Homo). On these 3D bone meshes, the inferior glenoid plane was determined, and subsequently, a set of bony landmarks on the scapular body, coracoid, and acromion were defined. These landmarks allowed us to measure a set of functionally relevant angles which represent acromial overhang, subacromial space and coracoacromial space. The angles that were measured are: the delto-fulcral triangle (DFT), comprising the alpha, beta, and delta angle, the acromion-glenoid angle (AGA), the coracoid-glenoid centre-posterior acromial angle (CGA), the anterior tilt (TA CGA) and the posterior tilt of the CGA (PT CGA). Three observers placed the landmarks on the 3D bone meshes, allowing us to calculate the inter-observer error. The main differences in the DFT were found between humans and the great apes, with small differences between the great apes. The DFT of humans was significantly lower compared to that of the great apes, with the smallest alpha (32.7°), smallest delta (45.7°) and highest beta angle (101.6°) of all genera. The DFT of chimpanzees was significantly higher compared to that of humans (p < 0.01), with a larger alpha (37.6°) and delta angle (54.5°) and smaller beta angle (87.9°). The mean AGA of humans (59.1°) was significantly smaller (p < 0.001) than that of gorillas (68.8°). The mean CGA of humans (110.1°) was significantly higher (p < 0.001) than in orangutans (92.9°). Humans and gorillas showed mainly a posterior tilt of their coracoacromial complex whilst chimpanzees showed mainly an anterior tilt. The coracoacromial complex of the orangutans was not tilted anteriorly or posteriorly. With our image-based method, we were able to identify morphological features of the scapula that differed significantly between hominid genera. However, we did not find an overall dichotomy in scapular morphology geared towards high stability (Pan/Gorilla) or high mobility (Homo/Pongo). Further research is needed to investigate the functional implications of these differences in scapular morphology.

Time and sequence of emergence of the deciduous dentition in dogs and its applicability for age estimation.

This study investigated the influence of several covariates on the time and sequence of deciduous dentition emergence in puppies. Data were obtained in a longitudinal study, with some cross-sectional observations, of 1001 puppies of 53 dog breeds. A parametric proportional hazards survival model was used to estimate median emergence time and evaluate the effect of the covariates. No significant differences were found between the left and right sides of a puppy's dentition, but differences were statistically significant for the earlier appearance of maxillary incisors and canines and later appearance of maxillary premolars compared with their mandibular counterparts. The tendency for delayed onset and completion of emergence in female compared to male puppies was statistically but not clinically significant. The differences between puppies of breeds of different size or skull type were both statistically and clinically significant, with small and brachycephalic breeds showing later emergence times, longer clinical eruption times and more individual variation. Per quadrant, regardless of dog breed, canines or incisors were usually the first teeth to emerge and fully erupt, followed by premolars in the order Pd3 > 4 > 2. The maxillary canines and incisors usually emerged earlier than mandibular canines. Age estimation standards for breed size groups are presented based on the number of emerged teeth per quadrant. To assess whether a puppy has reached the legally required minimum age of 8 weeks to leave the litter, the best predictive capability using the data from this study is obtained when assessing the emergence status of the deciduous third premolars.

Age estimation in young dogs by radiographic assessment of the canine pulp cavity/tooth width ratio.

Age estimation in adult dogs can be performed by the radiographic measurement of the tooth pulp cavity, but the technique has hardly been described. In this study, the application of measuring pulp/tooth width ratios (P/T ratios) of the maxillary canine teeth was investigated. Pulp and tooth widths were measured at two locations on 166 maxillary canine teeth of the heads of 84 dog cadavers, using digital extraoral lateral oblique open mouth radiographs. The dogs belonged to different breeds and sexes and had a known age between 194 and 1907 days (approximately 6 months - 5 years). Both at the cemento-enamel junction (CE) and the half-height of the tooth, a comparable non-linear regression with age was demonstrated. Measuring at the CE location was less hindered by wear or superimposition. No statistically significant difference according to sex and breed size and no clinically significant difference according to skull type was found. The highest predictable capacity was found in the youngest dogs until the age of 448 days, of which 84.4% of the canine teeth had a P/T ratio above 0.39. Our results demonstrate that measuring P/T ratios of canine teeth can be used in practice to assign dogs to age categories, with the highest accuracy in young adult dogs.

The sesamoid bone in the long abductor muscle tendon of the first digit in the dog.

The sesamoid bone in the tendon of the m. abductor digiti primi longus is considered present in most dog breeds and is described to be radiologically detectable at the level of the carpus from the age of 4 months. However, an extensive investigation of this sesamoid bone has not been conducted before. The aim of this study was therefore to determine its prevalence in different dog breeds, to describe its histological development, and to determine the age at which it becomes radiologically visible. The prevalence of the sesamoid bone was assessed on radiographic images of the carpus or by dissection of the carpal region in 743 adult dogs of 115 breeds. Its development was studied by dissection and histological analysis in 45 puppies and its timing of radiological appearance was evaluated in 209 puppies. At least one sesamoid bone was present in all adult dogs, except for 14 dogs of six breeds of predominantly the small breed category. The lowest prevalence rate of 38.46% was exhibited in the French bulldog. The histological development could be divided into five stages. The first radiographic appearance corresponded to the coalescence of smaller ossification centers into one big nucleus (stage 4). The mean time of radiographic appearance was 108.4 days. This study provides extensive data on the prevalence and timing of the radiographic appearance of a sesamoid at the carpus of the dog. The data on radiographic appearance may be helpful in the age estimation of puppies.

Combining Chromatographic, Rheological, and Mechanical Analysis to Study the Manufacturing Potential of Acrylic Blends into Polyacrylic Casts.

Polyacrylics have been considered for a broad range of material applications, including coatings, dental applications, and adhesives. In this experimental study, the casting potential of a group of (co)monomers belonging to the acrylic family has been explored to enable a more sustainable use of these polymer materials in the medical and veterinary science field. The individual contributions of each comonomer have been analyzed, the reaction conversion has been studied via gas chromatography (GC), the rheological behavior has been characterized via stress-controlled measurements, and the final mechanical properties have been obtained from tensile, flexure, and impact tests. The GC results allow assessing the pot life and thus the working window of the casting process. For the rheological measurements, which start from low-viscous mixtures, a novel protocol has been introduced to obtain accurate absolute data. The rheological data reflect the time dependencies of the GC data but facilitate a more direct link with the macroscopic material data. Specifically, the steep increase in the viscosity with increasing reaction time for the methyl methacrylate (MMA)/ethylene glycol dimethyl methacrylate (EGDMA) case (2% crosslinker) allows maximizing several mechanical properties: the tensile/flexure modulus, the tensile/flexure stress at break, and the impact strength. This opens the pathway to more dedicated chemistry design for corrosion casting and polyacrylic material design in general.

Description of different ultrasound guided transversus abdominis plane block in pig cadavers - A pilot study.

OBJECTIVE: To develop an ultrasound (US)-guided transversus abdominis plane (TAP) block in pigs. STUDY DESIGN: Prospective, descriptive, experimental study. ANIMALS: A total of 26 hemi-abdomens belonging to 13 Seghers Hybrid cadavers. METHODS: The study consisted of two parts. In part 1, a preliminary anatomical understanding of the abdominal wall innervation in pigs was established (two hemi-abdomens of one pig). Part 2 was divided into three phases, and a US-guided TAP technique using methylene blue dye (0.3 mL kg-1 for each hemi-abdomen) was developed. In chronological order, a pilot study (phase I) was conducted to establish good injection points (four hemi-abdomens). In phase II a two-point injection technique (10 hemi-abdomens) was performed. A cranial injection was made at two-thirds of the distance between the xyphoid process and the iliac crest, immediately ventral to the rib arch. A caudal injection was performed ventral to the last rib. In phase III a three-point injection technique was performed (10 hemi-abdomens) with an extra injection point halfway between the cranial and caudal injection point. Staining of the different nerves was recorded during dissection. RESULTS: In part 1 the nerves innervating the pig's abdominal wall, thoracic vertebrae 12-16 (T12-16) and lumbar vertebrae 1-3 (L1-3), were identified. In part 2, data from the pilot study, adequate nerve staining with the two- or three-point injection technique, were obtained in T12 (29 versus 45% respectively), T13 (29 versus 100%), T14 (73 versus 45%), T15 (75 versus 78%), T16 (58 versus 78%), L1 (100 versus 75%), L2 (88 versus 84%) and L3 (23 versus 0%). CONCLUSIONS AND CLINICAL RELEVANCE: US-guided TAP block can be used in swine but only a moderate success rate for adequate nerve staining was achieved in this study. Further studies are necessary to determine a correct injection volume and assess clinical intra- and postoperative efficacy.

The shrimp nephrocomplex serves as a major portal of pathogen entry and is involved in the molting process.

Viruses, such as white spot syndrome virus, and bacteria, such as Vibrio species, wreak havoc in shrimp aquaculture [C. M. Escobedo-Bonilla et al., J. Fish. Dis. 31, 1-18 (2008)]. As the main portal of entry for shrimp-related pathogens remain unclear, infectious diseases are difficult to prevent and control. Because the cuticle is a strong pathogen barrier, regions lacking cuticular lining, such as the shrimp's excretory organ, "the antennal gland," are major candidate entry portals [M. Corteel et al., Vet. Microbiol. 137, 209-216 (2009)]. The antennal gland, up until now morphologically underexplored, is studied using several imaging techniques. Using histology-based three-dimensional technology, we demonstrate that the antennal gland resembles a kidney, connected to a urinary bladder with a nephropore (exit opening) and a complex of diverticula, spread throughout the cephalothorax. Micromagnetic resonance imaging of live shrimp not only confirms the histology-based model, but also indicates that the filling of the diverticula is linked to the molting cycle and possibly involved therein. Based on function and complexity, we propose to rename the antennal gland as the "nephrocomplex." By an intrabladder inoculation, we showed high susceptibility of this nephrocomplex to both white spot syndrome virus and Vibrio infection compared to peroral inoculation. An induced drop in salinity allowed the virus to enter the nephrocomplex in a natural way and caused a general infection followed by death; fluorescent beads were used to demonstrate that particles may indeed enter through the nephropore. These findings pave the way for oriented disease control in shrimp.

The blue mussel inside: 3D visualization and description of the vascular-related anatomy of Mytilus edulis to unravel hemolymph extraction.

The blue mussel Mytilus edulis is an intensely studied bivalve in biomonitoring programs worldwide. The lack of detailed descriptions of hemolymph-withdrawal protocols, particularly with regard to the place from where hemolymph could be perfused from, raises questions regarding the exact composition of aspirated hemolymph and does not exclude the possibility of contamination with other body-fluids. This study demonstrates the use of high resolution X-ray computed tomography and histology combined with 3D-reconstruction using AMIRA-software to visualize some important vascular-related anatomic structures of Mytilus edulis. Based on these images, different hemolymph extraction sites used in bivalve research were visualized and described, leading to new insights into hemolymph collection. Results show that hemolymph withdrawn from the posterior adductor muscle could be extracted from small spaces and fissures between the muscle fibers that are connected to at least one hemolymph supplying artery, more specifically the left posterior gastro-intestinal artery. Furthermore, 3D-reconstructions indicate that puncturing hemolymph from the pericard, anterior aorta, atria and ventricle in a non-invasive way should be possible. Hemolymph withdrawal from the heart is less straightforward and more prone to contamination from the pallial cavity. This study resulted simultaneously in a detailed description and visualization of the vascular-related anatomy of Mytilus edulis.

Corrosion casting in anatomy: Visualizing the architecture of hollow structures and surface details.

Corrosion casting is the technique by which a solid, negative replica is created from a hollow anatomical structure and liberated from its surrounding tissues. For centuries, different types of hardening substances have been developed to create such casts, but nowadays, thermosetting polymers are mostly used as casting medium. Although the principle and initial set-up are relatively easy, producing high-quality casts that serve their intended purpose can be quite challenging. This paper evaluates some of the more popular casting resins that are currently available and provides a step-by-step overview of the corrosion casting procedure, including surface casts of anatomical structures. Hurdles and pitfalls are discussed, along with possible solutions to circumvent them, based on personal experience by the authors.

Intussusceptive Pillar Formation in Developing Porcine Glomeruli.

BACKGROUND/AIMS: Intussusceptive angiogenesis (IA) is a dynamic process which contributes to vascular expansion and remodeling. Intraluminal pillars have long been the distinctive structural indicator of IA. However, the mechanism of their formation has not been fully elucidated. METHODS: Using light and electron microscopy, we studied intussusceptive vascular growth in the developing porcine metanephric kidney. RESULTS: We observed intraluminal pillars formed by endothelial cells in the vasculature of developing glomeruli. Their diameter was < 2.5 µm, consistent with the diameter of nascent pillars. TEM revealed that the majority of these pillars consisted only of endothelium. However, a central core of extracellular matrix (ECM) covered by endothelium, reminiscent of a more mature intussusceptive pillar, was also found in the lumen of a glomerular capillary. Perivascular cells or pericytes were not involved in the pillar structure during these stages of formation. CONCLUSION: This study shows ECM presence in a mature intussusceptive pillar without any perivascular cell involvement in the structure. This leads to the hypothesis that ECM deposition precedes the participation of these cells in the formation of intraluminal pillars during IA in porcine metanephric glomerular capillaries.

Facile and Low-Cost Route for Sensitive Stretchable Sensors by Controlling Kinetic and Thermodynamic Conductive Network Regulating Strategies.

Highly sensitive conductive polymer composites (CPCs) are designed employing a facile and low-cost extrusion manufacturing process for both low- and high-strain sensing in the field of, for example, structural health/damage monitoring and human body movement tracking. Focus is on the morphology control for extrusion-processed carbon black (CB)-filled CPCs, utilizing binary and ternary composites based on thermoplastic polyurethane (TPU) and olefin block copolymer (OBC). The relevance of the correct CB amount, kinetic control through a variation of the compounding sequence, and thermodynamic control induced by annealing is highlighted, considering a wide range of experimental (e.g., static and dynamic resistance/scanning electron microscopy/rheological measurements) and theoretical analyses. High CB mass fractions (20 m %) are needed for OBC (or TPU)-CB binary composites but only lead to an intermediate sensitivity as their conductive network is fully packed and therefore difficult to be truly destructed. Annealing is needed to enable a monotonic increase of the relative resistance with respect to strain. With ternary composites, a much higher sensitivity with a clearer monotonic increase results, provided that a low CB mass fraction (10-16 m %) is used and annealing is applied. In particular, with CB first dispersed in OBC and annealing, a less compact, hence, brittle conductive network (10-12 m % CB) is obtained, allowing high-performance sensing.

25-OH-vitamin D, parathyroid hormone, and calcium serum levels in captive common marmosets (Callithrix jacchus): Reference values and effect of age, sex, season, and closure of long bone epiphyses.

BACKGROUND: To date, reference values for 25-OH-vitamin D, parathyroid hormone (PTH), and calcium in serum of common marmosets (Callithrix jacchus) based on a large sample size are not available. METHODS: Serum reference values for these parameters were determined and correlated with sex, age, season of sampling, and time of long bone epiphyseal closure in captive-housed marmosets. RESULTS AND CONCLUSIONS: The 90% reference range for serum 25-OH-vitamin D is 47.40-370.4 nmol/L, for PTH 2.10-30.51 pmol/L, and for calcium 2.08-2.63 mmol/L. Lower levels of vitamin D were measured in fall compared with the other seasons. Levels of PTH were higher in males than in females, and calcium levels were lower in younger animals compared with older marmosets. No other effects of age, sex, season, or timing of growth plate closure were found.

A preliminary study of pulmonary vein implant applicability and safety as a potential ablation platform in a follow-up study in pigs.

BACKGROUND: Recurrence of atrial fibrillation after an ablation procedure remains a major problem which emphasizes the need for improved pulmonary vein isolation techniques. AIMS: The aim of this study was to describe an implantation procedure of a pulmonary vein-stent which may possibly serve as an ablation technique in the future and to examine stent safety in a follow-up study in pigs. METHODS AND RESULTS: Eight pigs were catheterized and nine self-expanding nitinol stents were implanted through a transfemoral or transatrial approach into the antra of the pulmonary veins. After 3 months' follow-up, the animals were euthanized for further examination. During the follow-up phase, no complications were observed. Absence of thrombus formation or pulmonary vein wall dissection was noticed during anatomical and histological evaluation of the heart-lung packages. All implants were almost completely covered by neo-intima, of which thickness varied between 0.2 and 3.9 mm. CONCLUSIONS: Stents can safely be positioned and deployed into the antra of the pulmonary veins without any acute or long-term (3 months) adverse effects. In the future, these implants could function as a permanently implanted ablation device and provide new therapeutic strategies for pulmonary vein isolation in patients with atrial fibrillation.

The development of lingual glands in the domestic duck (Anas platyrhynchos f. domestica): 3D-reconstruction, LM, and SEM study.

The major salivary glands of birds develop by branching or elongation of the epithelial cords. The development of the minor salivary glands in form of the lingual glands has never been described. Among birds, only Anatidae have three types of the lingual glands: rostral, caudo-lateral, and caudo-medial lingual glands. The study aims to characterize the manner and rate of the lingual glands development in the domestic duck and their topographical arrangement relative to the hyoid apparatus. The study reveals that all three types of the lingual glands develop by branching. We describe five stages of the lingual glands development in the domestic ducks: prebud, initial bud, pseudoglandular, canalicular, and terminal bud stage. The pattern of the lingual glands development in birds is similar to that described for mammals, with the exception, that the terminal buds are formed at the same time as the lumen of the glands. Generally, the rostral lingual gland starts to branch earlier than the caudal lingual glands. The 3D-reconstruction shows the location and direction of lingual gland development relative to the entoglossal cartilage and basibranchial bone. Light microscopy and scanning electron microscopy allow to characterize the histogenesis of the embryonic epithelium into glandular epithelium. At a time of hatching only secretory units of caudal lingual glands resemble the secretory units of the adult domestic duck. The rostral and caudo-lateral lingual glands are arranged on the sides of the entoglossal cartilage and basibranchial bone and caudo-madial lingual glands are located over the basibranchial bone. We suggest that such an arrangement of the lingual glands in the domestic duck is important during food intake and responsible for reduction of friction and formation of food bites.